mirrors/systemd
0
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-11-26 19:53:45 +08:00
Code Issues Packages Projects Releases Wiki Activity
b553abd8ae
systemd/units/meson.build

325 lines
16 KiB
Meson
Raw Normal View History

license: LGPL-2.1+ -> LGPL-2.1-or-later
2020-11-09 12:23:58 +08:00
# SPDX-License-Identifier: LGPL-2.1-or-later
Add license headers and SPDX identifiers to meson.build files So far I avoided adding license headers to meson files, but they are pretty big and important and should carry license headers like everything else. I added my own copyright, even though other people modified those files too. But this is mostly symbolic, so I hope that's OK.
2017-11-19 01:32:01 +08:00
dont install systemd-initctl, runlevel, telinit if no SYSV compat systemd-initctl executable is still built.
2020-04-29 05:11:55 +08:00
with_runlevels = conf.get('HAVE_SYSV_COMPAT') == 1
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
units = [
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['basic.target', ''],
units: introduce blockdev@.target for properly ordering mounts/swaps against cryptsetup Let's hook it into both cryptsetup-generator and gpt-auto-generator with a shared implementation in generator.c Fixes: #8472
2019-12-20 00:38:55 +08:00
['blockdev@.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['bluetooth.target', ''],
units: add generic boot-complete.target
2018-06-22 18:52:28 +08:00
['boot-complete.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['cryptsetup-pre.target', 'HAVE_LIBCRYPTSETUP'],
['cryptsetup.target', 'HAVE_LIBCRYPTSETUP',
'sysinit.target.wants/'],
veritysetup-generator: add support for veritytab This adds the support for veritytab. The veritytab file contains at most five fields, the first four are mandatory, the last one is optional: - The first field contains the name of the resulting verity volume; its block device is set up /dev/mapper/</filename>. - The second field contains a path to the underlying block data device, or a specification of a block device via UUID= followed by the UUID. - The third field contains a path to the underlying block hash device, or a specification of a block device via UUID= followed by the UUID. - The fourth field is the roothash in hexadecimal. - The fifth field, if present, is a comma-delimited list of options. The following options are recognized only: ignore-corruption, restart-on-corruption, panic-on-corruption, ignore-zero-blocks, check-at-most-once and root-hash-signature. The others options will be implemented later. Also, this adds support for the new kernel verity command line boolean option "veritytab" which enables the read for veritytab, and the new environment variable SYSTEMD_VERITYTAB which sets the path to the file veritytab to read.
2020-11-14 22:21:39 +08:00
['veritysetup-pre.target', 'HAVE_LIBCRYPTSETUP'],
['veritysetup.target', 'HAVE_LIBCRYPTSETUP',
'sysinit.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['dev-hugepages.mount', '',
'sysinit.target.wants/'],
['dev-mqueue.mount', '',
'sysinit.target.wants/'],
['emergency.target', ''],
['exit.target', ''],
['final.target', ''],
units: add first-boot-complete.target for first boot ordering Add a new target for synchronizing units that wish to run once during the first boot of the system. The machine-id will be committed to disk only after the target has been reached, thus ensuring that all units ordered before it had a chance to complete.
2020-09-07 03:23:36 +08:00
['first-boot-complete.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['getty.target', '',
'multi-user.target.wants/'],
units: introduce getty-pre.target (#6667) This new target is a passive unit, hence it is supposed to be pulled in to the transaction by the service that wants to block login on the console (e.g. text version of initial-setup). Now both getty and serial-getty are ordered after this target. https://lists.freedesktop.org/archives/systemd-devel/2015-July/033754.html
2017-08-31 17:20:14 +08:00
['getty-pre.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['graphical.target', '',
meson: simplify with_runlevels ternany op usage
2020-10-27 17:49:11 +08:00
'default.target' + (with_runlevels ? ' runlevel5.target' : '')],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['halt.target', ''],
['hibernate.target', 'ENABLE_HIBERNATE'],
['hybrid-sleep.target', 'ENABLE_HIBERNATE'],
meson: indentation
2019-04-01 19:57:07 +08:00
['suspend-then-hibernate.target', 'ENABLE_HIBERNATE'],
allow removal of initrd services
2020-04-09 05:59:13 +08:00
['initrd-cleanup.service', 'ENABLE_INITRD'],
['initrd-fs.target', 'ENABLE_INITRD'],
['initrd-parse-etc.service', 'ENABLE_INITRD'],
['initrd-root-device.target', 'ENABLE_INITRD'],
['initrd-root-fs.target', 'ENABLE_INITRD'],
['initrd-switch-root.service', 'ENABLE_INITRD'],
['initrd-switch-root.target', 'ENABLE_INITRD'],
['initrd-udevadm-cleanup-db.service', 'ENABLE_INITRD'],
fstab-generator: if usr= is specified, mount it to /sysusr/usr/ first This changes the fstab-generator to handle mounting of /usr/ a bit differently than before. Instead of immediately mounting the fs to /sysroot/usr/ we'll first mount it to /sysusr/usr/ and then add a separate bind mount that mounts it from /sysusr/usr/ to /sysroot/usr/. This way we can access /usr independently of the root fs, without for waiting to be mounted via the /sysusr/ hierarchy. This is useful for invoking systemd-repart while a root fs doesn't exist yet and for creating it, with partition data read from the /usr/ hierarchy. This introduces a new generic target initrd-usr-fs.target that may be used to generically order services against /sysusr/ to become available.
2021-03-27 05:40:40 +08:00
['initrd-usr-fs.target', 'ENABLE_INITRD'],
allow removal of initrd services
2020-04-09 05:59:13 +08:00
['initrd.target', 'ENABLE_INITRD'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['kexec.target', ''],
['ldconfig.service', 'ENABLE_LDCONFIG',
'sysinit.target.wants/'],
['local-fs-pre.target', ''],
['local-fs.target', ''],
['machine.slice', 'ENABLE_MACHINED'],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['machines.target', 'ENABLE_MACHINED'],
units: Split modprobing out into a separate service unit Devices referred to by `DeviceAllow=` sandboxing are resolved into their corresponding major numbers when the unit is loaded by looking at `/proc/devices`. If a reference is made to a device which is not yet available, the `DeviceAllow` is ignored and the unit's processes cannot access that device. In both logind and nspawn, we have `DeviceAllow=` lines, and `modprobe` in `ExecStartPre=` to load some kernel modules. Those kernel modules cause device nodes to become available when they are loaded: the device nodes may not exist when the unit itself is loaded. This means that the unit's processes will not be able to access the device since the `DeviceAllow=` will have been resolved earlier and denied it. One way to fix this would be to re-evaluate the available devices and re-apply the policy to the cgroup, but this cannot work atomically on cgroupsv1. So we fall back to a second approach: instead of running `modprobe` via `ExecStartPre`, we move this out to a separate unit and order it before the units which want the module. Closes #14322. Fixes: #13943.
2020-01-07 22:33:29 +08:00
['modprobe@.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['multi-user.target', '',
dont install systemd-initctl, runlevel, telinit if no SYSV compat systemd-initctl executable is still built.
2020-04-29 05:11:55 +08:00
(with_runlevels ? 'runlevel2.target runlevel3.target runlevel4.target' : '')],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['network-online.target', ''],
['network-pre.target', ''],
['network.target', ''],
['nss-lookup.target', ''],
['nss-user-lookup.target', ''],
['paths.target', ''],
['poweroff.target', '',
dont install systemd-initctl, runlevel, telinit if no SYSV compat systemd-initctl executable is still built.
2020-04-29 05:11:55 +08:00
(with_runlevels ? 'runlevel0.target' : '')],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['printer.target', ''],
['proc-sys-fs-binfmt_misc.automount', 'ENABLE_BINFMT',
'sysinit.target.wants/'],
['proc-sys-fs-binfmt_misc.mount', 'ENABLE_BINFMT'],
['reboot.target', '',
meson: simplify with_runlevels ternany op usage
2020-10-27 17:49:11 +08:00
'ctrl-alt-del.target' + (with_runlevels ? ' runlevel6.target' : '')],
units: unconditionally pull in remote-cryptsetup.target in the initramfs [zjs: Replaces #17149. I took half of the patch in https://github.com/systemd/systemd/pull/17149#issuecomment-698399194, hence I'm keeping Jonathan's authorship. The original reasoning for 6c5496c492a8d74e54d22bf8824160cab1e63c10 was that we enable remote-cryptsetup.target via presets, and since presets are not used for the initrd, we need a different target. But since parts of the unit and target tree are shared between the initramfs and the main system, we can't just create a separate target for the initramfs. All the targets that depend on this one would need to be split also. That condition is true for initrd-fs.target, but not for sysinit.target. So let's instead just uncoditionally pull in remote-cryptsetup.target in the initramfs. It should normally be empty, so there should be no impact on boots that don't have units in the target. Jonathan's patch used initrd-root-fs.target, this version instead uses initrd-root-device.target. initrd-root-device.target is ordered before sysroot.mount, which means that the decrypted devices will be available earlier too.]
2020-10-27 20:29:38 +08:00
['remote-cryptsetup.target', 'HAVE_LIBCRYPTSETUP',
'initrd-root-device.target.wants/'],
veritysetup-generator: add support for veritytab This adds the support for veritytab. The veritytab file contains at most five fields, the first four are mandatory, the last one is optional: - The first field contains the name of the resulting verity volume; its block device is set up /dev/mapper/</filename>. - The second field contains a path to the underlying block data device, or a specification of a block device via UUID= followed by the UUID. - The third field contains a path to the underlying block hash device, or a specification of a block device via UUID= followed by the UUID. - The fourth field is the roothash in hexadecimal. - The fifth field, if present, is a comma-delimited list of options. The following options are recognized only: ignore-corruption, restart-on-corruption, panic-on-corruption, ignore-zero-blocks, check-at-most-once and root-hash-signature. The others options will be implemented later. Also, this adds support for the new kernel verity command line boolean option "veritytab" which enables the read for veritytab, and the new environment variable SYSTEMD_VERITYTAB which sets the path to the file veritytab to read.
2020-11-14 22:21:39 +08:00
['remote-veritysetup.target', 'HAVE_LIBCRYPTSETUP',
'initrd-root-device.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['remote-fs-pre.target', ''],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['remote-fs.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['rescue.target', '',
dont install systemd-initctl, runlevel, telinit if no SYSV compat systemd-initctl executable is still built.
2020-04-29 05:11:55 +08:00
(with_runlevels ? 'runlevel1.target' : '')],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['rpcbind.target', ''],
['shutdown.target', ''],
['sigpwr.target', ''],
['sleep.target', ''],
['slices.target', ''],
['smartcard.target', ''],
['sockets.target', ''],
['sound.target', ''],
['suspend.target', ''],
['swap.target', ''],
['sys-fs-fuse-connections.mount', '',
'sysinit.target.wants/'],
['sys-kernel-config.mount', '',
'sysinit.target.wants/'],
['sys-kernel-debug.mount', '',
'sysinit.target.wants/'],
units: add mount for tracefs Kernel 4.1 separated the tracing system from the debugfs, actual documentation already points to a different path that needs this new mount to exist. the old sysfs path will still be an automount in the debugfs, created by the kernel (for now). Signed-off-by: Norbert Lange <nolange79@gmail.com>
2020-02-21 22:08:13 +08:00
['sys-kernel-tracing.mount', '',
'sysinit.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['sysinit.target', ''],
['syslog.socket', ''],
crypsetup: introduce x-initrd.attach option This option is an indication for PID1 that the entry in crypttab is handled by initrd only and therefore it shouldn't interfer during the usual start-up and shutdown process. It should be primarily used with the encrypted device containing the root FS as we want to keep it (and thus its encrypted device) until the very end of the shutdown process, i.e. when initrd takes over. This option is the counterpart of "x-initrd.mount" used in fstab. Note that the slice containing the cryptsetup services also needs to drop the usual shutdown dependencies as it's required by the cryptsetup services. Fixes: #14224
2019-12-03 16:30:57 +08:00
['system-systemd\\x2dcryptsetup.slice', 'HAVE_LIBCRYPTSETUP'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['system-update.target', ''],
units: Add new system-update-pre.target systemd offline-updates allows dropping multiple system update units to be added to system-update.target.wants. As documented in systemd.offline-updates(7) only 1 of these units should actually be active (based on the /system-update symlink) and when that unit is done it should reboot the system. In some cases it is desirable to run a unit whenever booting in offline-updates mode indepedent of which update unit is going to handle the update. One example of this is integration with bootloader code which checks if the previous boot was succesful. Since the active unit will reboot the system when it is done, there is no guarantee that adding such a unit to system-update.target.wants will get it executed always. This commit adds a system-update-pre.target which can be used for units which should always run when booting in offline-updates mode.
2018-06-19 16:50:41 +08:00
['system-update-pre.target', ''],
unit,meson: drop .in suffix if no substitution is required (#8740)
2018-04-18 01:49:10 +08:00
['system-update-cleanup.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-ask-password-console.path', '',
'sysinit.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-ask-password-console.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-ask-password-wall.path', '',
'multi-user.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-ask-password-wall.service', ''],
['systemd-boot-system-token.service', 'ENABLE_EFI',
'sysinit.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-coredump.socket', 'ENABLE_COREDUMP',
'sockets.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-exit.service', ''],
['systemd-firstboot.service', 'ENABLE_FIRSTBOOT',
'sysinit.target.wants/'],
['systemd-halt.service', ''],
homed: explicitly deactivate all home directories on shutdown Let's explicitly deactivate all home dirs on shutdown, in order to properly synchronizing unmounting and avoiding blocking devices. Previously, we'd rely on automatic deactivation when home directories become unused. However, that scheme is asynchronous, and ongoing deactviations might conflicts with attempts to unmount /home. Let's fix that by providing an explicit service systemd-homed-activate.service whose only job is to have a ExecStop= line that explicitly deactivates all home directories on shutdown. This service can the be ordered after home.mount and similar, ensuring that we'll first deactivate all homes before deactivating /home itself during shutdown. This is kept separate from systemd-homed.service so that it is possible to restart systemd-homed.service without deactivating all home directories. Fixes: #16842
2020-09-22 00:25:46 +08:00
['systemd-homed-activate.service', 'ENABLE_HOMED'],
dont install systemd-initctl, runlevel, telinit if no SYSV compat systemd-initctl executable is still built.
2020-04-29 05:11:55 +08:00
['systemd-initctl.socket', 'HAVE_SYSV_COMPAT',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
'sockets.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-journal-catalog-update.service', '',
'sysinit.target.wants/'],
['systemd-journal-flush.service', '',
'sysinit.target.wants/'],
meson: do not install files from disabled features (#5811) Mirror conditions from Makefile.am.
2017-04-28 01:47:04 +08:00
['systemd-journal-gatewayd.socket', 'ENABLE_REMOTE HAVE_MICROHTTPD'],
['systemd-journal-remote.socket', 'ENABLE_REMOTE HAVE_MICROHTTPD'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-journald-audit.socket', '',
'sockets.target.wants/'],
['systemd-journald-dev-log.socket', '',
'sockets.target.wants/'],
['systemd-journald.socket', '',
'sockets.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-kexec.service', ''],
['systemd-machine-id-commit.service', '',
'sysinit.target.wants/'],
units: add unit files for instantiated journal daemons
2019-11-25 22:37:35 +08:00
['systemd-journald@.socket', ''],
journald: add ability to activate by varlink socket If we have exit on idle, then operations such as "journalctl --namespace=foo --rotate" should work even if the journal daemon is currently not running. (Note that we don't do activation by varlink for the main instance of journald, I am not sure the deadlocks it might introduce are worth it)
2019-11-27 21:47:37 +08:00
['systemd-journald-varlink@.socket', ''],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['systemd-networkd.socket', 'ENABLE_NETWORKD'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-poweroff.service', ''],
['systemd-reboot.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-rfkill.socket', 'ENABLE_RFKILL'],
sysext: install in rootbindir, remove template from unit This reverts commit 71ad75f30641b90f9ca0088869f164d9d085430f.
2021-01-20 01:23:57 +08:00
['systemd-sysext.service', 'ENABLE_SYSEXT'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-sysusers.service', 'ENABLE_SYSUSERS',
'sysinit.target.wants/'],
['systemd-tmpfiles-clean.service', 'ENABLE_TMPFILES'],
systemd-tmpfiles: don't install timer when service isn't installed either Fixes: systemd-tmpfiles-clean.timer: Refusing to start, unit systemd-tmpfiles-clean.service to trigger not loaded.
2019-11-22 16:20:20 +08:00
['systemd-tmpfiles-clean.timer', 'ENABLE_TMPFILES',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
'timers.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-tmpfiles-setup-dev.service', 'ENABLE_TMPFILES',
'sysinit.target.wants/'],
['systemd-tmpfiles-setup.service', 'ENABLE_TMPFILES',
'sysinit.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-udevd-control.socket', '',
'sockets.target.wants/'],
units: drop full paths for utilities in $PATH This makes things a bit simpler and the build a bit faster, because we don't have to rewrite files to do the trivial substitution. @rootbindir@ is always in our internal $PATH that we use for non-absolute paths, so there should be no functional change.
2019-12-18 16:14:57 +08:00
['systemd-udev-settle.service', ''],
['systemd-udev-trigger.service', '',
'sysinit.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-udevd-kernel.socket', '',
'sockets.target.wants/'],
units: make systemd-userdbd.{socket,service} installable It's lightweight and generally useful, so it should be enabled by default. But users might want to disable it for whatever reason, and things should be fine without it, so let's make it installable so it can be disabled if wanted. Fixes #15175.
2020-03-14 01:40:54 +08:00
['systemd-userdbd.socket', 'ENABLE_USERDB'],
units: add time-set.target time-sync.target is supposed to indicate system clock is synchronized with a remote clock, but as used through 241 it only provided a system clock that was updated based on a locally-maintained timestamp. Systems that are powered off for extended periods would not come up with accurate time. Retain the existing behavior using a new time-set.target leaving time-sync.target for cases where accuracy is required. Closes #8861
2018-04-30 20:05:29 +08:00
['time-set.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['time-sync.target', ''],
['timers.target', ''],
units: do not perform m4 if not necessary (#6575)
2017-08-09 21:13:41 +08:00
['tmp.mount', '',
'local-fs.target.wants/'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['umount.target', ''],
units: add missing usb-gadget.target
2020-08-28 21:36:35 +08:00
['usb-gadget.target', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['user.slice', ''],
nspawn: hook var-lib-machines.mount to machines.target and remote-fs.target /var can be on a remote filesystem, thus hooking it to local-fs.target is not correct. Also, only install the mount unit when machined is enabled, because machined is the one managing the underlying device, and thus makes no sense without machined. Fixes #1175
2017-06-22 04:04:38 +08:00
['var-lib-machines.mount', 'ENABLE_MACHINED',
'remote-fs.target.wants/ machines.target.wants/'],
meson: rework processing of unit files Ideally, we would chain the m4 processing, .in substitutions, and file installation so that the commands don't have to be repeated. Unfortunately this does not seem currently possible, because custom_target() output cannot be fed into install_data(), so it's necessary to use the 'install', 'install_dir' arguments to control installation. Nevertheless, rework the rules to repeat less stuff and unify handling of conditions between the different file types.
2017-04-13 08:58:55 +08:00
]
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
in_units = [
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
['console-getty.service', ''],
['container-getty@.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['debug-shell.service', ''],
['emergency.service', ''],
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
['getty@.service', '',
'autovt@.service'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['kmod-static-nodes.service', 'HAVE_KMOD ENABLE_TMPFILES',
'sysinit.target.wants/'],
['quotaon.service', 'ENABLE_QUOTACHECK'],
['rc-local.service', 'HAVE_SYSV_COMPAT'],
['rescue.service', ''],
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
['serial-getty@.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-backlight@.service', 'ENABLE_BACKLIGHT'],
['systemd-binfmt.service', 'ENABLE_BINFMT',
'sysinit.target.wants/'],
add new systemd-bless-boot.service that marks boots as successful This is the counterpiece to the boot counting implemented in systemd-boot: if a boot is detected as successful we mark drop the counter again from the booted snippet or kernel image.
2018-06-25 23:24:09 +08:00
['systemd-bless-boot.service', 'ENABLE_EFI HAVE_BLKID'],
units: add simple boot check unit This is might be useful in some cases, but it's primarily an example for a boot check service that can be plugged before boot-complete.target. It's disabled by default. All it does is check whether the failed unit count is zero
2018-06-25 22:07:33 +08:00
['systemd-boot-check-no-failures.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-coredump@.service', 'ENABLE_COREDUMP'],
pstore: Tool to archive contents of pstore This patch introduces the systemd pstore service which will archive the contents of the Linux persistent storage filesystem, pstore, to other storage, thus preserving the existing information contained in the pstore, and clearing pstore storage for future error events. Linux provides a persistent storage file system, pstore[1], that can store error records when the kernel dies (or reboots or powers-off). These records in turn can be referenced to debug kernel problems (currently the kernel stuffs the tail of the dmesg, which also contains a stack backtrace, into pstore). The pstore file system supports a variety of backends that map onto persistent storage, such as the ACPI ERST[2, Section 18.5 Error Serialization] and UEFI variables[3 Appendix N Common Platform Error Record]. The pstore backends typically offer a relatively small amount of persistent storage, e.g. 64KiB, which can quickly fill up and thus prevent subsequent kernel crashes from recording errors. Thus there is a need to monitor and extract the pstore contents so that future kernel problems can also record information in the pstore. The pstore service is independent of the kdump service. In cloud environments specifically, host and guest filesystems are on remote filesystems (eg. iSCSI or NFS), thus kdump relies [implicitly and/or explicitly] upon proper operation of networking software *and* hardware *and* infrastructure. Thus it may not be possible to capture a kernel coredump to a file since writes over the network may not be possible. The pstore backend, on the other hand, is completely local and provides a path to store error records which will survive a reboot and aid in post-mortem debugging. Usage Notes: This tool moves files from /sys/fs/pstore into /var/lib/systemd/pstore. To enable kernel recording of error records into pstore, one must either pass crash_kexec_post_notifiers[4] to the kernel command line or enable via 'echo Y > /sys/module/kernel/parameters/crash_kexec_post_notifiers'. This option invokes the recording of errors into pstore *before* an attempt to kexec/kdump on a kernel crash. Optionally, to record reboots and shutdowns in the pstore, one can either pass the printk.always_kmsg_dump[4] to the kernel command line or enable via 'echo Y > /sys/module/printk/parameters/always_kmsg_dump'. This option enables code on the shutdown path to record information via pstore. This pstore service is a oneshot service. When run, the service invokes systemd-pstore which is a tool that performs the following: - reads the pstore.conf configuration file - collects the lists of files in the pstore (eg. /sys/fs/pstore) - for certain file types (eg. dmesg) a handler is invoked - for all other files, the file is moved from pstore - In the case of dmesg handler, final processing occurs as such: - files processed in reverse lexigraphical order to faciliate reconstruction of original dmesg - the filename is examined to determine which dmesg it is a part - the file is appended to the reconstructed dmesg For example, the following pstore contents: root@vm356:~# ls -al /sys/fs/pstore total 0 drwxr-x--- 2 root root 0 May 9 09:50 . drwxr-xr-x 7 root root 0 May 9 09:50 .. -r--r--r-- 1 root root 1610 May 9 09:49 dmesg-efi-155741337601001 -r--r--r-- 1 root root 1778 May 9 09:49 dmesg-efi-155741337602001 -r--r--r-- 1 root root 1726 May 9 09:49 dmesg-efi-155741337603001 -r--r--r-- 1 root root 1746 May 9 09:49 dmesg-efi-155741337604001 -r--r--r-- 1 root root 1686 May 9 09:49 dmesg-efi-155741337605001 -r--r--r-- 1 root root 1690 May 9 09:49 dmesg-efi-155741337606001 -r--r--r-- 1 root root 1775 May 9 09:49 dmesg-efi-155741337607001 -r--r--r-- 1 root root 1811 May 9 09:49 dmesg-efi-155741337608001 -r--r--r-- 1 root root 1817 May 9 09:49 dmesg-efi-155741337609001 -r--r--r-- 1 root root 1795 May 9 09:49 dmesg-efi-155741337710001 -r--r--r-- 1 root root 1770 May 9 09:49 dmesg-efi-155741337711001 -r--r--r-- 1 root root 1796 May 9 09:49 dmesg-efi-155741337712001 -r--r--r-- 1 root root 1787 May 9 09:49 dmesg-efi-155741337713001 -r--r--r-- 1 root root 1808 May 9 09:49 dmesg-efi-155741337714001 -r--r--r-- 1 root root 1754 May 9 09:49 dmesg-efi-155741337715001 results in the following: root@vm356:~# ls -al /var/lib/systemd/pstore/155741337/ total 92 drwxr-xr-x 2 root root 4096 May 9 09:50 . drwxr-xr-x 4 root root 40 May 9 09:50 .. -rw-r--r-- 1 root root 1610 May 9 09:50 dmesg-efi-155741337601001 -rw-r--r-- 1 root root 1778 May 9 09:50 dmesg-efi-155741337602001 -rw-r--r-- 1 root root 1726 May 9 09:50 dmesg-efi-155741337603001 -rw-r--r-- 1 root root 1746 May 9 09:50 dmesg-efi-155741337604001 -rw-r--r-- 1 root root 1686 May 9 09:50 dmesg-efi-155741337605001 -rw-r--r-- 1 root root 1690 May 9 09:50 dmesg-efi-155741337606001 -rw-r--r-- 1 root root 1775 May 9 09:50 dmesg-efi-155741337607001 -rw-r--r-- 1 root root 1811 May 9 09:50 dmesg-efi-155741337608001 -rw-r--r-- 1 root root 1817 May 9 09:50 dmesg-efi-155741337609001 -rw-r--r-- 1 root root 1795 May 9 09:50 dmesg-efi-155741337710001 -rw-r--r-- 1 root root 1770 May 9 09:50 dmesg-efi-155741337711001 -rw-r--r-- 1 root root 1796 May 9 09:50 dmesg-efi-155741337712001 -rw-r--r-- 1 root root 1787 May 9 09:50 dmesg-efi-155741337713001 -rw-r--r-- 1 root root 1808 May 9 09:50 dmesg-efi-155741337714001 -rw-r--r-- 1 root root 1754 May 9 09:50 dmesg-efi-155741337715001 -rw-r--r-- 1 root root 26754 May 9 09:50 dmesg.txt where dmesg.txt is reconstructed from the group of related dmesg-efi-155741337* files. Configuration file: The pstore.conf configuration file has four settings, described below. - Storage : one of "none", "external", or "journal". With "none", this tool leaves the contents of pstore untouched. With "external", the contents of the pstore are moved into the /var/lib/systemd/pstore, as well as logged into the journal. With "journal", the contents of the pstore are recorded only in the systemd journal. The default is "external". - Unlink : is a boolean. When "true", the default, then files in the pstore are removed once processed. When "false", processing of the pstore occurs normally, but the pstore files remain. References: [1] "Persistent storage for a kernel's dying breath", March 23, 2011. https://lwn.net/Articles/434821/ [2] "Advanced Configuration and Power Interface Specification", version 6.2, May 2017. https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf [3] "Unified Extensible Firmware Interface Specification", version 2.8, March 2019. https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf [4] "The kernel’s command-line parameters", https://static.lwn.net/kerneldoc/admin-guide/kernel-parameters.html
2019-05-16 21:59:01 +08:00
['systemd-pstore.service', 'ENABLE_PSTORE'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-fsck-root.service', ''],
['systemd-fsck@.service', ''],
['systemd-hibernate-resume@.service', 'ENABLE_HIBERNATE'],
['systemd-hibernate.service', 'ENABLE_HIBERNATE'],
['systemd-hybrid-sleep.service', 'ENABLE_HIBERNATE'],
Rename suspend-to-hibernate to suspend-then-hibernate Per some discussion with Gnome folks, they would prefer this name as it's more descriptive of what's happening.
2018-03-29 00:00:06 +08:00
['systemd-suspend-then-hibernate.service', 'ENABLE_HIBERNATE'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-hostnamed.service', 'ENABLE_HOSTNAMED',
'dbus-org.freedesktop.hostname1.service'],
['systemd-hwdb-update.service', 'ENABLE_HWDB',
'sysinit.target.wants/'],
['systemd-importd.service', 'ENABLE_IMPORTD',
'dbus-org.freedesktop.import1.service'],
build: skip installation of 2 files if feature is disabled dont install systemd-update-utmp if utmp is disabled. dont install systemd-initctl.service if sysv is disabled.
2020-07-14 06:49:25 +08:00
['systemd-initctl.service', 'HAVE_SYSV_COMPAT'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-journal-gatewayd.service', 'ENABLE_REMOTE HAVE_MICROHTTPD'],
['systemd-journal-remote.service', 'ENABLE_REMOTE HAVE_MICROHTTPD'],
['systemd-journal-upload.service', 'ENABLE_REMOTE HAVE_LIBCURL'],
['systemd-journald.service', '',
'sysinit.target.wants/'],
units: add unit files for instantiated journal daemons
2019-11-25 22:37:35 +08:00
['systemd-journald@.service', ''],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-localed.service', 'ENABLE_LOCALED',
'dbus-org.freedesktop.locale1.service'],
['systemd-logind.service', 'ENABLE_LOGIND',
'multi-user.target.wants/ dbus-org.freedesktop.login1.service'],
['systemd-machined.service', 'ENABLE_MACHINED',
'dbus-org.freedesktop.machine1.service'],
['systemd-modules-load.service', 'HAVE_KMOD',
'sysinit.target.wants/'],
unit: rename initrd-network-generator.service -> systemd-network-generator.service
2019-07-29 23:58:00 +08:00
['systemd-network-generator.service', 'ENABLE_NETWORKD'],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['systemd-networkd.service', 'ENABLE_NETWORKD'],
['systemd-networkd-wait-online.service', 'ENABLE_NETWORKD'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-nspawn@.service', ''],
units: install dbus-org.freedesktop.oom1.service alias Fixes: #18469
2021-04-10 15:50:50 +08:00
['systemd-oomd.service', 'ENABLE_OOMD',
'dbus-org.freedesktop.oom1.service'],
add new portable service framework This adds a small service "systemd-portabled" and a matching client "portablectl", which implement the "portable service" concept. The daemon implements the actual operations, is PolicyKit-enabled and is activated on demand with exit-on-idle. Both the daemon and the client are an optional build artifact, enabled by default rhough.
2018-04-17 03:41:40 +08:00
['systemd-portabled.service', 'ENABLE_PORTABLED',
'dbus-org.freedesktop.portable1.service'],
userdbd: add new service that can merge userdb queries from multiple clients
2019-07-05 00:33:30 +08:00
['systemd-userdbd.service', 'ENABLE_USERDB'],
units: make systemd-homed.service installable Fixes #15083. Users might want to disable homed if not used to save resources.
2020-03-14 01:38:09 +08:00
['systemd-homed.service', 'ENABLE_HOMED'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-quotacheck.service', 'ENABLE_QUOTACHECK'],
['systemd-random-seed.service', 'ENABLE_RANDOMSEED',
'sysinit.target.wants/'],
Pull in systemd-remount-fs.service only when required Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab, and possibly masking this condition if it should be enabled for auto gpt stuff, just pull it in explicitly when required.
2018-12-20 22:52:52 +08:00
['systemd-remount-fs.service', ''],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['systemd-resolved.service', 'ENABLE_RESOLVE'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-rfkill.service', 'ENABLE_RFKILL'],
['systemd-suspend.service', ''],
['systemd-sysctl.service', '',
'sysinit.target.wants/'],
['systemd-timedated.service', 'ENABLE_TIMEDATED',
'dbus-org.freedesktop.timedate1.service'],
meson: stop creating enablement symlinks in /etc during installation This patch was initially prompted by a report on a Fedora update [1], that the upgrade causes systemd-resolved.service and systemd-networkd.service to be re-enabled. We generally want to preserve the enablement of all services during upgrades, so a reset like this is not expected. Both services declare two symlinks in their [Install] sections, for their dbus names and for multi-user.target.wants/. It turns out that both services were only partially enabled, because their dbus unit symlinks /etc/systemd/system/dbus-org.freedesktop.{resolve1,network1}.service were created, by the symlinks in /etc/systemd/system/multi-user.target.wants/ were not. This means that the units could be activated by dbus, but not in usual fashion using systemctl start. Our tools make it rather hard to figure out when something like this happens, and it is definitely an area for improvement on its own. The symlink in .wants/ was filtered out by during packaging, but the dbus symlink was left in (I assume by mistake). Let's simplify things by not creating the symlinks statically during 'ninja install'. This means that the units shipped by systemd have to be enabled in the usual fashion, which in turns means that [Install] section and presets become the "single source of truth" and we don't have two sets of conflicting configuration. Let's consider a few cases: - developer: a developer installs systemd from git on a running system, and they don't want the installation to reset enablement of anything. So this change is either positive for them, or has no effect (if they have everything at defaults). - package creation: we want to create symlinks using 'preset-all' and 'preset' on upgraded packages, we don't want to have any static symlinks. This change will remove the need to filter out symlinks in packaging and of course fix the original report. - installation of systemd from scratch: this change means that without 'preset-all' the system will not be functional. This case could be affected negatively by this change, but I think it's enough of a corner case to accept this. In practice I expect people to build a package, not installl directly into the file system, so this might not even matter in practice. Creating those symlinks was probably the right thing in the beginning, but nowadays the preset system is very well established and people expect it to be honoured. Ignoring the presets and doing static configuration is not welcome anymore. Note: during package installation, either 'preset-all' or 'preset getty@.service machines.target remote-cryptsetup.target remote-fs.target systemd-networkd.service systemd-resolved.service systemd-networkd-wait-online.service systemd-timesyncd.service' should be called. [1] https://bodhi.fedoraproject.org/updates/FEDORA-2019-616045ca76
2019-04-01 19:57:24 +08:00
['systemd-timesyncd.service', 'ENABLE_TIMESYNCD'],
units: leave systemd-time-wait-sync disabled by default Also mark its presence conditional on ENABLE_TIMESYNCD.
2018-04-11 00:05:25 +08:00
['systemd-time-wait-sync.service', 'ENABLE_TIMESYNCD'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
['systemd-udevd.service', '',
'sysinit.target.wants/'],
['systemd-update-done.service', '',
'sysinit.target.wants/'],
build-sys: s/HAVE_UTMP/ENABLE_UTMP/ "Have" should be about the external environment and dependencies. Anything which is a pure yes/no choice should be "enable".
2017-10-03 18:19:30 +08:00
['systemd-update-utmp-runlevel.service', 'ENABLE_UTMP HAVE_SYSV_COMPAT',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
'multi-user.target.wants/ graphical.target.wants/ rescue.target.wants/'],
build-sys: s/HAVE_UTMP/ENABLE_UTMP/ "Have" should be about the external environment and dependencies. Anything which is a pure yes/no choice should be "enable".
2017-10-03 18:19:30 +08:00
['systemd-update-utmp.service', 'ENABLE_UTMP',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
'sysinit.target.wants/'],
meson: do not create systemd-user-sessions.service if PAM is disabled Fixes #7227.
2017-10-31 15:20:53 +08:00
['systemd-user-sessions.service', 'HAVE_PAM',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
'multi-user.target.wants/'],
['systemd-vconsole-setup.service', 'ENABLE_VCONSOLE'],
allow removal of initrd services
2020-04-09 05:59:13 +08:00
['systemd-volatile-root.service', 'ENABLE_INITRD'],
Revert "units: make systemd-repart.service installable" This reverts commit 7e1ed1f3b29162df25064b33dc55ac8cf432bb0b. systemd-repart is not a user service that should be something people enable/disable, instead it should just work if there's configuration for it. It's like systemd-tmpfiles, systemd-sysusers, systemd-load-modules, systemd-binfmt, systemd-systemd-sysctl which are NOPs if they have no configuration, and thus don't hurt, but cannot be disabled since they are too deep part of the OS. This doesn't mean people couldn't disable the service if they really want to, there's after all "systemctl mask" and build-time disabling, but those are OS developer facing instead of admin facing, that's how it should be. Note that systemd-repart is in particular an initrd service, and so far enable/disable state of those is not managed anyway via "systemctl enable/disable" but more what dracut decides to package up and what not.
2020-04-02 23:01:34 +08:00
['systemd-repart.service', 'ENABLE_REPART',
'sysinit.target.wants/ initrd-root-fs.target.wants/'],
logind: split %t directory creation to a helper unit Unfortunately this needs a new binary to do the mount because there's just too many special steps to outsource this to systemd-mount: - EPERM needs to be treated specially - UserRuntimeDir= setting must be obeyed - SELinux label must be adjusted This allows user@.service to be started independently of logind. So 'systemctl start user@nnn' will start the user manager for user nnn. Logind will start it too when the user logs in, and will stop it (unless lingering is enabled) when the user logs out. Fixes #7339.
2017-12-10 02:30:17 +08:00
['user-runtime-dir@.service', ''],
units: do not perform m4 if not necessary (#6575)
2017-08-09 21:13:41 +08:00
['user@.service', ''],
meson: rework processing of unit files Ideally, we would chain the m4 processing, .in substitutions, and file installation so that the commands don't have to be repeated. Unfortunately this does not seem currently possible, because custom_target() output cannot be fed into install_data(), so it's necessary to use the 'install', 'install_dir' arguments to control installation. Nevertheless, rework the rules to repeat less stuff and unify handling of conditions between the different file types.
2017-04-13 08:58:55 +08:00
]
meson: Optimize add-wants targets Instead of invoking meson-add-wants.sh once for each wants that has to be added, we pass all wants to a single invocation of meson-add-wants.sh and in meson-add-wants.sh, loop over the arguments. This saves about 300ms on the install step. Before: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.465s user 0m1.025s sys 0m0.426s ``` After: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.162s user 0m0.803s sys 0m0.338s ```
2021-01-10 03:48:39 +08:00
add_wants = []
meson: add unit installation symlinks This is the equivalent of $(SYSTEM_UNIT_ALIASES) and $(GENERAL_ALIASES) in Makefile.am. ninja-build uninstall does not remove the symlinks, see https://github.com/mesonbuild/meson/issues/1602. I don't consider this a blocker: after all either one installs into $DESTDIR, where uninstallation doesn't make much sense, or into a real system, where a successfull uninstallation would likely destroy the system. v2: - remove bashisms - add various forgotten symlinks and fix service/timer/target confusions
2017-04-10 11:43:53 +08:00
foreach tuple : in_units
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
file = tuple[0]
meson: rework processing of unit files Ideally, we would chain the m4 processing, .in substitutions, and file installation so that the commands don't have to be repeated. Unfortunately this does not seem currently possible, because custom_target() output cannot be fed into install_data(), so it's necessary to use the 'install', 'install_dir' arguments to control installation. Nevertheless, rework the rules to repeat less stuff and unify handling of conditions between the different file types.
2017-04-13 08:58:55 +08:00
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
# we do this here because install_data does not accept custom_target output
conds = tuple[1].split(' ')
build-sys: use #if Y instead of #ifdef Y everywhere The advantage is that is the name is mispellt, cpp will warn us. $ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/" $ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;' $ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g' $ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g' + manual changes to meson.build squash! build-sys: use #if Y instead of #ifdef Y everywhere v2: - fix incorrect setting of HAVE_LIBIDN2
2017-10-03 16:41:51 +08:00
install = ((conds.get(0, '') == '' or conf.get(conds[0]) == 1) and
(conds.get(1, '') == '' or conf.get(conds[1]) == 1))
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
custom_target(
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
file,
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
input : file + '.in',
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
output : file,
meson: use jinja2 for unit templates We don't need two (and half) templating systems anymore, yay! I'm keeping the changes minimal, to make the diff manageable. Some enhancements due to a better templating system might be possible in the future. For handling of '## ' — see the next commit.
2021-05-16 17:55:36 +08:00
command : [meson_render_jinja2, config_h, '@INPUT@'],
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
capture : true,
install : install,
install_dir : systemunitdir)
meson: add unit installation symlinks This is the equivalent of $(SYSTEM_UNIT_ALIASES) and $(GENERAL_ALIASES) in Makefile.am. ninja-build uninstall does not remove the symlinks, see https://github.com/mesonbuild/meson/issues/1602. I don't consider this a blocker: after all either one installs into $DESTDIR, where uninstallation doesn't make much sense, or into a real system, where a successfull uninstallation would likely destroy the system. v2: - remove bashisms - add various forgotten symlinks and fix service/timer/target confusions
2017-04-10 11:43:53 +08:00
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
if install and tuple.length() > 2
foreach target : tuple[2].split()
meson: Optimize add-wants targets Instead of invoking meson-add-wants.sh once for each wants that has to be added, we pass all wants to a single invocation of meson-add-wants.sh and in meson-add-wants.sh, loop over the arguments. This saves about 300ms on the install step. Before: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.465s user 0m1.025s sys 0m0.426s ``` After: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.162s user 0m0.803s sys 0m0.338s ```
2021-01-10 03:48:39 +08:00
add_wants += [systemunitdir, target, file]
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
endforeach
endif
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
endforeach
meson: rework processing of unit files Ideally, we would chain the m4 processing, .in substitutions, and file installation so that the commands don't have to be repeated. Unfortunately this does not seem currently possible, because custom_target() output cannot be fed into install_data(), so it's necessary to use the 'install', 'install_dir' arguments to control installation. Nevertheless, rework the rules to repeat less stuff and unify handling of conditions between the different file types.
2017-04-13 08:58:55 +08:00
foreach tuple : units
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
file = tuple[0]
input = tuple.get(3, file)
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
conds = tuple[1].split(' ')
build-sys: use #if Y instead of #ifdef Y everywhere The advantage is that is the name is mispellt, cpp will warn us. $ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/" $ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;' $ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g' $ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g' + manual changes to meson.build squash! build-sys: use #if Y instead of #ifdef Y everywhere v2: - fix incorrect setting of HAVE_LIBIDN2
2017-10-03 16:41:51 +08:00
install = ((conds.get(0, '') == '' or conf.get(conds[0]) == 1) and
(conds.get(1, '') == '' or conf.get(conds[1]) == 1))
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
if install
install_data(input,
install_dir : systemunitdir)
meson: add unit installation symlinks This is the equivalent of $(SYSTEM_UNIT_ALIASES) and $(GENERAL_ALIASES) in Makefile.am. ninja-build uninstall does not remove the symlinks, see https://github.com/mesonbuild/meson/issues/1602. I don't consider this a blocker: after all either one installs into $DESTDIR, where uninstallation doesn't make much sense, or into a real system, where a successfull uninstallation would likely destroy the system. v2: - remove bashisms - add various forgotten symlinks and fix service/timer/target confusions
2017-04-10 11:43:53 +08:00
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
if tuple.length() > 2
foreach target : tuple[2].split()
meson: Optimize add-wants targets Instead of invoking meson-add-wants.sh once for each wants that has to be added, we pass all wants to a single invocation of meson-add-wants.sh and in meson-add-wants.sh, loop over the arguments. This saves about 300ms on the install step. Before: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.465s user 0m1.025s sys 0m0.426s ``` After: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.162s user 0m0.803s sys 0m0.338s ```
2021-01-10 03:48:39 +08:00
add_wants += [systemunitdir, target, file]
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
endforeach
endif
endif
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
endforeach
meson: Optimize add-wants targets Instead of invoking meson-add-wants.sh once for each wants that has to be added, we pass all wants to a single invocation of meson-add-wants.sh and in meson-add-wants.sh, loop over the arguments. This saves about 300ms on the install step. Before: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.465s user 0m1.025s sys 0m0.426s ``` After: ``` ‣ Running build script... [1/418] Generating version.h with a custom command Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo real 0m1.162s user 0m0.803s sys 0m0.338s ```
2021-01-10 03:48:39 +08:00
meson.add_install_script('meson-add-wants.sh', add_wants)
Use a dash-truncated drop-in for user-%j.slice configuration This removes the UserTasksMax= setting in logind.conf. Instead, the generic TasksMax= setting on the slice should be used. Instead of a transient unit we use a drop-in to tweak the default definition of a .slice. It's better to use the normal unit mechanisms instead of creating units on the fly. This will also make it easier to start user@.service independently of logind, or set additional settings like MemoryMax= for user slices. The setting in logind is removed, because otherwise we would have two sources of "truth": the slice on disk and the logind config. Instead of trying to coordinate those two sources of configuration (and maintainer overrides to both), let's just convert to the new one fully. Right now now automatic transition mechanism is provided. logind will emit a hint when it encounters the setting, but otherwise it will be ignored. Fixes #2556.
2017-12-08 05:25:26 +08:00
install_data('user-.slice.d/10-defaults.conf',
install_dir : systemunitdir + '/user-.slice.d')
meson: rework processing of unit files Ideally, we would chain the m4 processing, .in substitutions, and file installation so that the commands don't have to be repeated. Unfortunately this does not seem currently possible, because custom_target() output cannot be fed into install_data(), so it's necessary to use the 'install', 'install_dir' arguments to control installation. Nevertheless, rework the rules to repeat less stuff and unify handling of conditions between the different file types.
2017-04-13 08:58:55 +08:00
############################################################
meson: add option to skip installing to $sysconfdir This is useful for development where overwriting files out side the configured prefix will affect the host as well as stateless systems such as NixOS that don't let packages install to /etc but handle configuration on their own. Alternative to https://github.com/systemd/systemd/pull/17501 tested with: $ mkdir inst build && cd build $ meson \ -Dcreate-log-dirs=false \ -Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \ -Dsysvinit-path=$(realpath ../inst)/etc/init.d \ -Drootprefix=$(realpath ../inst) \ -Dinstall-sysconfdir=false \ --prefix=$(realpath ../inst) .. $ ninja install
2020-11-12 15:01:39 +08:00
if install_sysconfdir
meson.add_install_script(meson_make_symlink,
meson: use a/b instead of join_paths(a,b) It is nicer and shorter.
2021-07-28 01:32:35 +08:00
pkgsysconfdir / 'user',
sysconfdir / 'xdg/systemd/user')
meson: add option to skip installing to $sysconfdir This is useful for development where overwriting files out side the configured prefix will affect the host as well as stateless systems such as NixOS that don't let packages install to /etc but handle configuration on their own. Alternative to https://github.com/systemd/systemd/pull/17501 tested with: $ mkdir inst build && cd build $ meson \ -Dcreate-log-dirs=false \ -Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \ -Dsysvinit-path=$(realpath ../inst)/etc/init.d \ -Drootprefix=$(realpath ../inst) \ -Dinstall-sysconfdir=false \ --prefix=$(realpath ../inst) .. $ ninja install
2020-11-12 15:01:39 +08:00
endif
Revert "Drop dbus activation stub service" This reverts commit 07125d24eedb71693b3bf2b1f0730cd01aaac2dd. In contrast to what is claimed in #13396 dbus-broker apparently does care for the service file to be around, and otherwise will claim "Service Not Activatable" in the time between systemd starting up the broker and connecting to it, which the stub service file is supposed to make go away. Reverting this makes the integration test suite pass again on host with dbus-broker (i.e. current Fedora desktop). Tested with dbus-broker-21-6.fc31.x86_64.
2019-12-20 19:26:17 +08:00
meson.add_install_script(meson_make_symlink,
meson: use a/b instead of join_paths(a,b) It is nicer and shorter.
2021-07-28 01:32:35 +08:00
dbussystemservicedir / 'org.freedesktop.systemd1.service',
dbussessionservicedir / 'org.freedesktop.systemd1.service')
build-sys: use #if Y instead of #ifdef Y everywhere The advantage is that is the name is mispellt, cpp will warn us. $ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/" $ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;' $ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g' $ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g' + manual changes to meson.build squash! build-sys: use #if Y instead of #ifdef Y everywhere v2: - fix incorrect setting of HAVE_LIBIDN2
2017-10-03 16:41:51 +08:00
if conf.get('HAVE_SYSV_COMPAT') == 1
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
foreach i : [1, 2, 3, 4, 5]
meson.add_install_script(
meson: revert the change to unquote commands in add_install_script Old meson fails with: Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog'] I'm doing it as a revert so that it's easy to undo the revert when we require newer meson. The effect is not so bad, maybe a dozen or so lines about finding 'sh'.
2021-05-14 22:12:51 +08:00
'sh', '-c',
meson: use a/b instead of join_paths(a,b) It is nicer and shorter.
2021-07-28 01:32:35 +08:00
mkdir_p.format(systemunitdir / 'runlevel@0@.target.wants'.format(i)))
meson: reindent all files with 8 spaces The indentation for emacs'es meson-mode is added .dir-locals. All files are reindented automatically, using the lasest meson-mode from git. Indentation should now be fairly consistent.
2017-04-18 07:25:00 +08:00
endforeach
meson: create dirs and touch /usr This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook. I did not bother to create the directories into which we install files, since they will be created anyway. v2: - remove bashism
2017-04-10 11:55:05 +08:00
endif
meson: build systemd using meson It's crucial that we can build systemd using VS2010! ... er, wait, no, that's not the official reason. We need to shed old systems by requring python 3! Oh, no, it's something else. Maybe we need to throw out 345 years of knowlege accumulated in autotools? Whatever, this new thing is cool and shiny, let's use it. This is not complete, I'm throwing it out here for your amusement and critique. - rules for sd-boot are missing. Those might be quite complicated. - rules for tests are missing too. Those are probably quite simple and repetitive, but there's lots of them. - it's likely that I didn't get all the conditions right, I only tested "full" compilation where most deps are provided and nothing is disabled. - busname.target and all .busname units are skipped on purpose. Otherwise, installation into $DESTDIR has the same list of files and the autoconf install, except for .la files. It'd be great if people had a careful look at all the library linking options. I added stuff until things compiled, and in the end there's much less linking then in the old system. But it seems that there's still a lot of unnecessary deps. meson has a `shared_module` statement, which sounds like something appropriate for our nss and pam modules. Unfortunately, I couldn't get it to work. For the nss modules, we need an .so version of '2', but `shared_module` disallows the version argument. For the pam module, it also didn't work, I forgot the reason. The handling of .m4 and .in and .m4.in files is rather awkward. It's likely that this could be simplified. If make support is ever dropped, I think it'd make sense to switch to a different templating system so that two different languages and not required, which would make everything simpler yet. v2: - use get_pkgconfig_variable - use sh not bash - use add_project_arguments v3: - drop required:true and fix progs/prog typo v4: - use find_library('bz2') - add TTY_GID definition - define __SANE_USERSPACE_TYPES__ - use join_paths(prefix, ...) is used on all paths to make them all absolute v5: - replace all declare_dependency's with [] - add more conf.get guards around optional components v6: - drop -pipe, -Wall which are the default in meson - use compiler.has_function() and compiler.has_header_symbol instead of the hand-rolled checks. - fix duplication in 'liblibsystemd' library name - use the right .sym file for pam_systemd - rename 'compiler' to 'cc': shorter, and more idiomatic. v7: - use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D - rename prefix to prefixdir, rootprefix to rootprefixdir ("prefix" is too common of a name and too easy to overwrite by mistake) - wrap more stuff with conf.get('ENABLE...') == 1 - use rootprefix=='/' and rootbindir as install_dir, to fix paths under split-usr==true. v8: - use .split() also for src/coredump. Now everything is consistent ;) - add rootlibdir option and use it on the libraries that require it v9: - indentation v10: - fix check for qrencode and libaudit v11: - unify handling of executable paths, provide options for all progs This makes the meson build behave slightly differently than the autoconf-based one, because we always first try to find the executable in the filesystem, and fall back to the default. I think different handling of loadkeys, setfont, and telinit was just a historical accident. In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs. In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin), but in Debian, those directories are not included in the path. C.f. https://github.com/mesonbuild/meson/issues/1576. - call all the options 'xxx-path' for clarity. - sort man/rules/meson.build properly so it's stable
2017-04-05 11:03:47 +08:00
subdir('user')
Reference in New Issue Copy Permalink