2014-10-25 01:07:01 +08:00
Bugfixes:
2014-06-04 17:14:48 +08:00
2018-10-16 19:28:39 +08:00
* Many manager configuration settings that are only applicable to user
manager or system manager can be always set. It would be better to reject
them when parsing config.
2020-08-31 19:01:23 +08:00
* userdbctl: "Password OK: yes" is shown even when there are no passwords
or the password is locked.
2021-03-04 17:42:53 +08:00
* Get rid of nftw(). We should refuse to use such useless APIs on principle.
2013-11-29 01:42:00 +08:00
External:
2014-10-30 00:08:00 +08:00
2013-11-29 01:42:00 +08:00
* Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros.
2013-07-11 06:28:35 +08:00
2015-10-27 05:02:13 +08:00
Janitorial Clean-ups:
* Rearrange tests so that the various test-xyz.c match a specific src/basic/xyz.c again
2018-06-05 03:00:44 +08:00
* rework mount.c and swap.c to follow proper state enumeration/deserialization
semantics, like we do for device.c now
2018-06-07 23:35:58 +08:00
Features:
2021-03-23 02:07:34 +08:00
* systemd-repart: add a switch to factory reset the partition table without
immediately applying the new configuration again. i.e. --factory-reset=leave
or so. (this is useful to factory reset an image, then putting it into
another machine, ensuring that luks key is generated on new machine, not old)
2021-03-18 01:13:51 +08:00
* move logind udev rules to top-level rule.d/ directory
* move multiseat vid/pid matches from logind udev rule to hwdb
2021-03-11 05:36:20 +08:00
* nspawn: default to 1:1 userns
* Provide a reasonably bespoke solution for mounting host $HOME directories
into containers:
• add new option --mount-user=$USER for mounting $HOME of the user into the
container at the same place
• check /etc/passwd for UID or user name clashes. If UID clash pick a different
UID in container, and map via userns. If user name clash, refuse. If
matching user already exists use that.
• otherwise: write user record of specified user into /run/host/passwd or so
• in nss-systemd pick up user record from there and make available to system
With all that in place if nspawn host and container payload are up-to-date
enough we have a very simple way to make host users available in containers.
2021-03-10 06:20:53 +08:00
* systemd-sysusers: pick up passwords from credentials logic, so that users can
2021-03-11 05:36:20 +08:00
easily set root user pw. enable cred inheriting for root user from PID 1, so
that for containers we can configure the root pw automatically via nspawn's
--set-credential= switch. (Also do this for systemd-firstboot)
2021-03-10 06:20:53 +08:00
2021-02-25 22:51:13 +08:00
* whenever we receive fds via SCM_RIGHTS make sure none got dropped due to the
reception limit the kernel silently enforces.
2021-02-19 05:31:11 +08:00
* add an Open= setting to service unit files that can open arbitrary file
system paths at service startup time and pass them to the service process via
our usual socket activation protocol. If passed path refers to AF_UNIX
socket: connect() to it.
* add a ConnectSocket= setting to service unit files, that may reference a
socket unit, and which will connect to the socket defined therein, and pass
the resulting fd to the service program via socket activation proto.
* Add a concept of ListenStream=anonymous to socket units: listen on a socket
that is deleted in the fs. Usecase would be with ConnectSocket= above.
2021-02-16 02:23:05 +08:00
* Hook up journald's FSS logic with TPM2: seal the verification disk by
time-based policy, so that the verification key can remain on host and ve
validated via TPM.
2021-01-19 04:05:32 +08:00
* sd-boot: define a drop-in dir in the ESP that may contain X.509
2021-01-19 06:22:48 +08:00
certificates. If the firmware is detected to be in setup mode, automatically
2021-01-19 04:05:32 +08:00
enroll them as PK/KEK/db, turn off setup mode and proceed. Optionally,
instead of auto-enrolling them add them to the sd-boot menu, giving the user
the option to manually enroll them, after selecting the menu entry. This way,
installer images can just drop the certfiicates in the ESP, and on first boot
can easily enroll the keys without ever booting up.
* efi stub: optionally, load initrd from disk as a separate file, HMAC check it
with key from TPM, bound to PCR, refusing if failing. This would then allow
traditional distros that generate initrds locally to secure them with TPM:
after generating the initrd, do the HMAC calculation, put result in initrd
filename, done. This would then bind the validity of the initrd to the local
host, and used kernel, and means people cannot change initrd or kernel
without booting the kernel + initrd.
2021-01-14 21:14:24 +08:00
* importd: add ability download images for portabled + sysext
* importd: support image signature verification with PKCS#7 + OpenBSD signify
logic, as alternative to crummy gpg
* sd-boot: add service that automatically runs "bootctl update" on every boot,
in a graceful way, so that updated /usr trees automatically propagate into
updated boot loaders on reboot.
2021-01-12 23:54:27 +08:00
* sysext: optionally, if the merged trees allow it use bind mounts instead of
overlayfs
* nspawn: add support for sysext extensions, too. i.e. a new --extension=
switch that takes one or more arguments, and applies the extensions already
during startup.
2021-01-12 21:38:27 +08:00
* add "systemd-analyze debug" + AttachDebugger= in unit files: The former
specifies a command to execute; the latter specifies that an already running
"systemd-analyze debug" instance shall be contacted and execution paused
until it gives an OK. That way, tools like gdb or strace can be safely be
invoked on processes forked off PID 1.
2020-12-14 20:15:31 +08:00
* expose MS_NOSYMFOLLOW in various places
2020-12-28 22:17:43 +08:00
* tpm2: support a PIN policy, i.e. allowing windows-style short authentication
passwords by using the TPM2 to enforce ratelimiting and such, use for
cryptsetup and homed
2020-11-26 21:42:23 +08:00
* Add concept for upgrading TPM2 enrollments, maybe a new switch
--pcrs=4:<hash> or so, i.e. select a PCR to include in the hash, and then
override its hash
* homed: store PKCS#11 + FIDO2 token info in LUKS2 header, compatible with
systemd-cryptsetup, so that it can unlock homed volumes
* cryptenroll: politely refuse enrolling new keys to homed volumes, since we
we cannot update identity info
* TPM2: auto-reenroll in cryptsetup, as fallback for hosed firmware upgrades
and such
* cryptsetup: if only recovery keys are registered and no regular passphrases,
ask user for "recovery key", not "passphrase"
* cyptsetup: add option for automatically removing empty password slot on boot
2020-11-16 18:29:15 +08:00
* cryptsetup: optionally, when run during boot-up and password is never
2020-11-26 21:42:23 +08:00
entered, and we are on battery power (or so), power off machine again
* cryptsetup: when FIDO2/PKCS#11/TPM2 token/chip didn't show up after some
time, abort the attempt, fallback to asking for pw
* cryptsetup: when waiting for FIDO2/PKCS#11 token, tell plymouth that, and
allow plymouth to abort the waiting and enter pw instead
2020-11-16 18:29:15 +08:00
* when configuring loopback netif, and it fails due to EPERM, eat up error if
it happens to be set up alright already.
* at boot: check if battery above some threshold, if not power off again after explanation
* userdb: add field for ambient caps, so that a user can have CAP_WAKE_ALARM
for example. And add code that resets ambient caps for all services by
default.
2020-11-04 22:46:51 +08:00
* homed: try to unmount in regular intervals when home dir was busy when we
tried because idle.
2020-11-02 22:30:16 +08:00
* sd-bus: when connecting to some dbus server socker, set originating AF_UNIX
socket name in abstract namespace to include "description" string, and pick
it up from there in sd_bus_creds logic. i.e. we can use the socket peer
address as conduit for some minimal connection metainfo, and use it to
restore the "description" logic that kdbus used to have.
2020-10-24 11:07:19 +08:00
* teach LoadCredential= the ability to load all files from a specified dir as
2020-10-23 21:45:17 +08:00
individual creds
2020-10-20 20:46:55 +08:00
* systemd-analyze netif that explains predictable interface (or networkctl)
2020-10-12 19:11:55 +08:00
2020-10-20 20:46:55 +08:00
* port selinux code from mallinfo() to mallinfo2() once added to glibc
2020-10-12 19:11:55 +08:00
2020-10-07 20:11:46 +08:00
* Add service setting to run a service within the specified VRF. i.e. do the
equivalent of "ip vrf exec".
2020-09-28 22:29:20 +08:00
* export action of device object on sd-device, so that monitor becomes useful
2020-09-19 04:26:50 +08:00
* add root=tmpfs that mounts a tmpfs to /sysroot (to be used in combination
with usr=…, for a similar effect as systemd.volatile=yes but without the
"hide-out" effect). Also, add root=gpt-auto-late support or so, that is like
root=gpt-auto but initially mounts a tmpfs to /sysroot, and then revisits
later after systemd-repart ran. Usecase: let's ship images with only /usr
partition, then on first boot create the root partition. In this case we want
to read the repart data from /usr before the root partition exists. Add
usr=gpt-auto that automatically finds a /usr partition.
2020-09-23 21:25:25 +08:00
* change SwitchRoot() implementation in PID 1 to use pivot_root(".", "."), as
documented in the pivot_root(2) man page, so that we can drop the /oldroot
temporary dir.
* special case some calls of chase_symlinks() to use openat2() internally, so
that the kernel does what we otherwise do.
2020-09-19 04:26:50 +08:00
* homed: keep an fd to the homedir open at all times, to keep the fs pinned
2020-10-24 11:07:19 +08:00
(autofs and such) while user is logged in.
2020-08-17 15:10:15 +08:00
2020-09-19 04:26:50 +08:00
* nss-systemd: also synthesize shadow records for users/groups
2020-07-23 22:58:56 +08:00
2020-08-06 20:08:25 +08:00
* make use of new glibc 2.32 APIs sigabbrev_np() and strerrorname_np().
2020-08-07 06:02:17 +08:00
* when main nspawn supervisor process gets suspended due to SIGSTOP/SIGTTOU or
so, freeze the payload too.
2020-07-15 23:41:34 +08:00
* repart: support setting up dm-integrity with HMAC
* add /etc/integritytab, to support dm-integrity setups. In particular those
with HMAC as hash function, so that we can have a protected /home without
encryption (leaving encryption to the individual dirs/homed).
2020-07-14 21:06:29 +08:00
* complement root=, rootflags=, rootfstype= with rootsubdir= which allows
mounting a subdir of the root fs as actual root. This can be used as
fstype-agnostic version of btrfs' rootflags=subvol=foobar.
2020-05-26 20:46:35 +08:00
* if /usr/bin/swapoff fails due to OOM, log a friendly explanatory message about it
2020-05-26 15:21:40 +08:00
* build short web pages out of each catalog entry, build them along with man
pages, and include hyperlinks to them in the journal output
2020-05-20 01:58:26 +08:00
* machined: add API to acquire UID range. add API to mount/dissect loopback
file. Both protected by PK. Then make nspawn use these APIs to run
unprivileged containers. i.e. push the truly privileged bits into machined,
so that the client side can remain entirely unprivileged, with SUID or
anything like that.
2020-06-02 16:39:19 +08:00
* journald: do journal file writing out-of-process, with one writer process per
2020-06-27 03:30:04 +08:00
client UID, so that synthetic hash table collisions can slow down a specific
2020-06-02 16:39:19 +08:00
user's journal stream down but not the others.
2020-05-10 16:19:05 +08:00
* nspawn: support time namespaces
2020-06-27 17:15:19 +08:00
* systemd-firstboot: make sure to always use chase_symlinks() before
reading/writing files
2020-05-30 00:32:28 +08:00
* Remove any support for booting without /usr pre-mounted in the initrd entirely.
Update INITRD_INTERFACE.md accordingly.
2020-05-10 16:19:05 +08:00
* pid1: Move to tracking of main pid/control pid of units per pidfd
* pid1: support new clone3() fork-into-cgroup feature
2020-05-13 02:14:08 +08:00
* pid1: also remove PID files of a service when the service starts, not just
when it exits
2020-06-16 20:38:23 +08:00
* make us use dynamically fewer deps for containers in general purpose distros:
o turn into dlopen() deps:
- elfutils (always)
- p11-kit-trust (always)
- kmod-libs (only when called from PID 1)
2020-09-01 00:22:54 +08:00
- libblkid (only in RootImage= handling in PID 1, but not elsewhere)
2020-06-16 20:38:23 +08:00
- libpam (only when called from PID 1)
- bzip2, xz, lz4 (always — gzip and zstd should probably stay static deps the way they are,
since they are so basic and our defaults)
o move into separate libsystemd-shared-iptables.so .so
- iptables-libs (only used by nspawn + networkd)
2020-06-16 17:42:16 +08:00
* seccomp: maybe use seccomp_merge() to merge our filters per-arch if we can.
Apparently kernel performance is much better with fewer larger seccomp
filters than with more smaller seccomp filters.
2020-05-28 15:38:00 +08:00
* systemd-path: add ESP and XBOOTLDR path. Add "private" runtime/state/cache dir enum,
mapping to $RUNTIME_DIRECTORY, $STATE_DIRECTORY and such
2020-05-08 05:30:06 +08:00
* All tools that support --root= should also learn --image= so that they can
2020-07-29 00:31:48 +08:00
operate on disk images directly. Specifically: bootctl, systemctl,
coredumpctl. (Already done: systemd-nspawn, systemd-firstboot,
systemd-repart, systemd-tmpfiles, systemd-sysusers, journalctl)
2020-05-08 05:30:06 +08:00
2020-06-02 20:56:08 +08:00
* seccomp: by default mask x32 ABI system wide on x86-64. it's on its way out
* seccomp: don't install filters for ABIs that are masked anyway for the
specific service
* seccomp: maybe merge all filters we install into one with that libseccomp API that allows merging.
2020-07-23 14:46:43 +08:00
* credentials system:
- maybe add AcquireCredential= for querying a cred via ask-password
- maybe try to acquire creds via keyring?
- maybe try to pass creds via keyring?
- maybe optionally pass creds via memfd
- maybe add support for decrypting creds via TPM
- maybe add support for decrypting/importing creds via pkcs11
- make systemd-cryptsetup acquire pw via creds logic
- make PAMName= acquire pw via creds logic
- make macsec/wireguard code in networkd read key via creds logic
- make gatwayd/remote read key via creds logic
- add sd_notify() command for flushing out creds not needed anymore
2020-05-08 05:30:06 +08:00
* homed: during login resize fs automatically towards size goal. Specifically,
resize to diskSize if possible, but leave a certain amount (configured by a
new value diskLeaveFreeSize) of space free on the backing fs.
2020-05-10 16:19:05 +08:00
* homed: permit multiple user record signing keys to be used locally, and pick
the right one for signing records automatically depending on a pre-existing
signature
2020-05-06 01:36:21 +08:00
* homed: add a way to "adopt" a home directory, i.e. strip foreign signatures
and insert a local signature instead.
2020-05-09 16:37:32 +08:00
* homed: as an extension to the directory+subvolume backend: if located on
especially marked fs, then sync down password into LUKS header of that fs,
and always verify passwords against it too. Bootstrapping is a problem
2020-05-25 05:00:13 +08:00
though: if no one is logged in (or no other user even exists yet), how do you
2020-05-09 16:37:32 +08:00
unlock the volume in order to create the first user and add the first pw.
2020-05-10 16:19:05 +08:00
* homed: support new FS_IOC_ADD_ENCRYPTION_KEY ioctl for setting up fscrypt
2020-04-22 03:23:01 +08:00
* homed: maybe pre-create ~/.cache as subvol so that it can have separate quota
easily?
2020-07-07 17:33:18 +08:00
* busctl: maybe expose a verb "ping" for pinging a dbus service to see if it
exists and responds.
2020-04-13 20:31:46 +08:00
* when systemd-nspawn and suchlike dissect an OS image, and there are multiple
root partitions, do an strverscmp() on the partition label and boot
first. That is inspired how sd-boot figures out which kernel to boot, and
thus allows defining OS images which can be A/B updated and we default to the
newest version automatically, both in nspawn and in sd-boot
2020-01-29 23:55:59 +08:00
* systemd-gpt-auto should probably set x-systemd.growfs on the mounts it
creates
2019-12-11 06:47:06 +08:00
* bootctl:
- teach it to prepare an ESP wholesale, i.e. with mkfs.vfat invocation
- teach it to copy in unified kernel images and maybe type #1 boot loader spec entries from host
- make it operate on loopback files, dissecting enough to find ESP to operate on
2020-06-27 00:04:52 +08:00
* Maybe add a separate GPT partition type to the discoverable partition spec
for "hibernate" partitions, that are exactly like swap partitions but only
activated right before hibernation and thus never used for regular swapping.
2020-01-24 05:59:47 +08:00
* by default, in systemd --user service bump the OOMAdjust to 100, as privs
allow so that systemd survives
2019-07-05 00:16:30 +08:00
* cryptsetup: allow encoding key directly in /etc/crypttab, maybe with a
"base64:" prefix. Useful in particular for pkcs11 mode.
2019-12-19 23:43:39 +08:00
* cryptsetup: reimplement the mkswap/mke2fs in cryptsetup-generator to use
systemd-makefs.service instead.
2019-11-12 22:18:37 +08:00
* socket units: allow creating a udev monitor socket with ListenDevices= or so,
2020-04-22 02:46:53 +08:00
with matches, then activate app through that passing socket over
2019-11-12 22:18:37 +08:00
2020-06-16 20:38:23 +08:00
* unify on openssl (as soon as OpenSSL 3.0 is out, and the Debian license
confusion is gone)
2019-12-11 06:47:06 +08:00
- port sd_id128_get_machine_app_specific() over from khash
- port resolved over from libgcrypt (DNSSEC code)
- port journald + fsprg over from libgcrypt
- port importd over from libgcrypt
- when that's done: kill khash.c
- when that's done: kill gnutls support in resolved
* when we resize disks (homed?) always round up to 4K sectors, not 512K
* add growvol and makevol options for /etc/crypttab, similar to
x-systemd.growfs and x-systemd-makefs.
* systemd-repart: by default generate minimized partition tables (i.e. tables
2020-04-22 02:46:53 +08:00
that only cover the space actually used, excluding any free space at the
2019-12-11 06:47:06 +08:00
end), in order to maximize dd'ability. Requires libfdisk work, see
https://github.com/karelzak/util-linux/issues/907
* systemd-repart: MBR partition table support. Care needs to be taken regarding
Type=, so that partition definitions can sanely apply to both the GPT and the
MBR case. Idea: accept syntax "Type=gpt:home mbr:0x83" for setting the types
for the two partition types explicitly. And provide an internal mapping so
that "Type=linux-generic" maps to the right types for both partition tables
automatically.
* systemd-repart: allow sizing partitions as factor of available RAM, so that
we can reasonably size swap partitions for hibernation.
2020-01-28 22:04:49 +08:00
* systemd-repart: allow managing the gpt read-only partition flag + auto-mount flag
2020-06-27 00:04:52 +08:00
* systemd-repart: allow boolean option that ensures that if existing partition
doesn't exist within the configured size bounds the whole command fails. This
is useful to implement ESP vs. XBOOTLDR schemes in installers: have one set
of repart files for the case where ESP is large enough and one where it isn't
and XBOOTLDR is added in instead. Then apply the former first, and if it
fails to apply use the latter.
* systemd-repart: add per-partition option to never reuse existing partition
and always create anew even if matching partition already exists.
* systemd-repart: add per-partition option to fail if partition already exist,
i.e. is not added new. Similar, add option to fail if partition does not exist yet.
2020-01-28 22:04:49 +08:00
* systemd-repart: allow disabling growing of specific partitions, or making
them (think ESP: we don't ever want to grow it, since we cannot resize vfat)
2020-01-30 20:46:19 +08:00
* systemd-repart: make it a static checker during early boot for existence and
2020-01-28 22:04:49 +08:00
absence of other partitions for trusted boot environments
2020-04-02 22:00:06 +08:00
* userdb: allow username prefix searches in varlink API, allow realname and
realname substr searches in varlink API
2020-01-28 22:04:49 +08:00
2020-04-29 02:02:39 +08:00
* userdb: allow uid/gid range checks
2020-01-30 20:46:19 +08:00
* userdb: allow existence checks
2020-01-28 22:04:49 +08:00
2020-05-10 16:19:05 +08:00
* pid1: activation by journal search expression
2020-01-28 22:04:49 +08:00
2019-12-11 06:47:06 +08:00
* when switching root from initrd to host, set the machine_id env var so that
if the host has no machine ID set yet we continue to use the random one the
initrd had set.
2019-11-29 18:51:04 +08:00
* sd-event: add native support for P_ALL waitid() watching, then move PID 1 to
2020-12-17 01:16:16 +08:00
it for reaping assigned but unknown children. This needs to some special care
2019-11-29 18:51:04 +08:00
to operate somewhat sensibly in light of priorities: P_ALL will return
arbitrary processes, regardless of the priority we want to watch them with,
hence on each event loop iteration check all processes which we shall watch
with higher prio explicitly, and then watch the entire rest with P_ALL.
* tweak sd-event's child watching: keep a prioq of children to watch and use
waitid() only on the children with the highest priority until one is waitable
and ignore all lower-prio ones from that point on
* maybe introduce xattrs that can be set on the root dir of the root fs
partition that declare the volatility mode to use the image in. Previously I
thought marking this via GPT partition flags but that's not ideal since
that's outside of the LUKS encryption/verity verification, and we probably
shouldn't operate in a volatile mode unless we got told so from a trusted
source.
* figure out automatic partition discovery when combining writable root dir
with immutable /usr
2019-08-20 22:21:01 +08:00
* coredump: maybe when coredumping read a new xattr from /proc/$PID/exe that
may be used to mark a whole binary as non-coredumpable. Would fix:
https://bugs.freedesktop.org/show_bug.cgi?id=69447
2019-11-13 19:55:59 +08:00
* teach parse_timestamp() timezones like the calendar spec already knows it
2019-08-13 20:40:30 +08:00
* beef up hibernation to optionally do swapon/swapoff immediately before/after
the hibernation
2019-07-29 18:49:13 +08:00
* beef up s2h to implement a battery watch loop: instead of entering
hibernation unconditionally after coming back from resume make a decision
based on the battery load level: if battery level is above a specific
threshold, go to suspend again, only hibernate if below it. This means we'd
stick to suspend usually, but fall back to hibernation only when battery runs
empty (well, subject to our sampling interval). Related to this, check if we
can make ACPI _BTP (i.e. /sys/class/power_supply/*/alarm) work for us too,
i.e. see if it can wake up machines from suspend, so that we could resume
automatically when the system is low on power and move automatically to
hibernation mode. (see
https://uefi.org/sites/default/files/resources/ACPI%206_2_A_Sept29.pdf
section 10.2.2.8 and
https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-wake-sources
at the end).
2019-07-26 01:25:50 +08:00
* add an explicit "vertical" mode to format-table, so that "systemctl
status"-like outputs (i.e. with a series of field names left and values
right) become genuine first class citizens, and we gain automatic, sane JSON
output for them.
2019-07-24 02:21:07 +08:00
* We should probably replace /var/log/README, /etc/rc.d/README with symlinks
that are linked to these places instead of copied. After all they are
constant vendor data.
2020-05-14 16:13:40 +08:00
* maybe add kernel cmdline params: to force random seed crediting
2019-07-22 16:22:56 +08:00
* nspawn: on cgroupsv1 issue cgroup empty handler process based on host events,
so that we make cgroup agent logic safe
* nspawn/machined: add API to invoke binary in container, then use that as
fallback in "machinectl shell"
2019-06-23 02:12:44 +08:00
2019-06-23 22:13:26 +08:00
* logind: rework pam_logind to also do a bus call in case of invocation from
user@.service, which returns the XDG_RUNTIME_DIR value, and make this
behaviour selectable via pam module option.
2019-07-05 00:16:30 +08:00
* homed:
- when user tries to log into record signed by unrecognized key, automatically add key to our chain after polkit auth
- rollback when resize fails mid-operation
- GNOME's side for forget key on suspend (requires rework so that lock screen runs outside of uid)
- resize on login?
- shrink fs on logout?
- update LUKS password on login if we find there's a password that unlocks the JSON record but not the LUKS device.
- create on activate?
- properties: icon url?, preferred session type?, administrator bool (which translates to 'wheel' membership)?, address?, telephone?, vcard?, samba stuff?, parental controls?
- communicate clearly when usb stick is safe to remove. probably involves
beefing up logind to make pam session close hook synchronous and wait until
systemd --user is shut down.
- logind: maybe keep a "busy fd" as long as there's a non-released session around or the user@.service
2020-07-07 17:33:18 +08:00
- maybe make automatic, read-only, time-based reflink-copies of LUKS disk
images (and btrfs snapshots of subvolumes) (think: time machine)
2020-04-22 02:46:53 +08:00
- distinguish destroy / remove (i.e. currently we can unregister a user, unregister+remove their home directory, but not just remove their home directory)
2019-07-05 00:16:30 +08:00
- in systemd's PAMName= logic: query passwords with ssh-askpassword, so that we can make "loginctl set-linger" mode work
- fingerprint authentication, pattern authentication, …
- make sure "classic" user records can also be managed by homed
- make size of $XDG_RUNTIME_DIR configurable in user record
- query password from kernel keyring first
- update even if record is "absent"
- add a "access mode" + "fstype" field to the "status" section of json identity records reflecting the actually used access mode and fstype, even on non-luks backends
- move acct mgmt stuff from pam_systemd_home to pam_systemd?
- when "homectl --pkcs11-token-uri=" is used, synthesize ssh-authorized-keys records for all keys we have private keys on the stick for
- make slice for users configurable (requires logind rework)
- logind: populate auto-login list bus property from PKCS#11 token
- when determining state of a LUKS home directory, check DM suspended sysfs file
2020-07-07 17:33:18 +08:00
- introduce API for "making room", that grows/shrinks home directory
according to elastic parameters, discards blocks, and removes additional snapshots. Call it
either from UI when disk space gets low
2019-07-05 00:16:30 +08:00
2019-06-23 22:13:26 +08:00
* introduce a new per-process uuid, similar to the boot id, the machine id, the
invocation id, that is derived from process creds, specifically a hashed
combination of AT_RANDOM + getpid() + the starttime from
/proc/self/status. Then add these ids implicitly when logging. Deriving this
uuid from these three things has the benefit that it can be derived easily
from /proc/$PID/ in a stable, and unique way that changes on both fork() and
exec().
* let's not GC a unit while its ratelimits are still pending
2019-04-12 20:13:17 +08:00
* when killing due to service watchdog timeout maybe detect whether target
process is under ptracing and then log loudly and continue instead.
2019-04-28 19:00:36 +08:00
* introduce a new group to own TPM devices
* make rfkill uaccess controllable by default, i.e. steal rule from
gnome-bluetooth and friends
2019-03-28 19:00:28 +08:00
* tweak journald context caching. In addition to caching per-process attributes
keyed by PID, cache per-cgroup attributes (i.e. the various xattrs we read)
keyed by cgroup path, and guarded by ctime changes. This should provide us
with a nice speed-up on services that have many processes running in the same
cgroup.
2018-12-10 23:09:30 +08:00
* make MAINPID= message reception checks even stricter: if service uses User=,
then check sending UID and ignore message if it doesn't match the user or
root.
* maybe trigger a uevent "change" on a device if "systemctl reload xyz.device"
is issued.
2018-11-30 00:19:41 +08:00
* when importing an fs tree with machined, optionally apply userns-rec-chown
* when importing an fs tree with machined, complain if image is not an OS
2018-11-26 23:18:41 +08:00
* Maybe introduce a helper safe_exec() or so, which is to execve() which
safe_fork() is to fork(). And then make revert the RLIMIT_NOFILE soft limit
to 1K implicitly, unless explicitly opted-out.
2018-11-26 20:41:07 +08:00
2019-06-27 15:54:20 +08:00
* rework seccomp/nnp logic that even if User= is used in combination with
2018-11-08 00:41:55 +08:00
a seccomp option we don't have to set NNP. For that, change uid first whil
keeping CAP_SYS_ADMIN, then apply seccomp, the drop cap.
2018-11-14 06:05:36 +08:00
* add a concept for automatically loading per-unit secrets off disk and
inserting them into the kernel keyring. Maybe SecretsDirectory= similar to
ConfigurationDirectory=.
2018-11-12 20:19:07 +08:00
* when no locale is configured, default to UEFI's PlatformLang variable
2018-10-17 17:38:57 +08:00
* bootctl,sd-boot: actually honour the "architecture" key
2018-10-11 16:15:21 +08:00
2018-11-08 00:41:55 +08:00
* add a new syscall group "@esoteric" for more esoteric stuff such as bpf() and
usefaultd() and make systemd-analyze check for it.
2018-08-07 17:01:46 +08:00
* paranoia: whenever we process passwords, call mlock() on the memory
2019-07-10 19:54:50 +08:00
first. i.e. look for all places we use free_and_erasep() and
2019-07-10 19:48:55 +08:00
augment them with mlock(). Also use MADV_DONTDUMP.
2018-08-07 17:01:46 +08:00
2018-09-27 23:11:01 +08:00
* Move RestrictAddressFamily= to the new cgroup create socket
* support the bind/connect/sendmsg cgroup stuff for sandboxing, and possibly
patching around
2018-10-08 21:46:04 +08:00
* maybe implicitly attach monotonic+realtime timestamps to outgoing messages in
log.c and sd-journal-send
2018-08-07 17:01:46 +08:00
* optionally: turn on cgroup delegation for per-session scope units
2018-10-01 21:47:50 +08:00
* introduce per-unit (i.e. per-slice, per-service) journal log size limits.
2018-06-22 23:16:18 +08:00
* sd-boot: automatically load EFI modules from some drop-in dir, so that people
can add in file system drivers and such
* sd-boot: optionally, show boot menu when previous default boot item has
non-zero "tries done" count
2018-07-03 00:22:07 +08:00
* introduce an option (or replacement) for "systemctl show" that outputs all
properties as JSON, similar to busctl's new JSON output. In contrast to that
it should skip the variant type string though.
* augment CODE_FILE=, CODE_LINE= with something like CODE_BASE= or so which
contains some identifier for the project, which allows us to include
clickable links to source files generating these log messages. The identifier
could be some abberviated URL prefix or so (taking inspiration from Go
imports). For example, for systemd we could use
CODE_BASE=github.com/systemd/systemd/blob/98b0b1123cc or so which is
sufficient to build a link by prefixing "http://" and suffixing the
CODE_FILE.
* Augment MESSAGE_ID with MESSAGE_BASE, in a similar fashion so that we can
make clickable links from log messages carrying a MESSAGE_ID, that lead to
some explanatory text online.
2018-07-16 18:19:05 +08:00
* maybe extend .path units to expose fanotify() per-mount change events
2018-07-20 22:38:53 +08:00
* Add a "systemctl list-units --by-slice" mode or so, which rearranges the
output of "systemctl list-units" slightly by showing the tree structure of
the slices, and the units attached to them.
2018-08-10 22:20:42 +08:00
* the a-posteriori stopping of units bound to units that disappeared logic
should be reworked: there should be a queue of units, and we should only
2020-02-05 01:39:04 +08:00
enqueue stop jobs from a defer event that processes queue instead of
2018-08-10 22:20:42 +08:00
right-away when we find a unit that is bound to one that doesn't exist
anymore. (similar to how the stop-unneeded queue has been reworked the same
way)
2018-06-21 01:36:06 +08:00
2018-07-26 22:55:27 +08:00
* nspawn: make nspawn suitable for shell pipelines: instead of triggering a
hangup when input is finished, send ^D, which synthesizes an EOF. Then wait
for hangup or ^D before passing on the EOF.
2018-06-05 03:00:44 +08:00
* When reloading configuration PID 1 should reset all its properties to the
original defaults before calling parse_config()
2018-05-07 23:50:31 +08:00
* nspawn: greater control over selinux label?
2018-05-01 03:20:31 +08:00
2018-09-13 03:39:14 +08:00
* hibernate/s2h: make this robust and safe to enable in Fedora by default.
Specifically:
1. add resume_offset support to the resume code (i.e. support swap files
properly)
2018-09-26 13:31:10 +08:00
2. check if swap is on weird storage and refuse if so
2019-11-30 22:33:59 +08:00
3. add auto-detection of hibernation images
2018-09-13 03:39:14 +08:00
2018-04-21 00:09:53 +08:00
* cgroups: use inotify to get notified when somebody else modifies cgroups
owned by us, then log a friendly warning.
2018-04-20 21:22:02 +08:00
* beef up log.c with support for stripping ANSI sequences from strings, so that
it is OK to include them in log strings. This would be particularly useful so
that our log messages could contain clickable links for example for unit
files and suchlike we operate on.
2018-04-21 00:09:53 +08:00
2018-04-16 18:37:25 +08:00
* add support for "portablectl attach http://foobar.com/waaa.raw (i.e. importd integration)
* add attach --enable and attach --now (for attach+enable+start)
* sync dynamic uids/gids between host+portable srvice (i.e. if DynamicUser=1 is set for a service, make sure that the
selected user is resolvable in the service even if it ships its own /etc/passwd)
2018-04-18 18:42:22 +08:00
* Fix DECIMAL_STR_MAX or DECIMAL_STR_WIDTH. One includes a trailing NUL, the
2019-04-27 08:22:40 +08:00
other doesn't. What a disaster. Probably to exclude it. Also
2018-04-18 18:42:22 +08:00
DECIMAL_STR_WIDTH should probably add an extra "-" into account for negative
numbers.
2018-06-06 17:44:58 +08:00
* Check that users of inotify's IN_DELETE_SELF flag are using it properly, as
usually IN_ATTRIB is the right way to watch deleted files, as the former only
fires when a file is actually removed from disk, i.e. the link count drops to
zero and is not open anymore, while the latter happens when a file is
unlinked from any dir.
2018-09-25 01:01:08 +08:00
* port systemctl, busctl, … over to format-table.[ch]'s table formatters
2018-04-18 18:42:22 +08:00
2018-04-07 00:57:48 +08:00
* pid1: lock image configured with RootDirectory=/RootImage= using the usual nspawn semantics while the unit is up
* add --vacuum-xyz options to coredumpctl, matching those journalctl already has.
2018-03-29 23:47:03 +08:00
* introduce Ephemeral= unit file switch, that creates an ephemeral copy of all
files and directories that are left writable for a unit, and which are
removed after the unit goes down again. A bit like --ephemeral for
systemd-nspawn but for system services. If used together with RootImage= this
should reflink the image file itself.
Related: add Ephemeral=<path1> <path2> … which would allow marking
specific paths only like this.
* add CopyFile= or so as unit file setting that may be used to copy files or
2019-04-27 08:22:40 +08:00
directory trees from the host to the services RootImage= and RootDirectory=
2018-03-29 23:47:03 +08:00
environment. Which we can use for /etc/machine-id and in particular
/etc/resolv.conf. Should be smart and do something useful on read-only
2020-08-20 17:23:26 +08:00
images, for example fall back to read-only bind mounting the file instead.
2018-03-29 23:47:03 +08:00
2018-03-21 03:26:15 +08:00
* show invocation ID in systemd-run output
* bypass SIGTERM state in unit files if KillSignal is SIGKILL
2018-03-01 03:21:57 +08:00
* add proper dbus APIs for the various sd_notify() commands, such as MAINPID=1
and so on, which would mean we could report errors and such.
2018-02-08 06:03:13 +08:00
* teach tmpfiles.d q/Q logic something sensible in the context of XFS/ext4
project quota
2018-02-01 02:53:16 +08:00
2018-02-14 21:28:00 +08:00
* introduce DefaultSlice= or so in system.conf that allows changing where we
place our units by default, i.e. change system.slice to something
else. Similar, ManagerSlice= should exist so that PID1's own scope unit could
be moved somewhere else too. Finally machined and logind should get similar
options so that it is possible to move user session scopes and machines to a
different slice too by default. Usecase: people who want to put resources on
the entire system, with the exception of one specific service. See:
https://lists.freedesktop.org/archives/systemd-devel/2018-February/040369.html
2018-01-25 21:14:35 +08:00
* maybe rework get_user_creds() to query the user database if $SHELL is used
for root, but only then.
2018-01-22 22:33:26 +08:00
2017-12-30 22:21:12 +08:00
* be stricter with fds we receive for the fdstore: close them asynchronously
* calenderspec: add support for week numbers and day numbers within a
year. This would allow us to define "bi-weekly" triggers safely.
2017-12-21 02:48:23 +08:00
* sd-bus: add vtable flag, that may be used to request client creds implicitly
and asynchronously before dispatching the operation
2020-09-15 20:49:36 +08:00
* sd-bus: parse addresses given in sd_bus_set_addresses immediately and not
only when used. Add unit tests.
2017-11-27 19:42:35 +08:00
* make use of ethtool veth peer info in machined, for automatically finding out
host-side interface pointing to the container.
2017-11-25 01:29:29 +08:00
* add some special mode to LogsDirectory=/StateDirectory=… that allows
declaring these directories without necessarily pulling in deps for them, or
creating them when starting up. That way, we could declare that
systemd-journald writes to /var/log/journal, which could be useful when we
doing disk usage calculations and so on.
2018-03-02 23:25:27 +08:00
* taint systemd if there are fewer than 65536 users assigned (userns) to the system.
2017-11-22 20:56:10 +08:00
2018-11-16 21:30:29 +08:00
* deprecate RootDirectoryStartOnly= in favour of a new ExecStart= prefix char
2017-11-22 20:56:10 +08:00
2017-11-15 18:25:38 +08:00
* add a new RuntimeDirectoryPreserve= mode that defines a similar lifecycle for
the runtime dir as we maintain for the fdstore: i.e. keep it around as long
as the unit is running or has a job queued.
2018-10-11 16:27:59 +08:00
* support projid-based quota in machinectl for containers
2017-11-18 01:03:00 +08:00
2017-10-24 18:18:17 +08:00
* add a way to lock down cgroup migration: a boolean, which when set for a unit
makes sure the processes in it can never migrate out of it
* blog about fd store and restartable services
* document Environment=SYSTEMD_LOG_LEVEL=debug drop-in in debugging document
2017-10-28 01:01:21 +08:00
* rework ExecOutput and ExecInput enums so that EXEC_OUTPUT_NULL loses its
magic meaning and is no longer upgraded to something else if set explicitly.
2017-10-24 18:18:17 +08:00
* in the long run: permit a system with /etc/machine-id linked to /dev/null, to
make it lose its identity, i.e. be anonymous. For this we'd have to patch
through the whole tree to make all code deal with the case where no machine
ID is available.
* optionally, collect cgroup resource data, and store it in per-unit RRD files,
suitable for processing with rrdtool. Add bus API to access this data, and
possibly implement a CPULoad property based on it.
2017-11-09 01:36:59 +08:00
* beef up pam_systemd to take unit file settings such as cgroups properties as
parameters
2017-10-09 21:22:22 +08:00
* maybe hook of xfs/ext4 quotactl() with services? i.e. automatically manage
2020-11-13 15:19:49 +08:00
the quota of the user indicated in User= via unit file settings, like the
2017-11-18 01:03:00 +08:00
other resource management concepts. Would mix nicely with DynamicUser=1. Or
alternatively, do this with projids, so that we can also cover services
running as root. Quota should probably cover all the special dirs such as
StateDirectory=, LogsDirectory=, CacheDirectory=, as well as RootDirectory= if it
is set, plus the whole disk space any image configured with RootImage=.
2017-10-09 21:22:22 +08:00
2017-11-16 22:21:06 +08:00
* In DynamicUser= mode: before selecting a UID, use disk quota APIs on relevant
disks to see if the UID is already in use.
2017-11-14 00:21:27 +08:00
* add "systemctl wait" or so, which does what "systemd-run --wait" does, but
for all units. It should be both a way to pin units into memory as well as a
wait to retrieve their exit data.
2017-09-28 17:26:11 +08:00
* expose IO accounting data on the bus, show it in systemd-run --wait and log
about it in the resource log message
* show whether a service has out-of-date configuration in "systemctl status" by
using mtime data of ConfigurationDirectory=.
2017-07-11 00:25:58 +08:00
* Add AddUser= setting to unit files, similar to DynamicUser=1 which however
creates a static, persistent user rather than a dynamic, transient user. We
can leverage code from sysusers.d for this.
2017-04-25 00:48:10 +08:00
* add some optional flag to ReadWritePaths= and friends, that has the effect
that we create the dir in question when the service is started. Example:
ReadWritePaths=:/var/lib/foobar
2017-02-06 20:49:40 +08:00
* maybe add call sd_journal_set_block_timeout() or so to set SO_SNDTIMEO for
the sd-journal logging socket, and, if the timeout is set to 0, sets
O_NONBLOCK on it. That way people can control if and when to block for
logging.
2017-02-28 22:24:10 +08:00
* hostnamed: populate form factor data from a new hwdb database, so that old
yogas can be recognized as "convertible" too, even if they predate the DMI
"convertible" form factor
2016-11-24 08:51:36 +08:00
* Add ExecMonitor= setting. May be used multiple times. Forks off a process in
the service cgroup, which is supposed to monitor the service, and when it
exits the service is considered failed by its monitor.
2017-02-07 03:26:33 +08:00
* track the per-service PAM process properly (i.e. as an additional control
process), so that it may be queried on the bus and everything.
* add a new "debug" job mode, that is propagated to unit_start() and for
services results in two things: we raise SIGSTOP right before invoking
execve() and turn off watchdog support. Then, use that to implement
"systemd-gdb" for attaching to the start-up of any system service in its
natural habitat.
2016-12-07 02:26:48 +08:00
* gpt-auto logic: related to the above, maybe support a "secondary" root
partition, that is mounted to / and is writable, and where the actual root's
/usr is mounted into.
* gpt-auto logic: support encrypted swap, add kernel cmdline option to force it, and honour a gpt bit about it, plus maybe a configuration file
2016-10-25 18:43:53 +08:00
* drop nss-myhostname in favour of nss-resolve?
2016-10-21 01:19:34 +08:00
* add a percentage syntax for TimeoutStopSec=, e.g. TimeoutStopSec=150%, and
then use that for the setting used in user@.service. It should be understood
relative to the configured default value.
2016-10-06 17:54:03 +08:00
* in networkd, when matching device types, fix up DEVTYPE rubbish the kernel passes to us
* enable LockMLOCK to take a percentage value relative to physical memory
2016-08-25 02:53:56 +08:00
* Permit masking specific netlink APIs with RestrictAddressFamily=
2016-07-14 18:26:07 +08:00
* nspawn: support that /proc, /sys/, /dev are pre-mounted
* define gpt header bits to select volatility mode
2016-05-13 02:14:46 +08:00
* ProtectClock= (drops CAP_SYS_TIMES, adds seecomp filters for settimeofday, adjtimex), sets DeviceAllow o /dev/rtc
2016-08-25 02:53:56 +08:00
* ProtectTracing= (drops CAP_SYS_PTRACE, blocks ptrace syscall, makes /sys/kernel/tracing go away)
2016-05-13 02:14:46 +08:00
2016-08-25 02:53:56 +08:00
* ProtectMount= (drop mount/umount/pivot_root from seccomp, disallow fuse via DeviceAllow, imply Mountflags=slave)
2016-07-02 09:39:26 +08:00
2016-08-25 02:53:56 +08:00
* ProtectKeyRing= to take keyring calls away
2016-08-15 20:48:14 +08:00
2016-08-04 00:40:48 +08:00
* RemoveKeyRing= to remove all keyring entries of the specified user
2016-10-08 02:32:23 +08:00
* ProtectReboot= that masks reboot() and kexec_load() syscalls, prohibits kill
on PID 1 with the relevant signals, and makes relevant files in /sys and
/proc (such as the sysrq stuff) unavailable
2016-05-06 22:55:44 +08:00
* make sure the ratelimit object can deal with USEC_INFINITY as way to turn off things
2016-05-05 01:01:46 +08:00
2016-04-26 21:47:03 +08:00
* journalctl: make sure -f ends when the container indicated by -M terminates
2016-08-15 20:48:14 +08:00
* mount: automatically search for "main" partition of an image has multiple
partitions
2016-08-04 00:40:48 +08:00
* in nss-systemd, if we run inside of RootDirectory= with PrivateUsers= set,
find a way to map the User=/Group= of the service to the right name. This way
a user/group for a service only has to exist on the host for the right
mapping to work.
2016-08-15 20:48:14 +08:00
* add bus API for creating unit files in /etc, reusing the code for transient units
* add bus API to remove unit files from /etc
* add bus API to retrieve current unit file contents (i.e. implement "systemctl cat" on the bus only)
2016-04-20 21:27:27 +08:00
* rework fopen_temporary() to make use of open_tmpfile_linkable() (problem: the
kernel doesn't support linkat() that replaces existing files, currently)
2016-02-25 00:20:12 +08:00
* transient units: don't bother with actually setting unit properties, we
reload the unit file anyway
* journald: sigbus API via a signal-handler safe function that people may call
from the SIGBUS handler
2016-02-19 05:54:57 +08:00
* optionally, also require WATCHDOG=1 notifications during service start-up and shutdown
2016-02-11 05:54:33 +08:00
* delay activation of logind until somebody logs in, or when /dev/tty0 pulls it
in or lingering is on (so that containers don't bother with it until PAM is used). also exit-on-idle
2016-01-15 01:08:29 +08:00
* cache sd_event_now() result from before the first iteration...
2015-11-11 21:32:26 +08:00
* PID1: find a way how we can reload unit file configuration for
specific units only, without reloading the whole of systemd
2016-04-29 03:02:11 +08:00
* add an explicit parser for LimitRTPRIO= that verifies
2015-11-11 00:36:10 +08:00
the specified range and generates sane error messages for incorrect
2016-04-29 03:02:11 +08:00
specifications.
2015-11-11 00:36:10 +08:00
2015-10-20 04:30:11 +08:00
* when we detect that there are waiting jobs but no running jobs, do something
2019-12-05 17:31:55 +08:00
* push CPUAffinity= also into the "cpuset" cgroup controller
2015-09-17 07:19:06 +08:00
2015-08-17 00:25:24 +08:00
* PID 1 should send out sd_notify("WATCHDOG=1") messages (for usage in the --user mode, and when run via nspawn)
2015-06-19 07:12:54 +08:00
* there's probably something wrong with having user mounts below /sys,
2019-04-27 08:22:40 +08:00
as we have for debugfs. for example, src/core/mount.c handles mounts
2015-06-19 07:12:54 +08:00
prefixed with /sys generally special.
http://lists.freedesktop.org/archives/systemd-devel/2015-June/032962.html
2015-04-09 19:11:38 +08:00
* fstab-generator: default to tmpfs-as-root if only usr= is specified on the kernel cmdline
2015-04-08 23:24:23 +08:00
* docs: bring http://www.freedesktop.org/wiki/Software/systemd/MyServiceCantGetRealtime up to date
2015-04-07 22:45:09 +08:00
* add a job mode that will fail if a transaction would mean stopping
running units. Use this in timedated to manage the NTP service
state.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030229.html
2015-01-29 00:48:01 +08:00
* The udev blkid built-in should expose a property that reflects
whether media was sensed in USB CF/SD card readers. This should then
be used to control SYSTEMD_READY=1/0 so that USB card readers aren't
picked up by systemd unless they contain a medium. This would mirror
the behaviour we already have for CD drives.
2014-12-19 09:07:35 +08:00
* hostnamectl: show root image uuid
2014-12-16 01:48:20 +08:00
* Find a solution for SMACK capabilities stuff:
http://lists.freedesktop.org/archives/systemd-devel/2014-December/026188.html
2014-12-13 00:30:02 +08:00
2014-12-05 21:09:33 +08:00
* "systemctl preset-all" should probably order the unit files it
operates on lexicographically before starting to work, in order to
ensure deterministic behaviour if two unit files conflict (like DMs
do, for example)
2014-12-04 11:17:09 +08:00
* synchronize console access with BSD locks:
http://lists.freedesktop.org/archives/systemd-devel/2014-October/024582.html
2016-09-13 03:20:33 +08:00
* as soon as we have sender timestamps, revisit coalescing multiple parallel daemon reloads:
2014-12-04 11:17:09 +08:00
http://lists.freedesktop.org/archives/systemd-devel/2014-December/025862.html
2014-11-26 21:14:17 +08:00
* figure out when we can use the coarse timers
2014-11-19 06:35:46 +08:00
* add "systemctl start -v foobar.service" that shows logs of a service
while the start command runs. This is non-trivial to do without
races though, since we should flush out all journal messages before
returning from the "systemctl stop".
2014-11-26 19:11:39 +08:00
* firstboot: make it useful to be run immediately after yum --installroot to set up a machine. (most specifically, make --copy-root-password work even if /etc/passwd already exists
2014-11-13 06:44:14 +08:00
2014-11-07 23:31:42 +08:00
* maybe add support for specifier expansion in user.conf, specifically DefaultEnvironment=
2014-10-23 02:24:16 +08:00
* maybe allow timer units with an empty Units= setting, so that they
can be used for resuming the system but nothing else.
2014-11-13 20:11:04 +08:00
* what to do about udev db binary stability for apps? (raw access is not an option)
2014-10-22 18:40:49 +08:00
2014-11-26 10:18:17 +08:00
* systemctl: if some operation fails, show log output?
2014-09-04 00:59:17 +08:00
2016-01-26 20:37:42 +08:00
* exponential backoff in timesyncd when we cannot reach a server
2014-08-26 09:59:05 +08:00
2016-01-26 20:37:42 +08:00
* timesyncd: add ugly bus calls to set NTP servers per-interface, for usage by NM
2015-11-16 22:05:00 +08:00
2014-08-16 00:01:30 +08:00
* merge ~/.local/share and ~/.local/lib into one similar /usr/lib and /usr/share....
2015-03-25 06:05:43 +08:00
* add systemd.abort_on_kill or some other such flag to send SIGABRT instead of SIGKILL
(throughout the codebase, not only PID1)
2014-07-16 06:31:27 +08:00
* resolved:
- mDNS/DNS-SD
2015-11-24 06:12:27 +08:00
- service registration
- service/domain/types browsing
2014-07-31 23:47:09 +08:00
- avahi compat
2014-07-16 06:31:27 +08:00
- DNS-SD service registration from socket units
2015-11-16 22:05:00 +08:00
- resolved should optionally register additional per-interface LLMNR
names, so that for the container case we can establish the same name
(maybe "host") for referencing the server, everywhere.
2016-01-26 20:37:42 +08:00
- allow clients to request DNSSEC for a single lookup even if DNSSEC is off (?)
2016-06-24 17:45:06 +08:00
- hook up resolved with machined-based address resolution
2014-07-30 23:28:04 +08:00
2015-11-16 22:05:00 +08:00
* refcounting in sd-resolve is borked
2014-07-10 01:20:48 +08:00
2014-07-01 19:51:26 +08:00
* Add a new verb "systemctl top"
2014-07-07 17:48:06 +08:00
* add new gpt type for btrfs volumes
2014-05-22 15:14:50 +08:00
* generator that automatically discovers btrfs subvolumes, identifies their purpose based on some xattr on them.
2014-05-06 03:18:54 +08:00
* a way for container managers to turn off getty starting via $container_headless= or so...
2014-05-02 23:56:01 +08:00
* figure out a nice way how we can let the admin know what child/sibling unit causes cgroup membership for a specific unit
2014-06-18 09:46:44 +08:00
* For timer units: add some mechanisms so that timer units that trigger immediately on boot do not have the services
they run added to the initial transaction and thus confuse Type=idle.
2014-04-24 04:41:44 +08:00
2014-03-15 04:10:55 +08:00
* add bus api to query unit file's X fields.
2014-03-06 05:31:03 +08:00
* gpt-auto-generator:
2014-03-08 11:05:48 +08:00
- Define new partition type for encrypted swap? Support probed LUKS for encrypted swap?
2014-03-06 05:31:03 +08:00
- Make /home automount rather than mount?
2014-02-25 00:34:37 +08:00
* add generator that pulls in systemd-network from containers when
CAP_NET_ADMIN is set, more than the loopback device is defined, even
when it is otherwise off
2014-02-24 20:21:55 +08:00
2016-04-29 03:02:11 +08:00
* MessageQueueMessageSize= (and suchlike) should use parse_iec_size().
2014-02-23 10:18:46 +08:00
2014-02-14 23:40:52 +08:00
* implement Distribute= in socket units to allow running multiple
service instances processing the listening socket, and open this up
for ReusePort=
2013-11-29 01:42:00 +08:00
* cgroups:
- implement per-slice CPUFairScheduling=1 switch
- introduce high-level settings for RT budget, swappiness
- how to reset dynamically changed unit cgroup attributes sanely?
- when reloading configuration, apply new cgroup configuration
- when recursively showing the cgroup hierarchy, optionally also show
the hierarchies of child processes
2013-11-26 01:08:02 +08:00
2013-11-29 01:42:00 +08:00
* transient units:
- add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt
2013-11-22 02:34:37 +08:00
2013-11-20 04:12:59 +08:00
* when we detect low battery and no AC on boot, show pretty splash and refuse boot
* libsystemd-journal, libsystemd-login, libudev: add calls to easily attach these objects to sd-event event loops
2013-11-11 10:03:17 +08:00
* be more careful what we export on the bus as (usec_t) 0 and (usec_t) -1
2013-10-14 10:52:51 +08:00
* rfkill,backlight: we probably should run the load tools inside of the udev rules so that the state is properly initialized by the time other software sees it
2013-10-04 23:01:32 +08:00
* After coming back from hibernation reset hibernation swap partition using the /dev/snapshot ioctl APIs
2013-09-17 23:01:08 +08:00
2013-10-22 07:50:48 +08:00
* If we try to find a unit via a dangling symlink, generate a clean
error. Currently, we just ignore it and read the unit from the search
2013-09-13 20:28:17 +08:00
path anyway.
2016-08-25 02:53:56 +08:00
* refuse boot if /usr/lib/os-release is missing or /etc/machine-id cannot be set up
2013-09-13 00:09:00 +08:00
2013-07-10 08:01:14 +08:00
* man: the documentation of Restart= currently is very misleading and suggests the tools from ExecStartPre= might get restarted.
* load .d/*.conf dropins for device units
2014-01-14 00:30:51 +08:00
* sd-bus:
2015-08-20 18:20:14 +08:00
- EBADSLT handling
2015-01-10 04:32:29 +08:00
- GetAllProperties() on a non-existing object does not result in a failure currently
2014-11-26 22:01:50 +08:00
- port to sd-resolve for connecting to TCP dbus servers
2014-11-05 00:54:40 +08:00
- see if we can introduce a new sd_bus_get_owner_machine_id() call to retrieve the machine ID of the machine of the bus itself
2013-11-29 01:42:00 +08:00
- see if we can drop more message validation on the sending side
- add API to clone sd_bus_message objects
2014-01-23 03:29:57 +08:00
- longer term: priority inheritance
2013-12-22 07:12:54 +08:00
- dbus spec updates:
- NameLost/NameAcquired obsolete
- GVariant
2014-03-11 06:17:42 +08:00
- path escaping
2014-01-18 02:59:50 +08:00
- update systemd.special(7) to mention that dbus.socket is only about the compatibility socket now
2013-11-29 01:42:00 +08:00
* sd-event
2013-12-13 11:03:30 +08:00
- allow multiple signal handlers per signal?
2014-10-06 03:29:20 +08:00
- document chaining of signal handler for SIGCHLD and child handlers
2015-11-16 22:05:00 +08:00
- define more intervals where we will shift wakeup intervals around in, 1h, 6h, 24h, ...
2020-07-28 17:23:20 +08:00
- maybe support iouring as backend, so that we allow hooking read and write
operations instead of IO ready events into event loops. See considerations
here:
http://blog.vmsplice.net/2020/07/rethinking-event-loop-integration-for.html
2013-05-17 03:14:56 +08:00
2013-07-17 10:44:38 +08:00
* investigate endianness issues of UUID vs. GUID
2013-04-25 04:18:01 +08:00
2013-04-19 04:19:33 +08:00
* dbus: when a unit failed to load (i.e. is in UNIT_ERROR state), we
should be able to safely try another attempt when the bus call LoadUnit() is invoked.
2013-04-18 04:23:18 +08:00
* add a pam module that passes the hdd passphrase into the PAM stack and then expires it, for usage by gdm auto-login.
* add a pam module that on password changes updates any LUKS slot where the password matches
2013-04-23 08:39:40 +08:00
* test/:
2018-03-13 19:25:06 +08:00
- add unit tests for config_parse_device_allow()
2013-04-10 04:20:05 +08:00
2013-03-30 01:28:43 +08:00
* seems that when we follow symlinks to units we prefer the symlink
2014-05-04 01:15:23 +08:00
destination path over /etc and /usr. We should not do that. Instead
2013-03-30 01:28:43 +08:00
/etc should always override /run+/usr and also any symlink
destination.
2013-03-26 01:17:15 +08:00
* when isolating, try to figure out a way how we implicitly can order
all units we stop before the isolating unit...
2013-03-23 06:28:36 +08:00
* teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off})
2020-04-20 18:41:49 +08:00
* Add ConditionDirectoryNotEmpty= handle non-absoute paths as a search path or add
ConditionConfigSearchPathNotEmpty= or different syntax? See the discussion starting at
https://github.com/systemd/systemd/pull/15109#issuecomment-607740136.
2014-03-21 10:27:17 +08:00
* BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify
that the boot loader should be installed to the ESP. Define a way
how an installer can figure out whether a BLS compliant boot loader
is installed.
2013-03-12 00:49:33 +08:00
2013-03-07 20:39:57 +08:00
* think about requeuing jobs when daemon-reload is issued? usecase:
the initrd issues a reload after fstab from the host is accessible
and we might want to requeue the mounts local-fs acquired through
that automatically.
2013-04-02 05:04:11 +08:00
* systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep()
2013-03-01 02:55:48 +08:00
2016-04-22 10:57:06 +08:00
* remove any syslog support from log.c — we probably cannot do this before split-off udev is gone for good
2013-02-27 22:00:38 +08:00
2013-02-27 09:24:10 +08:00
* shutdown logging: store to EFI var, and store to USB stick?
2013-03-23 06:28:36 +08:00
* merge unit_kill_common() and unit_kill_context()
2012-12-19 22:27:27 +08:00
2013-01-26 04:11:59 +08:00
* EFI:
- honor language efi variables for default language selection (if there are any?)
- honor timezone efi variables for default timezone selection (if there are any?)
2013-07-19 05:07:37 +08:00
- change bootctl to be backed by systemd-bootd to control temporary and persistent default boot goal plus efi variables
2019-03-20 18:28:35 +08:00
* bootctl
- recognize the case when not booted on EFI
2012-11-21 04:33:49 +08:00
2013-01-28 05:59:01 +08:00
* maybe do not install getty@tty1.service symlink in /etc but in /usr?
2012-11-21 02:13:54 +08:00
2013-01-26 04:11:59 +08:00
* print a nicer explanation if people use variable/specifier expansion in ExecStart= for the first word
2012-11-19 06:32:09 +08:00
2013-01-26 04:11:59 +08:00
* mount: turn dependency information from /proc/self/mountinfo into dependency information between systemd units.
2012-11-16 08:36:29 +08:00
2013-01-26 04:11:59 +08:00
* logind:
- logind: optionally, ignore idle-hint logic for autosuspend, block suspend as long as a session is around
- logind: wakelock/opportunistic suspend support
- Add pretty name for seats in logind
- logind: allow showing logout dialog from system?
2013-11-29 01:42:00 +08:00
- add Suspend() bus calls which take timestamps to fix double suspend issues when somebody hits suspend and closes laptop quickly.
- if pam_systemd is invoked by su from a process that is outside of a
any session we should probably just become a NOP, since that's
usually not a real user session but just some system code that just
needs setuid().
2014-11-26 10:18:17 +08:00
- logind: make the Suspend()/Hibernate() bus calls wait for the for
the job to be completed. before returning, so that clients can wait
for "systemctl suspend" to finish to know when the suspending is
complete.
- logind: when the power button is pressed short, just popup a
logout dialog. If it is pressed for 1s, do the usual
shutdown. Inspiration are Macs here.
2020-12-14 08:40:45 +08:00
- expose "Locked" property on logind session objects
2015-11-16 22:05:00 +08:00
- maybe allow configuration of the StopTimeout for session scopes
- rename session scope so that it includes the UID. THat way
the session scope can be arranged freely in slices and we don't have
make assumptions about their slice anymore.
- follow PropertiesChanged state more closely, to deal with quick logouts and
relogins
2020-04-02 22:00:06 +08:00
- (optionally?) spawn seat-manager@$SEAT.service whenever a seat shows up that as CanGraphical set
2012-11-15 05:20:51 +08:00
2013-01-26 04:11:59 +08:00
* journal:
2014-11-05 00:54:40 +08:00
- consider introducing implicit _TTY= + _PPID= + _EUID= + _EGID= + _FSUID= + _FSGID= fields
2013-01-26 04:11:59 +08:00
- journald: also get thread ID from client, plus thread name
- journal: when waiting for journal additions in the client always sleep at least 1s or so, in order to minimize wakeups
- add API to close/reopen/get fd for journal client fd in libsystemd-journal.
2020-08-20 17:23:26 +08:00
- fall back to /dev/log based logging in libsystemd-journal, if we cannot log natively?
2013-01-26 04:11:59 +08:00
- declare the local journal protocol stable in the wiki interface chart
- sd-journal: speed up sd_journal_get_data() with transparent hash table in bg
- journald: when dropping msgs due to ratelimit make sure to write
"dropped %u messages" not only when we are about to print the next
2019-04-27 08:22:40 +08:00
message that works, but already after a short timeout
2013-01-26 04:11:59 +08:00
- check if we can make journalctl by default use --follow mode inside of less if called without args?
- maybe add API to send pairs of iovecs via sd_journal_send
2013-03-06 01:59:14 +08:00
- journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access
2013-01-26 04:11:59 +08:00
- journactl: support negative filtering, i.e. FOOBAR!="waldo",
and !FOOBAR for events without FOOBAR.
2020-07-19 16:22:21 +08:00
- journal: store timestamp of journal_file_set_offline() in the header,
2015-01-13 08:15:02 +08:00
so it is possible to display when the file was last synced.
2013-01-26 04:11:59 +08:00
- journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again.
- journal: find a way to allow dropping history early, based on priority, other rules
- journal: When used on NFS, check payload hashes
- journald: add kernel cmdline option to disable ratelimiting for debug purposes
- refuse taking lower-case variable names in sd_journal_send() and friends.
- journald: we currently rotate only after MaxUse+MaxFilesize has been reached.
- journal: deal nicely with byte-by-byte copied files, especially regards header
- journal: sanely deal with entries which are larger than the individual file size, but where the components would fit
2013-04-20 05:13:42 +08:00
- Replace utmp, wtmp, btmp, and lastlog completely with journal
2013-11-29 01:42:00 +08:00
- journalctl: instead --after-cursor= maybe have a --cursor=XYZ+1 syntax?
- when a kernel driver logs in a tight loop, we should ratelimit that too.
- journald: optionally, log debug messages to /run but everything else to /var
- journald: when we drop syslog messages because the syslog socket is
full, make sure to write how many messages are lost as first thing
to syslog when it works again.
2014-11-26 10:18:17 +08:00
- journald: allow per-priority and per-service retention times when rotating/vacuuming
- journald: make use of uid-range.h to managed uid ranges to split
journals in.
- journalctl: add the ability to look for the most recent process of a binary. journalctl /usr/bin/X11 --pid=-1 or so...
- improve journalctl performance by loading journal files
lazily. Encode just enough information in the file name, so that we
do not have to open it to know that it is not interesting for us, for
the most common operations.
2015-11-16 22:05:00 +08:00
- man: document that corrupted journal files is nothing to act on
- rework journald sigbus stuff to use mutex
- Set RLIMIT_NPROC for systemd-journal-xyz, and all other of our
services that run under their own user ids, and use User= (but only
in a world where userns is ubiquitous since otherwise we cannot
invoke those daemons on the host AND in a container anymore). Also,
if LimitNPROC= is used without User= we should warn and refuse
operation.
- journalctl --verify: don't show files that are currently being
written to as FAIL, but instead show that their are being written to.
- add journalctl -H that talks via ssh to a remote peer and passes through
binary logs data
- add a version of --merge which also merges /var/log/journal/remote
- journalctl: -m should access container journals directly by enumerating
them via machined, and also watch containers coming and going.
Benefit: nspawn --ephemeral would start working nicely with the journal.
- assign MESSAGE_ID to log messages about failed services
2020-07-19 16:22:21 +08:00
- check if loop in decompress_blob_xz() is necessary
2013-01-26 04:11:59 +08:00
2017-12-14 21:12:39 +08:00
* add a test if all entries in the catalog are properly formatted.
(Adding dashes in a catalog entry currently results in the catalog entry
being silently skipped. journalctl --update-catalog must warn about this,
and we should also have a unit test to check that all our message are OK.)
2013-01-26 04:11:59 +08:00
* document:
2013-12-26 11:53:09 +08:00
- document that deps in [Unit] sections ignore Alias= fields in
2013-01-26 04:11:59 +08:00
[Install] units of other units, unless those units are disabled
- man: clarify that time-sync.target is not only sysv compat but also useful otherwise. Same for similar targets
- document that service reload may be implemented as service reexec
2013-11-29 01:42:00 +08:00
- add a man page containing packaging guidelines and recommending usage of things like Documentation=, PrivateTmp=, PrivateNetwork= and ReadOnlyDirectories=/etc /usr.
- document systemd-journal-flush.service properly
- documentation: recommend to connect the timer units of a service to the service via Also= in [Install]
- man: document the very specific env the shutdown drop-in tools live in
2020-07-23 15:03:58 +08:00
- man: add more examples to man pages,
- in particular an example how to do the equivalent of switching runlevels
2013-11-29 01:42:00 +08:00
- man: maybe sort directives in man pages, and take sections from --help and apply them to man too
2018-12-20 23:09:48 +08:00
- document root=gpt-auto properly
2013-01-26 04:11:59 +08:00
* systemctl:
- add systemctl switch to dump transaction without executing it
- Add a verbose mode to "systemctl start" and friends that explains what is being done or not done
- "systemctl disable" on a static unit prints no message and does
nothing. "systemctl enable" does nothing, and gives a bad message
about it. Should fix both to print nice actionable messages.
- print nice message from systemctl --failed if there are no entries shown, and hook that into ExecStartPre of rescue.service/emergency.service
- add new command to systemctl: "systemctl system-reexec" which reexecs as many daemons as virtually possible
2014-05-04 01:15:23 +08:00
- systemctl enable: fail if target to alias into does not exist? maybe show how many units are enabled afterwards?
2013-01-26 04:11:59 +08:00
- systemctl: "Journal has been rotated since unit was started." message is misleading
2016-07-10 20:48:23 +08:00
- systemctl status output should include list of triggering units and their status
2013-11-29 01:42:00 +08:00
* unit install:
- "systemctl mask" should find all names by which a unit is accessible
(i.e. by scanning for symlinks to it) and link them all to /dev/null
2012-11-21 07:33:37 +08:00
2013-01-26 04:11:59 +08:00
* timer units:
- timer units should get the ability to trigger when:
o DST changes
2013-11-05 07:48:47 +08:00
- Modulate timer frequency based on battery state
2012-11-04 22:47:08 +08:00
2012-10-24 07:05:40 +08:00
* add libsystemd-password or so to query passwords during boot using the password agent logic
2012-10-15 22:28:04 +08:00
* clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed
2013-01-26 04:11:59 +08:00
* on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel
2012-10-03 23:37:06 +08:00
2016-11-24 08:51:36 +08:00
* make repeated alt-ctrl-del presses printing a dump
2012-08-04 03:49:06 +08:00
2012-10-03 01:11:26 +08:00
* hostnamed: before returning information from /etc/machine-info.conf check the modification data and reread. Similar for localed, ...
2014-05-04 01:15:23 +08:00
* currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not
2012-09-27 23:18:13 +08:00
2013-01-26 04:11:59 +08:00
* nspawn:
2015-11-16 22:05:00 +08:00
- emulate /dev/kmsg using CUSE and turn off the syslog syscall
with seccomp. That should provide us with a useful log buffer that
systemd can log to during early boot, and disconnect container logs
from the kernel's logs.
- as soon as networkd has a bus interface, hook up --network-interface=,
--network-bridge= with networkd, to trigger netdev creation should an
interface be missing
- a nice way to boot up without machine id set, so that it is set at boot
automatically for supporting --ephemeral. Maybe hash the host machine id
together with the machine name to generate the machine id for the container
- fix logic always print a final newline on output.
https://github.com/systemd/systemd/pull/272#issuecomment-113153176
- should optionally support receiving WATCHDOG=1 messages from its payload
PID 1...
- optionally automatically add FORWARD rules to iptables whenever nspawn is
running, remove them when shut down.
* machined:
- add an API so that libvirt-lxc can inform us about network interfaces being
removed or added to an existing machine
- "machinectl migrate" or similar to copy a container from or to a
difference host, via ssh
- introduce systemd-nspawn-ephemeral@.service, and hook it into
"machinectl start" with a new --ephemeral switch
- "machinectl status" should also show internal logs of the container in
question
- "machinectl history"
- "machinectl diff"
- "machinectl commit" that takes a writable snapshot of a tree, invokes a
shell in it, and marks it read-only after use
2013-01-26 04:11:59 +08:00
* cryptsetup:
- cryptsetup-generator: allow specification of passwords in crypttab itself
2013-04-30 06:57:29 +08:00
- support rd.luks.allow-discards= kernel cmdline params in cryptsetup generator
2012-09-22 02:52:23 +08:00
2012-09-15 02:02:52 +08:00
* hw watchdog: optionally try to use the preset watchdog timeout instead of always overriding it
2012-09-18 17:27:56 +08:00
https://bugs.freedesktop.org/show_bug.cgi?id=54712
2012-09-15 02:02:52 +08:00
2017-10-06 16:04:49 +08:00
* add a dependency on standard-conf.xml and other included files to man pages
2012-08-13 21:39:25 +08:00
* MountFlags=shared acts as MountFlags=slave right now.
2012-08-09 18:52:49 +08:00
2012-08-09 00:10:35 +08:00
* properly handle loop back mounts via fstab, especially regards to fsck/passno
2012-07-27 18:21:39 +08:00
* initialize the hostname from the fs label of /, if /etc/hostname does not exist?
2013-01-17 10:30:55 +08:00
* udev:
- move to LGPL
- kill scsi_id
- add trigger --subsystem-match=usb/usb_device device
2014-02-22 04:41:48 +08:00
- reimport udev db after MOVE events for devices without dev_t
2012-04-04 20:57:36 +08:00
2012-03-13 05:22:16 +08:00
* There's currently no way to cancel fsck (used to be possible via C-c or c on the console)
2012-02-21 02:56:14 +08:00
* add option to sockets to avoid activation. Instead just drop packets/connections, see http://cyberelk.net/tim/2012/02/15/portreserve-systemd-solution/
2015-11-16 22:05:00 +08:00
* coredump:
- save coredump in Windows/Mozilla minidump format
2016-09-27 18:40:54 +08:00
- when truncating coredumps, also log the full size that the process had, and make a metadata field so we can report truncated coredumps
2012-01-17 20:30:58 +08:00
* support crash reporting operation modes (https://live.gnome.org/GnomeOS/Design/Whiteboards/ProblemReporting)
2011-09-22 01:33:52 +08:00
* be able to specify a forced restart of service A where service B depends on, in case B
needs to be auto-respawned?
2013-11-29 01:42:00 +08:00
* tmpfiles:
- apply "x" on "D" too (see patch from William Douglas)
2015-01-19 07:28:17 +08:00
- instead of ignoring unknown fields, reject them.
2015-11-16 22:05:00 +08:00
- creating new directories/subvolumes/fifos/device nodes
should not follow symlinks. None of the other adjustment or creation
calls follow symlinks.
2021-03-01 01:08:53 +08:00
- add --test mode
2011-07-12 03:10:48 +08:00
2011-07-09 03:39:10 +08:00
* make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early
2011-05-20 07:57:20 +08:00
* verify that the AF_UNIX sockets of a service in the fs still exist
when we start a service in order to avoid confusion when a user
assumes starting a service is enough to make it accessible
2011-05-12 22:14:44 +08:00
* Make it possible to set the keymap independently from the font on
the kernel cmdline. Right now setting one resets also the other.
2011-07-29 11:01:47 +08:00
* and a dbus call to generate target from current state
2011-05-18 01:37:03 +08:00
2011-04-05 06:24:00 +08:00
* write blog stories about:
2012-10-23 00:23:08 +08:00
- hwdb: what belongs into it, lsusb
2011-04-05 06:24:00 +08:00
- enabling dbus services
2011-07-12 09:36:17 +08:00
- how to make changes to sysctl and sysfs attributes
2011-07-23 10:15:38 +08:00
- remote access
2011-07-28 02:47:50 +08:00
- how to pass throw-away units to systemd, or dynamically change properties of existing units
2012-05-24 23:04:04 +08:00
- testing with Harald's awesome test kit
2012-10-16 07:01:55 +08:00
- auto-restart
2012-10-26 09:51:10 +08:00
- how to develop against journal browsing APIs
2012-10-24 07:05:40 +08:00
- the journal HTTP iface
2012-10-25 07:20:18 +08:00
- non-cgroup resource management
2013-01-17 07:11:27 +08:00
- dynamic resource management with cgroups
2012-11-21 02:11:55 +08:00
- refreshed, longer missions statement
2013-02-27 09:24:10 +08:00
- calendar time events
- init=/bin/sh vs. "emergency" mode, vs. "rescue" mode, vs. "multi-user" mode, vs. "graphical" mode, and the debug shell
- how to create your own target
- instantiated apache, dovecot and so on
- hooking a script into various stages of shutdown/rearly booot
2011-04-19 12:06:41 +08:00
2011-07-02 07:44:49 +08:00
* investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support.
2010-09-29 03:49:26 +08:00
* dot output for --test showing the 'initial transaction'
2015-11-16 22:05:00 +08:00
* pid1:
- When logging about multiple units (stopping BoundTo units, conflicts, etc.),
log both units as UNIT=, so that journalctl -u triggers on both.
- generate better errors when people try to set transient properties
that are not supported...
http://lists.freedesktop.org/archives/systemd-devel/2015-February/028076.html
- maybe introduce WantsMountsFor=? Usecase:
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027729.html
- recreate systemd's D-Bus private socket file on SIGUSR2
- move PAM code into its own binary
- when we automatically restart a service, ensure we restart its rdeps, too.
- hide PAM options in fragment parser when compile time disabled
- Support --test based on current system state
- If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle().
- after deserializing sockets in socket.c we should reapply sockopts and things
- drop PID 1 reloading, only do reexecing (difficult: Reload()
currently is properly synchronous, Reexec() is weird, because we
cannot delay the response properly until we are back, so instead of
being properly synchronous we just keep open the fd and close it
when done. That means clients do not get a successful method reply,
but much rather a disconnect on success.
- when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr
- when a bus name of a service disappears from the bus make sure to queue further activation requests
* unit files:
- allow port=0 in .socket units
- maybe introduce ExecRestartPre=
- add ReloadSignal= for configuring a reload signal to use
- implement Register= switch in .socket units to enable registration
in Avahi, RPC and other socket registration services.
- allow Type=simple with PIDFile=
https://bugzilla.redhat.com/show_bug.cgi?id=723942
- allow writing multiple conditions in unit files on one line
- introduce Type=pid-file
- introduce mix of BindTo and Requisite
- add a concept of RemainAfterExit= to scope units
- Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely
2019-12-14 02:25:50 +08:00
- add verification of [Install] section to systemd-analyze verify
2015-11-16 22:05:00 +08:00
udev: add network link configuration tool
This tool applies hardware specific settings to network devices before they
are announced via libudev.
Settings that will probably eventually be supported are MTU, Speed,
DuplexMode, WakeOnLan, MACAddress, MACAddressPolicy (e.g., 'hardware',
'synthetic' or 'random'), Name and NamePolicy (replacing our current
interface naming logic). This patch only introduces support for
Description, as a proof of concept.
Some of these settings may later be overriden by a network management
daemon/script. However, these tools should always listen and wait on libudev
before touching a device (listening on netlink is not enough). This is no
different from how things used to be, as we always supported changing the
network interface name from udev rules, which does not work if someone
has already started using it.
The tool is configured by .link files in /etc/net/links/ (with the usual
overriding logic in /run and /lib). The first (in lexicographical order)
matching .link file is applied to a given device, and all others are ignored.
The .link files contain a [Match] section with (currently) the keys
MACAddress, Driver, Type (see DEVTYPE in udevadm info) and Path (this
matches on the stable device path as exposed as ID_PATH, and not the
unstable DEVPATH). A .link file matches a given device if all of the
specified keys do. Currently the keys are treated as plain strings,
but some limited globbing may later be added to the keys where it
makes sense.
Example:
/etc/net/links/50-wireless.link
[Match]
MACAddress=98:f2:e4:42:c6:92
Path=pci-0000:02:00.0-bcma-0
Type=wlan
[Link]
Description=The wireless link
2013-10-26 06:34:01 +08:00
* udev-link-config:
- Make sure ID_PATH is always exported and complete for
network devices where possible, so we can safely rely
on Path= matching
2013-11-28 06:15:04 +08:00
* sd-rtnl:
- add support for more attribute types
2014-03-31 17:30:59 +08:00
- inbuilt piping support (essentially degenerate async)? see loopback-setup.c and other places
2013-11-28 06:15:04 +08:00
2013-12-04 20:14:23 +08:00
* networkd:
2014-01-12 04:19:10 +08:00
- add more keys to [Route] and [Address] sections
- add support for more DHCPv4 options (and, longer term, other kinds of dynamic config)
2014-02-22 04:41:48 +08:00
- add reduced [Link] support to .network files
2014-04-28 05:45:42 +08:00
- properly handle routerless dhcp leases
2014-08-03 13:11:37 +08:00
- work with non-Ethernet devices
2015-11-16 22:05:00 +08:00
- dhcp: do we allow configuring dhcp routes on interfaces that are not the one we got the dhcp info from?
- the DHCP lease data (such as NTP/DNS) is still made available when
a carrier is lost on a link. It should be removed instantly.
- expose in the API the following bits:
2020-05-19 14:55:46 +08:00
- option 15, domain name
2020-04-14 16:37:40 +08:00
- option 12, hostname and/or option 81, fqdn
2015-11-16 22:05:00 +08:00
- option 123, 144, geolocation
- option 252, configure http proxy (PAC/wpad)
- provide a way to define a per-network interface default metric value
for all routes to it. possibly a second default for DHCP routes.
- allow Name= to be specified repeatedly in the [Match] section. Maybe also
support Name=foo*|bar*|baz ?
- whenever uplink info changes, make DHCP server send out FORCERENEW
2014-03-21 03:19:59 +08:00
networkd: unfoobar serialization of links
We'd start writing an entry line, then another one, then another one,
and then output the rest of the first one, and then some other random
stuff, and the rest of some other lines... Results were ...eh... random.
Let's define a helper to avoid some of the copy&paste madness, and separate
blocks that output a single line with /**********************************/.
This rework doesn't change what data is written, it only tries to fix the
format of the output. The fact that some entries only write data from
link->network, and some from either link->network or link, some stuff only
for dhpc4 leases while some for both dhpc4 and dhcp6, etc, looks rather
suspicious too, but I didn't touch this.
2020-05-25 04:02:47 +08:00
* Figure out how to do unittests of networkd's state serialization
2014-05-16 06:26:37 +08:00
* dhcp:
2014-05-21 22:46:14 +08:00
- figure out how much we can increase Maximum Message Size
2014-05-16 06:26:37 +08:00
2014-06-24 21:24:50 +08:00
* dhcp6:
- add functions to set previously stored IPv6 addresses on startup and get
them at shutdown; store them in client->ia_na
- write more test cases
- implement reconfigure support, see 5.3., 15.11. and 22.20.
- implement support for temporary adressess (IA_TA)
- implement dhcpv6 authentication
- investigate the usefulness of Confirm messages; i.e. are there any
situations where the link changes without any loss in carrier detection
or interface down
- some servers don't do rapid commit without a filled in IA_NA, verify
this behavior
2016-10-02 20:51:49 +08:00
- RouteTable= ?
2014-06-24 21:24:50 +08:00
2010-11-18 09:16:36 +08:00
External:
2010-11-18 03:22:07 +08:00
2011-08-02 05:16:20 +08:00
* dbus:
2011-08-29 19:44:12 +08:00
- natively watch for dbus-*.service symlinks (PENDING)
2013-01-26 04:11:59 +08:00
- teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
2011-08-02 05:16:20 +08:00
2010-11-18 03:22:07 +08:00
* make cryptsetup lower --iter-time
2011-07-29 11:01:47 +08:00
* kernel: add device_type = "fb", "fbcon" to class "graphics"
2010-07-14 21:13:34 +08:00
2013-04-30 06:48:03 +08:00
* /usr/bin/service should actually show the new command line
2013-05-04 04:43:11 +08:00
* fedora: suggest auto-restart on failure, but not on success and not on coredump. also, ask people to think about changing the start limit logic. Also point people to RestartPreventExitStatus=, SuccessExitStatus=
2013-04-30 06:48:03 +08:00
* neither pkexec nor sudo initialize environ[] from the PAM environment?
2013-02-13 08:58:00 +08:00
2013-05-04 00:58:44 +08:00
* fedora: update policy to declare access mode and ownership of unit files to root:root 0644, and add an rpmlint check for it
2013-05-03 20:19:19 +08:00
2014-04-12 08:57:27 +08:00
* register catalog database signature as file magic
2014-10-28 10:34:28 +08:00
* zsh shell completion:
- <command> <verb> -<TAB> should complete options, but currently does not
2014-12-10 08:10:01 +08:00
- systemctl add-wants,add-requires
2014-10-28 10:34:28 +08:00
2019-09-05 19:41:08 +08:00
* systemctl status should know about 'systemd-analyze calendar ... --iterations='
* If timer has just OnInactiveSec=..., it should fire after a specified time
after being started.
2014-07-22 09:11:56 +08:00
2010-05-16 07:49:45 +08:00
Regularly:
2010-02-15 05:45:08 +08:00
2010-05-16 07:49:45 +08:00
* look for close() vs. close_nointr() vs. close_nointr_nofail()
2010-02-15 05:47:08 +08:00
2010-05-16 07:49:45 +08:00
* check for strerror(r) instead of strerror(-r)
2010-06-17 03:54:17 +08:00
2010-08-12 05:19:28 +08:00
* pahole
2014-05-04 01:15:23 +08:00
* set_put(), hashmap_put() return values check. i.e. == 0 does not free()!
2012-06-22 22:18:47 +08:00
2012-09-17 06:21:25 +08:00
* use secure_getenv() instead of getenv() where appropriate
2012-08-24 00:47:01 +08:00
2013-01-07 02:52:38 +08:00
* link up selected blog stories from man pages and unit files Documentation= fields
2019-01-28 01:04:22 +08:00
String is not UTF-8 clean, ignoring assignment
