mirrors/systemd
0
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-11-27 20:23:36 +08:00
Code Issues Packages Projects Releases Wiki Activity
2962a50850
systemd/man/systemd-sleep.conf.xml

243 lines
10 KiB
XML
Raw Normal View History

man: drop mode line in file headers This is already included in .dir-locals, so we don't need it in the files themselves.
2018-07-03 05:15:39 +08:00
<?xml version='1.0'?>
man: use same header for all files The "include" files had type "book" for some raeason. I don't think this is meaningful. Let's just use the same everywhere. $ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
2019-03-14 21:40:58 +08:00
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
license: LGPL-2.1+ -> LGPL-2.1-or-later
2020-11-09 12:23:58 +08:00
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
systemd-sleep: Support sleep.conf.d directories in the usual search paths
2014-11-29 17:06:28 +08:00
<refentry id="systemd-sleep.conf"
xmlns:xi="http://www.w3.org/2001/XInclude">
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
<refentryinfo>
<title>systemd-sleep.conf</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>systemd-sleep.conf</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>systemd-sleep.conf</refname>
systemd-sleep: Support sleep.conf.d directories in the usual search paths
2014-11-29 17:06:28 +08:00
<refname>sleep.conf.d</refname>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
<refpurpose>Suspend and hibernation configuration file</refpurpose>
</refnamediv>
<refsynopsisdiv>
man: use <simplelist> for file lists in synopsis With <para><filename>…</filename></para>, we get a separate "paragraph" for each line, i.e. entries separated by empty lines. This uses up a lot of space and was only done because docbook makes it hard to insert a newline. In some other places, <literallayout> was used, but then we cannot indent the source text (because the whitespace would end up in the final page). We can get the desired result with <simplelist>. With <simplelist> the items are indented in roff output, but not in html output. In some places this looks better then no indentation, and in others it would probably be better to have no indent. But this is a minor issue and we cannot control that. (I didn't convert all spots. There's a bunch of other man pages which have two lines, e.g. an executable and service file, and it doesn't matter there so much.)
2023-12-14 19:52:03 +08:00
<para><simplelist>
<member><filename>/etc/systemd/sleep.conf</filename></member>
<member><filename>/etc/systemd/sleep.conf.d/*.conf</filename></member>
<member><filename>/run/systemd/sleep.conf.d/*.conf</filename></member>
<member><filename>/usr/lib/systemd/sleep.conf.d/*.conf</filename></member>
</simplelist></para>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</refsynopsisdiv>
<refsect1>
<title>Description</title>
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
<para><command>systemd</command> supports four general
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
power-saving modes:</para>
<variablelist>
<varlistentry>
<term>suspend</term>
<listitem><para>a low-power state
where execution of the OS is paused,
and complete power loss might result
in lost data, and which is fast to
enter and exit. This corresponds to
suspend, standby, or freeze states as
understood by the kernel.
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
</para>
<xi:include href="version-info.xml" xpointer="v203"/></listitem>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</varlistentry>
<varlistentry>
<term>hibernate</term>
<listitem><para>a low-power state
where execution of the OS is paused,
and complete power loss does not
result in lost data, and which might
be slow to enter and exit. This
corresponds to the hibernation as
understood by the kernel.
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
</para>
<xi:include href="version-info.xml" xpointer="v203"/></listitem>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</varlistentry>
<varlistentry>
<term>hybrid-sleep</term>
<listitem><para>a low-power state
where execution of the OS is paused,
which might be slow to enter, and on
complete power loss does not result in
lost data but might be slower to exit
in that case. This mode is called
suspend-to-both by the kernel.
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
</para>
<xi:include href="version-info.xml" xpointer="v203"/></listitem>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</varlistentry>
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
<varlistentry>
Rename suspend-to-hibernate to suspend-then-hibernate Per some discussion with Gnome folks, they would prefer this name as it's more descriptive of what's happening.
2018-03-29 00:00:06 +08:00
<term>suspend-then-hibernate</term>
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
sleep: introduce SuspendEstimationSec= Before v252, HibernateDelaySec= specifies the maximum timespan that the system in suspend state, and the system hibernate after the timespan. However, after 96d662fa4c8cab24da57523c5e49e6ef3967fc13, the setting is repurposed as the default interval to measure battery charge level and estimate the battery discharging late. And if the system has enough battery capacity, then the system will stay in suspend state and not hibernate even if the time passed. See issue #25269. To keep the backward compatibility, let's introduce another setting SuspendEstimationSec= for controlling the interval to measure battery charge level, and make HibernateDelaySec= work as of v251. This also drops implementation details from the man page. Fixes #25269.
2022-11-14 01:08:05 +08:00
<listitem>
<para>A low power state where the system is initially suspended (the state is stored in
RAM). If the system supports low-battery alarms (ACPI _BTP), then the system will be woken up by
the ACPI low-battery signal and hibernated (the state is then stored on disk). Also, if not
interrupted within the timespan specified by <varname>HibernateDelaySec=</varname> or the estimated
timespan until the system battery charge level goes down to 5%, then the system will be woken up by the
RTC alarm and hibernated. The estimated timespan is calculated from the change of the battery
capacity level after the time specified by <varname>SuspendEstimationSec=</varname> or when
the system is woken up from the suspend.</para>
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
<xi:include href="version-info.xml" xpointer="v239"/>
sleep: introduce SuspendEstimationSec= Before v252, HibernateDelaySec= specifies the maximum timespan that the system in suspend state, and the system hibernate after the timespan. However, after 96d662fa4c8cab24da57523c5e49e6ef3967fc13, the setting is repurposed as the default interval to measure battery charge level and estimate the battery discharging late. And if the system has enough battery capacity, then the system will stay in suspend state and not hibernate even if the time passed. See issue #25269. To keep the backward compatibility, let's introduce another setting SuspendEstimationSec= for controlling the interval to measure battery charge level, and make HibernateDelaySec= work as of v251. This also drops implementation details from the man page. Fixes #25269.
2022-11-14 01:08:05 +08:00
</listitem>
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
</varlistentry>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</variablelist>
systemd-sleep: Support sleep.conf.d directories in the usual search paths
2014-11-29 17:06:28 +08:00
<para>Settings in these files determine what strings
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
will be written to
<filename>/sys/power/disk</filename> and
<filename>/sys/power/state</filename> by
<citerefentry><refentrytitle>systemd-sleep</refentrytitle><manvolnum>8</manvolnum></citerefentry>
when
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
man: add a new page with a general description of common syntax We have a common parser, but for the user it might be completely unobvious that the same general rules apply to all those files. Let's add a page about the basic syntax so that the more specific pages don't have to repeat those details.
2018-04-16 23:09:58 +08:00
attempts to suspend or hibernate the machine.
See
man: fix some manvolnum
2020-07-11 06:05:23 +08:00
<citerefentry><refentrytitle>systemd.syntax</refentrytitle><manvolnum>7</manvolnum></citerefentry>
man: add a new page with a general description of common syntax We have a common parser, but for the user it might be completely unobvious that the same general rules apply to all those files. Let's add a page about the basic syntax so that the more specific pages don't have to repeat those details.
2018-04-16 23:09:58 +08:00
for a general description of the syntax.</para>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</refsect1>
Do not advertise .d snippets over main config file For daemons which have a main configuration file, there's little reason for the administrator to use configuration snippets. They are useful for packagers which need to override settings, but we shouldn't advertise that as the main way of configuring those services. https://bugs.freedesktop.org/show_bug.cgi?id=89397
2015-03-04 08:10:21 +08:00
<xi:include href="standard-conf.xml" xpointer="main-conf" />
systemd-sleep: Support sleep.conf.d directories in the usual search paths
2014-11-29 17:06:28 +08:00
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
<refsect1>
<title>Options</title>
<para>The following options can be configured in the
tree-wide: drop quotes from around [section] For users, the square brackets already serve as markup and clearly delineate the section name from surrounding text. Putting additional markup around that only adds clutter. Also, we were very inconsistent in using the quotes. Let's just drop them altogether.
2020-07-06 17:00:06 +08:00
[Sleep] section of
man: revert dynamic paths for split-usr setups This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-06-19 01:47:44 +08:00
<filename>/etc/systemd/sleep.conf</filename> or a
systemd-sleep: Support sleep.conf.d directories in the usual search paths
2014-11-29 17:06:28 +08:00
<filename>sleep.conf.d</filename> file:</para>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
man: move all config file options to one section We had "SYSTEM MANAGER DIRECTIVES" which was a misnomer already, because it also listed user manager stuff. Let's make this a more general section and move the items for other services there too (from "MISCELANENOUS").
2019-02-13 17:49:47 +08:00
<variablelist class='config-directives'>
shared/sleep-config: add switches to kill specific sleep modes /etc/systemd/sleep.conf gains four new switches: AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=, AllowHybridSleep=. Disabling specific modes was already possible by masking suspend.target, hibernate.target, suspend-then-hibernate.target, or hybrid-sleep.target. But this is not convenient for distributions, which want to set some defaults based on what they want to support. Having those available as configuration makes it easy to put a config file in /usr/lib/systemd/sleep.conf.d/ that overrides the defaults and gives instructions how to undo that override.
2018-09-26 17:17:36 +08:00
<varlistentry>
<term><varname>AllowSuspend=</varname></term>
<term><varname>AllowHibernation=</varname></term>
<term><varname>AllowHybridSleep=</varname></term>
sleep-config: remove HibernateState= & HybridSleepState=, restrict SuspendState= not to include "disk" I don't know why these existed in the first place, but as I justified in the comments, it's simply not sensible to allow HibernateState= or HybridSleepState= to take values other than 'disk'. So let's just remove those options. Also, SuspendState= should not contain 'disk'.
2023-10-21 00:21:20 +08:00
<term><varname>AllowSuspendThenHibernate=</varname></term>
shared/sleep-config: add switches to kill specific sleep modes /etc/systemd/sleep.conf gains four new switches: AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=, AllowHybridSleep=. Disabling specific modes was already possible by masking suspend.target, hibernate.target, suspend-then-hibernate.target, or hybrid-sleep.target. But this is not convenient for distributions, which want to set some defaults based on what they want to support. Having those available as configuration makes it easy to put a config file in /usr/lib/systemd/sleep.conf.d/ that overrides the defaults and gives instructions how to undo that override.
2018-09-26 17:17:36 +08:00
<listitem><para>By default any power-saving mode is advertised if possible (i.e.
the kernel supports that mode, the necessary resources are available). Those
switches can be used to disable specific modes.</para>
<para>If <varname>AllowHibernation=no</varname> or <varname>AllowSuspend=no</varname> is
used, this implies <varname>AllowSuspendThenHibernate=no</varname> and
<varname>AllowHybridSleep=no</varname>, since those methods use both suspend and hibernation
internally. <varname>AllowSuspendThenHibernate=yes</varname> and
<varname>AllowHybridSleep=yes</varname> can be used to override and enable those specific
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
modes.</para>
<xi:include href="version-info.xml" xpointer="v240"/></listitem>
shared/sleep-config: add switches to kill specific sleep modes /etc/systemd/sleep.conf gains four new switches: AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=, AllowHybridSleep=. Disabling specific modes was already possible by masking suspend.target, hibernate.target, suspend-then-hibernate.target, or hybrid-sleep.target. But this is not convenient for distributions, which want to set some defaults based on what they want to support. Having those available as configuration makes it easy to put a config file in /usr/lib/systemd/sleep.conf.d/ that overrides the defaults and gives instructions how to undo that override.
2018-09-26 17:17:36 +08:00
</varlistentry>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
<varlistentry>
<term><varname>HibernateMode=</varname></term>
sleep-config: make hybrid sleep always use 'suspend' disk mode If user requests hybrid sleep, we should always use 'suspend' disk mode. If that's not supported, let's correctly report it so they can choose plain hibernation instead. HybridSleepMode= serves no purpose in this case and should be removed. Addresses https://github.com/systemd/systemd/pull/29681#discussion_r1369812785
2023-10-24 18:10:21 +08:00
<listitem><para>The string to be written to <filename>/sys/power/disk</filename> by <citerefentry>
<refentrytitle>systemd-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
man: explain allowed values for /sys/power/{disk,state} Also fix the grammar: "neither" can only be used with two values, and here we have an inderminate number >= 1. Fixes #26460.
2023-05-17 17:12:32 +08:00
More than one value can be specified by separating multiple values with whitespace. They will be
tried in turn, until one is written without error. If none of the writes succeed, the operation will
be aborted.</para>
<para>The allowed set of values is determined by the kernel and is shown in the file itself (use
man: use meaningful titles for <ulink>s As pointed out in https://github.com/systemd/systemd/issues/29814, we need to use phrases are are meaningful on their own, because the man page formatter creates a list at the bottom. With <ulink>see docs</ulink>, we end up with: NOTES: 1. see docs https://some.url/page 2. see docs https://some.url/page2 which is not very useful :( Also, the text inside the tag should not include punctuation. Python helper: from xml_helper import xml_parse for p in glob.glob('../man/*.xml'): t = xml_parse(p) ulinks = t.iterfind('.//ulink') for ulink in ulinks: if ulink.text is None: continue text = ' '.join(ulink.text.split()) print(f'{p}: {text}')
2023-11-06 19:43:40 +08:00
<command>cat /sys/power/disk</command> to display). See the kernel documentation page
<ulink url="https://www.kernel.org/doc/html/latest/admin-guide/pm/sleep-states.html#basic-sysfs-interfaces-for-system-suspend-and-hibernation">
Basic sysfs Interfaces for System Suspend and Hibernation</ulink> for more details.</para>
man: explain allowed values for /sys/power/{disk,state} Also fix the grammar: "neither" can only be used with two values, and here we have an inderminate number >= 1. Fixes #26460.
2023-05-17 17:12:32 +08:00
<para>
<citerefentry><refentrytitle>systemd-suspend-then-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
man: drop obsolete reference to SuspendMode= Follow-up for 1f82c21dce
2023-11-04 05:33:52 +08:00
uses the value of <varname>HibernateMode=</varname> when hibernating.</para>
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
<xi:include href="version-info.xml" xpointer="v203"/></listitem>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</varlistentry>
<varlistentry>
<term><varname>SuspendState=</varname></term>
sleep-config: remove HibernateState= & HybridSleepState=, restrict SuspendState= not to include "disk" I don't know why these existed in the first place, but as I justified in the comments, it's simply not sensible to allow HibernateState= or HybridSleepState= to take values other than 'disk'. So let's just remove those options. Also, SuspendState= should not contain 'disk'.
2023-10-21 00:21:20 +08:00
<listitem><para>The string to be written to <filename>/sys/power/state</filename> by <citerefentry>
<refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
man: explain allowed values for /sys/power/{disk,state} Also fix the grammar: "neither" can only be used with two values, and here we have an inderminate number >= 1. Fixes #26460.
2023-05-17 17:12:32 +08:00
More than one value can be specified by separating multiple values with whitespace. They will be
tried in turn, until one is written without error. If none of the writes succeed, the operation will
sleep-config: remove HibernateState= & HybridSleepState=, restrict SuspendState= not to include "disk" I don't know why these existed in the first place, but as I justified in the comments, it's simply not sensible to allow HibernateState= or HybridSleepState= to take values other than 'disk'. So let's just remove those options. Also, SuspendState= should not contain 'disk'.
2023-10-21 00:21:20 +08:00
be aborted.</para>
man: fix systemd-sleep.conf.xml whitespace Follow-up for 33f899bd479534b0a920ce427cdf06739028f5ab
2021-07-07 17:32:35 +08:00
man: explain allowed values for /sys/power/{disk,state} Also fix the grammar: "neither" can only be used with two values, and here we have an inderminate number >= 1. Fixes #26460.
2023-05-17 17:12:32 +08:00
<para>The allowed set of values is determined by the kernel and is shown in the file itself (use
<command>cat /sys/power/state</command> to display). See <ulink
man: use meaningful titles for <ulink>s As pointed out in https://github.com/systemd/systemd/issues/29814, we need to use phrases are are meaningful on their own, because the man page formatter creates a list at the bottom. With <ulink>see docs</ulink>, we end up with: NOTES: 1. see docs https://some.url/page 2. see docs https://some.url/page2 which is not very useful :( Also, the text inside the tag should not include punctuation. Python helper: from xml_helper import xml_parse for p in glob.glob('../man/*.xml'): t = xml_parse(p) ulinks = t.iterfind('.//ulink') for ulink in ulinks: if ulink.text is None: continue text = ' '.join(ulink.text.split()) print(f'{p}: {text}')
2023-11-06 19:43:40 +08:00
url="https://www.kernel.org/doc/html/latest/admin-guide/pm/sleep-states.html#basic-sysfs-interfaces-for-system-suspend-and-hibernation">
Basic sysfs Interfaces for System Suspend and Hibernation</ulink> for more details.</para>
man: explain allowed values for /sys/power/{disk,state} Also fix the grammar: "neither" can only be used with two values, and here we have an inderminate number >= 1. Fixes #26460.
2023-05-17 17:12:32 +08:00
<para>
<citerefentry><refentrytitle>systemd-suspend-then-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
sleep-config: remove HibernateState= & HybridSleepState=, restrict SuspendState= not to include "disk" I don't know why these existed in the first place, but as I justified in the comments, it's simply not sensible to allow HibernateState= or HybridSleepState= to take values other than 'disk'. So let's just remove those options. Also, SuspendState= should not contain 'disk'.
2023-10-21 00:21:20 +08:00
uses this value when suspending.</para>
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
<xi:include href="version-info.xml" xpointer="v203"/></listitem>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</varlistentry>
sleep: introduce SuspendEstimationSec= Before v252, HibernateDelaySec= specifies the maximum timespan that the system in suspend state, and the system hibernate after the timespan. However, after 96d662fa4c8cab24da57523c5e49e6ef3967fc13, the setting is repurposed as the default interval to measure battery charge level and estimate the battery discharging late. And if the system has enough battery capacity, then the system will stay in suspend state and not hibernate even if the time passed. See issue #25269. To keep the backward compatibility, let's introduce another setting SuspendEstimationSec= for controlling the interval to measure battery charge level, and make HibernateDelaySec= work as of v251. This also drops implementation details from the man page. Fixes #25269.
2022-11-14 01:08:05 +08:00
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
<varlistentry>
<term><varname>HibernateDelaySec=</varname></term>
sleep: introduce SuspendEstimationSec= Before v252, HibernateDelaySec= specifies the maximum timespan that the system in suspend state, and the system hibernate after the timespan. However, after 96d662fa4c8cab24da57523c5e49e6ef3967fc13, the setting is repurposed as the default interval to measure battery charge level and estimate the battery discharging late. And if the system has enough battery capacity, then the system will stay in suspend state and not hibernate even if the time passed. See issue #25269. To keep the backward compatibility, let's introduce another setting SuspendEstimationSec= for controlling the interval to measure battery charge level, and make HibernateDelaySec= work as of v251. This also drops implementation details from the man page. Fixes #25269.
2022-11-14 01:08:05 +08:00
<listitem>
<para>The amount of time the system spends in suspend mode before the system is
automatically put into hibernate mode. Only used by
<citerefentry><refentrytitle>systemd-suspend-then-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
If the system has a battery, then defaults to the estimated timespan until the system battery charge level goes down to 5%.
If the system has no battery, then defaults to 2h.</para>
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
<xi:include href="version-info.xml" xpointer="v239"/>
sleep: introduce SuspendEstimationSec= Before v252, HibernateDelaySec= specifies the maximum timespan that the system in suspend state, and the system hibernate after the timespan. However, after 96d662fa4c8cab24da57523c5e49e6ef3967fc13, the setting is repurposed as the default interval to measure battery charge level and estimate the battery discharging late. And if the system has enough battery capacity, then the system will stay in suspend state and not hibernate even if the time passed. See issue #25269. To keep the backward compatibility, let's introduce another setting SuspendEstimationSec= for controlling the interval to measure battery charge level, and make HibernateDelaySec= work as of v251. This also drops implementation details from the man page. Fixes #25269.
2022-11-14 01:08:05 +08:00
</listitem>
</varlistentry>
<varlistentry>
<term><varname>SuspendEstimationSec=</varname></term>
<listitem>
<para>The RTC alarm will wake the system after the specified timespan to measure the system battery
capacity level and estimate battery discharging rate, which is used for estimating timespan until the system battery charge
level goes down to 5%. Only used by
<citerefentry><refentrytitle>systemd-suspend-then-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
man: add version info This tries to add information about when each option was added. It goes back to version 183. The version info is included from a separate file to allow generating it, which would allow more control on the formatting of the final output.
2023-08-23 00:52:36 +08:00
Defaults to 1h.</para>
<xi:include href="version-info.xml" xpointer="v253"/></listitem>
Introduce suspend-to-hibernate (#8274) Suspend to Hibernate is a new sleep method that invokes suspend for a predefined period of time before automatically waking up and hibernating the system. It's similar to HybridSleep however there isn't a performance impact on every suspend cycle. It's intended to use with systems that may have a higher power drain in their supported suspend states to prevent battery and data loss over an extended suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
2018-03-08 21:17:33 +08:00
</varlistentry>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</variablelist>
</refsect1>
<refsect1>
<title>Example: freeze</title>
<para>Example: to exploit the <quote>freeze</quote> mode added
in Linux 3.9, one can use <command>systemctl suspend</command>
with
man: always place <programlisting> and </programlisting> in a line with actual sources, so that we don't get spurious newlines in the man page output
2014-02-14 22:56:19 +08:00
<programlisting>[Sleep]
SuspendState=freeze</programlisting></para>
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd-sleep</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-hybrid-sleep.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
Rename suspend-to-hibernate to suspend-then-hibernate Per some discussion with Gnome folks, they would prefer this name as it's more descriptive of what's happening.
2018-03-29 00:00:06 +08:00
<citerefentry><refentrytitle>systemd-suspend-then-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
systemd-sleep: add support for freeze and standby A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-05 00:31:28 +08:00
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>
Reference in New Issue Copy Permalink