qemu/target-arm/kvm.c
Christoffer Dall 1da41cc1c6 arm: vgic device control api support
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.

Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API).  If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time.  If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00

433 lines
10 KiB
C

/*
* ARM implementation of KVM hooks
*
* Copyright Christoffer Dall 2009-2010
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include <stdio.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <linux/kvm.h>
#include "qemu-common.h"
#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#include "cpu.h"
#include "hw/arm/arm.h"
const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
};
bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
int *fdarray,
struct kvm_vcpu_init *init)
{
int ret, kvmfd = -1, vmfd = -1, cpufd = -1;
kvmfd = qemu_open("/dev/kvm", O_RDWR);
if (kvmfd < 0) {
goto err;
}
vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
if (vmfd < 0) {
goto err;
}
cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0);
if (cpufd < 0) {
goto err;
}
ret = ioctl(vmfd, KVM_ARM_PREFERRED_TARGET, init);
if (ret >= 0) {
ret = ioctl(cpufd, KVM_ARM_VCPU_INIT, init);
if (ret < 0) {
goto err;
}
} else {
/* Old kernel which doesn't know about the
* PREFERRED_TARGET ioctl: we know it will only support
* creating one kind of guest CPU which is its preferred
* CPU type.
*/
while (*cpus_to_try != QEMU_KVM_ARM_TARGET_NONE) {
init->target = *cpus_to_try++;
memset(init->features, 0, sizeof(init->features));
ret = ioctl(cpufd, KVM_ARM_VCPU_INIT, init);
if (ret >= 0) {
break;
}
}
if (ret < 0) {
goto err;
}
}
fdarray[0] = kvmfd;
fdarray[1] = vmfd;
fdarray[2] = cpufd;
return true;
err:
if (cpufd >= 0) {
close(cpufd);
}
if (vmfd >= 0) {
close(vmfd);
}
if (kvmfd >= 0) {
close(kvmfd);
}
return false;
}
void kvm_arm_destroy_scratch_host_vcpu(int *fdarray)
{
int i;
for (i = 2; i >= 0; i--) {
close(fdarray[i]);
}
}
static void kvm_arm_host_cpu_class_init(ObjectClass *oc, void *data)
{
ARMHostCPUClass *ahcc = ARM_HOST_CPU_CLASS(oc);
/* All we really need to set up for the 'host' CPU
* is the feature bits -- we rely on the fact that the
* various ID register values in ARMCPU are only used for
* TCG CPUs.
*/
if (!kvm_arm_get_host_cpu_features(ahcc)) {
fprintf(stderr, "Failed to retrieve host CPU features!\n");
abort();
}
}
static void kvm_arm_host_cpu_initfn(Object *obj)
{
ARMHostCPUClass *ahcc = ARM_HOST_CPU_GET_CLASS(obj);
ARMCPU *cpu = ARM_CPU(obj);
CPUARMState *env = &cpu->env;
cpu->kvm_target = ahcc->target;
cpu->dtb_compatible = ahcc->dtb_compatible;
env->features = ahcc->features;
}
static const TypeInfo host_arm_cpu_type_info = {
.name = TYPE_ARM_HOST_CPU,
#ifdef TARGET_AARCH64
.parent = TYPE_AARCH64_CPU,
#else
.parent = TYPE_ARM_CPU,
#endif
.instance_init = kvm_arm_host_cpu_initfn,
.class_init = kvm_arm_host_cpu_class_init,
.class_size = sizeof(ARMHostCPUClass),
};
int kvm_arch_init(KVMState *s)
{
/* For ARM interrupt delivery is always asynchronous,
* whether we are using an in-kernel VGIC or not.
*/
kvm_async_interrupts_allowed = true;
type_register_static(&host_arm_cpu_type_info);
return 0;
}
unsigned long kvm_arch_vcpu_id(CPUState *cpu)
{
return cpu->cpu_index;
}
/* We track all the KVM devices which need their memory addresses
* passing to the kernel in a list of these structures.
* When board init is complete we run through the list and
* tell the kernel the base addresses of the memory regions.
* We use a MemoryListener to track mapping and unmapping of
* the regions during board creation, so the board models don't
* need to do anything special for the KVM case.
*/
typedef struct KVMDevice {
struct kvm_arm_device_addr kda;
struct kvm_device_attr kdattr;
MemoryRegion *mr;
QSLIST_ENTRY(KVMDevice) entries;
int dev_fd;
} KVMDevice;
static QSLIST_HEAD(kvm_devices_head, KVMDevice) kvm_devices_head;
static void kvm_arm_devlistener_add(MemoryListener *listener,
MemoryRegionSection *section)
{
KVMDevice *kd;
QSLIST_FOREACH(kd, &kvm_devices_head, entries) {
if (section->mr == kd->mr) {
kd->kda.addr = section->offset_within_address_space;
}
}
}
static void kvm_arm_devlistener_del(MemoryListener *listener,
MemoryRegionSection *section)
{
KVMDevice *kd;
QSLIST_FOREACH(kd, &kvm_devices_head, entries) {
if (section->mr == kd->mr) {
kd->kda.addr = -1;
}
}
}
static MemoryListener devlistener = {
.region_add = kvm_arm_devlistener_add,
.region_del = kvm_arm_devlistener_del,
};
static void kvm_arm_set_device_addr(KVMDevice *kd)
{
struct kvm_device_attr *attr = &kd->kdattr;
int ret;
/* If the device control API is available and we have a device fd on the
* KVMDevice struct, let's use the newer API
*/
if (kd->dev_fd >= 0) {
uint64_t addr = kd->kda.addr;
attr->addr = (uintptr_t)&addr;
ret = kvm_device_ioctl(kd->dev_fd, KVM_SET_DEVICE_ATTR, attr);
} else {
ret = kvm_vm_ioctl(kvm_state, KVM_ARM_SET_DEVICE_ADDR, &kd->kda);
}
if (ret < 0) {
fprintf(stderr, "Failed to set device address: %s\n",
strerror(-ret));
abort();
}
}
static void kvm_arm_machine_init_done(Notifier *notifier, void *data)
{
KVMDevice *kd, *tkd;
memory_listener_unregister(&devlistener);
QSLIST_FOREACH_SAFE(kd, &kvm_devices_head, entries, tkd) {
if (kd->kda.addr != -1) {
kvm_arm_set_device_addr(kd);
}
memory_region_unref(kd->mr);
g_free(kd);
}
}
static Notifier notify = {
.notify = kvm_arm_machine_init_done,
};
void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group,
uint64_t attr, int dev_fd)
{
KVMDevice *kd;
if (!kvm_irqchip_in_kernel()) {
return;
}
if (QSLIST_EMPTY(&kvm_devices_head)) {
memory_listener_register(&devlistener, NULL);
qemu_add_machine_init_done_notifier(&notify);
}
kd = g_new0(KVMDevice, 1);
kd->mr = mr;
kd->kda.id = devid;
kd->kda.addr = -1;
kd->kdattr.flags = 0;
kd->kdattr.group = group;
kd->kdattr.attr = attr;
kd->dev_fd = dev_fd;
QSLIST_INSERT_HEAD(&kvm_devices_head, kd, entries);
memory_region_ref(kd->mr);
}
bool write_kvmstate_to_list(ARMCPU *cpu)
{
CPUState *cs = CPU(cpu);
int i;
bool ok = true;
for (i = 0; i < cpu->cpreg_array_len; i++) {
struct kvm_one_reg r;
uint64_t regidx = cpu->cpreg_indexes[i];
uint32_t v32;
int ret;
r.id = regidx;
switch (regidx & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U32:
r.addr = (uintptr_t)&v32;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
if (!ret) {
cpu->cpreg_values[i] = v32;
}
break;
case KVM_REG_SIZE_U64:
r.addr = (uintptr_t)(cpu->cpreg_values + i);
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
break;
default:
abort();
}
if (ret) {
ok = false;
}
}
return ok;
}
bool write_list_to_kvmstate(ARMCPU *cpu)
{
CPUState *cs = CPU(cpu);
int i;
bool ok = true;
for (i = 0; i < cpu->cpreg_array_len; i++) {
struct kvm_one_reg r;
uint64_t regidx = cpu->cpreg_indexes[i];
uint32_t v32;
int ret;
r.id = regidx;
switch (regidx & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U32:
v32 = cpu->cpreg_values[i];
r.addr = (uintptr_t)&v32;
break;
case KVM_REG_SIZE_U64:
r.addr = (uintptr_t)(cpu->cpreg_values + i);
break;
default:
abort();
}
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
if (ret) {
/* We might fail for "unknown register" and also for
* "you tried to set a register which is constant with
* a different value from what it actually contains".
*/
ok = false;
}
}
return ok;
}
void kvm_arch_pre_run(CPUState *cs, struct kvm_run *run)
{
}
void kvm_arch_post_run(CPUState *cs, struct kvm_run *run)
{
}
int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
{
return 0;
}
bool kvm_arch_stop_on_emulation_error(CPUState *cs)
{
return true;
}
int kvm_arch_process_async_events(CPUState *cs)
{
return 0;
}
int kvm_arch_on_sigbus_vcpu(CPUState *cs, int code, void *addr)
{
return 1;
}
int kvm_arch_on_sigbus(int code, void *addr)
{
return 1;
}
void kvm_arch_update_guest_debug(CPUState *cs, struct kvm_guest_debug *dbg)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
}
int kvm_arch_insert_sw_breakpoint(CPUState *cs,
struct kvm_sw_breakpoint *bp)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
return -EINVAL;
}
int kvm_arch_insert_hw_breakpoint(target_ulong addr,
target_ulong len, int type)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
return -EINVAL;
}
int kvm_arch_remove_hw_breakpoint(target_ulong addr,
target_ulong len, int type)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
return -EINVAL;
}
int kvm_arch_remove_sw_breakpoint(CPUState *cs,
struct kvm_sw_breakpoint *bp)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
return -EINVAL;
}
void kvm_arch_remove_all_hw_breakpoints(void)
{
qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
}
void kvm_arch_init_irq_routing(KVMState *s)
{
}
int kvm_arch_irqchip_create(KVMState *s)
{
int ret;
/* If we can create the VGIC using the newer device control API, we
* let the device do this when it initializes itself, otherwise we
* fall back to the old API */
ret = kvm_create_device(s, KVM_DEV_TYPE_ARM_VGIC_V2, true);
if (ret == 0) {
return 1;
}
return 0;
}