mirror of
https://github.com/qemu/qemu.git
synced 2024-12-12 13:13:51 +08:00
78abf93cc7
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
659 lines
24 KiB
C
659 lines
24 KiB
C
/*
|
|
* QEMU PowerPC CHRP (currently NewWorld PowerMac) hardware System Emulator
|
|
*
|
|
* Copyright (c) 2004-2007 Fabrice Bellard
|
|
* Copyright (c) 2007 Jocelyn Mayer
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
* PCI bus layout on a real G5 (U3 based):
|
|
*
|
|
* 0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3 AGP [106b:004b]
|
|
* 0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon 9600] [1002:4150]
|
|
* 0001:00:00.0 Host bridge [0600]: Apple Computer Inc. CPC945 HT Bridge [106b:004a]
|
|
* 0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12)
|
|
* 0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12)
|
|
* 0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045]
|
|
* 0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046]
|
|
* 0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047]
|
|
* 0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048]
|
|
* 0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049]
|
|
* 0001:01:07.0 Class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 20)
|
|
* 0001:01:08.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040]
|
|
* 0001:01:09.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040]
|
|
* 0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
|
|
* 0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
|
|
* 0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
|
|
* 0001:03:0d.0 Class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043]
|
|
* 0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042]
|
|
* 0001:04:0f.0 Ethernet controller [0200]: Apple Computer Inc. K2 GMAC (Sun GEM) [106b:004c]
|
|
* 0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240]
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/datadir.h"
|
|
#include "qemu/units.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/ppc/ppc.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "hw/nvram/mac_nvram.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/pci-host/uninorth.h"
|
|
#include "hw/input/adb.h"
|
|
#include "hw/ppc/mac_dbdma.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "net/net.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/nvram/fw_cfg.h"
|
|
#include "hw/char/escc.h"
|
|
#include "hw/misc/macio/macio.h"
|
|
#include "hw/ppc/openpic.h"
|
|
#include "hw/loader.h"
|
|
#include "hw/fw-path-provider.h"
|
|
#include "elf.h"
|
|
#include "qemu/error-report.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/reset.h"
|
|
#include "kvm_ppc.h"
|
|
#include "hw/usb.h"
|
|
#include "hw/sysbus.h"
|
|
#include "trace.h"
|
|
|
|
#define MAX_IDE_BUS 2
|
|
#define CFG_ADDR 0xf0000510
|
|
#define TBFREQ (25UL * 1000UL * 1000UL)
|
|
#define CLOCKFREQ (900UL * 1000UL * 1000UL)
|
|
#define BUSFREQ (100UL * 1000UL * 1000UL)
|
|
|
|
#define NDRV_VGA_FILENAME "qemu_vga.ndrv"
|
|
|
|
#define PROM_FILENAME "openbios-ppc"
|
|
#define PROM_BASE 0xfff00000
|
|
#define PROM_SIZE (1 * MiB)
|
|
|
|
#define KERNEL_LOAD_ADDR 0x01000000
|
|
#define KERNEL_GAP 0x00100000
|
|
|
|
#define TYPE_CORE99_MACHINE MACHINE_TYPE_NAME("mac99")
|
|
typedef struct Core99MachineState Core99MachineState;
|
|
DECLARE_INSTANCE_CHECKER(Core99MachineState, CORE99_MACHINE,
|
|
TYPE_CORE99_MACHINE)
|
|
|
|
typedef enum {
|
|
CORE99_VIA_CONFIG_CUDA = 0,
|
|
CORE99_VIA_CONFIG_PMU,
|
|
CORE99_VIA_CONFIG_PMU_ADB
|
|
} Core99ViaConfig;
|
|
|
|
struct Core99MachineState {
|
|
/*< private >*/
|
|
MachineState parent;
|
|
|
|
Core99ViaConfig via_config;
|
|
};
|
|
|
|
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
|
|
Error **errp)
|
|
{
|
|
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
|
|
}
|
|
|
|
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
|
|
{
|
|
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
|
|
}
|
|
|
|
static void ppc_core99_reset(void *opaque)
|
|
{
|
|
PowerPCCPU *cpu = opaque;
|
|
|
|
cpu_reset(CPU(cpu));
|
|
/* 970 CPUs want to get their initial IP as part of their boot protocol */
|
|
cpu->env.nip = PROM_BASE + 0x100;
|
|
}
|
|
|
|
/* PowerPC Mac99 hardware initialisation */
|
|
static void ppc_core99_init(MachineState *machine)
|
|
{
|
|
Core99MachineState *core99_machine = CORE99_MACHINE(machine);
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
PowerPCCPU *cpu = NULL;
|
|
CPUPPCState *env = NULL;
|
|
char *filename;
|
|
IrqLines *openpic_irqs;
|
|
int i, j, k, ppc_boot_device, machine_arch, bios_size = -1;
|
|
const char *bios_name = machine->firmware ?: PROM_FILENAME;
|
|
MemoryRegion *bios = g_new(MemoryRegion, 1);
|
|
hwaddr kernel_base = 0, initrd_base = 0, cmdline_base = 0;
|
|
long kernel_size = 0, initrd_size = 0;
|
|
PCIBus *pci_bus;
|
|
bool has_pmu, has_adb;
|
|
Object *macio;
|
|
MACIOIDEState *macio_ide;
|
|
BusState *adb_bus;
|
|
MacIONVRAMState *nvr;
|
|
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
|
|
void *fw_cfg;
|
|
SysBusDevice *s;
|
|
DeviceState *dev, *pic_dev, *uninorth_pci_dev;
|
|
DeviceState *uninorth_internal_dev = NULL, *uninorth_agp_dev = NULL;
|
|
hwaddr nvram_addr = 0xFFF04000;
|
|
uint64_t tbfreq = kvm_enabled() ? kvmppc_get_tbfreq() : TBFREQ;
|
|
|
|
/* init CPUs */
|
|
for (i = 0; i < machine->smp.cpus; i++) {
|
|
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
|
|
env = &cpu->env;
|
|
|
|
/* Set time-base frequency to 100 Mhz */
|
|
cpu_ppc_tb_init(env, TBFREQ);
|
|
qemu_register_reset(ppc_core99_reset, cpu);
|
|
}
|
|
|
|
/* allocate RAM */
|
|
if (machine->ram_size > 2 * GiB) {
|
|
error_report("RAM size more than 2 GiB is not supported");
|
|
exit(1);
|
|
}
|
|
memory_region_add_subregion(get_system_memory(), 0, machine->ram);
|
|
|
|
/* allocate and load firmware ROM */
|
|
memory_region_init_rom(bios, NULL, "ppc_core99.bios", PROM_SIZE,
|
|
&error_fatal);
|
|
memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
|
|
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
|
|
if (filename) {
|
|
/* Load OpenBIOS (ELF) */
|
|
bios_size = load_elf(filename, NULL, NULL, NULL, NULL,
|
|
NULL, NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
|
|
|
|
if (bios_size <= 0) {
|
|
/* or load binary ROM image */
|
|
bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE);
|
|
}
|
|
g_free(filename);
|
|
}
|
|
if (bios_size < 0 || bios_size > PROM_SIZE) {
|
|
error_report("could not load PowerPC bios '%s'", bios_name);
|
|
exit(1);
|
|
}
|
|
|
|
if (machine->kernel_filename) {
|
|
int bswap_needed = 0;
|
|
|
|
#ifdef BSWAP_NEEDED
|
|
bswap_needed = 1;
|
|
#endif
|
|
kernel_base = KERNEL_LOAD_ADDR;
|
|
kernel_size = load_elf(machine->kernel_filename, NULL,
|
|
translate_kernel_address, NULL, NULL, NULL,
|
|
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_aout(machine->kernel_filename, kernel_base,
|
|
machine->ram_size - kernel_base,
|
|
bswap_needed, TARGET_PAGE_SIZE);
|
|
}
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_image_targphys(machine->kernel_filename,
|
|
kernel_base,
|
|
machine->ram_size - kernel_base);
|
|
}
|
|
if (kernel_size < 0) {
|
|
error_report("could not load kernel '%s'",
|
|
machine->kernel_filename);
|
|
exit(1);
|
|
}
|
|
/* load initrd */
|
|
if (machine->initrd_filename) {
|
|
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
|
|
initrd_size = load_image_targphys(machine->initrd_filename,
|
|
initrd_base,
|
|
machine->ram_size - initrd_base);
|
|
if (initrd_size < 0) {
|
|
error_report("could not load initial ram disk '%s'",
|
|
machine->initrd_filename);
|
|
exit(1);
|
|
}
|
|
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
|
|
} else {
|
|
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
|
|
}
|
|
ppc_boot_device = 'm';
|
|
} else {
|
|
ppc_boot_device = '\0';
|
|
/* We consider that NewWorld PowerMac never have any floppy drive
|
|
* For now, OHW cannot boot from the network.
|
|
*/
|
|
for (i = 0; machine->boot_config.order[i] != '\0'; i++) {
|
|
if (machine->boot_config.order[i] >= 'c' &&
|
|
machine->boot_config.order[i] <= 'f') {
|
|
ppc_boot_device = machine->boot_config.order[i];
|
|
break;
|
|
}
|
|
}
|
|
if (ppc_boot_device == '\0') {
|
|
error_report("No valid boot device for Mac99 machine");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
openpic_irqs = g_new0(IrqLines, machine->smp.cpus);
|
|
dev = DEVICE(cpu);
|
|
for (i = 0; i < machine->smp.cpus; i++) {
|
|
/* Mac99 IRQ connection between OpenPIC outputs pins
|
|
* and PowerPC input pins
|
|
*/
|
|
switch (PPC_INPUT(env)) {
|
|
case PPC_FLAGS_INPUT_6xx:
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_INT] =
|
|
qdev_get_gpio_in(dev, PPC6xx_INPUT_INT);
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_CINT] =
|
|
qdev_get_gpio_in(dev, PPC6xx_INPUT_INT);
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_MCK] =
|
|
qdev_get_gpio_in(dev, PPC6xx_INPUT_MCP);
|
|
/* Not connected ? */
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_DEBUG] = NULL;
|
|
/* Check this */
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_RESET] =
|
|
qdev_get_gpio_in(dev, PPC6xx_INPUT_HRESET);
|
|
break;
|
|
#if defined(TARGET_PPC64)
|
|
case PPC_FLAGS_INPUT_970:
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_INT] =
|
|
qdev_get_gpio_in(dev, PPC970_INPUT_INT);
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_CINT] =
|
|
qdev_get_gpio_in(dev, PPC970_INPUT_INT);
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_MCK] =
|
|
qdev_get_gpio_in(dev, PPC970_INPUT_MCP);
|
|
/* Not connected ? */
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_DEBUG] = NULL;
|
|
/* Check this */
|
|
openpic_irqs[i].irq[OPENPIC_OUTPUT_RESET] =
|
|
qdev_get_gpio_in(dev, PPC970_INPUT_HRESET);
|
|
break;
|
|
#endif /* defined(TARGET_PPC64) */
|
|
default:
|
|
error_report("Bus model not supported on mac99 machine");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* UniN init */
|
|
s = SYS_BUS_DEVICE(qdev_new(TYPE_UNI_NORTH));
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
memory_region_add_subregion(get_system_memory(), 0xf8000000,
|
|
sysbus_mmio_get_region(s, 0));
|
|
|
|
if (PPC_INPUT(env) == PPC_FLAGS_INPUT_970) {
|
|
machine_arch = ARCH_MAC99_U3;
|
|
/* 970 gets a U3 bus */
|
|
/* Uninorth AGP bus */
|
|
uninorth_pci_dev = qdev_new(TYPE_U3_AGP_HOST_BRIDGE);
|
|
s = SYS_BUS_DEVICE(uninorth_pci_dev);
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
sysbus_mmio_map(s, 0, 0xf0800000);
|
|
sysbus_mmio_map(s, 1, 0xf0c00000);
|
|
/* PCI hole */
|
|
memory_region_add_subregion(get_system_memory(), 0x80000000,
|
|
sysbus_mmio_get_region(s, 2));
|
|
/* Register 8 MB of ISA IO space */
|
|
memory_region_add_subregion(get_system_memory(), 0xf2000000,
|
|
sysbus_mmio_get_region(s, 3));
|
|
} else {
|
|
machine_arch = ARCH_MAC99;
|
|
/* Use values found on a real PowerMac */
|
|
/* Uninorth AGP bus */
|
|
uninorth_agp_dev = qdev_new(TYPE_UNI_NORTH_AGP_HOST_BRIDGE);
|
|
s = SYS_BUS_DEVICE(uninorth_agp_dev);
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
sysbus_mmio_map(s, 0, 0xf0800000);
|
|
sysbus_mmio_map(s, 1, 0xf0c00000);
|
|
|
|
/* Uninorth internal bus */
|
|
uninorth_internal_dev = qdev_new(
|
|
TYPE_UNI_NORTH_INTERNAL_PCI_HOST_BRIDGE);
|
|
s = SYS_BUS_DEVICE(uninorth_internal_dev);
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
sysbus_mmio_map(s, 0, 0xf4800000);
|
|
sysbus_mmio_map(s, 1, 0xf4c00000);
|
|
|
|
/* Uninorth main bus - this must be last to make it the default */
|
|
uninorth_pci_dev = qdev_new(TYPE_UNI_NORTH_PCI_HOST_BRIDGE);
|
|
qdev_prop_set_uint32(uninorth_pci_dev, "ofw-addr", 0xf2000000);
|
|
s = SYS_BUS_DEVICE(uninorth_pci_dev);
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
sysbus_mmio_map(s, 0, 0xf2800000);
|
|
sysbus_mmio_map(s, 1, 0xf2c00000);
|
|
/* PCI hole */
|
|
memory_region_add_subregion(get_system_memory(), 0x80000000,
|
|
sysbus_mmio_get_region(s, 2));
|
|
/* Register 8 MB of ISA IO space */
|
|
memory_region_add_subregion(get_system_memory(), 0xf2000000,
|
|
sysbus_mmio_get_region(s, 3));
|
|
}
|
|
|
|
machine->usb |= defaults_enabled() && !machine->usb_disabled;
|
|
has_pmu = (core99_machine->via_config != CORE99_VIA_CONFIG_CUDA);
|
|
has_adb = (core99_machine->via_config == CORE99_VIA_CONFIG_CUDA ||
|
|
core99_machine->via_config == CORE99_VIA_CONFIG_PMU_ADB);
|
|
|
|
/* init basic PC hardware */
|
|
pci_bus = PCI_HOST_BRIDGE(uninorth_pci_dev)->bus;
|
|
|
|
/* MacIO */
|
|
macio = OBJECT(pci_new(-1, TYPE_NEWWORLD_MACIO));
|
|
dev = DEVICE(macio);
|
|
qdev_prop_set_uint64(dev, "frequency", tbfreq);
|
|
qdev_prop_set_bit(dev, "has-pmu", has_pmu);
|
|
qdev_prop_set_bit(dev, "has-adb", has_adb);
|
|
|
|
dev = DEVICE(object_resolve_path_component(macio, "escc"));
|
|
qdev_prop_set_chr(dev, "chrA", serial_hd(0));
|
|
qdev_prop_set_chr(dev, "chrB", serial_hd(1));
|
|
|
|
pci_realize_and_unref(PCI_DEVICE(macio), pci_bus, &error_fatal);
|
|
|
|
pic_dev = DEVICE(object_resolve_path_component(macio, "pic"));
|
|
for (i = 0; i < 4; i++) {
|
|
qdev_connect_gpio_out(uninorth_pci_dev, i,
|
|
qdev_get_gpio_in(pic_dev, 0x1b + i));
|
|
}
|
|
|
|
/* TODO: additional PCI buses only wired up for 32-bit machines */
|
|
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_970) {
|
|
/* Uninorth AGP bus */
|
|
for (i = 0; i < 4; i++) {
|
|
qdev_connect_gpio_out(uninorth_agp_dev, i,
|
|
qdev_get_gpio_in(pic_dev, 0x1b + i));
|
|
}
|
|
|
|
/* Uninorth internal bus */
|
|
for (i = 0; i < 4; i++) {
|
|
qdev_connect_gpio_out(uninorth_internal_dev, i,
|
|
qdev_get_gpio_in(pic_dev, 0x1b + i));
|
|
}
|
|
}
|
|
|
|
/* OpenPIC */
|
|
s = SYS_BUS_DEVICE(pic_dev);
|
|
k = 0;
|
|
for (i = 0; i < machine->smp.cpus; i++) {
|
|
for (j = 0; j < OPENPIC_OUTPUT_NB; j++) {
|
|
sysbus_connect_irq(s, k++, openpic_irqs[i].irq[j]);
|
|
}
|
|
}
|
|
g_free(openpic_irqs);
|
|
|
|
/* We only emulate 2 out of 3 IDE controllers for now */
|
|
ide_drive_get(hd, ARRAY_SIZE(hd));
|
|
|
|
macio_ide = MACIO_IDE(object_resolve_path_component(macio, "ide[0]"));
|
|
macio_ide_init_drives(macio_ide, hd);
|
|
|
|
macio_ide = MACIO_IDE(object_resolve_path_component(macio, "ide[1]"));
|
|
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
|
|
|
|
if (has_adb) {
|
|
if (has_pmu) {
|
|
dev = DEVICE(object_resolve_path_component(macio, "pmu"));
|
|
} else {
|
|
dev = DEVICE(object_resolve_path_component(macio, "cuda"));
|
|
}
|
|
|
|
adb_bus = qdev_get_child_bus(dev, "adb.0");
|
|
dev = qdev_new(TYPE_ADB_KEYBOARD);
|
|
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
|
|
|
|
dev = qdev_new(TYPE_ADB_MOUSE);
|
|
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
|
|
}
|
|
|
|
if (machine->usb) {
|
|
pci_create_simple(pci_bus, -1, "pci-ohci");
|
|
|
|
/* U3 needs to use USB for input because Linux doesn't support via-cuda
|
|
on PPC64 */
|
|
if (!has_adb || machine_arch == ARCH_MAC99_U3) {
|
|
USBBus *usb_bus;
|
|
|
|
usb_bus = USB_BUS(object_resolve_type_unambiguous(TYPE_USB_BUS,
|
|
&error_abort));
|
|
usb_create_simple(usb_bus, "usb-kbd");
|
|
usb_create_simple(usb_bus, "usb-mouse");
|
|
}
|
|
}
|
|
|
|
pci_vga_init(pci_bus);
|
|
|
|
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8) {
|
|
graphic_depth = 15;
|
|
}
|
|
|
|
pci_init_nic_devices(pci_bus, mc->default_nic);
|
|
|
|
/* The NewWorld NVRAM is not located in the MacIO device */
|
|
if (kvm_enabled() && qemu_real_host_page_size() > 4096) {
|
|
/* We can't combine read-write and read-only in a single page, so
|
|
move the NVRAM out of ROM again for KVM */
|
|
nvram_addr = 0xFFE00000;
|
|
}
|
|
dev = qdev_new(TYPE_MACIO_NVRAM);
|
|
qdev_prop_set_uint32(dev, "size", MACIO_NVRAM_SIZE);
|
|
qdev_prop_set_uint32(dev, "it_shift", 1);
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, nvram_addr);
|
|
nvr = MACIO_NVRAM(dev);
|
|
pmac_format_nvram_partition(nvr, MACIO_NVRAM_SIZE);
|
|
/* No PCI init: the BIOS will do it */
|
|
|
|
dev = qdev_new(TYPE_FW_CFG_MEM);
|
|
fw_cfg = FW_CFG(dev);
|
|
qdev_prop_set_uint32(dev, "data_width", 1);
|
|
qdev_prop_set_bit(dev, "dma_enabled", false);
|
|
object_property_add_child(OBJECT(machine), TYPE_FW_CFG, OBJECT(fw_cfg));
|
|
s = SYS_BUS_DEVICE(dev);
|
|
sysbus_realize_and_unref(s, &error_fatal);
|
|
sysbus_mmio_map(s, 0, CFG_ADDR);
|
|
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
|
|
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)machine->smp.cpus);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)machine->smp.max_cpus);
|
|
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, machine_arch);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
|
|
if (machine->kernel_cmdline) {
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
|
|
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
|
|
machine->kernel_cmdline);
|
|
} else {
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
|
|
}
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
|
|
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
|
|
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_VIACONFIG, core99_machine->via_config);
|
|
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
|
|
if (kvm_enabled()) {
|
|
uint8_t *hypercall;
|
|
|
|
hypercall = g_malloc(16);
|
|
kvmppc_get_hypercall(env, hypercall, 16);
|
|
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
|
|
}
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
|
|
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_NVRAM_ADDR, nvram_addr);
|
|
|
|
/* MacOS NDRV VGA driver */
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
|
|
if (filename) {
|
|
gchar *ndrv_file;
|
|
gsize ndrv_size;
|
|
|
|
if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) {
|
|
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
|
|
}
|
|
g_free(filename);
|
|
}
|
|
|
|
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
|
|
}
|
|
|
|
/*
|
|
* Implementation of an interface to adjust firmware path
|
|
* for the bootindex property handling.
|
|
*/
|
|
static char *core99_fw_dev_path(FWPathProvider *p, BusState *bus,
|
|
DeviceState *dev)
|
|
{
|
|
PCIDevice *pci;
|
|
MACIOIDEState *macio_ide;
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-newworld")) {
|
|
pci = PCI_DEVICE(dev);
|
|
return g_strdup_printf("mac-io@%x", PCI_SLOT(pci->devfn));
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-ide")) {
|
|
macio_ide = MACIO_IDE(dev);
|
|
return g_strdup_printf("ata-3@%x", macio_ide->addr);
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-hd")) {
|
|
return g_strdup("disk");
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-cd")) {
|
|
return g_strdup("cdrom");
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "virtio-blk-device")) {
|
|
return g_strdup("disk");
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
static int core99_kvm_type(MachineState *machine, const char *arg)
|
|
{
|
|
/* Always force PR KVM */
|
|
return 2;
|
|
}
|
|
|
|
static void core99_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
|
|
|
|
mc->desc = "Mac99 based PowerMAC";
|
|
mc->init = ppc_core99_init;
|
|
mc->block_default_type = IF_IDE;
|
|
/* SMP is not supported currently */
|
|
mc->max_cpus = 1;
|
|
mc->default_boot_order = "cd";
|
|
mc->default_display = "std";
|
|
mc->default_nic = "sungem";
|
|
mc->kvm_type = core99_kvm_type;
|
|
#ifdef TARGET_PPC64
|
|
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("970fx_v3.1");
|
|
#else
|
|
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("7400_v2.9");
|
|
#endif
|
|
mc->default_ram_id = "ppc_core99.ram";
|
|
mc->ignore_boot_device_suffixes = true;
|
|
fwc->get_dev_path = core99_fw_dev_path;
|
|
}
|
|
|
|
static char *core99_get_via_config(Object *obj, Error **errp)
|
|
{
|
|
Core99MachineState *cms = CORE99_MACHINE(obj);
|
|
|
|
switch (cms->via_config) {
|
|
default:
|
|
case CORE99_VIA_CONFIG_CUDA:
|
|
return g_strdup("cuda");
|
|
|
|
case CORE99_VIA_CONFIG_PMU:
|
|
return g_strdup("pmu");
|
|
|
|
case CORE99_VIA_CONFIG_PMU_ADB:
|
|
return g_strdup("pmu-adb");
|
|
}
|
|
}
|
|
|
|
static void core99_set_via_config(Object *obj, const char *value, Error **errp)
|
|
{
|
|
Core99MachineState *cms = CORE99_MACHINE(obj);
|
|
|
|
if (!strcmp(value, "cuda")) {
|
|
cms->via_config = CORE99_VIA_CONFIG_CUDA;
|
|
} else if (!strcmp(value, "pmu")) {
|
|
cms->via_config = CORE99_VIA_CONFIG_PMU;
|
|
} else if (!strcmp(value, "pmu-adb")) {
|
|
cms->via_config = CORE99_VIA_CONFIG_PMU_ADB;
|
|
} else {
|
|
error_setg(errp, "Invalid via value");
|
|
error_append_hint(errp, "Valid values are cuda, pmu, pmu-adb.\n");
|
|
}
|
|
}
|
|
|
|
static void core99_instance_init(Object *obj)
|
|
{
|
|
Core99MachineState *cms = CORE99_MACHINE(obj);
|
|
|
|
/* Default via_config is CORE99_VIA_CONFIG_CUDA */
|
|
cms->via_config = CORE99_VIA_CONFIG_CUDA;
|
|
object_property_add_str(obj, "via", core99_get_via_config,
|
|
core99_set_via_config);
|
|
object_property_set_description(obj, "via",
|
|
"Set VIA configuration. "
|
|
"Valid values are cuda, pmu and pmu-adb");
|
|
|
|
return;
|
|
}
|
|
|
|
static const TypeInfo core99_machine_info = {
|
|
.name = MACHINE_TYPE_NAME("mac99"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = core99_machine_class_init,
|
|
.instance_init = core99_instance_init,
|
|
.instance_size = sizeof(Core99MachineState),
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_FW_PATH_PROVIDER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
static void mac_machine_register_types(void)
|
|
{
|
|
type_register_static(&core99_machine_info);
|
|
}
|
|
|
|
type_init(mac_machine_register_types)
|