mirrors/qemu
0
0
Fork 0
mirror of https://github.com/qemu/qemu.git synced 2024-11-29 14:53:35 +08:00
Code Issues Packages Projects Releases Wiki Activity
e0eeb4a21a
qemu/hw/arm/fsl-imx6.c
Jean-Christophe Dubois 66542f6399 i.MX: split the GPT timer implementation into per SOC definitions 
In various Freescale SOCs, the GPT timers can be configured to select
its input clock.

Depending on the SOC the set of available input clocks may vary.

The actual single GPT definition was no good enough and because of it
booting the sabrelite board with a i.MX6DL device tree would fail
because of an incorrect input clock definition for the i.MX6DL SOC.

This patch fixes the i.MX6DL boot failure by adding the ability to
define a different set of input clocks depending on the considered SOC.

A different class has been defined for i.MX25, i.MX31 and i.MX6 each with
its specific set of input clocks.

The patch has been tested by booting KZM, i.MX25 PDK, i.MX6Q sabrelite
and i.MX6DL sabrelite.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 1467325619-8374-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed spacing round '/' operator]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-07 13:47:01 +01:00

467 lines
16 KiB
C
Raw Blame History

/*
* Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
*
* i.MX6 SOC emulation.
*
* Based on hw/arm/fsl-imx31.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "hw/arm/fsl-imx6.h"
#include "sysemu/sysemu.h"
#include "sysemu/char.h"
#include "qemu/error-report.h"
#define NAME_SIZE 20
static void fsl_imx6_init(Object *obj)
{
FslIMX6State *s = FSL_IMX6(obj);
char name[NAME_SIZE];
int i;
if (smp_cpus > FSL_IMX6_NUM_CPUS) {
error_report("%s: Only %d CPUs are supported (%d requested)",
TYPE_FSL_IMX6, FSL_IMX6_NUM_CPUS, smp_cpus);
exit(1);
}
for (i = 0; i < smp_cpus; i++) {
object_initialize(&s->cpu[i], sizeof(s->cpu[i]),
"cortex-a9-" TYPE_ARM_CPU);
snprintf(name, NAME_SIZE, "cpu%d", i);
object_property_add_child(obj, name, OBJECT(&s->cpu[i]), NULL);
}
object_initialize(&s->a9mpcore, sizeof(s->a9mpcore), TYPE_A9MPCORE_PRIV);
qdev_set_parent_bus(DEVICE(&s->a9mpcore), sysbus_get_default());
object_property_add_child(obj, "a9mpcore", OBJECT(&s->a9mpcore), NULL);
object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX6_CCM);
qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default());
object_property_add_child(obj, "ccm", OBJECT(&s->ccm), NULL);
object_initialize(&s->src, sizeof(s->src), TYPE_IMX6_SRC);
qdev_set_parent_bus(DEVICE(&s->src), sysbus_get_default());
object_property_add_child(obj, "src", OBJECT(&s->src), NULL);
for (i = 0; i < FSL_IMX6_NUM_UARTS; i++) {
object_initialize(&s->uart[i], sizeof(s->uart[i]), TYPE_IMX_SERIAL);
qdev_set_parent_bus(DEVICE(&s->uart[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "uart%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->uart[i]), NULL);
}
object_initialize(&s->gpt, sizeof(s->gpt), TYPE_IMX6_GPT);
qdev_set_parent_bus(DEVICE(&s->gpt), sysbus_get_default());
object_property_add_child(obj, "gpt", OBJECT(&s->gpt), NULL);
for (i = 0; i < FSL_IMX6_NUM_EPITS; i++) {
object_initialize(&s->epit[i], sizeof(s->epit[i]), TYPE_IMX_EPIT);
qdev_set_parent_bus(DEVICE(&s->epit[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "epit%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->epit[i]), NULL);
}
for (i = 0; i < FSL_IMX6_NUM_I2CS; i++) {
object_initialize(&s->i2c[i], sizeof(s->i2c[i]), TYPE_IMX_I2C);
qdev_set_parent_bus(DEVICE(&s->i2c[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "i2c%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->i2c[i]), NULL);
}
for (i = 0; i < FSL_IMX6_NUM_GPIOS; i++) {
object_initialize(&s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO);
qdev_set_parent_bus(DEVICE(&s->gpio[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "gpio%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->gpio[i]), NULL);
}
for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) {
object_initialize(&s->esdhc[i], sizeof(s->esdhc[i]), TYPE_SYSBUS_SDHCI);
qdev_set_parent_bus(DEVICE(&s->esdhc[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "sdhc%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->esdhc[i]), NULL);
}
for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) {
object_initialize(&s->spi[i], sizeof(s->spi[i]), TYPE_IMX_SPI);
qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default());
snprintf(name, NAME_SIZE, "spi%d", i + 1);
object_property_add_child(obj, name, OBJECT(&s->spi[i]), NULL);
}
object_initialize(&s->eth, sizeof(s->eth), TYPE_IMX_ENET);
qdev_set_parent_bus(DEVICE(&s->eth), sysbus_get_default());
object_property_add_child(obj, "eth", OBJECT(&s->eth), NULL);
}
static void fsl_imx6_realize(DeviceState *dev, Error **errp)
{
FslIMX6State *s = FSL_IMX6(dev);
uint16_t i;
Error *err = NULL;
for (i = 0; i < smp_cpus; i++) {
/* On uniprocessor, the CBAR is set to 0 */
if (smp_cpus > 1) {
object_property_set_int(OBJECT(&s->cpu[i]), FSL_IMX6_A9MPCORE_ADDR,
"reset-cbar", &error_abort);
}
/* All CPU but CPU 0 start in power off mode */
if (i) {
object_property_set_bool(OBJECT(&s->cpu[i]), true,
"start-powered-off", &error_abort);
}
object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
}
object_property_set_int(OBJECT(&s->a9mpcore), smp_cpus, "num-cpu",
&error_abort);
object_property_set_int(OBJECT(&s->a9mpcore),
FSL_IMX6_MAX_IRQ + GIC_INTERNAL, "num-irq",
&error_abort);
object_property_set_bool(OBJECT(&s->a9mpcore), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, FSL_IMX6_A9MPCORE_ADDR);
for (i = 0; i < smp_cpus; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i,
qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i + smp_cpus,
qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ));
}
object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6_CCM_ADDR);
object_property_set_bool(OBJECT(&s->src), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6_SRC_ADDR);
/* Initialize all UARTs */
for (i = 0; i < FSL_IMX6_NUM_UARTS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} serial_table[FSL_IMX6_NUM_UARTS] = {
{ FSL_IMX6_UART1_ADDR, FSL_IMX6_UART1_IRQ },
{ FSL_IMX6_UART2_ADDR, FSL_IMX6_UART2_IRQ },
{ FSL_IMX6_UART3_ADDR, FSL_IMX6_UART3_IRQ },
{ FSL_IMX6_UART4_ADDR, FSL_IMX6_UART4_IRQ },
{ FSL_IMX6_UART5_ADDR, FSL_IMX6_UART5_IRQ },
};
if (i < MAX_SERIAL_PORTS) {
CharDriverState *chr;
chr = serial_hds[i];
if (!chr) {
char *label = g_strdup_printf("imx6.uart%d", i + 1);
chr = qemu_chr_new(label, "null", NULL);
g_free(label);
serial_hds[i] = chr;
}
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", chr);
}
object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
serial_table[i].irq));
}
s->gpt.ccm = IMX_CCM(&s->ccm);
object_property_set_bool(OBJECT(&s->gpt), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt), 0, FSL_IMX6_GPT_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
FSL_IMX6_GPT_IRQ));
/* Initialize all EPIT timers */
for (i = 0; i < FSL_IMX6_NUM_EPITS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} epit_table[FSL_IMX6_NUM_EPITS] = {
{ FSL_IMX6_EPIT1_ADDR, FSL_IMX6_EPIT1_IRQ },
{ FSL_IMX6_EPIT2_ADDR, FSL_IMX6_EPIT2_IRQ },
};
s->epit[i].ccm = IMX_CCM(&s->ccm);
object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
epit_table[i].irq));
}
/* Initialize all I2C */
for (i = 0; i < FSL_IMX6_NUM_I2CS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} i2c_table[FSL_IMX6_NUM_I2CS] = {
{ FSL_IMX6_I2C1_ADDR, FSL_IMX6_I2C1_IRQ },
{ FSL_IMX6_I2C2_ADDR, FSL_IMX6_I2C2_IRQ },
{ FSL_IMX6_I2C3_ADDR, FSL_IMX6_I2C3_IRQ }
};
object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
i2c_table[i].irq));
}
/* Initialize all GPIOs */
for (i = 0; i < FSL_IMX6_NUM_GPIOS; i++) {
static const struct {
hwaddr addr;
unsigned int irq_low;
unsigned int irq_high;
} gpio_table[FSL_IMX6_NUM_GPIOS] = {
{
FSL_IMX6_GPIO1_ADDR,
FSL_IMX6_GPIO1_LOW_IRQ,
FSL_IMX6_GPIO1_HIGH_IRQ
},
{
FSL_IMX6_GPIO2_ADDR,
FSL_IMX6_GPIO2_LOW_IRQ,
FSL_IMX6_GPIO2_HIGH_IRQ
},
{
FSL_IMX6_GPIO3_ADDR,
FSL_IMX6_GPIO3_LOW_IRQ,
FSL_IMX6_GPIO3_HIGH_IRQ
},
{
FSL_IMX6_GPIO4_ADDR,
FSL_IMX6_GPIO4_LOW_IRQ,
FSL_IMX6_GPIO4_HIGH_IRQ
},
{
FSL_IMX6_GPIO5_ADDR,
FSL_IMX6_GPIO5_LOW_IRQ,
FSL_IMX6_GPIO5_HIGH_IRQ
},
{
FSL_IMX6_GPIO6_ADDR,
FSL_IMX6_GPIO6_LOW_IRQ,
FSL_IMX6_GPIO6_HIGH_IRQ
},
{
FSL_IMX6_GPIO7_ADDR,
FSL_IMX6_GPIO7_LOW_IRQ,
FSL_IMX6_GPIO7_HIGH_IRQ
},
};
object_property_set_bool(OBJECT(&s->gpio[i]), true, "has-edge-sel",
&error_abort);
object_property_set_bool(OBJECT(&s->gpio[i]), true, "has-upper-pin-irq",
&error_abort);
object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
gpio_table[i].irq_low));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
gpio_table[i].irq_high));
}
/* Initialize all SDHC */
for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} esdhc_table[FSL_IMX6_NUM_ESDHCS] = {
{ FSL_IMX6_uSDHC1_ADDR, FSL_IMX6_uSDHC1_IRQ },
{ FSL_IMX6_uSDHC2_ADDR, FSL_IMX6_uSDHC2_IRQ },
{ FSL_IMX6_uSDHC3_ADDR, FSL_IMX6_uSDHC3_IRQ },
{ FSL_IMX6_uSDHC4_ADDR, FSL_IMX6_uSDHC4_IRQ },
};
object_property_set_bool(OBJECT(&s->esdhc[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
esdhc_table[i].irq));
}
/* Initialize all ECSPI */
for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} spi_table[FSL_IMX6_NUM_ECSPIS] = {
{ FSL_IMX6_eCSPI1_ADDR, FSL_IMX6_ECSPI1_IRQ },
{ FSL_IMX6_eCSPI2_ADDR, FSL_IMX6_ECSPI2_IRQ },
{ FSL_IMX6_eCSPI3_ADDR, FSL_IMX6_ECSPI3_IRQ },
{ FSL_IMX6_eCSPI4_ADDR, FSL_IMX6_ECSPI4_IRQ },
{ FSL_IMX6_eCSPI5_ADDR, FSL_IMX6_ECSPI5_IRQ },
};
/* Initialize the SPI */
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
spi_table[i].irq));
}
object_property_set_bool(OBJECT(&s->eth), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth), 0, FSL_IMX6_ENET_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth), 0,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
FSL_IMX6_ENET_MAC_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth), 1,
qdev_get_gpio_in(DEVICE(&s->a9mpcore),
FSL_IMX6_ENET_MAC_1588_IRQ));
/* ROM memory */
memory_region_init_rom(&s->rom, NULL, "imx6.rom",
FSL_IMX6_ROM_SIZE, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX6_ROM_ADDR,
&s->rom);
/* CAAM memory */
memory_region_init_rom(&s->caam, NULL, "imx6.caam",
FSL_IMX6_CAAM_MEM_SIZE, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX6_CAAM_MEM_ADDR,
&s->caam);
/* OCRAM memory */
memory_region_init_ram(&s->ocram, NULL, "imx6.ocram", FSL_IMX6_OCRAM_SIZE,
&err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX6_OCRAM_ADDR,
&s->ocram);
vmstate_register_ram_global(&s->ocram);
/* internal OCRAM (256 KB) is aliased over 1 MB */
memory_region_init_alias(&s->ocram_alias, NULL, "imx6.ocram_alias",
&s->ocram, 0, FSL_IMX6_OCRAM_ALIAS_SIZE);
memory_region_add_subregion(get_system_memory(), FSL_IMX6_OCRAM_ALIAS_ADDR,
&s->ocram_alias);
}
static void fsl_imx6_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = fsl_imx6_realize;
/*
* Reason: creates an ARM CPU, thus use after free(), see
* arm_cpu_class_init()
*/
dc->cannot_destroy_with_object_finalize_yet = true;
dc->desc = "i.MX6 SOC";
}
static const TypeInfo fsl_imx6_type_info = {
.name = TYPE_FSL_IMX6,
.parent = TYPE_DEVICE,
.instance_size = sizeof(FslIMX6State),
.instance_init = fsl_imx6_init,
.class_init = fsl_imx6_class_init,
};
static void fsl_imx6_register_types(void)
{
type_register_static(&fsl_imx6_type_info);
}
type_init(fsl_imx6_register_types)
Reference in New Issue View Git Blame Copy Permalink