mirrors/qemu
0
0
Fork 0
mirror of https://github.com/qemu/qemu.git synced 2024-11-25 03:43:37 +08:00
Code Issues Packages Projects Releases Wiki Activity
d1f6af6a17
qemu/block/mirror.c
Sascha Silbe f14a39ccb9 Improve block job rate limiting for small bandwidth values 
ratelimit_calculate_delay() previously reset the accounting every time
slice, no matter how much data had been processed before. This had (at
least) two consequences:

1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream.

   Not sure if there are real-world use cases where this would be a
   problem. Mirroring and backup over a slow link (e.g. DSL) would
   come to mind, though.

2. Tests for block job operations (e.g. cancel) were rather racy

   All block jobs currently use a time slice of 100ms. That's a
   reasonable value to get smooth output during regular
   operation. However this also meant that the state of block jobs
   changed every 100ms, no matter how low the configured limit was. On
   busy hosts, qemu often transferred additional chunks until the test
   case had a chance to cancel the job.

Fix the block job rate limit code to delay for more than one time
slice to address the above issues. To make it easier to handle
oversized chunks we switch the semantics from returning a delay
_before_ the current request to a delay _after_ the current
request. If necessary, this delay consists of multiple time slice
units.

Since the mirror job sends multiple chunks in one go even if the rate
limit was exceeded in between, we need to keep track of the start of
the current time slice so we can correctly re-compute the delay for
the updated amount of data.

The minimum bandwidth now is 1 data unit per time slice. The block
jobs are currently passing the amount of data transferred in sectors
and using 100ms time slices, so this translates to 5120
bytes/second. With chunk sizes usually being O(512KiB), tests have
plenty of time (O(100s)) to operate on block jobs. The chance of a
race condition now is fairly remote, except possibly on insanely
loaded systems.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13 13:41:38 +02:00

995 lines
33 KiB
C
Raw Blame History

/*
* Image mirroring
*
* Copyright Red Hat, Inc. 2012
*
* Authors:
* Paolo Bonzini <pbonzini@redhat.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "trace.h"
#include "block/blockjob.h"
#include "block/block_int.h"
#include "sysemu/block-backend.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/ratelimit.h"
#include "qemu/bitmap.h"
#define SLICE_TIME 100000000ULL /* ns */
#define MAX_IN_FLIGHT 16
#define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
/* The mirroring buffer is a list of granularity-sized chunks.
* Free chunks are organized in a list.
*/
typedef struct MirrorBuffer {
QSIMPLEQ_ENTRY(MirrorBuffer) next;
} MirrorBuffer;
typedef struct MirrorBlockJob {
BlockJob common;
RateLimit limit;
BlockBackend *target;
BlockDriverState *base;
/* The name of the graph node to replace */
char *replaces;
/* The BDS to replace */
BlockDriverState *to_replace;
/* Used to block operations on the drive-mirror-replace target */
Error *replace_blocker;
bool is_none_mode;
BlockMirrorBackingMode backing_mode;
BlockdevOnError on_source_error, on_target_error;
bool synced;
bool should_complete;
int64_t granularity;
size_t buf_size;
int64_t bdev_length;
unsigned long *cow_bitmap;
BdrvDirtyBitmap *dirty_bitmap;
HBitmapIter hbi;
uint8_t *buf;
QSIMPLEQ_HEAD(, MirrorBuffer) buf_free;
int buf_free_count;
unsigned long *in_flight_bitmap;
int in_flight;
int sectors_in_flight;
int ret;
bool unmap;
bool waiting_for_io;
int target_cluster_sectors;
int max_iov;
} MirrorBlockJob;
typedef struct MirrorOp {
MirrorBlockJob *s;
QEMUIOVector qiov;
int64_t sector_num;
int nb_sectors;
} MirrorOp;
static BlockErrorAction mirror_error_action(MirrorBlockJob *s, bool read,
int error)
{
s->synced = false;
if (read) {
return block_job_error_action(&s->common, s->on_source_error,
true, error);
} else {
return block_job_error_action(&s->common, s->on_target_error,
false, error);
}
}
static void mirror_iteration_done(MirrorOp *op, int ret)
{
MirrorBlockJob *s = op->s;
struct iovec *iov;
int64_t chunk_num;
int i, nb_chunks, sectors_per_chunk;
trace_mirror_iteration_done(s, op->sector_num, op->nb_sectors, ret);
s->in_flight--;
s->sectors_in_flight -= op->nb_sectors;
iov = op->qiov.iov;
for (i = 0; i < op->qiov.niov; i++) {
MirrorBuffer *buf = (MirrorBuffer *) iov[i].iov_base;
QSIMPLEQ_INSERT_TAIL(&s->buf_free, buf, next);
s->buf_free_count++;
}
sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
chunk_num = op->sector_num / sectors_per_chunk;
nb_chunks = DIV_ROUND_UP(op->nb_sectors, sectors_per_chunk);
bitmap_clear(s->in_flight_bitmap, chunk_num, nb_chunks);
if (ret >= 0) {
if (s->cow_bitmap) {
bitmap_set(s->cow_bitmap, chunk_num, nb_chunks);
}
s->common.offset += (uint64_t)op->nb_sectors * BDRV_SECTOR_SIZE;
}
qemu_iovec_destroy(&op->qiov);
g_free(op);
if (s->waiting_for_io) {
qemu_coroutine_enter(s->common.co);
}
}
static void mirror_write_complete(void *opaque, int ret)
{
MirrorOp *op = opaque;
MirrorBlockJob *s = op->s;
if (ret < 0) {
BlockErrorAction action;
bdrv_set_dirty_bitmap(s->dirty_bitmap, op->sector_num, op->nb_sectors);
action = mirror_error_action(s, false, -ret);
if (action == BLOCK_ERROR_ACTION_REPORT && s->ret >= 0) {
s->ret = ret;
}
}
mirror_iteration_done(op, ret);
}
static void mirror_read_complete(void *opaque, int ret)
{
MirrorOp *op = opaque;
MirrorBlockJob *s = op->s;
if (ret < 0) {
BlockErrorAction action;
bdrv_set_dirty_bitmap(s->dirty_bitmap, op->sector_num, op->nb_sectors);
action = mirror_error_action(s, true, -ret);
if (action == BLOCK_ERROR_ACTION_REPORT && s->ret >= 0) {
s->ret = ret;
}
mirror_iteration_done(op, ret);
return;
}
blk_aio_pwritev(s->target, op->sector_num * BDRV_SECTOR_SIZE, &op->qiov,
0, mirror_write_complete, op);
}
static inline void mirror_clip_sectors(MirrorBlockJob *s,
int64_t sector_num,
int *nb_sectors)
{
*nb_sectors = MIN(*nb_sectors,
s->bdev_length / BDRV_SECTOR_SIZE - sector_num);
}
/* Round sector_num and/or nb_sectors to target cluster if COW is needed, and
* return the offset of the adjusted tail sector against original. */
static int mirror_cow_align(MirrorBlockJob *s,
int64_t *sector_num,
int *nb_sectors)
{
bool need_cow;
int ret = 0;
int chunk_sectors = s->granularity >> BDRV_SECTOR_BITS;
int64_t align_sector_num = *sector_num;
int align_nb_sectors = *nb_sectors;
int max_sectors = chunk_sectors * s->max_iov;
need_cow = !test_bit(*sector_num / chunk_sectors, s->cow_bitmap);
need_cow |= !test_bit((*sector_num + *nb_sectors - 1) / chunk_sectors,
s->cow_bitmap);
if (need_cow) {
bdrv_round_sectors_to_clusters(blk_bs(s->target), *sector_num,
*nb_sectors, &align_sector_num,
&align_nb_sectors);
}
if (align_nb_sectors > max_sectors) {
align_nb_sectors = max_sectors;
if (need_cow) {
align_nb_sectors = QEMU_ALIGN_DOWN(align_nb_sectors,
s->target_cluster_sectors);
}
}
/* Clipping may result in align_nb_sectors unaligned to chunk boundary, but
* that doesn't matter because it's already the end of source image. */
mirror_clip_sectors(s, align_sector_num, &align_nb_sectors);
ret = align_sector_num + align_nb_sectors - (*sector_num + *nb_sectors);
*sector_num = align_sector_num;
*nb_sectors = align_nb_sectors;
assert(ret >= 0);
return ret;
}
static inline void mirror_wait_for_io(MirrorBlockJob *s)
{
assert(!s->waiting_for_io);
s->waiting_for_io = true;
qemu_coroutine_yield();
s->waiting_for_io = false;
}
/* Submit async read while handling COW.
* Returns: The number of sectors copied after and including sector_num,
* excluding any sectors copied prior to sector_num due to alignment.
* This will be nb_sectors if no alignment is necessary, or
* (new_end - sector_num) if tail is rounded up or down due to
* alignment or buffer limit.
*/
static int mirror_do_read(MirrorBlockJob *s, int64_t sector_num,
int nb_sectors)
{
BlockBackend *source = s->common.blk;
int sectors_per_chunk, nb_chunks;
int ret;
MirrorOp *op;
int max_sectors;
sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
max_sectors = sectors_per_chunk * s->max_iov;
/* We can only handle as much as buf_size at a time. */
nb_sectors = MIN(s->buf_size >> BDRV_SECTOR_BITS, nb_sectors);
nb_sectors = MIN(max_sectors, nb_sectors);
assert(nb_sectors);
ret = nb_sectors;
if (s->cow_bitmap) {
ret += mirror_cow_align(s, &sector_num, &nb_sectors);
}
assert(nb_sectors << BDRV_SECTOR_BITS <= s->buf_size);
/* The sector range must meet granularity because:
* 1) Caller passes in aligned values;
* 2) mirror_cow_align is used only when target cluster is larger. */
assert(!(sector_num % sectors_per_chunk));
nb_chunks = DIV_ROUND_UP(nb_sectors, sectors_per_chunk);
while (s->buf_free_count < nb_chunks) {
trace_mirror_yield_in_flight(s, sector_num, s->in_flight);
mirror_wait_for_io(s);
}
/* Allocate a MirrorOp that is used as an AIO callback. */
op = g_new(MirrorOp, 1);
op->s = s;
op->sector_num = sector_num;
op->nb_sectors = nb_sectors;
/* Now make a QEMUIOVector taking enough granularity-sized chunks
* from s->buf_free.
*/
qemu_iovec_init(&op->qiov, nb_chunks);
while (nb_chunks-- > 0) {
MirrorBuffer *buf = QSIMPLEQ_FIRST(&s->buf_free);
size_t remaining = nb_sectors * BDRV_SECTOR_SIZE - op->qiov.size;
QSIMPLEQ_REMOVE_HEAD(&s->buf_free, next);
s->buf_free_count--;
qemu_iovec_add(&op->qiov, buf, MIN(s->granularity, remaining));
}
/* Copy the dirty cluster. */
s->in_flight++;
s->sectors_in_flight += nb_sectors;
trace_mirror_one_iteration(s, sector_num, nb_sectors);
blk_aio_preadv(source, sector_num * BDRV_SECTOR_SIZE, &op->qiov, 0,
mirror_read_complete, op);
return ret;
}
static void mirror_do_zero_or_discard(MirrorBlockJob *s,
int64_t sector_num,
int nb_sectors,
bool is_discard)
{
MirrorOp *op;
/* Allocate a MirrorOp that is used as an AIO callback. The qiov is zeroed
* so the freeing in mirror_iteration_done is nop. */
op = g_new0(MirrorOp, 1);
op->s = s;
op->sector_num = sector_num;
op->nb_sectors = nb_sectors;
s->in_flight++;
s->sectors_in_flight += nb_sectors;
if (is_discard) {
blk_aio_discard(s->target, sector_num, op->nb_sectors,
mirror_write_complete, op);
} else {
blk_aio_pwrite_zeroes(s->target, sector_num * BDRV_SECTOR_SIZE,
op->nb_sectors * BDRV_SECTOR_SIZE,
s->unmap ? BDRV_REQ_MAY_UNMAP : 0,
mirror_write_complete, op);
}
}
static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
{
BlockDriverState *source = blk_bs(s->common.blk);
int64_t sector_num, first_chunk;
uint64_t delay_ns = 0;
/* At least the first dirty chunk is mirrored in one iteration. */
int nb_chunks = 1;
int64_t end = s->bdev_length / BDRV_SECTOR_SIZE;
int sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
sector_num = hbitmap_iter_next(&s->hbi);
if (sector_num < 0) {
bdrv_dirty_iter_init(s->dirty_bitmap, &s->hbi);
sector_num = hbitmap_iter_next(&s->hbi);
trace_mirror_restart_iter(s, bdrv_get_dirty_count(s->dirty_bitmap));
assert(sector_num >= 0);
}
first_chunk = sector_num / sectors_per_chunk;
while (test_bit(first_chunk, s->in_flight_bitmap)) {
trace_mirror_yield_in_flight(s, sector_num, s->in_flight);
mirror_wait_for_io(s);
}
block_job_pause_point(&s->common);
/* Find the number of consective dirty chunks following the first dirty
* one, and wait for in flight requests in them. */
while (nb_chunks * sectors_per_chunk < (s->buf_size >> BDRV_SECTOR_BITS)) {
int64_t hbitmap_next;
int64_t next_sector = sector_num + nb_chunks * sectors_per_chunk;
int64_t next_chunk = next_sector / sectors_per_chunk;
if (next_sector >= end ||
!bdrv_get_dirty(source, s->dirty_bitmap, next_sector)) {
break;
}
if (test_bit(next_chunk, s->in_flight_bitmap)) {
break;
}
hbitmap_next = hbitmap_iter_next(&s->hbi);
if (hbitmap_next > next_sector || hbitmap_next < 0) {
/* The bitmap iterator's cache is stale, refresh it */
bdrv_set_dirty_iter(&s->hbi, next_sector);
hbitmap_next = hbitmap_iter_next(&s->hbi);
}
assert(hbitmap_next == next_sector);
nb_chunks++;
}
/* Clear dirty bits before querying the block status, because
* calling bdrv_get_block_status_above could yield - if some blocks are
* marked dirty in this window, we need to know.
*/
bdrv_reset_dirty_bitmap(s->dirty_bitmap, sector_num,
nb_chunks * sectors_per_chunk);
bitmap_set(s->in_flight_bitmap, sector_num / sectors_per_chunk, nb_chunks);
while (nb_chunks > 0 && sector_num < end) {
int ret;
int io_sectors;
BlockDriverState *file;
enum MirrorMethod {
MIRROR_METHOD_COPY,
MIRROR_METHOD_ZERO,
MIRROR_METHOD_DISCARD
} mirror_method = MIRROR_METHOD_COPY;
assert(!(sector_num % sectors_per_chunk));
ret = bdrv_get_block_status_above(source, NULL, sector_num,
nb_chunks * sectors_per_chunk,
&io_sectors, &file);
if (ret < 0) {
io_sectors = nb_chunks * sectors_per_chunk;
}
io_sectors -= io_sectors % sectors_per_chunk;
if (io_sectors < sectors_per_chunk) {
io_sectors = sectors_per_chunk;
} else if (ret >= 0 && !(ret & BDRV_BLOCK_DATA)) {
int64_t target_sector_num;
int target_nb_sectors;
bdrv_round_sectors_to_clusters(blk_bs(s->target), sector_num,
io_sectors, &target_sector_num,
&target_nb_sectors);
if (target_sector_num == sector_num &&
target_nb_sectors == io_sectors) {
mirror_method = ret & BDRV_BLOCK_ZERO ?
MIRROR_METHOD_ZERO :
MIRROR_METHOD_DISCARD;
}
}
mirror_clip_sectors(s, sector_num, &io_sectors);
switch (mirror_method) {
case MIRROR_METHOD_COPY:
io_sectors = mirror_do_read(s, sector_num, io_sectors);
break;
case MIRROR_METHOD_ZERO:
mirror_do_zero_or_discard(s, sector_num, io_sectors, false);
break;
case MIRROR_METHOD_DISCARD:
mirror_do_zero_or_discard(s, sector_num, io_sectors, true);
break;
default:
abort();
}
assert(io_sectors);
sector_num += io_sectors;
nb_chunks -= DIV_ROUND_UP(io_sectors, sectors_per_chunk);
if (s->common.speed) {
delay_ns = ratelimit_calculate_delay(&s->limit, io_sectors);
}
}
return delay_ns;
}
static void mirror_free_init(MirrorBlockJob *s)
{
int granularity = s->granularity;
size_t buf_size = s->buf_size;
uint8_t *buf = s->buf;
assert(s->buf_free_count == 0);
QSIMPLEQ_INIT(&s->buf_free);
while (buf_size != 0) {
MirrorBuffer *cur = (MirrorBuffer *)buf;
QSIMPLEQ_INSERT_TAIL(&s->buf_free, cur, next);
s->buf_free_count++;
buf_size -= granularity;
buf += granularity;
}
}
static void mirror_drain(MirrorBlockJob *s)
{
while (s->in_flight > 0) {
mirror_wait_for_io(s);
}
}
typedef struct {
int ret;
} MirrorExitData;
static void mirror_exit(BlockJob *job, void *opaque)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
MirrorExitData *data = opaque;
AioContext *replace_aio_context = NULL;
BlockDriverState *src = blk_bs(s->common.blk);
BlockDriverState *target_bs = blk_bs(s->target);
/* Make sure that the source BDS doesn't go away before we called
* block_job_completed(). */
bdrv_ref(src);
if (s->to_replace) {
replace_aio_context = bdrv_get_aio_context(s->to_replace);
aio_context_acquire(replace_aio_context);
}
if (s->should_complete && data->ret == 0) {
BlockDriverState *to_replace = src;
if (s->to_replace) {
to_replace = s->to_replace;
}
if (bdrv_get_flags(target_bs) != bdrv_get_flags(to_replace)) {
bdrv_reopen(target_bs, bdrv_get_flags(to_replace), NULL);
}
/* The mirror job has no requests in flight any more, but we need to
* drain potential other users of the BDS before changing the graph. */
bdrv_drained_begin(target_bs);
bdrv_replace_in_backing_chain(to_replace, target_bs);
bdrv_drained_end(target_bs);
/* We just changed the BDS the job BB refers to */
blk_remove_bs(job->blk);
blk_insert_bs(job->blk, src);
}
if (s->to_replace) {
bdrv_op_unblock_all(s->to_replace, s->replace_blocker);
error_free(s->replace_blocker);
bdrv_unref(s->to_replace);
}
if (replace_aio_context) {
aio_context_release(replace_aio_context);
}
g_free(s->replaces);
bdrv_op_unblock_all(target_bs, s->common.blocker);
blk_unref(s->target);
block_job_completed(&s->common, data->ret);
g_free(data);
bdrv_drained_end(src);
if (qemu_get_aio_context() == bdrv_get_aio_context(src)) {
aio_enable_external(iohandler_get_aio_context());
}
bdrv_unref(src);
}
static void coroutine_fn mirror_run(void *opaque)
{
MirrorBlockJob *s = opaque;
MirrorExitData *data;
BlockDriverState *bs = blk_bs(s->common.blk);
BlockDriverState *target_bs = blk_bs(s->target);
int64_t sector_num, end, length;
uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[2]; /* we only need 2 characters because we are only
checking for a NULL string */
int ret = 0;
int n;
int target_cluster_size = BDRV_SECTOR_SIZE;
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
s->bdev_length = bdrv_getlength(bs);
if (s->bdev_length < 0) {
ret = s->bdev_length;
goto immediate_exit;
} else if (s->bdev_length == 0) {
/* Report BLOCK_JOB_READY and wait for complete. */
block_job_event_ready(&s->common);
s->synced = true;
while (!block_job_is_cancelled(&s->common) && !s->should_complete) {
block_job_yield(&s->common);
}
s->common.cancelled = false;
goto immediate_exit;
}
length = DIV_ROUND_UP(s->bdev_length, s->granularity);
s->in_flight_bitmap = bitmap_new(length);
/* If we have no backing file yet in the destination, we cannot let
* the destination do COW. Instead, we copy sectors around the
* dirty data if needed. We need a bitmap to do that.
*/
bdrv_get_backing_filename(target_bs, backing_filename,
sizeof(backing_filename));
if (!bdrv_get_info(target_bs, &bdi) && bdi.cluster_size) {
target_cluster_size = bdi.cluster_size;
}
if (backing_filename[0] && !target_bs->backing
&& s->granularity < target_cluster_size) {
s->buf_size = MAX(s->buf_size, target_cluster_size);
s->cow_bitmap = bitmap_new(length);
}
s->target_cluster_sectors = target_cluster_size >> BDRV_SECTOR_BITS;
s->max_iov = MIN(bs->bl.max_iov, target_bs->bl.max_iov);
end = s->bdev_length / BDRV_SECTOR_SIZE;
s->buf = qemu_try_blockalign(bs, s->buf_size);
if (s->buf == NULL) {
ret = -ENOMEM;
goto immediate_exit;
}
mirror_free_init(s);
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (!s->is_none_mode) {
/* First part, loop on the sectors and initialize the dirty bitmap. */
BlockDriverState *base = s->base;
bool mark_all_dirty = s->base == NULL && !bdrv_has_zero_init(target_bs);
for (sector_num = 0; sector_num < end; ) {
/* Just to make sure we are not exceeding int limit. */
int nb_sectors = MIN(INT_MAX >> BDRV_SECTOR_BITS,
end - sector_num);
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
if (now - last_pause_ns > SLICE_TIME) {
last_pause_ns = now;
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, 0);
} else {
block_job_pause_point(&s->common);
}
if (block_job_is_cancelled(&s->common)) {
goto immediate_exit;
}
ret = bdrv_is_allocated_above(bs, base, sector_num, nb_sectors, &n);
if (ret < 0) {
goto immediate_exit;
}
assert(n > 0);
if (ret == 1 || mark_all_dirty) {
bdrv_set_dirty_bitmap(s->dirty_bitmap, sector_num, n);
}
sector_num += n;
}
}
bdrv_dirty_iter_init(s->dirty_bitmap, &s->hbi);
for (;;) {
uint64_t delay_ns = 0;
int64_t cnt;
bool should_complete;
if (s->ret < 0) {
ret = s->ret;
goto immediate_exit;
}
block_job_pause_point(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
/* s->common.offset contains the number of bytes already processed so
* far, cnt is the number of dirty sectors remaining and
* s->sectors_in_flight is the number of sectors currently being
* processed; together those are the current total operation length */
s->common.len = s->common.offset +
(cnt + s->sectors_in_flight) * BDRV_SECTOR_SIZE;
/* Note that even when no rate limit is applied we need to yield
* periodically with no pending I/O so that bdrv_drain_all() returns.
* We do so every SLICE_TIME nanoseconds, or when there is an error,
* or when the source is clean, whichever comes first.
*/
if (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - last_pause_ns < SLICE_TIME &&
s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
if (s->in_flight == MAX_IN_FLIGHT || s->buf_free_count == 0 ||
(cnt == 0 && s->in_flight > 0)) {
trace_mirror_yield(s, s->in_flight, s->buf_free_count, cnt);
mirror_wait_for_io(s);
continue;
} else if (cnt != 0) {
delay_ns = mirror_iteration(s);
}
}
should_complete = false;
if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
ret = blk_flush(s->target);
if (ret < 0) {
if (mirror_error_action(s, false, -ret) ==
BLOCK_ERROR_ACTION_REPORT) {
goto immediate_exit;
}
} else {
/* We're out of the streaming phase. From now on, if the job
* is cancelled we will actually complete all pending I/O and
* report completion. This way, block-job-cancel will leave
* the target in a consistent state.
*/
if (!s->synced) {
block_job_event_ready(&s->common);
s->synced = true;
}
should_complete = s->should_complete ||
block_job_is_cancelled(&s->common);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
}
if (cnt == 0 && should_complete) {
/* The dirty bitmap is not updated while operations are pending.
* If we're about to exit, wait for pending operations before
* calling bdrv_get_dirty_count(bs), or we may exit while the
* source has dirty data to copy!
*
* Note that I/O can be submitted by the guest while
* mirror_populate runs.
*/
trace_mirror_before_drain(s, cnt);
bdrv_co_drain(bs);
cnt = bdrv_get_dirty_count(s->dirty_bitmap);
}
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
if (!s->synced) {
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, QEMU_CLOCK_REALTIME, delay_ns);
} else if (cnt == 0) {
/* The two disks are in sync. Exit and report successful
* completion.
*/
assert(QLIST_EMPTY(&bs->tracked_requests));
s->common.cancelled = false;
break;
}
last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
}
immediate_exit:
if (s->in_flight > 0) {
/* We get here only if something went wrong. Either the job failed,
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
mirror_drain(s);
}
assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
g_free(s->in_flight_bitmap);
bdrv_release_dirty_bitmap(bs, s->dirty_bitmap);
data = g_malloc(sizeof(*data));
data->ret = ret;
/* Before we switch to target in mirror_exit, make sure data doesn't
* change. */
bdrv_drained_begin(bs);
if (qemu_get_aio_context() == bdrv_get_aio_context(bs)) {
/* FIXME: virtio host notifiers run on iohandler_ctx, therefore the
* above bdrv_drained_end isn't enough to quiesce it. This is ugly, we
* need a block layer API change to achieve this. */
aio_disable_external(iohandler_get_aio_context());
}
block_job_defer_to_main_loop(&s->common, mirror_exit, data);
}
static void mirror_set_speed(BlockJob *job, int64_t speed, Error **errp)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
if (speed < 0) {
error_setg(errp, QERR_INVALID_PARAMETER, "speed");
return;
}
ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
}
static void mirror_complete(BlockJob *job, Error **errp)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
BlockDriverState *src, *target;
src = blk_bs(job->blk);
target = blk_bs(s->target);
if (!s->synced) {
error_setg(errp, "The active block job '%s' cannot be completed",
job->id);
return;
}
if (s->backing_mode == MIRROR_OPEN_BACKING_CHAIN) {
int ret;
assert(!target->backing);
ret = bdrv_open_backing_file(target, NULL, "backing", errp);
if (ret < 0) {
return;
}
}
/* block all operations on to_replace bs */
if (s->replaces) {
AioContext *replace_aio_context;
s->to_replace = bdrv_find_node(s->replaces);
if (!s->to_replace) {
error_setg(errp, "Node name '%s' not found", s->replaces);
return;
}
replace_aio_context = bdrv_get_aio_context(s->to_replace);
aio_context_acquire(replace_aio_context);
error_setg(&s->replace_blocker,
"block device is in use by block-job-complete");
bdrv_op_block_all(s->to_replace, s->replace_blocker);
bdrv_ref(s->to_replace);
aio_context_release(replace_aio_context);
}
if (s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
BlockDriverState *backing = s->is_none_mode ? src : s->base;
if (backing_bs(target) != backing) {
bdrv_set_backing_hd(target, backing);
}
}
s->should_complete = true;
block_job_enter(&s->common);
}
/* There is no matching mirror_resume() because mirror_run() will begin
* iterating again when the job is resumed.
*/
static void coroutine_fn mirror_pause(BlockJob *job)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
mirror_drain(s);
}
static void mirror_attached_aio_context(BlockJob *job, AioContext *new_context)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
blk_set_aio_context(s->target, new_context);
}
static const BlockJobDriver mirror_job_driver = {
.instance_size = sizeof(MirrorBlockJob),
.job_type = BLOCK_JOB_TYPE_MIRROR,
.set_speed = mirror_set_speed,
.complete = mirror_complete,
.pause = mirror_pause,
.attached_aio_context = mirror_attached_aio_context,
};
static const BlockJobDriver commit_active_job_driver = {
.instance_size = sizeof(MirrorBlockJob),
.job_type = BLOCK_JOB_TYPE_COMMIT,
.set_speed = mirror_set_speed,
.complete = mirror_complete,
.pause = mirror_pause,
.attached_aio_context = mirror_attached_aio_context,
};
static void mirror_start_job(const char *job_id, BlockDriverState *bs,
BlockDriverState *target, const char *replaces,
int64_t speed, uint32_t granularity,
int64_t buf_size,
BlockMirrorBackingMode backing_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
bool unmap,
BlockCompletionFunc *cb,
void *opaque, Error **errp,
const BlockJobDriver *driver,
bool is_none_mode, BlockDriverState *base)
{
MirrorBlockJob *s;
if (granularity == 0) {
granularity = bdrv_get_default_bitmap_granularity(target);
}
assert ((granularity & (granularity - 1)) == 0);
if (buf_size < 0) {
error_setg(errp, "Invalid parameter 'buf-size'");
return;
}
if (buf_size == 0) {
buf_size = DEFAULT_MIRROR_BUF_SIZE;
}
s = block_job_create(job_id, driver, bs, speed, cb, opaque, errp);
if (!s) {
return;
}
s->target = blk_new();
blk_insert_bs(s->target, target);
s->replaces = g_strdup(replaces);
s->on_source_error = on_source_error;
s->on_target_error = on_target_error;
s->is_none_mode = is_none_mode;
s->backing_mode = backing_mode;
s->base = base;
s->granularity = granularity;
s->buf_size = ROUND_UP(buf_size, granularity);
s->unmap = unmap;
s->dirty_bitmap = bdrv_create_dirty_bitmap(bs, granularity, NULL, errp);
if (!s->dirty_bitmap) {
g_free(s->replaces);
blk_unref(s->target);
block_job_unref(&s->common);
return;
}
bdrv_op_block_all(target, s->common.blocker);
s->common.co = qemu_coroutine_create(mirror_run, s);
trace_mirror_start(bs, s, s->common.co, opaque);
qemu_coroutine_enter(s->common.co);
}
void mirror_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *target, const char *replaces,
int64_t speed, uint32_t granularity, int64_t buf_size,
MirrorSyncMode mode, BlockMirrorBackingMode backing_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
bool unmap,
BlockCompletionFunc *cb,
void *opaque, Error **errp)
{
bool is_none_mode;
BlockDriverState *base;
if (mode == MIRROR_SYNC_MODE_INCREMENTAL) {
error_setg(errp, "Sync mode 'incremental' not supported");
return;
}
is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
base = mode == MIRROR_SYNC_MODE_TOP ? backing_bs(bs) : NULL;
mirror_start_job(job_id, bs, target, replaces,
speed, granularity, buf_size, backing_mode,
on_source_error, on_target_error, unmap, cb, opaque, errp,
&mirror_job_driver, is_none_mode, base);
}
void commit_active_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, int64_t speed,
BlockdevOnError on_error,
BlockCompletionFunc *cb,
void *opaque, Error **errp)
{
int64_t length, base_length;
int orig_base_flags;
int ret;
Error *local_err = NULL;
orig_base_flags = bdrv_get_flags(base);
if (bdrv_reopen(base, bs->open_flags, errp)) {
return;
}
length = bdrv_getlength(bs);
if (length < 0) {
error_setg_errno(errp, -length,
"Unable to determine length of %s", bs->filename);
goto error_restore_flags;
}
base_length = bdrv_getlength(base);
if (base_length < 0) {
error_setg_errno(errp, -base_length,
"Unable to determine length of %s", base->filename);
goto error_restore_flags;
}
if (length > base_length) {
ret = bdrv_truncate(base, length);
if (ret < 0) {
error_setg_errno(errp, -ret,
"Top image %s is larger than base image %s, and "
"resize of base image failed",
bs->filename, base->filename);
goto error_restore_flags;
}
}
mirror_start_job(job_id, bs, base, NULL, speed, 0, 0,
MIRROR_LEAVE_BACKING_CHAIN,
on_error, on_error, false, cb, opaque, &local_err,
&commit_active_job_driver, false, base);
if (local_err) {
error_propagate(errp, local_err);
goto error_restore_flags;
}
return;
error_restore_flags:
/* ignore error and errp for bdrv_reopen, because we want to propagate
* the original error */
bdrv_reopen(base, orig_base_flags, NULL);
return;
}
Reference in New Issue View Git Blame Copy Permalink