qemu/include/hw
Peter Maydell aab7a3786f hw/arm/armsse: Unify init-svtor and cpuwait handling
At the moment the handling of init-svtor and cpuwait initial
values is split between armsse.c and iotkit-sysctl.c:
the code in armsse.c sets the initial state of the CPU
object by setting the init-svtor and start-powered-off
properties, but the iotkit-sysctl.c code has its own
code setting the reset values of its registers (which are
then used when updating the CPU when the guest makes
runtime changes).

Clean this up by making the armsse.c code set properties on the
iotkit-sysctl object to define the initial values of the
registers, so they always match the initial CPU state,
and update the comments in armsse.c accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219125808.25174-9-peter.maydell@linaro.org
2019-02-28 11:03:04 +00:00
..
acpi typo: apci->acpi 2019-01-30 10:16:58 +01:00
adc STM32F2xx: Add the ADC device 2016-10-04 13:28:07 +01:00
arm hw/arm/armsse: Wire up the MHUs 2019-02-28 11:03:04 +00:00
audio audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string 2018-10-29 13:50:15 +01:00
block block: Remove deprecated -drive option serial 2018-08-15 12:50:39 +02:00
char hw/char/pl011: Support all interrupt lines 2019-02-21 18:17:46 +00:00
core hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
cpu qom/cpu: Add cluster_index to CPUState 2019-01-29 11:46:05 +00:00
cris char: rename CharDriverState Chardev 2017-01-27 18:07:59 +01:00
display hw/display/milkymist-tmu2: Move inlined code from header to source 2019-02-01 11:58:50 +01:00
dma hw/dma/pl080: Don't use CPU address space for DMA accesses 2018-08-20 11:24:33 +01:00
firmware hw/smbios: Move to the hw/firmware/ subdirectory 2018-12-19 16:48:16 -05:00
gpio hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral 2019-01-07 15:23:47 +00:00
hyperv hyperv: process POST_MESSAGE hypercall 2018-10-19 13:44:14 +02:00
i2c smbus: Add a helper to generate SPD EEPROM data 2019-02-04 18:44:17 +11:00
i386 hw/i386/pc: enable PVH only for machine type >= 4.0 2019-02-05 16:50:17 +01:00
ide hw/ide: drop iov field from IDEDMA 2019-02-22 09:42:13 +00:00
input hw/input/ps2: Remove PS2State from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
intc qom: make interface types abstract 2018-12-11 15:45:22 -02:00
ipack ipack: Update e-mail address 2016-05-18 15:04:27 +03:00
ipmi qom: make interface types abstract 2018-12-11 15:45:22 -02:00
isa qom: make interface types abstract 2018-12-11 15:45:22 -02:00
kvm
lm32 intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface 2016-10-04 10:00:25 +02:00
m68k hw/char/mcf_uart: QOMify the ColdFire UART 2017-02-16 14:06:56 +01:00
mem qom: make interface types abstract 2018-12-11 15:45:22 -02:00
mips hw/mips: Use the IEC binary prefix definitions 2018-07-02 15:41:16 +02:00
misc hw/arm/armsse: Unify init-svtor and cpuwait handling 2019-02-28 11:03:04 +00:00
net net: cadence_gem: Add support for selecting the DMA MemoryRegion 2018-10-16 17:13:49 +01:00
nvram hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories 2019-02-01 15:31:26 +00:00
pci pci/msi: export msi_is_masked() 2019-02-05 10:58:33 -05:00
pci-bridge Clean up includes 2018-02-09 05:05:11 +01:00
pci-host spapr: Rename xics to intc in interrupt controller agnostic code 2019-02-17 21:54:02 +11:00
ppc xics: Drop the KVM ICS class 2019-02-18 10:52:08 +11:00
riscv sifive_uart: Implement interrupt pending register 2018-12-20 12:08:43 -08:00
s390x target/s390x: Split out s390-tod.h 2019-02-18 11:25:43 +01:00
scsi scsi: esp: Defer command completion until previous interrupts have been handled 2019-01-11 13:57:24 +01:00
sd sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) 2018-06-08 13:15:34 +01:00
sh4 avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
sparc sun4u_iommu: update to reflect IOMMU is no longer part of the APB device 2018-01-09 21:48:20 +00:00
ssi aspeed/smc: snoop SPI transfers to fake dummy cycles 2019-01-29 11:46:05 +00:00
timer hw/timer/pl031: Allow use as an embedded-struct device 2019-02-21 18:17:46 +00:00
tricore Clean up header guards that don't match their file name 2016-07-12 16:19:16 +02:00
unicore32 hw/unicore32: restrict hw addr defines to source file 2017-12-18 17:07:02 +03:00
usb usb: Add basic code to emulate Chipidea USB IP 2018-02-09 10:40:30 +00:00
vfio qemu/queue.h: typedef QTAILQ heads 2019-01-11 15:46:55 +01:00
virtio Pull request 2019-02-25 17:28:04 +00:00
watchdog hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module 2018-08-20 11:24:33 +01:00
xen pvh: Add x86/HVM direct boot ABI header file 2019-02-05 16:50:16 +01:00
xtensa target/xtensa: add MX interrupt controller 2019-01-28 11:55:20 -08:00
boards.h qemu-options: Remove deprecated "-virtioconsole" option 2019-02-05 16:50:19 +01:00
bt.h char: rename CharDriverState Chardev 2017-01-27 18:07:59 +01:00
devices.h ui/console: Remove MouseTransformInfo from qemu/typedefs.h 2019-01-22 05:14:33 +01:00
elf_ops.h elf-ops.h: Add get_elf_note_type() 2019-02-05 16:50:16 +01:00
empty_slot.h Clean up decorations and whitespace around header guards 2016-07-12 16:20:46 +02:00
fw-path-provider.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hotplug.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hw.h migration: Split qemu-file.h 2017-06-01 18:49:22 +02:00
ide.h ide/via: Rename functions to match device name 2019-01-25 14:52:12 -05:00
irq.h hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
loader-fit.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
loader.h elf: Add optional function ptr to load_elf() to parse ELF notes 2019-02-05 16:50:16 +01:00
nmi.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
or-irq.h hw/core/or-irq: Support more than 16 inputs to an OR gate 2018-06-15 15:23:34 +01:00
pcmcia.h hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
platform-bus.h platform-bus-device: use device plug callback instead of machine_done notifier 2018-05-10 18:10:56 +01:00
ptimer.h ptimer: Add TRIGGER_ONLY_ON_DECREMENT policy option 2018-07-09 14:51:34 +01:00
qdev-core.h qdev: pass an Object * to qbus_set_hotplug_handler() 2019-02-17 21:54:02 +11:00
qdev-dma.h
qdev-properties.h qapi: Define PCIe link speed and width properties 2018-12-19 16:48:16 -05:00
qdev.h
register.h hw: register: Run post_write hook on reset 2018-03-01 11:05:43 +00:00
registerfields.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
stream.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
sysbus.h core/sysbus: remove the SysBusDeviceClass::init path 2018-12-13 13:48:03 +00:00
usb.h qemu/queue.h: simplify reverse access to QTAILQ 2019-01-11 15:46:55 +01:00