mirror of
https://github.com/qemu/qemu.git
synced 2024-12-06 02:03:38 +08:00
312942619a
* bonzini/scsi-next: scsi-disk: add support for the UNMAP command scsi-disk: improve out-of-range LBA detection for WRITE SAME scsi-disk: more assertions and resets for aiocb virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags iscsi: Pick default initiator-name based on the name of the VM iscsi: reorganize code for parse_initiator_name iscsi: do not leak initiator_name
2494 lines
74 KiB
C
2494 lines
74 KiB
C
/*
|
|
* SCSI Device emulation
|
|
*
|
|
* Copyright (c) 2006 CodeSourcery.
|
|
* Based on code by Fabrice Bellard
|
|
*
|
|
* Written by Paul Brook
|
|
* Modifications:
|
|
* 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
|
|
* when the allocation length of CDB is smaller
|
|
* than 36.
|
|
* 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
|
|
* MODE SENSE response.
|
|
*
|
|
* This code is licensed under the LGPL.
|
|
*
|
|
* Note that this file only handles the SCSI architecture model and device
|
|
* commands. Emulation of interface/link layer protocols is handled by
|
|
* the host adapter emulator.
|
|
*/
|
|
|
|
//#define DEBUG_SCSI
|
|
|
|
#ifdef DEBUG_SCSI
|
|
#define DPRINTF(fmt, ...) \
|
|
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
|
|
#else
|
|
#define DPRINTF(fmt, ...) do {} while(0)
|
|
#endif
|
|
|
|
#include "qemu-common.h"
|
|
#include "qemu-error.h"
|
|
#include "scsi.h"
|
|
#include "scsi-defs.h"
|
|
#include "sysemu.h"
|
|
#include "blockdev.h"
|
|
#include "hw/block-common.h"
|
|
#include "dma.h"
|
|
|
|
#ifdef __linux
|
|
#include <scsi/sg.h>
|
|
#endif
|
|
|
|
#define SCSI_DMA_BUF_SIZE 131072
|
|
#define SCSI_MAX_INQUIRY_LEN 256
|
|
#define SCSI_MAX_MODE_LEN 256
|
|
|
|
typedef struct SCSIDiskState SCSIDiskState;
|
|
|
|
typedef struct SCSIDiskReq {
|
|
SCSIRequest req;
|
|
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
|
|
uint64_t sector;
|
|
uint32_t sector_count;
|
|
uint32_t buflen;
|
|
bool started;
|
|
struct iovec iov;
|
|
QEMUIOVector qiov;
|
|
BlockAcctCookie acct;
|
|
} SCSIDiskReq;
|
|
|
|
#define SCSI_DISK_F_REMOVABLE 0
|
|
#define SCSI_DISK_F_DPOFUA 1
|
|
|
|
struct SCSIDiskState
|
|
{
|
|
SCSIDevice qdev;
|
|
uint32_t features;
|
|
bool media_changed;
|
|
bool media_event;
|
|
bool eject_request;
|
|
uint64_t wwn;
|
|
QEMUBH *bh;
|
|
char *version;
|
|
char *serial;
|
|
char *vendor;
|
|
char *product;
|
|
bool tray_open;
|
|
bool tray_locked;
|
|
};
|
|
|
|
static int scsi_handle_rw_error(SCSIDiskReq *r, int error);
|
|
|
|
static void scsi_free_request(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
if (r->iov.iov_base) {
|
|
qemu_vfree(r->iov.iov_base);
|
|
}
|
|
}
|
|
|
|
/* Helper function for command completion with sense. */
|
|
static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense)
|
|
{
|
|
DPRINTF("Command complete tag=0x%x sense=%d/%d/%d\n",
|
|
r->req.tag, sense.key, sense.asc, sense.ascq);
|
|
scsi_req_build_sense(&r->req, sense);
|
|
scsi_req_complete(&r->req, CHECK_CONDITION);
|
|
}
|
|
|
|
/* Cancel a pending data transfer. */
|
|
static void scsi_cancel_io(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
DPRINTF("Cancel tag=0x%x\n", req->tag);
|
|
if (r->req.aiocb) {
|
|
bdrv_aio_cancel(r->req.aiocb);
|
|
|
|
/* This reference was left in by scsi_*_data. We take ownership of
|
|
* it the moment scsi_req_cancel is called, independent of whether
|
|
* bdrv_aio_cancel completes the request or not. */
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
r->req.aiocb = NULL;
|
|
}
|
|
|
|
static uint32_t scsi_init_iovec(SCSIDiskReq *r, size_t size)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
|
|
if (!r->iov.iov_base) {
|
|
r->buflen = size;
|
|
r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
|
|
}
|
|
r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
|
|
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
|
|
return r->qiov.size / 512;
|
|
}
|
|
|
|
static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
qemu_put_be64s(f, &r->sector);
|
|
qemu_put_be32s(f, &r->sector_count);
|
|
qemu_put_be32s(f, &r->buflen);
|
|
if (r->buflen) {
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
|
|
} else if (!req->retry) {
|
|
uint32_t len = r->iov.iov_len;
|
|
qemu_put_be32s(f, &len);
|
|
qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
qemu_get_be64s(f, &r->sector);
|
|
qemu_get_be32s(f, &r->sector_count);
|
|
qemu_get_be32s(f, &r->buflen);
|
|
if (r->buflen) {
|
|
scsi_init_iovec(r, r->buflen);
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
|
|
} else if (!r->req.retry) {
|
|
uint32_t len;
|
|
qemu_get_be32s(f, &len);
|
|
r->iov.iov_len = len;
|
|
assert(r->iov.iov_len <= r->buflen);
|
|
qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len);
|
|
}
|
|
}
|
|
|
|
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
|
|
}
|
|
|
|
static void scsi_aio_complete(void *opaque, int ret)
|
|
{
|
|
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
|
|
assert(r->req.aiocb != NULL);
|
|
r->req.aiocb = NULL;
|
|
bdrv_acct_done(s->qdev.conf.bs, &r->acct);
|
|
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
scsi_req_complete(&r->req, GOOD);
|
|
|
|
done:
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
static bool scsi_is_cmd_fua(SCSICommand *cmd)
|
|
{
|
|
switch (cmd->buf[0]) {
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
return (cmd->buf[1] & 8) != 0;
|
|
|
|
case VERIFY_10:
|
|
case VERIFY_12:
|
|
case VERIFY_16:
|
|
case WRITE_VERIFY_10:
|
|
case WRITE_VERIFY_12:
|
|
case WRITE_VERIFY_16:
|
|
return true;
|
|
|
|
case READ_6:
|
|
case WRITE_6:
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void scsi_write_do_fua(SCSIDiskReq *r)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
|
|
if (scsi_is_cmd_fua(&r->req.cmd)) {
|
|
bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
|
|
r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
|
|
return;
|
|
}
|
|
|
|
scsi_req_complete(&r->req, GOOD);
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
static void scsi_dma_complete(void *opaque, int ret)
|
|
{
|
|
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
|
|
assert(r->req.aiocb != NULL);
|
|
r->req.aiocb = NULL;
|
|
bdrv_acct_done(s->qdev.conf.bs, &r->acct);
|
|
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
r->sector += r->sector_count;
|
|
r->sector_count = 0;
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
scsi_write_do_fua(r);
|
|
return;
|
|
} else {
|
|
scsi_req_complete(&r->req, GOOD);
|
|
}
|
|
|
|
done:
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
static void scsi_read_complete(void * opaque, int ret)
|
|
{
|
|
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
int n;
|
|
|
|
assert(r->req.aiocb != NULL);
|
|
r->req.aiocb = NULL;
|
|
bdrv_acct_done(s->qdev.conf.bs, &r->acct);
|
|
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->qiov.size);
|
|
|
|
n = r->qiov.size / 512;
|
|
r->sector += n;
|
|
r->sector_count -= n;
|
|
scsi_req_data(&r->req, r->qiov.size);
|
|
|
|
done:
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
/* Actually issue a read to the block device. */
|
|
static void scsi_do_read(void *opaque, int ret)
|
|
{
|
|
SCSIDiskReq *r = opaque;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
uint32_t n;
|
|
|
|
if (r->req.aiocb != NULL) {
|
|
r->req.aiocb = NULL;
|
|
bdrv_acct_done(s->qdev.conf.bs, &r->acct);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (r->req.io_canceled) {
|
|
return;
|
|
}
|
|
|
|
/* The request is used as the AIO opaque value, so add a ref. */
|
|
scsi_req_ref(&r->req);
|
|
|
|
if (r->req.sg) {
|
|
dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_READ);
|
|
r->req.resid -= r->req.sg->size;
|
|
r->req.aiocb = dma_bdrv_read(s->qdev.conf.bs, r->req.sg, r->sector,
|
|
scsi_dma_complete, r);
|
|
} else {
|
|
n = scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
|
|
bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_READ);
|
|
r->req.aiocb = bdrv_aio_readv(s->qdev.conf.bs, r->sector, &r->qiov, n,
|
|
scsi_read_complete, r);
|
|
}
|
|
|
|
done:
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
/* Read more data from scsi device into buffer. */
|
|
static void scsi_read_data(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
bool first;
|
|
|
|
DPRINTF("Read sector_count=%d\n", r->sector_count);
|
|
if (r->sector_count == 0) {
|
|
/* This also clears the sense buffer for REQUEST SENSE. */
|
|
scsi_req_complete(&r->req, GOOD);
|
|
return;
|
|
}
|
|
|
|
/* No data transfer may already be in progress */
|
|
assert(r->req.aiocb == NULL);
|
|
|
|
/* The request is used as the AIO opaque value, so add a ref. */
|
|
scsi_req_ref(&r->req);
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
DPRINTF("Data transfer direction invalid\n");
|
|
scsi_read_complete(r, -EINVAL);
|
|
return;
|
|
}
|
|
|
|
if (s->tray_open) {
|
|
scsi_read_complete(r, -ENOMEDIUM);
|
|
return;
|
|
}
|
|
|
|
first = !r->started;
|
|
r->started = true;
|
|
if (first && scsi_is_cmd_fua(&r->req.cmd)) {
|
|
bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
|
|
r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_do_read, r);
|
|
} else {
|
|
scsi_do_read(r, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* scsi_handle_rw_error has two return values. 0 means that the error
|
|
* must be ignored, 1 means that the error has been processed and the
|
|
* caller should not do anything else for this request. Note that
|
|
* scsi_handle_rw_error always manages its reference counts, independent
|
|
* of the return value.
|
|
*/
|
|
static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
|
|
{
|
|
int is_read = (r->req.cmd.xfer == SCSI_XFER_FROM_DEV);
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
BlockErrorAction action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
|
|
|
|
if (action == BLOCK_ERR_IGNORE) {
|
|
bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
|
|
return 0;
|
|
}
|
|
|
|
if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
|
|
|| action == BLOCK_ERR_STOP_ANY) {
|
|
|
|
bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
|
|
vm_stop(RUN_STATE_IO_ERROR);
|
|
bdrv_iostatus_set_err(s->qdev.conf.bs, error);
|
|
scsi_req_retry(&r->req);
|
|
} else {
|
|
switch (error) {
|
|
case ENOMEDIUM:
|
|
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
|
|
break;
|
|
case ENOMEM:
|
|
scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
|
|
break;
|
|
case EINVAL:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
break;
|
|
default:
|
|
scsi_check_condition(r, SENSE_CODE(IO_ERROR));
|
|
break;
|
|
}
|
|
bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_REPORT, is_read);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void scsi_write_complete(void * opaque, int ret)
|
|
{
|
|
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
uint32_t n;
|
|
|
|
if (r->req.aiocb != NULL) {
|
|
r->req.aiocb = NULL;
|
|
bdrv_acct_done(s->qdev.conf.bs, &r->acct);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
n = r->qiov.size / 512;
|
|
r->sector += n;
|
|
r->sector_count -= n;
|
|
if (r->sector_count == 0) {
|
|
scsi_write_do_fua(r);
|
|
return;
|
|
} else {
|
|
scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
|
|
DPRINTF("Write complete tag=0x%x more=%zd\n", r->req.tag, r->qiov.size);
|
|
scsi_req_data(&r->req, r->qiov.size);
|
|
}
|
|
|
|
done:
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
}
|
|
|
|
static void scsi_write_data(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
uint32_t n;
|
|
|
|
/* No data transfer may already be in progress */
|
|
assert(r->req.aiocb == NULL);
|
|
|
|
/* The request is used as the AIO opaque value, so add a ref. */
|
|
scsi_req_ref(&r->req);
|
|
if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
|
|
DPRINTF("Data transfer direction invalid\n");
|
|
scsi_write_complete(r, -EINVAL);
|
|
return;
|
|
}
|
|
|
|
if (!r->req.sg && !r->qiov.size) {
|
|
/* Called for the first time. Ask the driver to send us more data. */
|
|
r->started = true;
|
|
scsi_write_complete(r, 0);
|
|
return;
|
|
}
|
|
if (s->tray_open) {
|
|
scsi_write_complete(r, -ENOMEDIUM);
|
|
return;
|
|
}
|
|
|
|
if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 ||
|
|
r->req.cmd.buf[0] == VERIFY_16) {
|
|
if (r->req.sg) {
|
|
scsi_dma_complete(r, 0);
|
|
} else {
|
|
scsi_write_complete(r, 0);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (r->req.sg) {
|
|
dma_acct_start(s->qdev.conf.bs, &r->acct, r->req.sg, BDRV_ACCT_WRITE);
|
|
r->req.resid -= r->req.sg->size;
|
|
r->req.aiocb = dma_bdrv_write(s->qdev.conf.bs, r->req.sg, r->sector,
|
|
scsi_dma_complete, r);
|
|
} else {
|
|
n = r->qiov.size / 512;
|
|
bdrv_acct_start(s->qdev.conf.bs, &r->acct, n * BDRV_SECTOR_SIZE, BDRV_ACCT_WRITE);
|
|
r->req.aiocb = bdrv_aio_writev(s->qdev.conf.bs, r->sector, &r->qiov, n,
|
|
scsi_write_complete, r);
|
|
}
|
|
}
|
|
|
|
/* Return a pointer to the data buffer. */
|
|
static uint8_t *scsi_get_buf(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
return (uint8_t *)r->iov.iov_base;
|
|
}
|
|
|
|
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
|
|
int buflen = 0;
|
|
int start;
|
|
|
|
if (req->cmd.buf[1] & 0x1) {
|
|
/* Vital product data */
|
|
uint8_t page_code = req->cmd.buf[2];
|
|
|
|
outbuf[buflen++] = s->qdev.type & 0x1f;
|
|
outbuf[buflen++] = page_code ; // this page
|
|
outbuf[buflen++] = 0x00;
|
|
outbuf[buflen++] = 0x00;
|
|
start = buflen;
|
|
|
|
switch (page_code) {
|
|
case 0x00: /* Supported page codes, mandatory */
|
|
{
|
|
DPRINTF("Inquiry EVPD[Supported pages] "
|
|
"buffer size %zd\n", req->cmd.xfer);
|
|
outbuf[buflen++] = 0x00; // list of supported pages (this page)
|
|
if (s->serial) {
|
|
outbuf[buflen++] = 0x80; // unit serial number
|
|
}
|
|
outbuf[buflen++] = 0x83; // device identification
|
|
if (s->qdev.type == TYPE_DISK) {
|
|
outbuf[buflen++] = 0xb0; // block limits
|
|
outbuf[buflen++] = 0xb2; // thin provisioning
|
|
}
|
|
break;
|
|
}
|
|
case 0x80: /* Device serial number, optional */
|
|
{
|
|
int l;
|
|
|
|
if (!s->serial) {
|
|
DPRINTF("Inquiry (EVPD[Serial number] not supported\n");
|
|
return -1;
|
|
}
|
|
|
|
l = strlen(s->serial);
|
|
if (l > 20) {
|
|
l = 20;
|
|
}
|
|
|
|
DPRINTF("Inquiry EVPD[Serial number] "
|
|
"buffer size %zd\n", req->cmd.xfer);
|
|
memcpy(outbuf+buflen, s->serial, l);
|
|
buflen += l;
|
|
break;
|
|
}
|
|
|
|
case 0x83: /* Device identification page, mandatory */
|
|
{
|
|
const char *str = s->serial ?: bdrv_get_device_name(s->qdev.conf.bs);
|
|
int max_len = s->serial ? 20 : 255 - 8;
|
|
int id_len = strlen(str);
|
|
|
|
if (id_len > max_len) {
|
|
id_len = max_len;
|
|
}
|
|
DPRINTF("Inquiry EVPD[Device identification] "
|
|
"buffer size %zd\n", req->cmd.xfer);
|
|
|
|
outbuf[buflen++] = 0x2; // ASCII
|
|
outbuf[buflen++] = 0; // not officially assigned
|
|
outbuf[buflen++] = 0; // reserved
|
|
outbuf[buflen++] = id_len; // length of data following
|
|
memcpy(outbuf+buflen, str, id_len);
|
|
buflen += id_len;
|
|
|
|
if (s->wwn) {
|
|
outbuf[buflen++] = 0x1; // Binary
|
|
outbuf[buflen++] = 0x3; // NAA
|
|
outbuf[buflen++] = 0; // reserved
|
|
outbuf[buflen++] = 8;
|
|
stq_be_p(&outbuf[buflen], s->wwn);
|
|
buflen += 8;
|
|
}
|
|
break;
|
|
}
|
|
case 0xb0: /* block limits */
|
|
{
|
|
unsigned int unmap_sectors =
|
|
s->qdev.conf.discard_granularity / s->qdev.blocksize;
|
|
unsigned int min_io_size =
|
|
s->qdev.conf.min_io_size / s->qdev.blocksize;
|
|
unsigned int opt_io_size =
|
|
s->qdev.conf.opt_io_size / s->qdev.blocksize;
|
|
|
|
if (s->qdev.type == TYPE_ROM) {
|
|
DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
|
|
page_code);
|
|
return -1;
|
|
}
|
|
/* required VPD size with unmap support */
|
|
buflen = 0x40;
|
|
memset(outbuf + 4, 0, buflen - 4);
|
|
|
|
/* optimal transfer length granularity */
|
|
outbuf[6] = (min_io_size >> 8) & 0xff;
|
|
outbuf[7] = min_io_size & 0xff;
|
|
|
|
/* optimal transfer length */
|
|
outbuf[12] = (opt_io_size >> 24) & 0xff;
|
|
outbuf[13] = (opt_io_size >> 16) & 0xff;
|
|
outbuf[14] = (opt_io_size >> 8) & 0xff;
|
|
outbuf[15] = opt_io_size & 0xff;
|
|
|
|
/* optimal unmap granularity */
|
|
outbuf[28] = (unmap_sectors >> 24) & 0xff;
|
|
outbuf[29] = (unmap_sectors >> 16) & 0xff;
|
|
outbuf[30] = (unmap_sectors >> 8) & 0xff;
|
|
outbuf[31] = unmap_sectors & 0xff;
|
|
break;
|
|
}
|
|
case 0xb2: /* thin provisioning */
|
|
{
|
|
buflen = 8;
|
|
outbuf[4] = 0;
|
|
outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */
|
|
outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1;
|
|
outbuf[7] = 0;
|
|
break;
|
|
}
|
|
default:
|
|
return -1;
|
|
}
|
|
/* done with EVPD */
|
|
assert(buflen - start <= 255);
|
|
outbuf[start - 1] = buflen - start;
|
|
return buflen;
|
|
}
|
|
|
|
/* Standard INQUIRY data */
|
|
if (req->cmd.buf[2] != 0) {
|
|
return -1;
|
|
}
|
|
|
|
/* PAGE CODE == 0 */
|
|
buflen = req->cmd.xfer;
|
|
if (buflen > SCSI_MAX_INQUIRY_LEN) {
|
|
buflen = SCSI_MAX_INQUIRY_LEN;
|
|
}
|
|
memset(outbuf, 0, buflen);
|
|
|
|
outbuf[0] = s->qdev.type & 0x1f;
|
|
outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0;
|
|
|
|
strpadcpy((char *) &outbuf[16], 16, s->product, ' ');
|
|
strpadcpy((char *) &outbuf[8], 8, s->vendor, ' ');
|
|
|
|
memset(&outbuf[32], 0, 4);
|
|
memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
|
|
/*
|
|
* We claim conformance to SPC-3, which is required for guests
|
|
* to ask for modern features like READ CAPACITY(16) or the
|
|
* block characteristics VPD page by default. Not all of SPC-3
|
|
* is actually implemented, but we're good enough.
|
|
*/
|
|
outbuf[2] = 5;
|
|
outbuf[3] = 2; /* Format 2 */
|
|
|
|
if (buflen > 36) {
|
|
outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
|
|
} else {
|
|
/* If the allocation length of CDB is too small,
|
|
the additional length is not adjusted */
|
|
outbuf[4] = 36 - 5;
|
|
}
|
|
|
|
/* Sync data transfer and TCQ. */
|
|
outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0);
|
|
return buflen;
|
|
}
|
|
|
|
static inline bool media_is_dvd(SCSIDiskState *s)
|
|
{
|
|
uint64_t nb_sectors;
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return false;
|
|
}
|
|
if (!bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
return false;
|
|
}
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
return nb_sectors > CD_MAX_SECTORS;
|
|
}
|
|
|
|
static inline bool media_is_cd(SCSIDiskState *s)
|
|
{
|
|
uint64_t nb_sectors;
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return false;
|
|
}
|
|
if (!bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
return false;
|
|
}
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
return nb_sectors <= CD_MAX_SECTORS;
|
|
}
|
|
|
|
static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r,
|
|
uint8_t *outbuf)
|
|
{
|
|
uint8_t type = r->req.cmd.buf[1] & 7;
|
|
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return -1;
|
|
}
|
|
|
|
/* Types 1/2 are only defined for Blu-Ray. */
|
|
if (type != 0) {
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
return -1;
|
|
}
|
|
|
|
memset(outbuf, 0, 34);
|
|
outbuf[1] = 32;
|
|
outbuf[2] = 0xe; /* last session complete, disc finalized */
|
|
outbuf[3] = 1; /* first track on disc */
|
|
outbuf[4] = 1; /* # of sessions */
|
|
outbuf[5] = 1; /* first track of last session */
|
|
outbuf[6] = 1; /* last track of last session */
|
|
outbuf[7] = 0x20; /* unrestricted use */
|
|
outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */
|
|
/* 9-10-11: most significant byte corresponding bytes 4-5-6 */
|
|
/* 12-23: not meaningful for CD-ROM or DVD-ROM */
|
|
/* 24-31: disc bar code */
|
|
/* 32: disc application code */
|
|
/* 33: number of OPC tables */
|
|
|
|
return 34;
|
|
}
|
|
|
|
static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r,
|
|
uint8_t *outbuf)
|
|
{
|
|
static const int rds_caps_size[5] = {
|
|
[0] = 2048 + 4,
|
|
[1] = 4 + 4,
|
|
[3] = 188 + 4,
|
|
[4] = 2048 + 4,
|
|
};
|
|
|
|
uint8_t media = r->req.cmd.buf[1];
|
|
uint8_t layer = r->req.cmd.buf[6];
|
|
uint8_t format = r->req.cmd.buf[7];
|
|
int size = -1;
|
|
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return -1;
|
|
}
|
|
if (media != 0) {
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
return -1;
|
|
}
|
|
|
|
if (format != 0xff) {
|
|
if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
|
|
return -1;
|
|
}
|
|
if (media_is_cd(s)) {
|
|
scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT));
|
|
return -1;
|
|
}
|
|
if (format >= ARRAY_SIZE(rds_caps_size)) {
|
|
return -1;
|
|
}
|
|
size = rds_caps_size[format];
|
|
memset(outbuf, 0, size);
|
|
}
|
|
|
|
switch (format) {
|
|
case 0x00: {
|
|
/* Physical format information */
|
|
uint64_t nb_sectors;
|
|
if (layer != 0) {
|
|
goto fail;
|
|
}
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
|
|
outbuf[4] = 1; /* DVD-ROM, part version 1 */
|
|
outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
|
|
outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */
|
|
outbuf[7] = 0; /* default densities */
|
|
|
|
stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */
|
|
stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */
|
|
break;
|
|
}
|
|
|
|
case 0x01: /* DVD copyright information, all zeros */
|
|
break;
|
|
|
|
case 0x03: /* BCA information - invalid field for no BCA info */
|
|
return -1;
|
|
|
|
case 0x04: /* DVD disc manufacturing information, all zeros */
|
|
break;
|
|
|
|
case 0xff: { /* List capabilities */
|
|
int i;
|
|
size = 4;
|
|
for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) {
|
|
if (!rds_caps_size[i]) {
|
|
continue;
|
|
}
|
|
outbuf[size] = i;
|
|
outbuf[size + 1] = 0x40; /* Not writable, readable */
|
|
stw_be_p(&outbuf[size + 2], rds_caps_size[i]);
|
|
size += 4;
|
|
}
|
|
break;
|
|
}
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
/* Size of buffer, not including 2 byte size field */
|
|
stw_be_p(outbuf, size - 2);
|
|
return size;
|
|
|
|
fail:
|
|
return -1;
|
|
}
|
|
|
|
static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf)
|
|
{
|
|
uint8_t event_code, media_status;
|
|
|
|
media_status = 0;
|
|
if (s->tray_open) {
|
|
media_status = MS_TRAY_OPEN;
|
|
} else if (bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
media_status = MS_MEDIA_PRESENT;
|
|
}
|
|
|
|
/* Event notification descriptor */
|
|
event_code = MEC_NO_CHANGE;
|
|
if (media_status != MS_TRAY_OPEN) {
|
|
if (s->media_event) {
|
|
event_code = MEC_NEW_MEDIA;
|
|
s->media_event = false;
|
|
} else if (s->eject_request) {
|
|
event_code = MEC_EJECT_REQUESTED;
|
|
s->eject_request = false;
|
|
}
|
|
}
|
|
|
|
outbuf[0] = event_code;
|
|
outbuf[1] = media_status;
|
|
|
|
/* These fields are reserved, just clear them. */
|
|
outbuf[2] = 0;
|
|
outbuf[3] = 0;
|
|
return 4;
|
|
}
|
|
|
|
static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r,
|
|
uint8_t *outbuf)
|
|
{
|
|
int size;
|
|
uint8_t *buf = r->req.cmd.buf;
|
|
uint8_t notification_class_request = buf[4];
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return -1;
|
|
}
|
|
if ((buf[1] & 1) == 0) {
|
|
/* asynchronous */
|
|
return -1;
|
|
}
|
|
|
|
size = 4;
|
|
outbuf[0] = outbuf[1] = 0;
|
|
outbuf[3] = 1 << GESN_MEDIA; /* supported events */
|
|
if (notification_class_request & (1 << GESN_MEDIA)) {
|
|
outbuf[2] = GESN_MEDIA;
|
|
size += scsi_event_status_media(s, &outbuf[size]);
|
|
} else {
|
|
outbuf[2] = 0x80;
|
|
}
|
|
stw_be_p(outbuf, size - 4);
|
|
return size;
|
|
}
|
|
|
|
static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf)
|
|
{
|
|
int current;
|
|
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return -1;
|
|
}
|
|
current = media_is_dvd(s) ? MMC_PROFILE_DVD_ROM : MMC_PROFILE_CD_ROM;
|
|
memset(outbuf, 0, 40);
|
|
stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */
|
|
stw_be_p(&outbuf[6], current);
|
|
/* outbuf[8] - outbuf[19]: Feature 0 - Profile list */
|
|
outbuf[10] = 0x03; /* persistent, current */
|
|
outbuf[11] = 8; /* two profiles */
|
|
stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM);
|
|
outbuf[14] = (current == MMC_PROFILE_DVD_ROM);
|
|
stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM);
|
|
outbuf[18] = (current == MMC_PROFILE_CD_ROM);
|
|
/* outbuf[20] - outbuf[31]: Feature 1 - Core feature */
|
|
stw_be_p(&outbuf[20], 1);
|
|
outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */
|
|
outbuf[23] = 8;
|
|
stl_be_p(&outbuf[24], 1); /* SCSI */
|
|
outbuf[28] = 1; /* DBE = 1, mandatory */
|
|
/* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */
|
|
stw_be_p(&outbuf[32], 3);
|
|
outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */
|
|
outbuf[35] = 4;
|
|
outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */
|
|
/* TODO: Random readable, CD read, DVD read, drive serial number,
|
|
power management */
|
|
return 40;
|
|
}
|
|
|
|
static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf)
|
|
{
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return -1;
|
|
}
|
|
memset(outbuf, 0, 8);
|
|
outbuf[5] = 1; /* CD-ROM */
|
|
return 8;
|
|
}
|
|
|
|
static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
|
|
int page_control)
|
|
{
|
|
static const int mode_sense_valid[0x3f] = {
|
|
[MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK),
|
|
[MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK),
|
|
[MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
|
|
[MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM),
|
|
[MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM),
|
|
[MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM),
|
|
};
|
|
|
|
uint8_t *p = *p_outbuf + 2;
|
|
int length;
|
|
|
|
if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If Changeable Values are requested, a mask denoting those mode parameters
|
|
* that are changeable shall be returned. As we currently don't support
|
|
* parameter changes via MODE_SELECT all bits are returned set to zero.
|
|
* The buffer was already menset to zero by the caller of this function.
|
|
*
|
|
* The offsets here are off by two compared to the descriptions in the
|
|
* SCSI specs, because those include a 2-byte header. This is unfortunate,
|
|
* but it is done so that offsets are consistent within our implementation
|
|
* of MODE SENSE and MODE SELECT. MODE SELECT has to deal with both
|
|
* 2-byte and 4-byte headers.
|
|
*/
|
|
switch (page) {
|
|
case MODE_PAGE_HD_GEOMETRY:
|
|
length = 0x16;
|
|
if (page_control == 1) { /* Changeable Values */
|
|
break;
|
|
}
|
|
/* if a geometry hint is available, use it */
|
|
p[0] = (s->qdev.conf.cyls >> 16) & 0xff;
|
|
p[1] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[2] = s->qdev.conf.cyls & 0xff;
|
|
p[3] = s->qdev.conf.heads & 0xff;
|
|
/* Write precomp start cylinder, disabled */
|
|
p[4] = (s->qdev.conf.cyls >> 16) & 0xff;
|
|
p[5] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[6] = s->qdev.conf.cyls & 0xff;
|
|
/* Reduced current start cylinder, disabled */
|
|
p[7] = (s->qdev.conf.cyls >> 16) & 0xff;
|
|
p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[9] = s->qdev.conf.cyls & 0xff;
|
|
/* Device step rate [ns], 200ns */
|
|
p[10] = 0;
|
|
p[11] = 200;
|
|
/* Landing zone cylinder */
|
|
p[12] = 0xff;
|
|
p[13] = 0xff;
|
|
p[14] = 0xff;
|
|
/* Medium rotation rate [rpm], 5400 rpm */
|
|
p[18] = (5400 >> 8) & 0xff;
|
|
p[19] = 5400 & 0xff;
|
|
break;
|
|
|
|
case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
|
|
length = 0x1e;
|
|
if (page_control == 1) { /* Changeable Values */
|
|
break;
|
|
}
|
|
/* Transfer rate [kbit/s], 5Mbit/s */
|
|
p[0] = 5000 >> 8;
|
|
p[1] = 5000 & 0xff;
|
|
/* if a geometry hint is available, use it */
|
|
p[2] = s->qdev.conf.heads & 0xff;
|
|
p[3] = s->qdev.conf.secs & 0xff;
|
|
p[4] = s->qdev.blocksize >> 8;
|
|
p[6] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[7] = s->qdev.conf.cyls & 0xff;
|
|
/* Write precomp start cylinder, disabled */
|
|
p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[9] = s->qdev.conf.cyls & 0xff;
|
|
/* Reduced current start cylinder, disabled */
|
|
p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
|
|
p[11] = s->qdev.conf.cyls & 0xff;
|
|
/* Device step rate [100us], 100us */
|
|
p[12] = 0;
|
|
p[13] = 1;
|
|
/* Device step pulse width [us], 1us */
|
|
p[14] = 1;
|
|
/* Device head settle delay [100us], 100us */
|
|
p[15] = 0;
|
|
p[16] = 1;
|
|
/* Motor on delay [0.1s], 0.1s */
|
|
p[17] = 1;
|
|
/* Motor off delay [0.1s], 0.1s */
|
|
p[18] = 1;
|
|
/* Medium rotation rate [rpm], 5400 rpm */
|
|
p[26] = (5400 >> 8) & 0xff;
|
|
p[27] = 5400 & 0xff;
|
|
break;
|
|
|
|
case MODE_PAGE_CACHING:
|
|
length = 0x12;
|
|
if (page_control == 1 || /* Changeable Values */
|
|
bdrv_enable_write_cache(s->qdev.conf.bs)) {
|
|
p[0] = 4; /* WCE */
|
|
}
|
|
break;
|
|
|
|
case MODE_PAGE_R_W_ERROR:
|
|
length = 10;
|
|
if (page_control == 1) { /* Changeable Values */
|
|
break;
|
|
}
|
|
p[0] = 0x80; /* Automatic Write Reallocation Enabled */
|
|
if (s->qdev.type == TYPE_ROM) {
|
|
p[1] = 0x20; /* Read Retry Count */
|
|
}
|
|
break;
|
|
|
|
case MODE_PAGE_AUDIO_CTL:
|
|
length = 14;
|
|
break;
|
|
|
|
case MODE_PAGE_CAPABILITIES:
|
|
length = 0x14;
|
|
if (page_control == 1) { /* Changeable Values */
|
|
break;
|
|
}
|
|
|
|
p[0] = 0x3b; /* CD-R & CD-RW read */
|
|
p[1] = 0; /* Writing not supported */
|
|
p[2] = 0x7f; /* Audio, composite, digital out,
|
|
mode 2 form 1&2, multi session */
|
|
p[3] = 0xff; /* CD DA, DA accurate, RW supported,
|
|
RW corrected, C2 errors, ISRC,
|
|
UPC, Bar code */
|
|
p[4] = 0x2d | (s->tray_locked ? 2 : 0);
|
|
/* Locking supported, jumper present, eject, tray */
|
|
p[5] = 0; /* no volume & mute control, no
|
|
changer */
|
|
p[6] = (50 * 176) >> 8; /* 50x read speed */
|
|
p[7] = (50 * 176) & 0xff;
|
|
p[8] = 2 >> 8; /* Two volume levels */
|
|
p[9] = 2 & 0xff;
|
|
p[10] = 2048 >> 8; /* 2M buffer */
|
|
p[11] = 2048 & 0xff;
|
|
p[12] = (16 * 176) >> 8; /* 16x read speed current */
|
|
p[13] = (16 * 176) & 0xff;
|
|
p[16] = (16 * 176) >> 8; /* 16x write speed */
|
|
p[17] = (16 * 176) & 0xff;
|
|
p[18] = (16 * 176) >> 8; /* 16x write speed current */
|
|
p[19] = (16 * 176) & 0xff;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
assert(length < 256);
|
|
(*p_outbuf)[0] = page;
|
|
(*p_outbuf)[1] = length;
|
|
*p_outbuf += length + 2;
|
|
return length + 2;
|
|
}
|
|
|
|
static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
uint64_t nb_sectors;
|
|
bool dbd;
|
|
int page, buflen, ret, page_control;
|
|
uint8_t *p;
|
|
uint8_t dev_specific_param;
|
|
|
|
dbd = (r->req.cmd.buf[1] & 0x8) != 0;
|
|
page = r->req.cmd.buf[2] & 0x3f;
|
|
page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
|
|
DPRINTF("Mode Sense(%d) (page %d, xfer %zd, page_control %d)\n",
|
|
(r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, r->req.cmd.xfer, page_control);
|
|
memset(outbuf, 0, r->req.cmd.xfer);
|
|
p = outbuf;
|
|
|
|
if (s->qdev.type == TYPE_DISK) {
|
|
dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0;
|
|
if (bdrv_is_read_only(s->qdev.conf.bs)) {
|
|
dev_specific_param |= 0x80; /* Readonly. */
|
|
}
|
|
} else {
|
|
/* MMC prescribes that CD/DVD drives have no block descriptors,
|
|
* and defines no device-specific parameter. */
|
|
dev_specific_param = 0x00;
|
|
dbd = true;
|
|
}
|
|
|
|
if (r->req.cmd.buf[0] == MODE_SENSE) {
|
|
p[1] = 0; /* Default media type. */
|
|
p[2] = dev_specific_param;
|
|
p[3] = 0; /* Block descriptor length. */
|
|
p += 4;
|
|
} else { /* MODE_SENSE_10 */
|
|
p[2] = 0; /* Default media type. */
|
|
p[3] = dev_specific_param;
|
|
p[6] = p[7] = 0; /* Block descriptor length. */
|
|
p += 8;
|
|
}
|
|
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
if (!dbd && nb_sectors) {
|
|
if (r->req.cmd.buf[0] == MODE_SENSE) {
|
|
outbuf[3] = 8; /* Block descriptor length */
|
|
} else { /* MODE_SENSE_10 */
|
|
outbuf[7] = 8; /* Block descriptor length */
|
|
}
|
|
nb_sectors /= (s->qdev.blocksize / 512);
|
|
if (nb_sectors > 0xffffff) {
|
|
nb_sectors = 0;
|
|
}
|
|
p[0] = 0; /* media density code */
|
|
p[1] = (nb_sectors >> 16) & 0xff;
|
|
p[2] = (nb_sectors >> 8) & 0xff;
|
|
p[3] = nb_sectors & 0xff;
|
|
p[4] = 0; /* reserved */
|
|
p[5] = 0; /* bytes 5-7 are the sector size in bytes */
|
|
p[6] = s->qdev.blocksize >> 8;
|
|
p[7] = 0;
|
|
p += 8;
|
|
}
|
|
|
|
if (page_control == 3) {
|
|
/* Saved Values */
|
|
scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
|
|
return -1;
|
|
}
|
|
|
|
if (page == 0x3f) {
|
|
for (page = 0; page <= 0x3e; page++) {
|
|
mode_sense_page(s, page, &p, page_control);
|
|
}
|
|
} else {
|
|
ret = mode_sense_page(s, page, &p, page_control);
|
|
if (ret == -1) {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
buflen = p - outbuf;
|
|
/*
|
|
* The mode data length field specifies the length in bytes of the
|
|
* following data that is available to be transferred. The mode data
|
|
* length does not include itself.
|
|
*/
|
|
if (r->req.cmd.buf[0] == MODE_SENSE) {
|
|
outbuf[0] = buflen - 1;
|
|
} else { /* MODE_SENSE_10 */
|
|
outbuf[0] = ((buflen - 2) >> 8) & 0xff;
|
|
outbuf[1] = (buflen - 2) & 0xff;
|
|
}
|
|
return buflen;
|
|
}
|
|
|
|
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
|
|
int start_track, format, msf, toclen;
|
|
uint64_t nb_sectors;
|
|
|
|
msf = req->cmd.buf[1] & 2;
|
|
format = req->cmd.buf[2] & 0xf;
|
|
start_track = req->cmd.buf[6];
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
|
|
nb_sectors /= s->qdev.blocksize / 512;
|
|
switch (format) {
|
|
case 0:
|
|
toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
|
|
break;
|
|
case 1:
|
|
/* multi session : only a single session defined */
|
|
toclen = 12;
|
|
memset(outbuf, 0, 12);
|
|
outbuf[1] = 0x0a;
|
|
outbuf[2] = 0x01;
|
|
outbuf[3] = 0x01;
|
|
break;
|
|
case 2:
|
|
toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
return toclen;
|
|
}
|
|
|
|
static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
|
|
{
|
|
SCSIRequest *req = &r->req;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
|
|
bool start = req->cmd.buf[4] & 1;
|
|
bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */
|
|
int pwrcnd = req->cmd.buf[4] & 0xf0;
|
|
|
|
if (pwrcnd) {
|
|
/* eject/load only happens for power condition == 0 */
|
|
return 0;
|
|
}
|
|
|
|
if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) {
|
|
if (!start && !s->tray_open && s->tray_locked) {
|
|
scsi_check_condition(r,
|
|
bdrv_is_inserted(s->qdev.conf.bs)
|
|
? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED)
|
|
: SENSE_CODE(NOT_READY_REMOVAL_PREVENTED));
|
|
return -1;
|
|
}
|
|
|
|
if (s->tray_open != !start) {
|
|
bdrv_eject(s->qdev.conf.bs, !start);
|
|
s->tray_open = !start;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void scsi_disk_emulate_read_data(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
int buflen = r->iov.iov_len;
|
|
|
|
if (buflen) {
|
|
DPRINTF("Read buf_len=%d\n", buflen);
|
|
r->iov.iov_len = 0;
|
|
r->started = true;
|
|
scsi_req_data(&r->req, buflen);
|
|
return;
|
|
}
|
|
|
|
/* This also clears the sense buffer for REQUEST SENSE. */
|
|
scsi_req_complete(&r->req, GOOD);
|
|
}
|
|
|
|
static int scsi_disk_check_mode_select(SCSIDiskState *s, int page,
|
|
uint8_t *inbuf, int inlen)
|
|
{
|
|
uint8_t mode_current[SCSI_MAX_MODE_LEN];
|
|
uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
|
|
uint8_t *p;
|
|
int len, expected_len, changeable_len, i;
|
|
|
|
/* The input buffer does not include the page header, so it is
|
|
* off by 2 bytes.
|
|
*/
|
|
expected_len = inlen + 2;
|
|
if (expected_len > SCSI_MAX_MODE_LEN) {
|
|
return -1;
|
|
}
|
|
|
|
p = mode_current;
|
|
memset(mode_current, 0, inlen + 2);
|
|
len = mode_sense_page(s, page, &p, 0);
|
|
if (len < 0 || len != expected_len) {
|
|
return -1;
|
|
}
|
|
|
|
p = mode_changeable;
|
|
memset(mode_changeable, 0, inlen + 2);
|
|
changeable_len = mode_sense_page(s, page, &p, 1);
|
|
assert(changeable_len == len);
|
|
|
|
/* Check that unchangeable bits are the same as what MODE SENSE
|
|
* would return.
|
|
*/
|
|
for (i = 2; i < len; i++) {
|
|
if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p)
|
|
{
|
|
switch (page) {
|
|
case MODE_PAGE_CACHING:
|
|
bdrv_set_enable_write_cache(s->qdev.conf.bs, (p[0] & 4) != 0);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
|
|
while (len > 0) {
|
|
int page, subpage, page_len;
|
|
|
|
/* Parse both possible formats for the mode page headers. */
|
|
page = p[0] & 0x3f;
|
|
if (p[0] & 0x40) {
|
|
if (len < 4) {
|
|
goto invalid_param_len;
|
|
}
|
|
subpage = p[1];
|
|
page_len = lduw_be_p(&p[2]);
|
|
p += 4;
|
|
len -= 4;
|
|
} else {
|
|
if (len < 2) {
|
|
goto invalid_param_len;
|
|
}
|
|
subpage = 0;
|
|
page_len = p[1];
|
|
p += 2;
|
|
len -= 2;
|
|
}
|
|
|
|
if (subpage) {
|
|
goto invalid_param;
|
|
}
|
|
if (page_len > len) {
|
|
goto invalid_param_len;
|
|
}
|
|
|
|
if (!change) {
|
|
if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) {
|
|
goto invalid_param;
|
|
}
|
|
} else {
|
|
scsi_disk_apply_mode_select(s, page, p);
|
|
}
|
|
|
|
p += page_len;
|
|
len -= page_len;
|
|
}
|
|
return 0;
|
|
|
|
invalid_param:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
|
|
return -1;
|
|
|
|
invalid_param_len:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
|
|
return -1;
|
|
}
|
|
|
|
static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf)
|
|
{
|
|
uint8_t *p = inbuf;
|
|
int cmd = r->req.cmd.buf[0];
|
|
int len = r->req.cmd.xfer;
|
|
int hdr_len = (cmd == MODE_SELECT ? 4 : 8);
|
|
int bd_len;
|
|
int pass;
|
|
|
|
/* We only support PF=1, SP=0. */
|
|
if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
|
|
goto invalid_field;
|
|
}
|
|
|
|
if (len < hdr_len) {
|
|
goto invalid_param_len;
|
|
}
|
|
|
|
bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6]));
|
|
len -= hdr_len;
|
|
p += hdr_len;
|
|
if (len < bd_len) {
|
|
goto invalid_param_len;
|
|
}
|
|
if (bd_len != 0 && bd_len != 8) {
|
|
goto invalid_param;
|
|
}
|
|
|
|
len -= bd_len;
|
|
p += bd_len;
|
|
|
|
/* Ensure no change is made if there is an error! */
|
|
for (pass = 0; pass < 2; pass++) {
|
|
if (mode_select_pages(r, p, len, pass == 1) < 0) {
|
|
assert(pass == 0);
|
|
return;
|
|
}
|
|
}
|
|
scsi_req_complete(&r->req, GOOD);
|
|
return;
|
|
|
|
invalid_param:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
|
|
return;
|
|
|
|
invalid_param_len:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
|
|
return;
|
|
|
|
invalid_field:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
return;
|
|
}
|
|
|
|
typedef struct UnmapCBData {
|
|
SCSIDiskReq *r;
|
|
uint8_t *inbuf;
|
|
int count;
|
|
} UnmapCBData;
|
|
|
|
static void scsi_unmap_complete(void *opaque, int ret)
|
|
{
|
|
UnmapCBData *data = opaque;
|
|
SCSIDiskReq *r = data->r;
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
|
|
uint64_t sector_num;
|
|
uint32 nb_sectors;
|
|
|
|
r->req.aiocb = NULL;
|
|
if (ret < 0) {
|
|
if (scsi_handle_rw_error(r, -ret)) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (data->count > 0 && !r->req.io_canceled) {
|
|
sector_num = ldq_be_p(&data->inbuf[0]);
|
|
nb_sectors = ldl_be_p(&data->inbuf[8]) & 0xffffffffULL;
|
|
if (sector_num > sector_num + nb_sectors ||
|
|
sector_num + nb_sectors - 1 > s->qdev.max_lba) {
|
|
scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
|
|
goto done;
|
|
}
|
|
|
|
r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
|
|
sector_num * (s->qdev.blocksize / 512),
|
|
nb_sectors * (s->qdev.blocksize / 512),
|
|
scsi_unmap_complete, data);
|
|
data->count--;
|
|
data->inbuf += 16;
|
|
return;
|
|
}
|
|
|
|
done:
|
|
if (data->count == 0) {
|
|
scsi_req_complete(&r->req, GOOD);
|
|
}
|
|
if (!r->req.io_canceled) {
|
|
scsi_req_unref(&r->req);
|
|
}
|
|
g_free(data);
|
|
}
|
|
|
|
static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf)
|
|
{
|
|
uint8_t *p = inbuf;
|
|
int len = r->req.cmd.xfer;
|
|
UnmapCBData *data;
|
|
|
|
if (len < 8) {
|
|
goto invalid_param_len;
|
|
}
|
|
if (len < lduw_be_p(&p[0]) + 2) {
|
|
goto invalid_param_len;
|
|
}
|
|
if (len < lduw_be_p(&p[2]) + 8) {
|
|
goto invalid_param_len;
|
|
}
|
|
if (lduw_be_p(&p[2]) & 15) {
|
|
goto invalid_param_len;
|
|
}
|
|
|
|
data = g_new0(UnmapCBData, 1);
|
|
data->r = r;
|
|
data->inbuf = &p[8];
|
|
data->count = lduw_be_p(&p[2]) >> 4;
|
|
|
|
/* The matching unref is in scsi_unmap_complete, before data is freed. */
|
|
scsi_req_ref(&r->req);
|
|
scsi_unmap_complete(data, 0);
|
|
return;
|
|
|
|
invalid_param_len:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
|
|
return;
|
|
}
|
|
|
|
static void scsi_disk_emulate_write_data(SCSIRequest *req)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
|
|
if (r->iov.iov_len) {
|
|
int buflen = r->iov.iov_len;
|
|
DPRINTF("Write buf_len=%d\n", buflen);
|
|
r->iov.iov_len = 0;
|
|
scsi_req_data(&r->req, buflen);
|
|
return;
|
|
}
|
|
|
|
switch (req->cmd.buf[0]) {
|
|
case MODE_SELECT:
|
|
case MODE_SELECT_10:
|
|
/* This also clears the sense buffer for REQUEST SENSE. */
|
|
scsi_disk_emulate_mode_select(r, r->iov.iov_base);
|
|
break;
|
|
|
|
case UNMAP:
|
|
scsi_disk_emulate_unmap(r, r->iov.iov_base);
|
|
break;
|
|
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
|
|
uint64_t nb_sectors;
|
|
uint8_t *outbuf;
|
|
int buflen;
|
|
|
|
switch (req->cmd.buf[0]) {
|
|
case INQUIRY:
|
|
case MODE_SENSE:
|
|
case MODE_SENSE_10:
|
|
case RESERVE:
|
|
case RESERVE_10:
|
|
case RELEASE:
|
|
case RELEASE_10:
|
|
case START_STOP:
|
|
case ALLOW_MEDIUM_REMOVAL:
|
|
case GET_CONFIGURATION:
|
|
case GET_EVENT_STATUS_NOTIFICATION:
|
|
case MECHANISM_STATUS:
|
|
case REQUEST_SENSE:
|
|
break;
|
|
|
|
default:
|
|
if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
|
|
return 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (!r->iov.iov_base) {
|
|
/*
|
|
* FIXME: we shouldn't return anything bigger than 4k, but the code
|
|
* requires the buffer to be as big as req->cmd.xfer in several
|
|
* places. So, do not allow CDBs with a very large ALLOCATION
|
|
* LENGTH. The real fix would be to modify scsi_read_data and
|
|
* dma_buf_read, so that they return data beyond the buflen
|
|
* as all zeros.
|
|
*/
|
|
if (req->cmd.xfer > 65536) {
|
|
goto illegal_request;
|
|
}
|
|
r->buflen = MAX(4096, req->cmd.xfer);
|
|
r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
|
|
}
|
|
|
|
buflen = req->cmd.xfer;
|
|
outbuf = r->iov.iov_base;
|
|
switch (req->cmd.buf[0]) {
|
|
case TEST_UNIT_READY:
|
|
assert(!s->tray_open && bdrv_is_inserted(s->qdev.conf.bs));
|
|
break;
|
|
case INQUIRY:
|
|
buflen = scsi_disk_emulate_inquiry(req, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case MODE_SENSE:
|
|
case MODE_SENSE_10:
|
|
buflen = scsi_disk_emulate_mode_sense(r, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case READ_TOC:
|
|
buflen = scsi_disk_emulate_read_toc(req, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case RESERVE:
|
|
if (req->cmd.buf[1] & 1) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case RESERVE_10:
|
|
if (req->cmd.buf[1] & 3) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case RELEASE:
|
|
if (req->cmd.buf[1] & 1) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case RELEASE_10:
|
|
if (req->cmd.buf[1] & 3) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case START_STOP:
|
|
if (scsi_disk_emulate_start_stop(r) < 0) {
|
|
return 0;
|
|
}
|
|
break;
|
|
case ALLOW_MEDIUM_REMOVAL:
|
|
s->tray_locked = req->cmd.buf[4] & 1;
|
|
bdrv_lock_medium(s->qdev.conf.bs, req->cmd.buf[4] & 1);
|
|
break;
|
|
case READ_CAPACITY_10:
|
|
/* The normal LEN field for this command is zero. */
|
|
memset(outbuf, 0, 8);
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
if (!nb_sectors) {
|
|
scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
|
|
return -1;
|
|
}
|
|
if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
|
|
goto illegal_request;
|
|
}
|
|
nb_sectors /= s->qdev.blocksize / 512;
|
|
/* Returned value is the address of the last sector. */
|
|
nb_sectors--;
|
|
/* Remember the new size for read/write sanity checking. */
|
|
s->qdev.max_lba = nb_sectors;
|
|
/* Clip to 2TB, instead of returning capacity modulo 2TB. */
|
|
if (nb_sectors > UINT32_MAX) {
|
|
nb_sectors = UINT32_MAX;
|
|
}
|
|
outbuf[0] = (nb_sectors >> 24) & 0xff;
|
|
outbuf[1] = (nb_sectors >> 16) & 0xff;
|
|
outbuf[2] = (nb_sectors >> 8) & 0xff;
|
|
outbuf[3] = nb_sectors & 0xff;
|
|
outbuf[4] = 0;
|
|
outbuf[5] = 0;
|
|
outbuf[6] = s->qdev.blocksize >> 8;
|
|
outbuf[7] = 0;
|
|
buflen = 8;
|
|
break;
|
|
case REQUEST_SENSE:
|
|
/* Just return "NO SENSE". */
|
|
buflen = scsi_build_sense(NULL, 0, outbuf, r->buflen,
|
|
(req->cmd.buf[1] & 1) == 0);
|
|
break;
|
|
case MECHANISM_STATUS:
|
|
buflen = scsi_emulate_mechanism_status(s, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case GET_CONFIGURATION:
|
|
buflen = scsi_get_configuration(s, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case GET_EVENT_STATUS_NOTIFICATION:
|
|
buflen = scsi_get_event_status_notification(s, r, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case READ_DISC_INFORMATION:
|
|
buflen = scsi_read_disc_information(s, r, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case READ_DVD_STRUCTURE:
|
|
buflen = scsi_read_dvd_structure(s, r, outbuf);
|
|
if (buflen < 0) {
|
|
goto illegal_request;
|
|
}
|
|
break;
|
|
case SERVICE_ACTION_IN_16:
|
|
/* Service Action In subcommands. */
|
|
if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
|
|
DPRINTF("SAI READ CAPACITY(16)\n");
|
|
memset(outbuf, 0, req->cmd.xfer);
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
if (!nb_sectors) {
|
|
scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
|
|
return -1;
|
|
}
|
|
if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
|
|
goto illegal_request;
|
|
}
|
|
nb_sectors /= s->qdev.blocksize / 512;
|
|
/* Returned value is the address of the last sector. */
|
|
nb_sectors--;
|
|
/* Remember the new size for read/write sanity checking. */
|
|
s->qdev.max_lba = nb_sectors;
|
|
outbuf[0] = (nb_sectors >> 56) & 0xff;
|
|
outbuf[1] = (nb_sectors >> 48) & 0xff;
|
|
outbuf[2] = (nb_sectors >> 40) & 0xff;
|
|
outbuf[3] = (nb_sectors >> 32) & 0xff;
|
|
outbuf[4] = (nb_sectors >> 24) & 0xff;
|
|
outbuf[5] = (nb_sectors >> 16) & 0xff;
|
|
outbuf[6] = (nb_sectors >> 8) & 0xff;
|
|
outbuf[7] = nb_sectors & 0xff;
|
|
outbuf[8] = 0;
|
|
outbuf[9] = 0;
|
|
outbuf[10] = s->qdev.blocksize >> 8;
|
|
outbuf[11] = 0;
|
|
outbuf[12] = 0;
|
|
outbuf[13] = get_physical_block_exp(&s->qdev.conf);
|
|
|
|
/* set TPE bit if the format supports discard */
|
|
if (s->qdev.conf.discard_granularity) {
|
|
outbuf[14] = 0x80;
|
|
}
|
|
|
|
/* Protection, exponent and lowest lba field left blank. */
|
|
buflen = req->cmd.xfer;
|
|
break;
|
|
}
|
|
DPRINTF("Unsupported Service Action In\n");
|
|
goto illegal_request;
|
|
case SYNCHRONIZE_CACHE:
|
|
/* The request is used as the AIO opaque value, so add a ref. */
|
|
scsi_req_ref(&r->req);
|
|
bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
|
|
r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
|
|
return 0;
|
|
case SEEK_10:
|
|
DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
|
|
if (r->req.cmd.lba > s->qdev.max_lba) {
|
|
goto illegal_lba;
|
|
}
|
|
break;
|
|
case MODE_SELECT:
|
|
DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
|
|
break;
|
|
case MODE_SELECT_10:
|
|
DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
|
|
break;
|
|
case UNMAP:
|
|
DPRINTF("Unmap (len %lu)\n", (long)r->req.cmd.xfer);
|
|
break;
|
|
case WRITE_SAME_10:
|
|
nb_sectors = lduw_be_p(&req->cmd.buf[7]);
|
|
goto write_same;
|
|
case WRITE_SAME_16:
|
|
nb_sectors = ldl_be_p(&req->cmd.buf[10]) & 0xffffffffULL;
|
|
write_same:
|
|
if (bdrv_is_read_only(s->qdev.conf.bs)) {
|
|
scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
|
|
return 0;
|
|
}
|
|
if (r->req.cmd.lba > r->req.cmd.lba + nb_sectors ||
|
|
r->req.cmd.lba + nb_sectors - 1 > s->qdev.max_lba) {
|
|
goto illegal_lba;
|
|
}
|
|
|
|
/*
|
|
* We only support WRITE SAME with the unmap bit set for now.
|
|
*/
|
|
if (!(req->cmd.buf[1] & 0x8)) {
|
|
goto illegal_request;
|
|
}
|
|
|
|
/* The request is used as the AIO opaque value, so add a ref. */
|
|
scsi_req_ref(&r->req);
|
|
r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
|
|
r->req.cmd.lba * (s->qdev.blocksize / 512),
|
|
nb_sectors * (s->qdev.blocksize / 512),
|
|
scsi_aio_complete, r);
|
|
return 0;
|
|
default:
|
|
DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
|
|
return 0;
|
|
}
|
|
assert(!r->req.aiocb);
|
|
r->iov.iov_len = MIN(buflen, req->cmd.xfer);
|
|
if (r->iov.iov_len == 0) {
|
|
scsi_req_complete(&r->req, GOOD);
|
|
}
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
assert(r->iov.iov_len == req->cmd.xfer);
|
|
return -r->iov.iov_len;
|
|
} else {
|
|
return r->iov.iov_len;
|
|
}
|
|
|
|
illegal_request:
|
|
if (r->req.status == -1) {
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
}
|
|
return 0;
|
|
|
|
illegal_lba:
|
|
scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
|
|
return 0;
|
|
}
|
|
|
|
/* Execute a scsi command. Returns the length of the data expected by the
|
|
command. This will be Positive for data transfers from the device
|
|
(eg. disk reads), negative for transfers to the device (eg. disk writes),
|
|
and zero if the command does not transfer any data. */
|
|
|
|
static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
|
|
{
|
|
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
|
|
int32_t len;
|
|
uint8_t command;
|
|
|
|
command = buf[0];
|
|
|
|
if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
|
|
return 0;
|
|
}
|
|
|
|
switch (command) {
|
|
case READ_6:
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
len = r->req.cmd.xfer / s->qdev.blocksize;
|
|
DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
|
|
if (r->req.cmd.buf[1] & 0xe0) {
|
|
goto illegal_request;
|
|
}
|
|
if (r->req.cmd.lba > r->req.cmd.lba + len ||
|
|
r->req.cmd.lba + len - 1 > s->qdev.max_lba) {
|
|
goto illegal_lba;
|
|
}
|
|
r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
|
|
r->sector_count = len * (s->qdev.blocksize / 512);
|
|
break;
|
|
case WRITE_6:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
case WRITE_VERIFY_10:
|
|
case WRITE_VERIFY_12:
|
|
case WRITE_VERIFY_16:
|
|
if (bdrv_is_read_only(s->qdev.conf.bs)) {
|
|
scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
|
|
return 0;
|
|
}
|
|
/* fallthrough */
|
|
case VERIFY_10:
|
|
case VERIFY_12:
|
|
case VERIFY_16:
|
|
len = r->req.cmd.xfer / s->qdev.blocksize;
|
|
DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
|
|
(command & 0xe) == 0xe ? "And Verify " : "",
|
|
r->req.cmd.lba, len);
|
|
if (r->req.cmd.buf[1] & 0xe0) {
|
|
goto illegal_request;
|
|
}
|
|
if (r->req.cmd.lba > r->req.cmd.lba + len ||
|
|
r->req.cmd.lba + len - 1 > s->qdev.max_lba) {
|
|
goto illegal_lba;
|
|
}
|
|
r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
|
|
r->sector_count = len * (s->qdev.blocksize / 512);
|
|
break;
|
|
default:
|
|
abort();
|
|
illegal_request:
|
|
scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
|
|
return 0;
|
|
illegal_lba:
|
|
scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
|
|
return 0;
|
|
}
|
|
if (r->sector_count == 0) {
|
|
scsi_req_complete(&r->req, GOOD);
|
|
}
|
|
assert(r->iov.iov_len == 0);
|
|
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
|
|
return -r->sector_count * 512;
|
|
} else {
|
|
return r->sector_count * 512;
|
|
}
|
|
}
|
|
|
|
static void scsi_disk_reset(DeviceState *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev);
|
|
uint64_t nb_sectors;
|
|
|
|
scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
|
|
|
|
bdrv_get_geometry(s->qdev.conf.bs, &nb_sectors);
|
|
nb_sectors /= s->qdev.blocksize / 512;
|
|
if (nb_sectors) {
|
|
nb_sectors--;
|
|
}
|
|
s->qdev.max_lba = nb_sectors;
|
|
}
|
|
|
|
static void scsi_destroy(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
|
|
scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE));
|
|
blockdev_mark_auto_del(s->qdev.conf.bs);
|
|
}
|
|
|
|
static void scsi_disk_resize_cb(void *opaque)
|
|
{
|
|
SCSIDiskState *s = opaque;
|
|
|
|
/* SPC lists this sense code as available only for
|
|
* direct-access devices.
|
|
*/
|
|
if (s->qdev.type == TYPE_DISK) {
|
|
scsi_device_set_ua(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
|
|
scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
|
|
}
|
|
}
|
|
|
|
static void scsi_cd_change_media_cb(void *opaque, bool load)
|
|
{
|
|
SCSIDiskState *s = opaque;
|
|
|
|
/*
|
|
* When a CD gets changed, we have to report an ejected state and
|
|
* then a loaded state to guests so that they detect tray
|
|
* open/close and media change events. Guests that do not use
|
|
* GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
|
|
* states rely on this behavior.
|
|
*
|
|
* media_changed governs the state machine used for unit attention
|
|
* report. media_event is used by GET EVENT STATUS NOTIFICATION.
|
|
*/
|
|
s->media_changed = load;
|
|
s->tray_open = !load;
|
|
scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM));
|
|
s->media_event = true;
|
|
s->eject_request = false;
|
|
}
|
|
|
|
static void scsi_cd_eject_request_cb(void *opaque, bool force)
|
|
{
|
|
SCSIDiskState *s = opaque;
|
|
|
|
s->eject_request = true;
|
|
if (force) {
|
|
s->tray_locked = false;
|
|
}
|
|
}
|
|
|
|
static bool scsi_cd_is_tray_open(void *opaque)
|
|
{
|
|
return ((SCSIDiskState *)opaque)->tray_open;
|
|
}
|
|
|
|
static bool scsi_cd_is_medium_locked(void *opaque)
|
|
{
|
|
return ((SCSIDiskState *)opaque)->tray_locked;
|
|
}
|
|
|
|
static const BlockDevOps scsi_disk_removable_block_ops = {
|
|
.change_media_cb = scsi_cd_change_media_cb,
|
|
.eject_request_cb = scsi_cd_eject_request_cb,
|
|
.is_tray_open = scsi_cd_is_tray_open,
|
|
.is_medium_locked = scsi_cd_is_medium_locked,
|
|
|
|
.resize_cb = scsi_disk_resize_cb,
|
|
};
|
|
|
|
static const BlockDevOps scsi_disk_block_ops = {
|
|
.resize_cb = scsi_disk_resize_cb,
|
|
};
|
|
|
|
static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
if (s->media_changed) {
|
|
s->media_changed = false;
|
|
scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED));
|
|
}
|
|
}
|
|
|
|
static int scsi_initfn(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
|
|
if (!s->qdev.conf.bs) {
|
|
error_report("drive property not set");
|
|
return -1;
|
|
}
|
|
|
|
if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) &&
|
|
!bdrv_is_inserted(s->qdev.conf.bs)) {
|
|
error_report("Device needs media, but drive is empty");
|
|
return -1;
|
|
}
|
|
|
|
blkconf_serial(&s->qdev.conf, &s->serial);
|
|
if (dev->type == TYPE_DISK
|
|
&& blkconf_geometry(&dev->conf, NULL, 65535, 255, 255) < 0) {
|
|
return -1;
|
|
}
|
|
|
|
if (!s->version) {
|
|
s->version = g_strdup(qemu_get_version());
|
|
}
|
|
if (!s->vendor) {
|
|
s->vendor = g_strdup("QEMU");
|
|
}
|
|
|
|
if (bdrv_is_sg(s->qdev.conf.bs)) {
|
|
error_report("unwanted /dev/sg*");
|
|
return -1;
|
|
}
|
|
|
|
if (s->features & (1 << SCSI_DISK_F_REMOVABLE)) {
|
|
bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_removable_block_ops, s);
|
|
} else {
|
|
bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_block_ops, s);
|
|
}
|
|
bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
|
|
|
|
bdrv_iostatus_enable(s->qdev.conf.bs);
|
|
add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static int scsi_hd_initfn(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
s->qdev.blocksize = s->qdev.conf.logical_block_size;
|
|
s->qdev.type = TYPE_DISK;
|
|
if (!s->product) {
|
|
s->product = g_strdup("QEMU HARDDISK");
|
|
}
|
|
return scsi_initfn(&s->qdev);
|
|
}
|
|
|
|
static int scsi_cd_initfn(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
s->qdev.blocksize = 2048;
|
|
s->qdev.type = TYPE_ROM;
|
|
s->features |= 1 << SCSI_DISK_F_REMOVABLE;
|
|
if (!s->product) {
|
|
s->product = g_strdup("QEMU CD-ROM");
|
|
}
|
|
return scsi_initfn(&s->qdev);
|
|
}
|
|
|
|
static int scsi_disk_initfn(SCSIDevice *dev)
|
|
{
|
|
DriveInfo *dinfo;
|
|
|
|
if (!dev->conf.bs) {
|
|
return scsi_initfn(dev); /* ... and die there */
|
|
}
|
|
|
|
dinfo = drive_get_by_blockdev(dev->conf.bs);
|
|
if (dinfo->media_cd) {
|
|
return scsi_cd_initfn(dev);
|
|
} else {
|
|
return scsi_hd_initfn(dev);
|
|
}
|
|
}
|
|
|
|
static const SCSIReqOps scsi_disk_emulate_reqops = {
|
|
.size = sizeof(SCSIDiskReq),
|
|
.free_req = scsi_free_request,
|
|
.send_command = scsi_disk_emulate_command,
|
|
.read_data = scsi_disk_emulate_read_data,
|
|
.write_data = scsi_disk_emulate_write_data,
|
|
.get_buf = scsi_get_buf,
|
|
};
|
|
|
|
static const SCSIReqOps scsi_disk_dma_reqops = {
|
|
.size = sizeof(SCSIDiskReq),
|
|
.free_req = scsi_free_request,
|
|
.send_command = scsi_disk_dma_command,
|
|
.read_data = scsi_read_data,
|
|
.write_data = scsi_write_data,
|
|
.cancel_io = scsi_cancel_io,
|
|
.get_buf = scsi_get_buf,
|
|
.load_request = scsi_disk_load_request,
|
|
.save_request = scsi_disk_save_request,
|
|
};
|
|
|
|
static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = {
|
|
[TEST_UNIT_READY] = &scsi_disk_emulate_reqops,
|
|
[INQUIRY] = &scsi_disk_emulate_reqops,
|
|
[MODE_SENSE] = &scsi_disk_emulate_reqops,
|
|
[MODE_SENSE_10] = &scsi_disk_emulate_reqops,
|
|
[START_STOP] = &scsi_disk_emulate_reqops,
|
|
[ALLOW_MEDIUM_REMOVAL] = &scsi_disk_emulate_reqops,
|
|
[READ_CAPACITY_10] = &scsi_disk_emulate_reqops,
|
|
[READ_TOC] = &scsi_disk_emulate_reqops,
|
|
[READ_DVD_STRUCTURE] = &scsi_disk_emulate_reqops,
|
|
[READ_DISC_INFORMATION] = &scsi_disk_emulate_reqops,
|
|
[GET_CONFIGURATION] = &scsi_disk_emulate_reqops,
|
|
[GET_EVENT_STATUS_NOTIFICATION] = &scsi_disk_emulate_reqops,
|
|
[MECHANISM_STATUS] = &scsi_disk_emulate_reqops,
|
|
[SERVICE_ACTION_IN_16] = &scsi_disk_emulate_reqops,
|
|
[REQUEST_SENSE] = &scsi_disk_emulate_reqops,
|
|
[SYNCHRONIZE_CACHE] = &scsi_disk_emulate_reqops,
|
|
[SEEK_10] = &scsi_disk_emulate_reqops,
|
|
[MODE_SELECT] = &scsi_disk_emulate_reqops,
|
|
[MODE_SELECT_10] = &scsi_disk_emulate_reqops,
|
|
[UNMAP] = &scsi_disk_emulate_reqops,
|
|
[WRITE_SAME_10] = &scsi_disk_emulate_reqops,
|
|
[WRITE_SAME_16] = &scsi_disk_emulate_reqops,
|
|
|
|
[READ_6] = &scsi_disk_dma_reqops,
|
|
[READ_10] = &scsi_disk_dma_reqops,
|
|
[READ_12] = &scsi_disk_dma_reqops,
|
|
[READ_16] = &scsi_disk_dma_reqops,
|
|
[VERIFY_10] = &scsi_disk_dma_reqops,
|
|
[VERIFY_12] = &scsi_disk_dma_reqops,
|
|
[VERIFY_16] = &scsi_disk_dma_reqops,
|
|
[WRITE_6] = &scsi_disk_dma_reqops,
|
|
[WRITE_10] = &scsi_disk_dma_reqops,
|
|
[WRITE_12] = &scsi_disk_dma_reqops,
|
|
[WRITE_16] = &scsi_disk_dma_reqops,
|
|
[WRITE_VERIFY_10] = &scsi_disk_dma_reqops,
|
|
[WRITE_VERIFY_12] = &scsi_disk_dma_reqops,
|
|
[WRITE_VERIFY_16] = &scsi_disk_dma_reqops,
|
|
};
|
|
|
|
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
|
|
uint8_t *buf, void *hba_private)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
|
|
SCSIRequest *req;
|
|
const SCSIReqOps *ops;
|
|
uint8_t command;
|
|
|
|
command = buf[0];
|
|
ops = scsi_disk_reqops_dispatch[command];
|
|
if (!ops) {
|
|
ops = &scsi_disk_emulate_reqops;
|
|
}
|
|
req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private);
|
|
|
|
#ifdef DEBUG_SCSI
|
|
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
|
|
{
|
|
int i;
|
|
for (i = 1; i < req->cmd.len; i++) {
|
|
printf(" 0x%02x", buf[i]);
|
|
}
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
return req;
|
|
}
|
|
|
|
#ifdef __linux__
|
|
static int get_device_type(SCSIDiskState *s)
|
|
{
|
|
BlockDriverState *bdrv = s->qdev.conf.bs;
|
|
uint8_t cmd[16];
|
|
uint8_t buf[36];
|
|
uint8_t sensebuf[8];
|
|
sg_io_hdr_t io_header;
|
|
int ret;
|
|
|
|
memset(cmd, 0, sizeof(cmd));
|
|
memset(buf, 0, sizeof(buf));
|
|
cmd[0] = INQUIRY;
|
|
cmd[4] = sizeof(buf);
|
|
|
|
memset(&io_header, 0, sizeof(io_header));
|
|
io_header.interface_id = 'S';
|
|
io_header.dxfer_direction = SG_DXFER_FROM_DEV;
|
|
io_header.dxfer_len = sizeof(buf);
|
|
io_header.dxferp = buf;
|
|
io_header.cmdp = cmd;
|
|
io_header.cmd_len = sizeof(cmd);
|
|
io_header.mx_sb_len = sizeof(sensebuf);
|
|
io_header.sbp = sensebuf;
|
|
io_header.timeout = 6000; /* XXX */
|
|
|
|
ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
|
|
if (ret < 0 || io_header.driver_status || io_header.host_status) {
|
|
return -1;
|
|
}
|
|
s->qdev.type = buf[0];
|
|
if (buf[1] & 0x80) {
|
|
s->features |= 1 << SCSI_DISK_F_REMOVABLE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int scsi_block_initfn(SCSIDevice *dev)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
|
|
int sg_version;
|
|
int rc;
|
|
|
|
if (!s->qdev.conf.bs) {
|
|
error_report("scsi-block: drive property not set");
|
|
return -1;
|
|
}
|
|
|
|
/* check we are using a driver managing SG_IO (version 3 and after) */
|
|
if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
|
|
sg_version < 30000) {
|
|
error_report("scsi-block: scsi generic interface too old");
|
|
return -1;
|
|
}
|
|
|
|
/* get device type from INQUIRY data */
|
|
rc = get_device_type(s);
|
|
if (rc < 0) {
|
|
error_report("scsi-block: INQUIRY failed");
|
|
return -1;
|
|
}
|
|
|
|
/* Make a guess for the block size, we'll fix it when the guest sends.
|
|
* READ CAPACITY. If they don't, they likely would assume these sizes
|
|
* anyway. (TODO: check in /sys).
|
|
*/
|
|
if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) {
|
|
s->qdev.blocksize = 2048;
|
|
} else {
|
|
s->qdev.blocksize = 512;
|
|
}
|
|
return scsi_initfn(&s->qdev);
|
|
}
|
|
|
|
static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
|
|
uint32_t lun, uint8_t *buf,
|
|
void *hba_private)
|
|
{
|
|
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
|
|
|
|
switch (buf[0]) {
|
|
case READ_6:
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
case VERIFY_10:
|
|
case VERIFY_12:
|
|
case VERIFY_16:
|
|
case WRITE_6:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
case WRITE_VERIFY_10:
|
|
case WRITE_VERIFY_12:
|
|
case WRITE_VERIFY_16:
|
|
/* If we are not using O_DIRECT, we might read stale data from the
|
|
* host cache if writes were made using other commands than these
|
|
* ones (such as WRITE SAME or EXTENDED COPY, etc.). So, without
|
|
* O_DIRECT everything must go through SG_IO.
|
|
*/
|
|
if (bdrv_get_flags(s->qdev.conf.bs) & BDRV_O_NOCACHE) {
|
|
break;
|
|
}
|
|
|
|
/* MMC writing cannot be done via pread/pwrite, because it sometimes
|
|
* involves writing beyond the maximum LBA or to negative LBA (lead-in).
|
|
* And once you do these writes, reading from the block device is
|
|
* unreliable, too. It is even possible that reads deliver random data
|
|
* from the host page cache (this is probably a Linux bug).
|
|
*
|
|
* We might use scsi_disk_dma_reqops as long as no writing commands are
|
|
* seen, but performance usually isn't paramount on optical media. So,
|
|
* just make scsi-block operate the same as scsi-generic for them.
|
|
*/
|
|
if (s->qdev.type != TYPE_ROM) {
|
|
return scsi_req_alloc(&scsi_disk_dma_reqops, &s->qdev, tag, lun,
|
|
hba_private);
|
|
}
|
|
}
|
|
|
|
return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
|
|
hba_private);
|
|
}
|
|
#endif
|
|
|
|
#define DEFINE_SCSI_DISK_PROPERTIES() \
|
|
DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf), \
|
|
DEFINE_PROP_STRING("ver", SCSIDiskState, version), \
|
|
DEFINE_PROP_STRING("serial", SCSIDiskState, serial), \
|
|
DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor), \
|
|
DEFINE_PROP_STRING("product", SCSIDiskState, product)
|
|
|
|
static Property scsi_hd_properties[] = {
|
|
DEFINE_SCSI_DISK_PROPERTIES(),
|
|
DEFINE_PROP_BIT("removable", SCSIDiskState, features,
|
|
SCSI_DISK_F_REMOVABLE, false),
|
|
DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
|
|
SCSI_DISK_F_DPOFUA, false),
|
|
DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
|
|
DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static const VMStateDescription vmstate_scsi_disk_state = {
|
|
.name = "scsi-disk",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState),
|
|
VMSTATE_BOOL(media_changed, SCSIDiskState),
|
|
VMSTATE_BOOL(media_event, SCSIDiskState),
|
|
VMSTATE_BOOL(eject_request, SCSIDiskState),
|
|
VMSTATE_BOOL(tray_open, SCSIDiskState),
|
|
VMSTATE_BOOL(tray_locked, SCSIDiskState),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
|
|
|
|
sc->init = scsi_hd_initfn;
|
|
sc->destroy = scsi_destroy;
|
|
sc->alloc_req = scsi_new_request;
|
|
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
|
|
dc->fw_name = "disk";
|
|
dc->desc = "virtual SCSI disk";
|
|
dc->reset = scsi_disk_reset;
|
|
dc->props = scsi_hd_properties;
|
|
dc->vmsd = &vmstate_scsi_disk_state;
|
|
}
|
|
|
|
static TypeInfo scsi_hd_info = {
|
|
.name = "scsi-hd",
|
|
.parent = TYPE_SCSI_DEVICE,
|
|
.instance_size = sizeof(SCSIDiskState),
|
|
.class_init = scsi_hd_class_initfn,
|
|
};
|
|
|
|
static Property scsi_cd_properties[] = {
|
|
DEFINE_SCSI_DISK_PROPERTIES(),
|
|
DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
|
|
|
|
sc->init = scsi_cd_initfn;
|
|
sc->destroy = scsi_destroy;
|
|
sc->alloc_req = scsi_new_request;
|
|
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
|
|
dc->fw_name = "disk";
|
|
dc->desc = "virtual SCSI CD-ROM";
|
|
dc->reset = scsi_disk_reset;
|
|
dc->props = scsi_cd_properties;
|
|
dc->vmsd = &vmstate_scsi_disk_state;
|
|
}
|
|
|
|
static TypeInfo scsi_cd_info = {
|
|
.name = "scsi-cd",
|
|
.parent = TYPE_SCSI_DEVICE,
|
|
.instance_size = sizeof(SCSIDiskState),
|
|
.class_init = scsi_cd_class_initfn,
|
|
};
|
|
|
|
#ifdef __linux__
|
|
static Property scsi_block_properties[] = {
|
|
DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.bs),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void scsi_block_class_initfn(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
|
|
|
|
sc->init = scsi_block_initfn;
|
|
sc->destroy = scsi_destroy;
|
|
sc->alloc_req = scsi_block_new_request;
|
|
dc->fw_name = "disk";
|
|
dc->desc = "SCSI block device passthrough";
|
|
dc->reset = scsi_disk_reset;
|
|
dc->props = scsi_block_properties;
|
|
dc->vmsd = &vmstate_scsi_disk_state;
|
|
}
|
|
|
|
static TypeInfo scsi_block_info = {
|
|
.name = "scsi-block",
|
|
.parent = TYPE_SCSI_DEVICE,
|
|
.instance_size = sizeof(SCSIDiskState),
|
|
.class_init = scsi_block_class_initfn,
|
|
};
|
|
#endif
|
|
|
|
static Property scsi_disk_properties[] = {
|
|
DEFINE_SCSI_DISK_PROPERTIES(),
|
|
DEFINE_PROP_BIT("removable", SCSIDiskState, features,
|
|
SCSI_DISK_F_REMOVABLE, false),
|
|
DEFINE_PROP_BIT("dpofua", SCSIDiskState, features,
|
|
SCSI_DISK_F_DPOFUA, false),
|
|
DEFINE_PROP_HEX64("wwn", SCSIDiskState, wwn, 0),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
|
|
|
|
sc->init = scsi_disk_initfn;
|
|
sc->destroy = scsi_destroy;
|
|
sc->alloc_req = scsi_new_request;
|
|
sc->unit_attention_reported = scsi_disk_unit_attention_reported;
|
|
dc->fw_name = "disk";
|
|
dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
|
|
dc->reset = scsi_disk_reset;
|
|
dc->props = scsi_disk_properties;
|
|
dc->vmsd = &vmstate_scsi_disk_state;
|
|
}
|
|
|
|
static TypeInfo scsi_disk_info = {
|
|
.name = "scsi-disk",
|
|
.parent = TYPE_SCSI_DEVICE,
|
|
.instance_size = sizeof(SCSIDiskState),
|
|
.class_init = scsi_disk_class_initfn,
|
|
};
|
|
|
|
static void scsi_disk_register_types(void)
|
|
{
|
|
type_register_static(&scsi_hd_info);
|
|
type_register_static(&scsi_cd_info);
|
|
#ifdef __linux__
|
|
type_register_static(&scsi_block_info);
|
|
#endif
|
|
type_register_static(&scsi_disk_info);
|
|
}
|
|
|
|
type_init(scsi_disk_register_types)
|