qemu/hw/arm
Guenter Roeck 616ec12d0f hw/arm/xilinx_zynq: Fix USB port instantiation
USB ports on Xilinx Zync must be instantiated as TYPE_CHIPIDEA to work.
Linux expects and checks various chipidea registers, which do not exist
with the basic ehci emulation. This patch series fixes the problem.

Without this patch, USB ports fail to instantiate under Linux.

ci_hdrc ci_hdrc.0: doesn't support host
ci_hdrc ci_hdrc.0: no supported roles

With this patch, USB ports are instantiated, and it is possible
to boot from USB drive.

ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
usb 1-1: new full-speed USB device number 2 using ci_hdrc
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64
usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 512, setting to 64
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200215122354.13706-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
..
allwinner-a10.c arm: allwinner: Wire up USB ports 2020-02-21 16:07:02 +00:00
armsse.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
armv7m.c hw/core/loader: Let load_elf() populate a field with CPU-specific flags 2020-01-29 19:28:52 +01:00
aspeed_ast2600.c hw/arm: ast2600: Wire up EHCI controllers 2020-02-13 14:14:55 +00:00
aspeed_soc.c hw/arm: ast2400/ast2500: Wire up EHCI controllers 2020-02-13 14:14:55 +00:00
aspeed.c arm/aspeed: use memdev for RAM 2020-02-19 16:49:54 +00:00
bcm2835_peripherals.c hw/arm/bcm2835_peripherals: Use the SYS_timer 2019-10-25 13:09:27 +01:00
bcm2836.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
boot.c Remove unnecessary cast when using the address_space API 2020-02-20 14:47:08 +01:00
collie.c arm/collie: use memdev for RAM 2020-02-19 16:49:54 +00:00
cubieboard.c arm/cubieboard: use memdev for RAM 2020-02-19 16:49:54 +00:00
digic_boards.c arm/digic_boards: use memdev for RAM 2020-02-19 16:49:54 +00:00
digic.c hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate 2019-09-03 16:20:34 +01:00
exynos4_boards.c Machine + x86 queue, 2019-09-03 2019-09-04 14:44:54 +01:00
exynos4210.c hw/arm/exynos4210: Connect serial port DMA busy signals with pl330 2020-01-23 16:34:15 +00:00
fsl-imx6.c i.MX: Add support for WDT on i.MX6 2020-02-13 14:14:52 +00:00
fsl-imx6ul.c hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate 2019-09-03 16:20:34 +01:00
fsl-imx7.c hw/arm: Replace global smp variables with machine smp properties 2019-07-05 17:08:03 -03:00
fsl-imx25.c i.MX: add an emulation for RNGC 2020-01-17 14:27:16 +00:00
fsl-imx31.c hw/arm/fsl-imx: Add the cpu as child of the SoC object 2019-09-03 16:20:34 +01:00
gumstix.c Include hw/hw.h exactly where needed 2019-08-16 13:31:52 +02:00
highbank.c arm/highbank: use memdev for RAM 2020-02-19 16:49:54 +00:00
imx25_pdk.c arm/imx25_pdk: use memdev for RAM 2020-02-19 16:49:55 +00:00
integratorcp.c hw/arm/integratorcp: Map the audio codec controller 2020-02-28 16:14:57 +00:00
Kconfig hw/arm/integratorcp: Map the audio codec controller 2020-02-28 16:14:57 +00:00
kzm.c arm/kzm: use memdev for RAM 2020-02-19 16:49:55 +00:00
mainstone.c mainstone: Make providing flash images non-mandatory 2020-02-21 16:07:00 +00:00
Makefile.objs hw/arm: Add the Netduino Plus 2 2020-01-17 14:09:29 +00:00
mcimx6ul-evk.c arm/mcimx6ul-evk: use memdev for RAM 2020-02-19 16:49:55 +00:00
mcimx7d-sabre.c arm/mcimx7d-sabre: use memdev for RAM 2020-02-19 16:49:55 +00:00
microbit.c Include hw/qdev-properties.h less 2019-08-16 13:31:53 +02:00
mps2-tz.c arm/mps2-tz: use memdev for RAM 2020-02-19 16:49:55 +00:00
mps2.c arm/mps2: use memdev for RAM 2020-02-19 16:49:55 +00:00
msf2-soc.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
msf2-som.c Include hw/qdev-properties.h less 2019-08-16 13:31:53 +02:00
musca.c hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory 2019-10-24 20:10:27 +02:00
musicpal.c arm/musicpal: use memdev for RAM 2020-02-19 16:49:56 +00:00
netduino2.c Include hw/qdev-properties.h less 2019-08-16 13:31:53 +02:00
netduinoplus2.c hw/arm: Add the Netduino Plus 2 2020-01-17 14:09:29 +00:00
nrf51_soc.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
nseries.c arm/nseries: use memdev for RAM 2020-02-19 16:49:56 +00:00
omap1.c omap-gpio: remove PROP_PTR 2020-01-07 17:24:29 +04:00
omap2.c omap-gpio: remove PROP_PTR 2020-01-07 17:24:29 +04:00
omap_sx1.c arm/omap_sx1: use memdev for RAM 2020-02-19 16:49:56 +00:00
palm.c arm/palm: use memdev for RAM 2020-02-19 16:49:56 +00:00
pxa2xx_gpio.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
pxa2xx_pic.c Include hw/hw.h exactly where needed 2019-08-16 13:31:52 +02:00
pxa2xx.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
raspi.c arm/raspi: use memdev for RAM 2020-02-19 16:49:56 +00:00
realview.c hw/arm: simplify arm_load_dtb 2019-09-03 11:26:55 -03:00
sabrelite.c arm/sabrelite: use memdev for RAM 2020-02-19 16:49:56 +00:00
sbsa-ref.c hw/arm: Use TYPE_PL011 to create serial port 2020-02-28 16:14:57 +00:00
smmu-common.c hw: Remove unnecessary cast when calling dma_memory_read() 2020-02-20 14:47:08 +01:00
smmu-internal.h hw/arm/smmu-common: VMSAv8-64 page table walk 2018-05-04 18:05:51 +01:00
smmuv3-internal.h hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro 2019-12-20 14:03:00 +00:00
smmuv3.c hw: Remove unnecessary cast when calling dma_memory_read() 2020-02-20 14:47:08 +01:00
spitz.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
stellaris.c stellaris: delay timer_new to avoid memleaks 2020-02-07 14:04:28 +00:00
stm32f205_soc.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
stm32f405_soc.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
strongarm.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
strongarm.h hw/arm/collie: Create the RAM in the board 2019-10-22 17:44:01 +01:00
sysbus-fdt.c Clean up inclusion of sysemu/sysemu.h 2019-08-16 13:31:53 +02:00
tosa.c hw/arm: simplify arm_load_dtb 2019-09-03 11:26:55 -03:00
trace-events trace-events: Fix attribution of trace points to source 2019-03-22 16:18:07 +00:00
versatilepb.c arm/versatilepb: use memdev for RAM 2020-02-19 16:49:56 +00:00
vexpress.c arm/vexpress: use memdev for RAM 2020-02-19 16:49:56 +00:00
virt-acpi-build.c arm/acpi: simplify the description of PCI _CRS 2020-02-13 14:14:53 +00:00
virt.c hw/arm: Use TYPE_PL011 to create serial port 2020-02-28 16:14:57 +00:00
xilinx_zynq.c hw/arm/xilinx_zynq: Fix USB port instantiation 2020-02-28 16:14:57 +00:00
xlnx-versal-virt.c Merge tag 'patchew/20200219160953.13771-1-imammedo@redhat.com' of https://github.com/patchew-project/qemu into HEAD 2020-02-25 09:19:00 +01:00
xlnx-versal.c hw/arm: Use TYPE_PL011 to create serial port 2020-02-28 16:14:57 +00:00
xlnx-zcu102.c arm/xlnx-zcu102: use memdev for RAM 2020-02-19 16:49:57 +00:00
xlnx-zynqmp.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
z2.c z2: Make providing flash images non-mandatory 2020-02-21 16:07:00 +00:00