qemu/linux-user/aarch64/cpu_loop.c
Peter Maydell b10089a14c linux-user: Don't call gdb_handlesig() before queue_signal()
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.

Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).

This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-12 15:48:00 +01:00

180 lines
6.3 KiB
C

/*
* qemu user cpu loop
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu.h"
#include "cpu_loop-common.h"
#define get_user_code_u32(x, gaddr, env) \
({ abi_long __r = get_user_u32((x), (gaddr)); \
if (!__r && bswap_code(arm_sctlr_b(env))) { \
(x) = bswap32(x); \
} \
__r; \
})
#define get_user_code_u16(x, gaddr, env) \
({ abi_long __r = get_user_u16((x), (gaddr)); \
if (!__r && bswap_code(arm_sctlr_b(env))) { \
(x) = bswap16(x); \
} \
__r; \
})
#define get_user_data_u32(x, gaddr, env) \
({ abi_long __r = get_user_u32((x), (gaddr)); \
if (!__r && arm_cpu_bswap_data(env)) { \
(x) = bswap32(x); \
} \
__r; \
})
#define get_user_data_u16(x, gaddr, env) \
({ abi_long __r = get_user_u16((x), (gaddr)); \
if (!__r && arm_cpu_bswap_data(env)) { \
(x) = bswap16(x); \
} \
__r; \
})
#define put_user_data_u32(x, gaddr, env) \
({ typeof(x) __x = (x); \
if (arm_cpu_bswap_data(env)) { \
__x = bswap32(__x); \
} \
put_user_u32(__x, (gaddr)); \
})
#define put_user_data_u16(x, gaddr, env) \
({ typeof(x) __x = (x); \
if (arm_cpu_bswap_data(env)) { \
__x = bswap16(__x); \
} \
put_user_u16(__x, (gaddr)); \
})
/* AArch64 main loop */
void cpu_loop(CPUARMState *env)
{
CPUState *cs = CPU(arm_env_get_cpu(env));
int trapnr;
abi_long ret;
target_siginfo_t info;
for (;;) {
cpu_exec_start(cs);
trapnr = cpu_exec(cs);
cpu_exec_end(cs);
process_queued_cpu_work(cs);
switch (trapnr) {
case EXCP_SWI:
ret = do_syscall(env,
env->xregs[8],
env->xregs[0],
env->xregs[1],
env->xregs[2],
env->xregs[3],
env->xregs[4],
env->xregs[5],
0, 0);
if (ret == -TARGET_ERESTARTSYS) {
env->pc -= 4;
} else if (ret != -TARGET_QEMU_ESIGRETURN) {
env->xregs[0] = ret;
}
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
case EXCP_UDEF:
info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPN;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_PREFETCH_ABORT:
case EXCP_DATA_ABORT:
info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
info._sifields._sigfault._addr = env->exception.vaddress;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_DEBUG:
case EXCP_BKPT:
info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
info.si_code = TARGET_TRAP_BRKPT;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_SEMIHOST:
env->xregs[0] = do_arm_semihosting(env);
break;
case EXCP_YIELD:
/* nothing to do here for user-mode, just resume guest code */
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
break;
default:
EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr);
abort();
}
process_pending_signals(env);
/* Exception return on AArch64 always clears the exclusive monitor,
* so any return to running guest code implies this.
*/
env->exclusive_addr = -1;
}
}
void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
{
CPUState *cpu = ENV_GET_CPU(env);
TaskState *ts = cpu->opaque;
struct image_info *info = ts->info;
int i;
if (!(arm_feature(env, ARM_FEATURE_AARCH64))) {
fprintf(stderr,
"The selected ARM CPU does not support 64 bit mode\n");
exit(EXIT_FAILURE);
}
for (i = 0; i < 31; i++) {
env->xregs[i] = regs->regs[i];
}
env->pc = regs->pc;
env->xregs[31] = regs->sp;
#ifdef TARGET_WORDS_BIGENDIAN
env->cp15.sctlr_el[1] |= SCTLR_E0E;
for (i = 1; i < 4; ++i) {
env->cp15.sctlr_el[i] |= SCTLR_EE;
}
#endif
ts->stack_base = info->start_stack;
ts->heap_base = info->brk;
/* This will be filled in on the first SYS_HEAPINFO call. */
ts->heap_limit = 0;
}