Christoffer Dall 747d009dca target-arm: Add GIC phandle to VirtBoardInfo ... Instead of passing the GIC phandle around between functions, add it to the VirtBoardInfo just like we do for the clock_phandle. We are about to add the v2m phandle as well, and it's easier not having to pass around a bunch of phandles, return multiple values from functions, etc. Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1432897270-7780-2-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2015-06-02 14:56:25 +01:00
..
allwinner-a10.c	hw: Mark device misusing nd_table[] FIXME	2015-04-02 15:30:32 +02:00
armv7m.c	target_arm: Parameterise the irq lines for armv7m_init	2015-02-05 13:37:21 +00:00
boot.c	Switch non-CPU callers from ld/st*_phys to address_space_ld/st*	2015-04-26 16:49:24 +01:00
collie.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00
cubieboard.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
digic_boards.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
digic.c	hw/arm/digic: add UART support	2013-12-17 20:12:51 +00:00
exynos4_boards.c	machine: Conversion of QEMUMachineInitArgs to MachineState	2014-05-28 17:35:01 +02:00
exynos4210.c	error: Use error_report_err() where appropriate	2015-02-18 10:51:09 +01:00
gumstix.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00
highbank.c	hw/arm/highbank.c: Wire FIQ between CPU <> GIC	2015-05-12 11:57:19 +01:00
integratorcp.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
kzm.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
mainstone.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00
Makefile.objs	hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM	2015-05-29 11:28:54 +01:00
musicpal.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
netduino2.c	netduino2: Add the Netduino 2 Machine	2015-03-11 13:21:06 +00:00
nseries.c	hw/arm/nseries: convert ffs(3) to ctz32()	2015-04-28 15:36:08 +02:00
omap1.c	Convert ffs() != 0 callers to ctz32()	2015-04-28 15:36:08 +02:00
omap2.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
omap_sx1.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00
palm.c	memory: add parameter errp to memory_region_init_ram	2014-09-09 13:41:43 +02:00
pxa2xx_gpio.c	Convert (ffs(val) - 1) to ctz32(val)	2015-04-28 15:36:08 +02:00
pxa2xx_pic.c	savevm: Remove all the unneeded version_minimum_id_old (arm)	2014-05-13 16:09:35 +01:00
pxa2xx.c	target-arm: rename c1_coproc to cpacr_el1	2015-04-26 16:49:25 +01:00
realview.c	error: Use error_report_err() where appropriate	2015-02-18 10:51:09 +01:00
spitz.c	sysbus: Make devices picking up backends unavailable with -device	2015-04-02 15:30:44 +02:00
stellaris.c	target_arm: Parameterise the irq lines for armv7m_init	2015-02-05 13:37:21 +00:00
stm32f205_soc.c	stm32f205: Add the stm32f205 SoC	2015-03-11 13:21:06 +00:00
strongarm.c	Convert (ffs(val) - 1) to ctz32(val)	2015-04-28 15:36:08 +02:00
strongarm.h	hw: move private headers to hw/ subdirectories.	2013-04-08 18:13:16 +02:00
tosa.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00
versatilepb.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
vexpress.c	hw/arm/vexpress.c: Wire FIQ between CPU <> GIC	2015-05-12 11:57:18 +01:00
virt-acpi-build.c	hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table	2015-05-29 11:28:59 +01:00
virt.c	target-arm: Add GIC phandle to VirtBoardInfo	2015-06-02 14:56:25 +01:00
xilinx_zynq.c	arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory	2015-04-08 17:30:36 +01:00
xlnx-ep108.c	arm: xlnx-ep108: Add bootloading	2015-05-18 16:41:14 +01:00
xlnx-zynqmp.c	arm: xlnx-zynqmp: Add UART support	2015-05-18 16:41:13 +01:00
z2.c	hw: Convert from BlockDriverState to BlockBackend, mostly	2014-10-20 14:02:25 +02:00