qemu/hw/timer/lm32_timer.c
Juan Quintela 35d08458a9 savevm: Remove all the unneeded version_minimum_id_old (rest)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14 15:24:51 +02:00

236 lines
5.5 KiB
C

/*
* QEMU model of the LatticeMico32 timer block.
*
* Copyright (c) 2010 Michael Walle <michael@walle.cc>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*
* Specification available at:
* http://www.latticesemi.com/documents/mico32timer.pdf
*/
#include "hw/hw.h"
#include "hw/sysbus.h"
#include "trace.h"
#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#define DEFAULT_FREQUENCY (50*1000000)
enum {
R_SR = 0,
R_CR,
R_PERIOD,
R_SNAPSHOT,
R_MAX
};
enum {
SR_TO = (1 << 0),
SR_RUN = (1 << 1),
};
enum {
CR_ITO = (1 << 0),
CR_CONT = (1 << 1),
CR_START = (1 << 2),
CR_STOP = (1 << 3),
};
#define TYPE_LM32_TIMER "lm32-timer"
#define LM32_TIMER(obj) OBJECT_CHECK(LM32TimerState, (obj), TYPE_LM32_TIMER)
struct LM32TimerState {
SysBusDevice parent_obj;
MemoryRegion iomem;
QEMUBH *bh;
ptimer_state *ptimer;
qemu_irq irq;
uint32_t freq_hz;
uint32_t regs[R_MAX];
};
typedef struct LM32TimerState LM32TimerState;
static void timer_update_irq(LM32TimerState *s)
{
int state = (s->regs[R_SR] & SR_TO) && (s->regs[R_CR] & CR_ITO);
trace_lm32_timer_irq_state(state);
qemu_set_irq(s->irq, state);
}
static uint64_t timer_read(void *opaque, hwaddr addr, unsigned size)
{
LM32TimerState *s = opaque;
uint32_t r = 0;
addr >>= 2;
switch (addr) {
case R_SR:
case R_CR:
case R_PERIOD:
r = s->regs[addr];
break;
case R_SNAPSHOT:
r = (uint32_t)ptimer_get_count(s->ptimer);
break;
default:
error_report("lm32_timer: read access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
trace_lm32_timer_memory_read(addr << 2, r);
return r;
}
static void timer_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
LM32TimerState *s = opaque;
trace_lm32_timer_memory_write(addr, value);
addr >>= 2;
switch (addr) {
case R_SR:
s->regs[R_SR] &= ~SR_TO;
break;
case R_CR:
s->regs[R_CR] = value;
if (s->regs[R_CR] & CR_START) {
ptimer_run(s->ptimer, 1);
}
if (s->regs[R_CR] & CR_STOP) {
ptimer_stop(s->ptimer);
}
break;
case R_PERIOD:
s->regs[R_PERIOD] = value;
ptimer_set_count(s->ptimer, value);
break;
case R_SNAPSHOT:
error_report("lm32_timer: write access to read only register 0x"
TARGET_FMT_plx, addr << 2);
break;
default:
error_report("lm32_timer: write access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
timer_update_irq(s);
}
static const MemoryRegionOps timer_ops = {
.read = timer_read,
.write = timer_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void timer_hit(void *opaque)
{
LM32TimerState *s = opaque;
trace_lm32_timer_hit();
s->regs[R_SR] |= SR_TO;
if (s->regs[R_CR] & CR_CONT) {
ptimer_set_count(s->ptimer, s->regs[R_PERIOD]);
ptimer_run(s->ptimer, 1);
}
timer_update_irq(s);
}
static void timer_reset(DeviceState *d)
{
LM32TimerState *s = LM32_TIMER(d);
int i;
for (i = 0; i < R_MAX; i++) {
s->regs[i] = 0;
}
ptimer_stop(s->ptimer);
}
static int lm32_timer_init(SysBusDevice *dev)
{
LM32TimerState *s = LM32_TIMER(dev);
sysbus_init_irq(dev, &s->irq);
s->bh = qemu_bh_new(timer_hit, s);
s->ptimer = ptimer_init(s->bh);
ptimer_set_freq(s->ptimer, s->freq_hz);
memory_region_init_io(&s->iomem, OBJECT(s), &timer_ops, s,
"timer", R_MAX * 4);
sysbus_init_mmio(dev, &s->iomem);
return 0;
}
static const VMStateDescription vmstate_lm32_timer = {
.name = "lm32-timer",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_PTIMER(ptimer, LM32TimerState),
VMSTATE_UINT32(freq_hz, LM32TimerState),
VMSTATE_UINT32_ARRAY(regs, LM32TimerState, R_MAX),
VMSTATE_END_OF_LIST()
}
};
static Property lm32_timer_properties[] = {
DEFINE_PROP_UINT32("frequency", LM32TimerState, freq_hz, DEFAULT_FREQUENCY),
DEFINE_PROP_END_OF_LIST(),
};
static void lm32_timer_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = lm32_timer_init;
dc->reset = timer_reset;
dc->vmsd = &vmstate_lm32_timer;
dc->props = lm32_timer_properties;
}
static const TypeInfo lm32_timer_info = {
.name = TYPE_LM32_TIMER,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(LM32TimerState),
.class_init = lm32_timer_class_init,
};
static void lm32_timer_register_types(void)
{
type_register_static(&lm32_timer_info);
}
type_init(lm32_timer_register_types)