mirror of
https://github.com/qemu/qemu.git
synced 2024-12-02 00:03:35 +08:00
22773d6066
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
mmio-no-eventfd:pci-mem 8796
mmio-wildcard-eventfd:pci-mem 3609
mmio-datamatch-eventfd:pci-mem 3685
portio-no-eventfd:pci-io 5287
portio-wildcard-eventfd:pci-io 1762
portio-datamatch-eventfd:pci-io 1777
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
27 lines
1.1 KiB
Plaintext
27 lines
1.1 KiB
Plaintext
pci-test is a device used for testing low level IO
|
|
|
|
device implements up to two BARs: BAR0 and BAR1.
|
|
Each BAR can be memory or IO. Guests must detect
|
|
BAR type and act accordingly.
|
|
|
|
Each BAR size is up to 4K bytes.
|
|
Each BAR starts with the following header:
|
|
|
|
typedef struct PCITestDevHdr {
|
|
uint8_t test; <- write-only, starts a given test number
|
|
uint8_t width_type; <- read-only, type and width of access for a given test.
|
|
1,2,4 for byte,word or long write.
|
|
any other value if test not supported on this BAR
|
|
uint8_t pad0[2];
|
|
uint32_t offset; <- read-only, offset in this BAR for a given test
|
|
uint32_t data; <- read-only, data to use for a given test
|
|
uint32_t count; <- for debugging. number of writes detected.
|
|
uint8_t name[]; <- for debugging. 0-terminated ASCII string.
|
|
} PCITestDevHdr;
|
|
|
|
All registers are little endian.
|
|
|
|
device is expected to always implement tests 0 to N on each BAR, and to add new
|
|
tests with higher numbers. In this way a guest can scan test numbers until it
|
|
detects an access type that it does not support on this BAR, then stop.
|