mirrors/qemu
0
0
Fork 0
mirror of https://github.com/qemu/qemu.git synced 2024-11-26 21:33:40 +08:00
Code Issues Packages Projects Releases Wiki Activity
3ae8061898
qemu/hw/ssd0303.c
aliguori 3023f3329d graphical_console_init change (Stefano Stabellini) 
Patch 5/7

This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.

This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.

This patch does *not* include any required changes to any device, these
changes come with the following patches.

Patch 6/7

This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;

In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.

Patch 7/7

This patch updates the graphic device code to use the new
graphical_console_init function.

As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16 19:04:14 +00:00

322 lines
8.8 KiB
C
Raw Blame History

/*
* SSD0303 OLED controller with OSRAM Pictiva 96x16 display.
*
* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
/* The controller can support a variety of different displays, but we only
implement one. Most of the commends relating to brightness and geometry
setup are ignored. */
#include "hw.h"
#include "i2c.h"
#include "console.h"
//#define DEBUG_SSD0303 1
#ifdef DEBUG_SSD0303
#define DPRINTF(fmt, args...) \
do { printf("ssd0303: " fmt , ##args); } while (0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "ssd0303: error: " fmt , ##args); exit(1);} while (0)
#else
#define DPRINTF(fmt, args...) do {} while(0)
#define BADF(fmt, args...) \
do { fprintf(stderr, "ssd0303: error: " fmt , ##args);} while (0)
#endif
/* Scaling factor for pixels. */
#define MAGNIFY 4
enum ssd0303_mode
{
SSD0303_IDLE,
SSD0303_DATA,
SSD0303_CMD
};
enum ssd0303_cmd {
SSD0303_CMD_NONE,
SSD0303_CMD_SKIP1
};
typedef struct {
i2c_slave i2c;
DisplayState *ds;
int row;
int col;
int start_line;
int mirror;
int flash;
int enabled;
int inverse;
int redraw;
enum ssd0303_mode mode;
enum ssd0303_cmd cmd_state;
uint8_t framebuffer[132*8];
} ssd0303_state;
static int ssd0303_recv(i2c_slave *i2c)
{
BADF("Reads not implemented\n");
return -1;
}
static int ssd0303_send(i2c_slave *i2c, uint8_t data)
{
ssd0303_state *s = (ssd0303_state *)i2c;
enum ssd0303_cmd old_cmd_state;
switch (s->mode) {
case SSD0303_IDLE:
DPRINTF("byte 0x%02x\n", data);
if (data == 0x80)
s->mode = SSD0303_CMD;
else if (data == 0x40)
s->mode = SSD0303_DATA;
else
BADF("Unexpected byte 0x%x\n", data);
break;
case SSD0303_DATA:
DPRINTF("data 0x%02x\n", data);
if (s->col < 132) {
s->framebuffer[s->col + s->row * 132] = data;
s->col++;
s->redraw = 1;
}
break;
case SSD0303_CMD:
old_cmd_state = s->cmd_state;
s->cmd_state = SSD0303_CMD_NONE;
switch (old_cmd_state) {
case SSD0303_CMD_NONE:
DPRINTF("cmd 0x%02x\n", data);
s->mode = SSD0303_IDLE;
switch (data) {
case 0x00 ... 0x0f: /* Set lower colum address. */
s->col = (s->col & 0xf0) | (data & 0xf);
break;
case 0x10 ... 0x20: /* Set higher column address. */
s->col = (s->col & 0x0f) | ((data & 0xf) << 4);
break;
case 0x40 ... 0x7f: /* Set start line. */
s->start_line = 0;
break;
case 0x81: /* Set contrast (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xa0: /* Mirror off. */
s->mirror = 0;
break;
case 0xa1: /* Mirror off. */
s->mirror = 1;
break;
case 0xa4: /* Entire display off. */
s->flash = 0;
break;
case 0xa5: /* Entire display on. */
s->flash = 1;
break;
case 0xa6: /* Inverse off. */
s->inverse = 0;
break;
case 0xa7: /* Inverse on. */
s->inverse = 1;
break;
case 0xa8: /* Set multipled ratio (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xad: /* DC-DC power control. */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xae: /* Display off. */
s->enabled = 0;
break;
case 0xaf: /* Display on. */
s->enabled = 1;
break;
case 0xb0 ... 0xbf: /* Set Page address. */
s->row = data & 7;
break;
case 0xc0 ... 0xc8: /* Set COM output direction (Ignored). */
break;
case 0xd3: /* Set display offset (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xd5: /* Set display clock (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xd8: /* Set color and power mode (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xd9: /* Set pre-charge period (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xda: /* Set COM pin configuration (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xdb: /* Set VCOM dselect level (Ignored). */
s->cmd_state = SSD0303_CMD_SKIP1;
break;
case 0xe3: /* no-op. */
break;
default:
BADF("Unknown command: 0x%x\n", data);
}
break;
case SSD0303_CMD_SKIP1:
DPRINTF("skip 0x%02x\n", data);
break;
}
break;
}
return 0;
}
static void ssd0303_event(i2c_slave *i2c, enum i2c_event event)
{
ssd0303_state *s = (ssd0303_state *)i2c;
switch (event) {
case I2C_FINISH:
s->mode = SSD0303_IDLE;
break;
case I2C_START_RECV:
case I2C_START_SEND:
case I2C_NACK:
/* Nothing to do. */
break;
}
}
static void ssd0303_update_display(void *opaque)
{
ssd0303_state *s = (ssd0303_state *)opaque;
uint8_t *dest;
uint8_t *src;
int x;
int y;
int line;
char *colors[2];
char colortab[MAGNIFY * 8];
int dest_width;
uint8_t mask;
if (!s->redraw)
return;
switch (ds_get_bits_per_pixel(s->ds)) {
case 0:
return;
case 15:
dest_width = 2;
break;
case 16:
dest_width = 2;
break;
case 24:
dest_width = 3;
break;
case 32:
dest_width = 4;
break;
default:
BADF("Bad color depth\n");
return;
}
dest_width *= MAGNIFY;
memset(colortab, 0xff, dest_width);
memset(colortab + dest_width, 0, dest_width);
if (s->flash) {
colors[0] = colortab;
colors[1] = colortab;
} else if (s->inverse) {
colors[0] = colortab;
colors[1] = colortab + dest_width;
} else {
colors[0] = colortab + dest_width;
colors[1] = colortab;
}
dest = ds_get_data(s->ds);
for (y = 0; y < 16; y++) {
line = (y + s->start_line) & 63;
src = s->framebuffer + 132 * (line >> 3) + 36;
mask = 1 << (line & 7);
for (x = 0; x < 96; x++) {
memcpy(dest, colors[(*src & mask) != 0], dest_width);
dest += dest_width;
src++;
}
for (x = 1; x < MAGNIFY; x++) {
memcpy(dest, dest - dest_width * 96, dest_width * 96);
dest += dest_width * 96;
}
}
s->redraw = 0;
dpy_update(s->ds, 0, 0, 96 * MAGNIFY, 16 * MAGNIFY);
}
static void ssd0303_invalidate_display(void * opaque)
{
ssd0303_state *s = (ssd0303_state *)opaque;
s->redraw = 1;
}
static void ssd0303_save(QEMUFile *f, void *opaque)
{
ssd0303_state *s = (ssd0303_state *)opaque;
qemu_put_be32(f, s->row);
qemu_put_be32(f, s->col);
qemu_put_be32(f, s->start_line);
qemu_put_be32(f, s->mirror);
qemu_put_be32(f, s->flash);
qemu_put_be32(f, s->enabled);
qemu_put_be32(f, s->inverse);
qemu_put_be32(f, s->redraw);
qemu_put_be32(f, s->mode);
qemu_put_be32(f, s->cmd_state);
qemu_put_buffer(f, s->framebuffer, sizeof(s->framebuffer));
i2c_slave_save(f, &s->i2c);
}
static int ssd0303_load(QEMUFile *f, void *opaque, int version_id)
{
ssd0303_state *s = (ssd0303_state *)opaque;
if (version_id != 1)
return -EINVAL;
s->row = qemu_get_be32(f);
s->col = qemu_get_be32(f);
s->start_line = qemu_get_be32(f);
s->mirror = qemu_get_be32(f);
s->flash = qemu_get_be32(f);
s->enabled = qemu_get_be32(f);
s->inverse = qemu_get_be32(f);
s->redraw = qemu_get_be32(f);
s->mode = qemu_get_be32(f);
s->cmd_state = qemu_get_be32(f);
qemu_get_buffer(f, s->framebuffer, sizeof(s->framebuffer));
i2c_slave_load(f, &s->i2c);
return 0;
}
void ssd0303_init(i2c_bus *bus, int address)
{
ssd0303_state *s;
s = (ssd0303_state *)i2c_slave_init(bus, address, sizeof(ssd0303_state));
s->i2c.event = ssd0303_event;
s->i2c.recv = ssd0303_recv;
s->i2c.send = ssd0303_send;
s->ds = graphic_console_init(ssd0303_update_display,
ssd0303_invalidate_display,
NULL, NULL, s);
qemu_console_resize(s->ds, 96 * MAGNIFY, 16 * MAGNIFY);
register_savevm("ssd0303_oled", -1, 1, ssd0303_save, ssd0303_load, s);
}
Reference in New Issue View Git Blame Copy Permalink