mirrors/qemu
0
0
Fork 0
mirror of https://github.com/qemu/qemu.git synced 2024-11-27 13:53:45 +08:00
Code Issues Packages Projects Releases Wiki Activity
21206a104f
qemu/hw/pl080.c
pbrook cdbdb648b7 ARM Versatile Platform Baseboard emulation. 
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1804 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-09 01:32:52 +00:00

329 lines
8.9 KiB
C
Raw Blame History

/*
* Arm PrimeCell PL080 DMA controller
*
* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
#include "vl.h"
#define PL080_NUM_CHANNELS 8
#define PL080_CONF_E 0x1
#define PL080_CONF_M1 0x2
#define PL080_CONF_M2 0x4
#define PL080_CCONF_H 0x40000
#define PL080_CCONF_A 0x20000
#define PL080_CCONF_L 0x10000
#define PL080_CCONF_ITC 0x08000
#define PL080_CCONF_IE 0x04000
#define PL080_CCONF_E 0x00001
#define PL080_CCTRL_I 0x80000000
#define PL080_CCTRL_DI 0x08000000
#define PL080_CCTRL_SI 0x04000000
#define PL080_CCTRL_D 0x02000000
#define PL080_CCTRL_S 0x01000000
typedef struct {
uint32_t src;
uint32_t dest;
uint32_t lli;
uint32_t ctrl;
uint32_t conf;
} pl080_channel;
typedef struct {
uint32_t base;
uint8_t tc_int;
uint8_t tc_mask;
uint8_t err_int;
uint8_t err_mask;
uint32_t conf;
uint32_t sync;
uint32_t req_single;
uint32_t req_burst;
pl080_channel chan[PL080_NUM_CHANNELS];
/* Flag to avoid recursive DMA invocations. */
int running;
void *pic;
int irq;
} pl080_state;
static const unsigned char pl080_id[] =
{ 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
static void pl080_update(pl080_state *s)
{
if ((s->tc_int & s->tc_mask)
|| (s->err_int & s->err_mask))
pic_set_irq_new(s->pic, s->irq, 1);
else
pic_set_irq_new(s->pic, s->irq, 1);
}
static void pl080_run(pl080_state *s)
{
int c;
int flow;
pl080_channel *ch;
int swidth;
int dwidth;
int xsize;
int n;
int src_id;
int dest_id;
int size;
char buff[4];
uint32_t req;
s->tc_mask = 0;
for (c = 0; c < PL080_NUM_CHANNELS; c++) {
if (s->chan[c].conf & PL080_CCONF_ITC)
s->tc_mask |= 1 << c;
if (s->chan[c].conf & PL080_CCONF_IE)
s->err_mask |= 1 << c;
}
if ((s->conf & PL080_CONF_E) == 0)
return;
cpu_abort(cpu_single_env, "DMA active\n");
/* If we are already in the middle of a DMA operation then indicate that
there may be new DMA requests and return immediately. */
if (s->running) {
s->running++;
return;
}
s->running = 1;
while (s->running) {
for (c = 0; c < PL080_NUM_CHANNELS; c++) {
ch = &s->chan[c];
again:
/* Test if thiws channel has any pending DMA requests. */
if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))
!= PL080_CCONF_E)
continue;
flow = (ch->conf >> 11) & 7;
if (flow >= 4) {
cpu_abort(cpu_single_env,
"pl080_run: Peripheral flow control not implemented\n");
}
src_id = (ch->conf >> 1) & 0x1f;
dest_id = (ch->conf >> 6) & 0x1f;
size = ch->ctrl & 0xfff;
req = s->req_single | s->req_burst;
switch (flow) {
case 0:
break;
case 1:
if ((req & (1u << dest_id)) == 0)
size = 0;
break;
case 2:
if ((req & (1u << src_id)) == 0)
size = 0;
break;
case 3:
if ((req & (1u << src_id)) == 0
|| (req & (1u << dest_id)) == 0)
size = 0;
break;
}
if (!size)
continue;
/* Transfer one element. */
/* ??? Should transfer multiple elements for a burst request. */
/* ??? Unclear what the proper behavior is when source and
destination widths are different. */
swidth = 1 << ((ch->ctrl >> 18) & 7);
dwidth = 1 << ((ch->ctrl >> 21) & 7);
for (n = 0; n < dwidth; n+= swidth) {
cpu_physical_memory_read(ch->src, buff + n, swidth);
if (ch->ctrl & PL080_CCTRL_SI)
ch->src += swidth;
}
xsize = (dwidth < swidth) ? swidth : dwidth;
/* ??? This may pad the value incorrectly for dwidth < 32. */
for (n = 0; n < xsize; n += dwidth) {
cpu_physical_memory_write(ch->dest + n, buff + n, dwidth);
if (ch->ctrl & PL080_CCTRL_DI)
ch->dest += swidth;
}
size--;
ch->ctrl = (ch->ctrl & 0xfffff000) | size;
if (size == 0) {
/* Transfer complete. */
if (ch->lli) {
ch->src = ldl_phys(ch->lli);
ch->dest = ldl_phys(ch->lli + 4);
ch->ctrl = ldl_phys(ch->lli + 12);
ch->lli = ldl_phys(ch->lli + 8);
} else {
ch->conf &= ~PL080_CCONF_E;
}
if (ch->ctrl & PL080_CCTRL_I) {
s->tc_int |= 1 << c;
}
}
goto again;
}
if (--s->running)
s->running = 1;
}
}
static uint32_t pl080_read(void *opaque, target_phys_addr_t offset)
{
pl080_state *s = (pl080_state *)opaque;
uint32_t i;
uint32_t mask;
offset -= s->base;
if (offset >= 0xfe0 && offset < 0x1000) {
return pl080_id[(offset - 0xfe0) >> 2];
}
if (offset >= 0x100 && offset < 0x200) {
i = (offset & 0xe0) >> 5;
switch (offset >> 2) {
case 0: /* SrcAddr */
return s->chan[i].src;
case 1: /* DestAddr */
return s->chan[i].dest;
case 2: /* LLI */
return s->chan[i].lli;
case 3: /* Control */
return s->chan[i].ctrl;
case 4: /* Configuration */
return s->chan[i].conf;
default:
goto bad_offset;
}
}
switch (offset >> 2) {
case 0: /* IntStatus */
return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);
case 1: /* IntTCStatus */
return (s->tc_int & s->tc_mask);
case 3: /* IntErrorStatus */
return (s->err_int & s->err_mask);
case 5: /* RawIntTCStatus */
return s->tc_int;
case 6: /* RawIntErrorStatus */
return s->err_int;
case 7: /* EnbldChns */
mask = 0;
for (i = 0; i < PL080_NUM_CHANNELS; i++) {
if (s->chan[i].conf & PL080_CCONF_E)
mask |= 1 << i;
}
return mask;
case 8: /* SoftBReq */
case 9: /* SoftSReq */
case 10: /* SoftLBReq */
case 11: /* SoftLSReq */
/* ??? Implement these. */
return 0;
case 12: /* Configuration */
return s->conf;
case 13: /* Sync */
return s->sync;
default:
bad_offset:
cpu_abort(cpu_single_env, "pl080_read: Bad offset %x\n", offset);
return 0;
}
}
static void pl080_write(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
pl080_state *s = (pl080_state *)opaque;
int i;
offset -= s->base;
if (offset >= 0x100 && offset < 0x200) {
i = (offset & 0xe0) >> 5;
switch (offset >> 2) {
case 0: /* SrcAddr */
s->chan[i].src = value;
break;
case 1: /* DestAddr */
s->chan[i].dest = value;
break;
case 2: /* LLI */
s->chan[i].lli = value;
break;
case 3: /* Control */
s->chan[i].ctrl = value;
break;
case 4: /* Configuration */
s->chan[i].conf = value;
pl080_run(s);
break;
}
}
switch (offset >> 2) {
case 2: /* IntTCClear */
s->tc_int &= ~value;
break;
case 4: /* IntErrorClear */
s->err_int &= ~value;
break;
case 8: /* SoftBReq */
case 9: /* SoftSReq */
case 10: /* SoftLBReq */
case 11: /* SoftLSReq */
/* ??? Implement these. */
cpu_abort(cpu_single_env, "pl080_write: Soft DMA not implemented\n");
break;
case 12: /* Configuration */
s->conf = value;
if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) {
cpu_abort(cpu_single_env,
"pl080_write: Big-endian DMA not implemented\n");
}
pl080_run(s);
break;
case 13: /* Sync */
s->sync = value;
break;
default:
cpu_abort(cpu_single_env, "pl080_write: Bad offset %x\n", offset);
}
pl080_update(s);
}
static CPUReadMemoryFunc *pl080_readfn[] = {
pl080_read,
pl080_read,
pl080_read
};
static CPUWriteMemoryFunc *pl080_writefn[] = {
pl080_write,
pl080_write,
pl080_write
};
void *pl080_init(uint32_t base, void *pic, int irq)
{
int iomemtype;
pl080_state *s;
s = (pl080_state *)qemu_mallocz(sizeof(pl080_state));
iomemtype = cpu_register_io_memory(0, pl080_readfn,
pl080_writefn, s);
cpu_register_physical_memory(base, 0x00000fff, iomemtype);
s->base = base;
s->pic = pic;
s->irq = irq;
/* ??? Save/restore. */
return s;
}
Reference in New Issue View Git Blame Copy Permalink