Commit Graph

145 Commits

Author SHA1 Message Date
Peter Maydell
d88d5a3806 Renesas hardware patches
- Add a common entry for Renesas hardware in MAINTAINERS
 - Trivial SH4 cleanups
 - Add RX GDB simulator from Yoshinori Sato
 
 The Renesas RX target emulation was added in commit c8c35e5f51,
 these patches complete the target by adding the hardware emulation.
 
 Tests included:
 
 $ avocado --show=app,console run -t arch:rx tests/acceptance/
 Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot
 Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash
  (1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot:
 console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
 PASS (0.26 s)
  (2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash:
 console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
 console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
 console: Kernel command line:
 console: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 console: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 console: Memory: 14648K/32768K available (871K kernel code, 95K rwdata, 140K rodata, 96K init, 175K bss, 18120K reserved, 0K cma-reserved)
 console: NR_IRQS: 256
 console: rx-cmt: used for periodic clock events
 console: clocksource: rx-tpu: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1274173631191 ns
 console: 96.00 BogoMIPS (lpj=480000)
 console: pid_max: default: 4096 minimum: 301
 console: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 console: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 console: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 console: clocksource: Switched to clocksource rx-tpu
 console: workingset: timestamp_bits=30 max_order=12 bucket_order=0
 console: SuperH (H)SCI(F) driver initialized
 console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
 console: console [ttySC0] enabled
 console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
 console: random: get_random_bytes called from 0x01002e48 with crng_init=0
 console: Freeing unused kernel memory: 96K
 console: This architecture does not have kernel memory protection.
 console: Run /sbin/init as init process
 console: Run /etc/init as init process
 console: Run /bin/init as init process
 console: Run /bin/sh as init process
 console: Sash command shell (version 1.1.1)
 console: /> printenv
 console: HOME=/
 console: TERM=linux
 PASS (0.73 s)
 RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
 JOB TIME   : 1.47 s
 
 CI results:
 . https://cirrus-ci.com/build/6140199509950464
 . https://travis-ci.org/github/philmd/qemu/builds/700954881
 . https://app.shippable.com/github/philmd/qemu/runs/812/summary/console
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl7w/dkACgkQ4+MsLN6t
 wN6tHw//Xt+n/PMXOWdPfAA6Ezfc+4k/CKXMXG+PM2bq2wwmrpMLybxJMVBb7Q3H
 83F5nSdDziEd0T7XzT2lzh3Qg6wcVmGXvvgMInyL8VNoLWeQoOllIKKY35FikhPH
 Vx5W3OEPSgzcqb2//fUVha+VaKW8mv+AmMp/fmI0woHe8qBYq641QNbQUyQ/0L4E
 iJR6Tyl/2KE/9V6iED+qQ9qa5nY/INve73dj1/hyBKB0WgsjTH5qCipxlx8BCQHS
 vGQ/IbAJl/CpXUN/dhQ8Uxaq97QBdeu1rBefGETj2TJrv+5jbmOVj/Ac/VFojMz1
 iBIrYDtHU8h3msceDwZHeJvhWUgdqzuEWXYl5UKgt+FkzXZvDlc6Fkill01DYrDL
 OINVUhlvkpN+sTJYkA8GrcNKpI7dEK/qrfh7utuvgyblZVOaJJV6ldPQ1378ENmc
 QsdtWfkmcVR704ATZk6tYNPI3d8xvepPnjAGFdFISrBEC92Rj2jCQX6zwGu7M7Zg
 M9okNv8krx4bMub0XaK8MQzPpBkWEPzdCo5b11lOZeyvJ5NgJsZRiCdCwX08vmji
 NJzrIaFoWs5qLh3+kwY3b6fvku+6xn5iuYhKO6AdMTDxduWKslE0XU45dv6+NBsA
 NriEIagcb9R2vTYug4I2vfzCOrWwJqP5DDKX2iqT84Pa++KC3C8=
 =Ij2z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-hw-20200622' into staging

Renesas hardware patches

- Add a common entry for Renesas hardware in MAINTAINERS
- Trivial SH4 cleanups
- Add RX GDB simulator from Yoshinori Sato

The Renesas RX target emulation was added in commit c8c35e5f51,
these patches complete the target by adding the hardware emulation.

Tests included:

$ avocado --show=app,console run -t arch:rx tests/acceptance/
Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot
Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash
 (1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot:
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
PASS (0.26 s)
 (2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash:
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
console: Kernel command line:
console: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
console: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
console: Memory: 14648K/32768K available (871K kernel code, 95K rwdata, 140K rodata, 96K init, 175K bss, 18120K reserved, 0K cma-reserved)
console: NR_IRQS: 256
console: rx-cmt: used for periodic clock events
console: clocksource: rx-tpu: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1274173631191 ns
console: 96.00 BogoMIPS (lpj=480000)
console: pid_max: default: 4096 minimum: 301
console: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
console: clocksource: Switched to clocksource rx-tpu
console: workingset: timestamp_bits=30 max_order=12 bucket_order=0
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
console: random: get_random_bytes called from 0x01002e48 with crng_init=0
console: Freeing unused kernel memory: 96K
console: This architecture does not have kernel memory protection.
console: Run /sbin/init as init process
console: Run /etc/init as init process
console: Run /bin/init as init process
console: Run /bin/sh as init process
console: Sash command shell (version 1.1.1)
console: /> printenv
console: HOME=/
console: TERM=linux
PASS (0.73 s)
RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME   : 1.47 s

CI results:
. https://cirrus-ci.com/build/6140199509950464
. https://travis-ci.org/github/philmd/qemu/builds/700954881
. https://app.shippable.com/github/philmd/qemu/runs/812/summary/console

# gpg: Signature made Mon 22 Jun 2020 19:52:09 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/renesas-hw-20200622:
  docs: Document the RX target
  BootLinuxConsoleTest: Test the RX GDB simulator
  hw/rx: Add RX GDB simulator
  hw/rx: Register R5F562N7 and R5F562N8 MCUs
  hw/rx: Honor -accel qtest
  hw/rx: RX62N microcontroller (MCU)
  hw/char: RX62N serial communication interface (SCI)
  hw/timer: RX62N compare match timer (CMT)
  hw/timer: RX62N 8-Bit timer (TMR)
  hw/intc: RX62N interrupt controller (ICUa)
  hw/timer/sh_timer: Remove unused 'qemu/timer.h' include
  hw/sh4: Extract timer definitions to 'hw/timer/tmu012.h'
  hw/sh4: Use MemoryRegion typedef
  MAINTAINERS: Add an entry for common Renesas peripherals
  MAINTAINERS: Cover sh_intc files in the R2D/Shix machine sections

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23 13:55:52 +01:00
Philippe Mathieu-Daudé
cf665623cb BootLinuxConsoleTest: Test the RX GDB simulator
Add two tests for the rx-gdbsim machine, based on the recommended
test setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html

- U-Boot prompt
- Linux kernel with Sash shell

These are very quick tests:

  $ avocado run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
  JOB ID     : 84a6ef01c0b87975ecbfcb31a920afd735753ace
  JOB LOG    : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
   (1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot: PASS (0.11 s)
   (2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash: PASS (0.45 s)
  RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0

Tests can also be run with:

  $ avocado --show=console run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
  console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
  console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
  console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
  ...
  console: SuperH (H)SCI(F) driver initialized
  console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
  console: console [ttySC0] enabled
  console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20200224141923.82118-22-ysato@users.sourceforge.jp>
[PMD: Replace obsolete set_machine() by machine tag, and rename as gdbsim]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-22 18:37:12 +02:00
Pavel Dovgalyuk
b52d7e216c tests/acceptance: record/replay tests with advcal images
This patch adds more record/replay tests with kernel images.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073592589.20809.5156301499042635614.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Use os.path.join(), add avocado 'cpu' tags]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
20b1bf2ea9 tests/acceptance: add record/replay test for m68k
This patch adds a test for record/replay of the kernel
image boot for m68k platform.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <159073592033.20809.1838967871297177313.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
2e1206b9cb tests/acceptance: add record/replay test for ppc64
This patch adds a test for record/replay of the kernel
image boot for ppc64 platform.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073591363.20809.15658672985367330140.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
2f2d83ad2e tests/acceptance: add record/replay test for arm
This patch adds a test for record/replay of the kernel
image boot for two different arm platforms.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073590785.20809.17654573764167037499.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
152a41b774 tests/acceptance: add record/replay test for aarch64
This patch adds a test for record/replay of the kernel
image boot for aarch64 platform.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073590231.20809.9842179251741585482.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
904be130b2 tests/acceptance: add kernel record/replay test for x86_64
This patch adds a test for record/replay an execution of x86_64 machine.
Execution scenario includes simple kernel boot, which allows testing
basic hardware interaction in RR mode.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073589656.20809.14010247947948822435.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Skip test_x86_64_pc on Travis-CI]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:52 +02:00
Pavel Dovgalyuk
c7ebab0f16 tests/acceptance: add base class record/replay kernel tests
This patch adds a base for testing kernel boot recording and replaying.
Each test has the phase of recording and phase of replaying.
Virtual machines just boot the kernel and do not interact with
the network.
Structure and image links for the tests are borrowed from boot_linux_console.py
Testing controls the message pattern at the end of the kernel
boot for both record and replay modes. In replay mode QEMU is also
intended to finish the execution automatically.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073589099.20809.14078431743098373301.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Keep imports sorted alphabetically]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-21 13:58:45 +02:00
Thomas Huth
8662404650 tests/acceptance: Add boot tests for sh4 QEMU advent calendar image
Now that we can select the second serial console in the acceptance tests
(see commit 746f244d97 "Allow to use other serial consoles than default"),
we can also test the sh4 image from the QEMU advent calendar 2018.

Message-Id: <20200515164337.4899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-06-15 18:26:47 +02:00
Paul Zimmerman
d02ded0870 raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
Add a check for functional dwc-hsotg (dwc2) USB host emulation to
the Raspi 2 acceptance test

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-8-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05 17:23:09 +01:00
Thomas Huth
27dfbafaa7 tests/acceptance: Add a boot test for the xlnx-versal-virt machine
As described by Edgar here:

 https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html

we can use the Ubuntu kernel for testing the xlnx-versal-virt machine.
So let's add a boot test for this now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200525141237.15243-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05 17:23:09 +01:00
Pavel Dovgalyuk
1c80c87c8c tests/acceptance: refactor boot_linux to allow code reuse
This patch moves image downloading functions to the separate class to allow
reusing them from record/replay tests.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073593167.20809.17582679291556188984.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-31 18:25:31 +02:00
Pavel Dovgalyuk
12121c496f tests/acceptance: refactor boot_linux_console test to allow code reuse
This patch splits code in BootLinuxConsole class into two different
classes to allow reusing it by record/replay tests.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073588490.20809.13942096070255577558.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-31 18:25:31 +02:00
Pavel Dovgalyuk
a5ba86d423 tests/acceptance: allow console interaction with specific VMs
Console interaction in avocado scripts was possible only with single
default VM.
This patch modifies the function parameters to allow passing a specific
VM as a parameter to interact with it.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073587933.20809.5122618715976660635.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-31 18:25:31 +02:00
Dr. David Alan Gilbert
2c9120a223 tests/acceptance/migration.py: Wait for both sides
When the source finishes migration the destination will still be
receiving the data sent by the source, so it might not have quite
finished yet, so won't quite have reached 'completed'.
This lead to occasional asserts in the next few checks.

After the source has finished, check the destination as well.
(We can't just switch to checking the destination, because it doesn't
give a status until it has started receiving the migration).

Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528112404.121972-1-dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-31 18:25:31 +02:00
Thomas Huth
56c2c59252 tests/acceptance: Add a test for the canon-a1100 machine
The canon-a1100 machine can be used with the Barebox firmware. The
QEMU Advent Calendar 2018 features a pre-compiled image which we
can use for testing.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200514190422.23645-1-f4bug@amsat.org
Message-Id: <20200129090420.13954-1-thuth@redhat.com>
[PMD: Rebased MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21 20:00:18 +01:00
Subbaraya Sundeep
70d7857f93 tests/boot_linux_console: Add ethernet test to SmartFusion2
In addition to simple serial test this patch uses ping
to test the ethernet block modelled in SmartFusion2 SoC.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-4-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30 11:52:28 +01:00
Philippe Mathieu-Daudé
5baecf58ad tests/acceptance/machine_sparc_leon3: Disable HelenOS test
This test was written/tested around beginning of 2019, but was
extracted from a bigger series and posted end of June 2019 [*].
Unfortunately I did not notice commit 162abf1a8 was merged by
then, which implements the AHB and APB plug and play devices.

HelenOS 0.6 is expecting the PnP registers to be not implemented
by QEMU, then forces the discovered AMBA devices (see [2]).

Before 162abf1a8, the console was displaying:

  HelenOS bootloader, release 0.6.0 (Elastic Horse)
  Built on 2014-12-21 20:17:42 for sparc32
  Copyright (c) 2001-2014 HelenOS project
   0x4000bf20|0x4000bf20: kernel image (496640/128466 bytes)
   0x4002b4f2|0x4002b4f2: ns image (154195/66444 bytes)
   0x4003b87e|0x4003b87e: loader image (153182/66437 bytes)
   0x4004bc03|0x4004bc03: init image (155339/66834 bytes)
   0x4005c115|0x4005c115: locsrv image (162063/70267 bytes)
   0x4006d390|0x4006d390: rd image (152678/65889 bytes)
   0x4007d4f1|0x4007d4f1: vfs image (168480/73394 bytes)
   0x4008f3a3|0x4008f3a3: logger image (158034/68368 bytes)
   0x4009feb3|0x4009feb3: ext4fs image (234510/100301 bytes)
   0x400b8680|0x400b8680: initrd image (8388608/1668901 bytes)
  ABMA devices:
  <1:00c> at 0x80000100 irq 3
  <1:00d> at 0x80000200
  <1:011> at 0x80000300 irq 8
  Memory size: 64 MB

As of this commit, it is now confused:

  ABMA devices:
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  <1:3000> at 0x00000000 irq 0
  ...

As this test is not working as expected, simply disable it (by
skipping it) for now.

[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg627094.html
[2] https://github.com/HelenOS/helenos/blob/0.6.0/boot/arch/sparc32/src/ambapp.c#L75

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200331105048.27989-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-06 20:03:14 +02:00
Philippe Mathieu-Daudé
b131b49768 tests/acceptance/ppc_prep_40p: Use mirror for ftp.software.ibm.com
To avoid regular failures on Travis-CI with ftp.software.ibm.com,
use a mirror.

Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Willian Rampazzo <willianr@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@gmail.com>
Message-Id: <20200403172919.24621-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-06 20:03:14 +02:00
Philippe Mathieu-Daudé
5cf67ac04f tests/acceptance/ppc_prep_40p: Use cdn.netbsd.org hostname
Use NetBSD content delivery network to get faster downloads.

Suggested-by: Kamil Rytarowski <kamil@netbsd.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200211134504.9156-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-06 20:03:14 +02:00
Oksana Vohchana
002b24c0c7 Acceptance test: Fix to EXEC migration
The exec migration test isn't run a whole test scenario.
This patch fixes it

Fixes: 2e768cb682
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200325113138.20337-1-ovoshcha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-06 20:03:14 +02:00
Cleber Rosa
6fd52d671d Acceptance test: add "boot_linux" tests
This acceptance test, validates that a full blown Linux guest can
successfully boot in QEMU.  In this specific case, the guest chosen is
Fedora version 31.

 * x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as
   accelerators

 * aarch64 and virt machine type, with TCG and KVM as accelerators

 * ppc64 and pseries machine type with TCG as accelerator

 * s390x and s390-ccw-virtio machine type with TCG as accelerator

The Avocado vmimage utils library is used to download and cache the
Linux guest images, and from those images a snapshot image is created
and given to QEMU.  If a qemu-img binary is available in the build
directory, it's used to create the snapshot image, so that matching
qemu-system-* and qemu-img are used in the same test run.  If qemu-img
is not available in the build tree, one is attempted to be found
installed system-wide (in the $PATH).  If qemu-img is not found in the
build dir or in the $PATH, the test is canceled.

The method for checking the successful boot is based on "cloudinit"
and its "phone home" feature.  The guest is given an ISO image with
the location of the phone home server, and the information to post
(the instance ID).  Upon receiving the correct information, from the
guest, the test is considered to have PASSed.

This test is currently limited to user mode networking only, and
instructs the guest to connect to the "router" address that is hard
coded in QEMU.

To create the cloudinit ISO image that will be used to configure the
guest, the pycdlib library is also required and has been added as
requirement to the virtual environment created by "check-venv".

The console output is read by a separate thread, by means of the
Avocado datadrainer utility module.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2020-03-17 18:55:52 -04:00
Cleber Rosa
b44513b13d Acceptance tests: introduce BUILD_DIR and SOURCE_DIR
Some tests may benefit from using resources from a build directory.
This introduces three variables that can help tests find resources in
those directories.

First, a BUILD_DIR is assumed to exist, given that the primary form of
running the acceptance tests is from a build directory (which may or
may not be the same as the source tree, that is, the SOURCE_DIR).

If the directory containing the acceptance tests happens to be a link
to a directory, it's assumed to it points to the source tree
(SOURCE_DIR), which is the behavior defined on the QEMU Makefiles.  If
the directory containing the acceptance tests is not a link, then a
in-tree build is assumed, and the BUILD_DIR and SOURCE_DIR have the
same value.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2020-03-17 18:54:23 -04:00
Philippe Mathieu-Daudé
921589fb72 tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
This test boots U-Boot then NetBSD (stored on a SD card) on
a OrangePi PC board.

As it requires ~1.3GB of storage, it is disabled by default.

U-Boot is built by the Debian project [1], and the SD card image
is provided by the NetBSD organization [2].

Once the compressed SD card image is downloaded (304MB) and
extracted, this test is fast:

  $ AVOCADO_ALLOW_LARGE_STORAGE=yes \
    avocado --show=app,console run -t machine:orangepi-pc \
      tests/acceptance/boot_linux_console.py
  console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000)
  console: DRAM: 1024 MiB
  console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner Technology
  console: CPU:   Allwinner H3 (SUN8I 0000)
  console: scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
  console: scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
  console: scanning usb for storage devices... 0 Storage Device(s) found
  console: Hit any key to stop autoboot:  0
  console: => setenv bootargs root=ld0a
  console: => setenv kernel netbsd-GENERIC.ub
  console: => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb
  console: => boot
  console: ## Booting kernel from Legacy Image at 42000000 ...
  console: Image Name:   NetBSD/earmv7hf 9.0_RC1
  console: Image Type:   ARM Linux Kernel Image (no loading done) (uncompressed)
  console: XIP Kernel Image (no loading done)
  console: Loading Device Tree to 49ff6000, end 49fffe01 ... OK
  console: Starting kernel ...
  console: [   1.0000000] NetBSD/evbarm (fdt) booting ...
  console: [   1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
  console: [   1.0000000]         mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC
  console: [   1.0000000] total memory = 1024 MB
  console: [   1.0000000] avail memory = 1003 MB
  console: [   1.0000000] armfdt0 (root)
  console: [   1.0000000] simplebus0 at armfdt0: Xunlong Orange Pi PC
  console: [   1.0000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core)
  console: [   1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
  console: [   1.0000000] cpu0: 32KB/64B 2-way L1 VIPT Instruction cache
  console: [   1.0000000] cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
  console: [   1.0000000] cpu0: 2304KB/64B 16-way write-through L2 PIPT Unified cache
  console: [   1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
  ...
  console: [   2.3812082] sdmmc0: SD card status: 4-bit, C0
  console: [   2.3812082] ld0 at sdmmc0: <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062>
  console: [   2.4012856] ld0: 1226 MB, 622 cyl, 64 head, 63 sec, 512 bytes/sect x 2511872 sectors
  console: [   2.5321222] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
  console: [   3.1068718] WARNING: 4 errors while detecting hardware; check system log.
  console: [   3.1179868] boot device: ld0
  console: [   3.1470623] root on ld0a dumps on ld0b
  console: [   3.2464436] root file system type: ffs
  console: [   3.2897123] kern.module.path=/stand/evbarm/9.0/modules
  console: Mon Feb 17 20:33:35 UTC 2020
  console: Starting root file system check:
  PASS (35.96 s)
  RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 36.09 s

Note, this test only took ~65 seconds to run on Travis-CI, see: [3].

This test is based on a description from Niek Linnenbank from [4].

[1] https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot
[2] https://wiki.netbsd.org/ports/evbarm/allwinner/
[3] https://travis-ci.org/philmd/qemu/jobs/638823612#L3778
[4] https://www.mail-archive.com/qemu-devel@nongnu.org/msg669347.html

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-18-nieklinnenbank@gmail.com
[NL: changed test to use NetBSD 9.0 final release and -global allwinner-rtc.base-year]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
784b879638 tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
This test boots Ubuntu Bionic on a OrangePi PC board.

As it requires 1GB of storage, and is slow, this test is disabled
on automatic CI testing.

It is useful for workstation testing. Currently Avocado timeouts too
quickly, so we can't run userland commands.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The Ubuntu image is downloaded from:
https://dl.armbian.com/orangepipc/Bionic_current

This test can be run using:

  $ AVOCADO_ALLOW_LARGE_STORAGE=yes \
    avocado --show=app,console run -t machine:orangepi-pc \
      tests/acceptance/boot_linux_console.py
  console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100)
  console: DRAM: 1024 MiB
  console: Failed to set core voltage! Can't set CPU frequency
  console: Trying to boot from MMC1
  console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology
  console: CPU:   Allwinner H3 (SUN8I 0000)
  console: Model: Xunlong Orange Pi PC
  console: DRAM:  1 GiB
  console: MMC:   mmc@1c0f000: 0
  [...]
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  [...]
  console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  console: done.
  console: Begin: Running /scripts/local-bottom ... done.
  console: Begin: Running /scripts/init-bottom ... done.
  console: systemd[1]: systemd 237 running in system mode. (...)
  console: systemd[1]: Detected architecture arm.
  console: Welcome to Ubuntu 18.04.3 LTS!
  console: systemd[1]: Set hostname to <orangepipc>.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: changed test to boot from SD card via BootROM, added check for 7z]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
de2749bcb2 tests/boot_linux_console: Add a SD card test for the OrangePi PC board
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  [...]
  console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
  console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
  console: ledtrig-cpu: registered to indicate activity on CPUs
  console: hidraw: raw HID events driver (C) Jiri Kosina
  console: usbcore: registered new interface driver usbhid
  console: usbhid: USB HID core driver
  console: Initializing XFRM netlink socket
  console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
  console: NET: Registered protocol family 10
  console: mmc0: host does not support reading read-only switch, assuming write-enable
  console: mmc0: Problem switching card into high-speed mode!
  console: mmc0: new SD card at address 4567
  console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
  [...]
  console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
  console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
  console: VFS: Mounted root (ext2 filesystem) on device 179:0.
  console: Run /sbin/init as init process
  console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl
  console: Starting syslogd: OK
  console: Starting klogd: OK
  console: Populating /dev using udev: udevd[203]: starting version 3.2.7
  console: /bin/sh: can't access tty; job control turned off
  console: cat /proc/partitions
  console: / # cat /proc/partitions
  console: major minor  #blocks  name
  console: 1        0       4096 ram0
  console: 1        1       4096 ram1
  console: 1        2       4096 ram2
  console: 1        3       4096 ram3
  console: 179        0      61440 mmcblk0
  console: reboot
  console: / # reboot
  console: umount: devtmpfs busy - remounted read-only
  console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
  console: The system is going down NOW!
  console: Sent SIGTERM to all processes
  console: Sent SIGKILL to all processes
  console: Requesting system reboot
  console: reboot: Restarting system
  JOB TIME   : 68.64 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: extend test with ethernet device checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
c40b1ded0a tests/boot_linux_console: Add initrd test for the Orange Pi PC board
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  [...]
  console: Trying to unpack rootfs image as initramfs...
  console: Freeing initrd memory: 3256K
  console: Freeing unused kernel memory: 1024K
  console: Run /init as init process
  console: mount: mounting devtmpfs on /dev failed: Device or resource busy
  console: Starting logging: OK
  console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
  console: done.
  console: Starting network: OK
  console: Found console ttyS0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: Boot successful.
  console: cat /proc/cpuinfo
  console: / # cat /proc/cpuinfo
  console: processor      : 0
  console: model name     : ARMv7 Processor rev 5 (v7l)
  console: BogoMIPS       : 125.00
  console: Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
  console: CPU implementer        : 0x41
  console: CPU architecture: 7
  console: CPU variant    : 0x0
  console: CPU part       : 0xc07
  console: CPU revision   : 5
  [...]
  console: processor      : 3
  console: model name     : ARMv7 Processor rev 5 (v7l)
  console: BogoMIPS       : 125.00
  console: Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
  console: CPU implementer        : 0x41
  console: CPU architecture: 7
  console: CPU variant    : 0x0
  console: CPU part       : 0xc07
  console: CPU revision   : 5
  console: Hardware       : Allwinner sun8i Family
  console: Revision       : 0000
  console: Serial         : 0000000000000000
  console: cat /proc/iomem
  console: / # cat /proc/iomem
  console: 01000000-010fffff : clock@1000000
  console: 01c00000-01c00fff : system-control@1c00000
  console: 01c02000-01c02fff : dma-controller@1c02000
  [...]
  console: reboot
  console: / # reboot
  console: / # Found console ttyS0
  console: Stopping network: OK
  console: hrtimer: interrupt took 21852064 ns
  console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read)
  console: done.
  console: Stopping logging: OK
  console: umount: devtmpfs busy - remounted read-only
  console: umount: can't unmount /: Invalid argument
  console: The system is going down NOW!
  console: Sent SIGTERM to all processes
  console: Sent SIGKILL to all processes
  console: Requesting system reboot
  console: reboot: Restarting system
  PASS (48.32 s)
  JOB TIME   : 49.16 s

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
5abe9f0baa tests/boot_linux_console: Add a quick test for the OrangePi PC board
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ make check-venv
  $ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  JOB ID     : 2e4d15eceb13c33672af406f08171e6e9de1414a
  JOB LOG    : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log
  (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  console: Memory policy: Data cache writealloc
  console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000'
  console: cma: Failed to reserve 128 MiB
  console: psci: probing for conduit method from DT.
  console: psci: PSCIv0.2 detected in firmware.
  console: psci: Using standard PSCI v0.2 function IDs
  console: psci: Trusted OS migration not required
  console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0
  console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728
  console: Built 1 zonelists, mobility grouping on.  Total pages: 32480
  console: Kernel command line: printk.time=0 console=ttyS0,115200
  PASS (8.59 s)
  JOB TIME   : 8.81 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
15b1bdca1e tests/acceptance/integratorcp: Verify Tux is displayed on framebuffer
Add a test that verifies the Tux logo is displayed on the framebuffer.

We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html

When OpenCV and NumPy are installed, this test can be run using:

  $ AVOCADO_ALLOW_UNTRUSTED_CODE=hmmm \
    avocado --show=app,framebuffer run -t device:framebuffer \
      tests/acceptance/machine_arm_integratorcp.py
  JOB ID     : 8c46b0f8269242e87d738247883ea2a470df949e
  JOB LOG    : avocado/job-results/job-2020-01-31T21.38-8c46b0f/job.log
   (1/1) tests/acceptance/machine_arm_integratorcp.py:IntegratorMachine.test_framebuffer_tux_logo:
  framebuffer: found Tux at position [x, y] = (0, 0)
  PASS (3.96 s)
  RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 4.23 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20200225172501.29609-5-philmd@redhat.com
Message-Id: <20200131211102.29612-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
Philippe Mathieu-Daudé
595f1acaa4 tests/acceptance: Extract boot_integratorcp() from test_integratorcp()
As we want to re-use this code, extract it as a new function.
Since we are using the PL011 serial console, add a Avocado tag
to ease filtering of tests.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
Thomas Huth
5e0ac7e069 tests/acceptance: Add a test for the integratorcp arm machine
There is a kernel and initrd available on github which we can use
for testing this machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-3-philmd@redhat.com
Message-Id: <20200131170233.14584-1-thuth@redhat.com>
[PMD: Renamed test method, moved description from class to method]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
Thomas Huth
050a82f0c5 tests/acceptance: Add a test for the N800 and N810 arm machines
Old kernels from the Meego project can be used to check that Linux
is at least starting on these machines.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-2-philmd@redhat.com
Message-Id: <20200129131920.22302-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
Philippe Mathieu-Daudé
0484d9d4fb tests/acceptance: Count multiple Tux logos displayed on framebuffer
Add a test that verifies that each core properly displays the Tux
logo on the framebuffer device.

We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html

When OpenCV and NumPy are installed, this test can be run using:

  $ avocado --show=app,framebuffer \
    run -t cpu:i6400 \
    tests/acceptance/machine_mips_malta.py
  JOB ID     : 54f3d8efd8674f289b8aa01a87f5d70c5814544c
  JOB LOG    : avocado/job-results/job-2020-02-01T20.52-54f3d8e/job.log
   (1/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_1core:
  framebuffer: found Tux at position (x, y) = (0, 0)
  PASS (3.37 s)
   (2/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_7cores:
  framebuffer: found Tux at position (x, y) = (0, 0)
  framebuffer: found Tux at position (x, y) = (88, 0)
  framebuffer: found Tux at position (x, y) = (176, 0)
  framebuffer: found Tux at position (x, y) = (264, 0)
  framebuffer: found Tux at position (x, y) = (352, 0)
  framebuffer: found Tux at position (x, y) = (440, 0)
  framebuffer: found Tux at position (x, y) = (528, 0)
  PASS (5.80 s)
   (3/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_8cores:
  framebuffer: found Tux at position (x, y) = (0, 0)
  framebuffer: found Tux at position (x, y) = (88, 0)
  framebuffer: found Tux at position (x, y) = (176, 0)
  framebuffer: found Tux at position (x, y) = (264, 0)
  framebuffer: found Tux at position (x, y) = (352, 0)
  framebuffer: found Tux at position (x, y) = (440, 0)
  framebuffer: found Tux at position (x, y) = (528, 0)
  framebuffer: found Tux at position (x, y) = (616, 0)
  PASS (6.67 s)
  RESULTS    : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 16.79 s

If the AVOCADO_CV2_SCREENDUMP_PNG_PATH environment variable is set, the
test will save the screenshot with matched squares to it.

Test inspired by the following post:
https://www.mips.com/blog/how-to-run-smp-linux-in-qemu-on-a-mips64-release-6-cpu/
Kernel built with the following Docker file:
https://github.com/philmd/qemu-testing-blob/blob/malta_i6400/mips/malta/mips64el/Dockerfile

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200201204751.17810-1-f4bug@amsat.org>
2020-02-27 14:19:07 +01:00
Philippe Mathieu-Daudé
273954e782 tests/acceptance: Remove shebang header
Patch created mechanically by running:

  $ chmod 644 $(git grep -lF '#!/usr/bin/env python' \
      | xargs grep -L 'if __name__.*__main__')
  $ sed -i "/^#\!\/usr\/bin\/\(env\ \)\?python.\?$/d" \
      $(git grep -lF '#!/usr/bin/env python' \
      | xargs grep -L 'if __name__.*__main__')

Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-8-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
5427ecd4ab tests/acceptance/migration: Default to -nodefaults
We don't need the default options to run this test.

This fixes errors when running a binary built with
--without-default-devices such:

  ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-28-philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
a091864943 tests/acceptance/migration: Add the 'migration' tag
By using an Avocado tag, we can run all tests described by that
tag as once:

  $ avocado --show=app run -t migration tests/acceptance/
  JOB ID     : 165477737509503fcfa6d7108057a0a18f2a6559
  JOB LOG    : avocado/job-results/job-2020-02-04T17.29-1654777/job.log
   (1/3) tests/acceptance/migration.py:Migration.test_migration_with_tcp_localhost: PASS (0.38 s)
   (2/3) tests/acceptance/migration.py:Migration.test_migration_with_unix: PASS (0.33 s)
   (3/3) tests/acceptance/migration.py:Migration.test_migration_with_exec: PASS (0.07 s)
  RESULTS    : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0

Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200204163304.14616-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Oksana Vohchana
2e768cb682 tests/acceptance/migration: Test EXEC transport when migrating
Along with VM migration via TCP, we can use migration through
the EXEC transport protocol

Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Oksana Vohchana
b2cf8d4704 tests/acceptance/migration: Test UNIX transport when migrating
Along with VM migration via TCP, we can use migration through
the UNIX transport protocol

Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Oksana Vohchana
63adf16d4f tests/acceptance/migration: Factor out do_migrate()
We are going to reuse this code when testing different transport
methods, so factor it out first.

Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Oksana Vohchana
d7c9a83344 tests/acceptance/migration: Factor out assert_migration()
We are going to reuse this code when testing different transport
methods, so factor it out first

Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
b79e55f09b tests/acceptance/version: Default to -nodefaults
We don't need the default options to run this test.

This fixes errors when running a binary built with
--without-default-devices such:

  ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-29-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
1d77f1b14f tests/acceptance/boot_linux_console: Do not use VGA on Clipper machine
As we only read the serial console, we don't need to force a
VGA display. This fixes when running a binary built with
--without-default-devices:

  ERROR: qemu-system-alpha: standard VGA not available

We also need the '-nodefaults' argument to avoid:

  ERROR: qemu-system-alpha: Unsupported NIC model: e1000

Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-27-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
2d6a6e238a tests/acceptance/virtio_check_params: Disable the test
This test fails on various CI:

- Using QEMU 4.0:
  tests/acceptance/x86_cpu_model_versions.py:X86CPUModelAliases.test_none_alias:  ERROR: 'alias-of' (0.45 s)

- On OSX
  Unexpected error in object_property_find() at qom/object.c:1201:
  qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found

- When removing unavailable machine:
  VirtioMaxSegSettingsCheck.test_machine_types: ERROR: list.remove(x): x not in list (0.12 s)

- Using Xen:
  xencall: error: Could not obtain handle on privileged command interface: No such file or directory
  xen be core: xen be core: can't open xen interface

- On PPC:
  TestFail: machine type pseries-2.8: No Transactional Memory support in TCG, try appending -machine cap-htm=off

- On S390X configured with --without-default-devices:
  ERROR: qemu-system-s390x: -device virtio-scsi-pci,id=scsi0: 'virtio-scsi-pci' is not a valid device model name

Disable it for now.

Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200206171715.25041-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
77f50e826f tests/acceptance/virtio_check_params: Default to -nodefaults
We don't need the default options to run this test.

This fixes errors when running a binary built with
--without-default-devices such:

  ERROR: qemu-system-s390x: Unknown device 'virtio-net-ccw' for bus 'virtual-css-bus'

Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-25-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
e435f66bd3 tests/acceptance/virtio_check_params: List machine being tested
Add logging for easier debugging of failures:

  $ avocado --show=machine run tests/acceptance/virtio_check_params.py
   (1/1) tests/acceptance/virtio_check_params.py:VirtioMaxSegSettingsCheck.test_machine_types:
  machine: {'name': 'pc-i440fx-2.12', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
  machine: {'name': 'pc-i440fx-2.0', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
  machine: {'name': 'pc-q35-4.2', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
  machine: {'name': 'pc-i440fx-2.5', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
  machine: {'name': 'pc-i440fx-4.2', 'seg_max_adjust': 'false', 'device': 'virtio-scsi-pci'}
  ...

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200129212345.20547-19-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
0400937be1 tests/acceptance/virtio_check_params: Improve exception logging
Message-Id: <20200129212345.20547-18-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Denis Plotnikov
47d4c6e696 tests: rename virtio_seg_max_adjust to virtio_check_params
Since, virtio_seg_max_adjust checks not only seg_max, but also
virtqueue_size parameter, let's make the test more general and
add new parameters to be checked there in the future.

Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20200129140702.5411-5-dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Thomas Huth
b0065e1f19 tests/acceptance: Add boot tests for some of the QEMU advent calendar images
The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.

Let's also make sure that we build the corresponding machines in Travis.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00
Philippe Mathieu-Daudé
b6f0a43463 tests/boot_linux_console: Tag Emcraft Smartfusion2 as running 'u-boot'
Avocado tags are handy to automatically select tests matching
the tags. Since this test also runs U-Boot, tag it.

We can run all the tests using U-Boot as once with:

  $ avocado --show=app run -t u-boot tests/acceptance/
  JOB LOG    : avocado/job-results/job-2020-01-21T00.16-ee9344e/job.log
   (1/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2: PASS (16.59 s)
   (2/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot: PASS (0.47 s)
   (3/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: PASS (2.43 s)
  RESULTS    : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 19.78 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07 15:12:48 +01:00