This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to eliminate calls to qemu_aio_flush() since the function is
being removed. Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.
Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There has been confusion between various aio wait and flush functions.
It's time to get rid of qemu_aio_flush() but in the aio test cases we
really do want this low-level functionality.
Therefore declare a local wait_for_aio() helper for the test cases.
Drop the aio_flush() test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:
+- cmos_io_port_write
+-- check_update_timer
+---- get_next_alarm
+------ rtc_update_time
In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The cancellation test is failing on the buildbots. While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test. Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/build-urgent:
Makefile: Add missing dependency (fix parallel builds)
tests: link in stubs
libcacard: link in stubs
libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ST0 shouldn't include 0x20 (FD_SR0_SEEK) after READ ID.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Do not always set FD_SR0_SEEK, as callers already set it if needed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new options are tested with blkdebug on both the source and the
target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the century byte in the RTC emulation, and test that it works.
This leads to some annoying compatibility code because we need to treat
a value of 2000 for the base_year property as "use the century byte
properly" (which would be a value of 0).
The century byte will now be always-zero, rather than always-20,
for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a
(Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24)
correctly said:
With an epoch of 1980 and a year of 2009, one could argue that [the
century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS
does not read the century byte.
so I picked the simplest and most sensible implementation which is to
return 0 for 1980-2079, 1 for 2080-2179 and so on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When setting a date in 1980, Linux is actually disregarding the century
byte and setting the year to 2080. This causes a year-2038 overflow
in mktimegm. Fix this by doing the days-to-seconds computation in
64-bit math.
Reported-by: Lucas Meneghel Rodrigues <lookkas@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite difficult to debug qtest test cases without extra wrapper
scripts for QEMU or similar. This patch adds a simple environment
variable-based trigger that sends a STOP signal to the QEMU instance
under test, before attempting to connect to its QMP session.
This will block execution of the testcase and give time to attach a
debugger to the stopped QEMU process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test case checks that streaming completes successfully when the
backing file is smaller than the image file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.
To reproduce the bug, run:
$ make check # succeeds
$ echo B0RKED > hw/mc146818rtc_regs.h
$ make check # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't overwrite / leak previously set errors.
Make traversal cope with missing mandatory sub-structs.
Don't try to end a container that could not be started.
v1->v2:
- unchanged
v2->v3:
- instead of examining, assert that we never overwrite errors with
error_set()
- allow visitors to set a NULL struct pointer successfully, so traversal
of incomplete objects can continue
- check for a NULL "obj" before accessing "(*obj)->has_XXX" (this is not a
typo, "obj != NULL" implies "*obj != NULL" here)
- fix start_struct / end_struct balance for unions as well
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each test litters /tmp with several files: a pid file and two
sockets. Tidy up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling sense interrupt status while there is no interrupt should
return invalid command (0x80).
Read command should always returns in st0 seek_end bit set to 1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After rewrite DSKCHG bit handling the test has to be updated. Now
is needed to seek to different track to clear DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From Markus:
Makes "make check" hang:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 gtester -k --verbose -m=quick tests/crash-test tests/rtc-test
TEST: tests/crash-test... (pid=972)
qemu-system-x86_64: Device needs media, but drive is empty
[Nothing happens, wait a while, then hit ^C]
make: *** [check-qtest-x86_64] Interrupt
This was due to the fact that we weren't checked for errors when
reading from the QMP socket. This patch adds appropriate error
checking.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
accept() expects address_len to point to the length of the sockaddr on
input. Initialize it accordingly.
Resolves an assertion due to EFAULT on illumos.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This new test validates the autoclear feature bit behavior. When QEMU
opens a qcow2v3 image file with an unknown autoclear feature bit the bit
should be cleared in the image file header.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new command sets feature bits in the image file header:
qcow2.py set-feature-bit incompatible|compatible|autoclear <bit>
The bit number must be in the range [0, 64).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you try to read from a floppy drive without a media, you should get
an abnormal termination error.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one is a bit more interesting. The COW operation isn't performed
completely synchronously, and therefore dependencies must be handled
correctly when multiple requests write to the same unallocated cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we're still missing these very basic tests for backing file
handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This way, they will not execute any VM code at all. However, right now
the cancellation test is "relying" on being slowed down by TCG executing
BIOS code. So, change the timeouts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TestStreamStop test case is racy; if the job completes before we can
cancel it, it fails. If we remove the sleep the job will be canceled
before it has even started, and the test succeeds but it is also not
testing anything interesting.
But if the image is left sparse, then the job has really nothing to do.
For qcow2 it will read one L2-table, for raw it will issue a bunch of
ioctls. This also falls under "not testing anything interesting", and
this may be happening right now (depending on the filesystem) since the
file protocol got an is_allocated method.
Filling the test image with data ensures that the test covers the
intended case. It also slows down the test, which will be particularly
important after the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it much more understandable, add a missing
iov_cnt argument (number of iovs in the iov), and
add comments to it.
The new implementation has been extensively tested
by splitting a large buffer into many small
randomly-sized chunks, sending it over socket to
another, slow process and verifying the receiving
data is the same.
Also add a unit test for iov_send_recv(), sending/
receiving data between two processes over a socketpair
using random vectors and random sizes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* afaerber-or/qom-next-1:
target-i386: Use uint32 visitor for [x]level properties
qdev: Remove PropertyInfo range checking
qdev: Switch property accessors to fixed-width visitor interfaces
qdev: Use int32_t container for devfn property
qapi: Add String visitor coverage to serialization unit tests
qapi: String visitor, use %f representation for floats
qapi: Unit tests for visitor-based serialization
qapi: Add Visitor interfaces for uint*_t and int*_t
Currently string-output-visitor formats floats as %g, which is nice in
that trailing 0's are automatically truncated, but otherwise this causes
some issues:
- it uses 6 significant figures instead of 6 decimal places, which
means something like 155777.5 (which even has an exact floating point
representation) will be rounded to 155778 when converted to a string.
- output will be presented in scientific notation when the normalized
form requires a 10^x multiplier. Not a huge deal, but arguably less
readable for command-line arguments.
- due to using scientific notation for numbers requiring more than 6
significant figures, instead of hard-defined decimal places, it
fails a lot of the test-visitor-serialization unit tests for floats.
Instead, let's just use %f, which is what the QJSON and the QMP visitors
use.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently we test our visitors individually, and seperately for input
vs. output. This is useful for validating internal representations
against the native C types and vice-versa, and other visitor-specific
testing, but it doesn't cover the potential use-case of using visitor
pairs for serialization/deserialization very well, and makes it
hard to easily extend the coverage for different C types / boundary
conditions.
To cover that we add a set of unit tests that takes a number of native C
values, passes them into an output visitor, extracts the values with an
input visitor, then compares the result to the original.
Plugging in new visitors to the test harness only requires a user to
implement the SerializeOps interface and add it to a list.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes implementations of all iov_*
functions, completing the previous step.
All iov_* functions now ensure that this offset
argument is within the iovec (using assertion),
but lets to specify `bytes' value larger than
actual length of the iovec - in this case they
stops at the actual end of iovec. It is also
suggested to use convinient `-1' value as `bytes'
to mean just this -- "up to the end".
There's one very minor semantic change here: new
requiriment is that `offset' points to inside of
iovec. This is checked just at the end of functions
(assert()), it does not actually need to be enforced,
but using any of these functions with offset pointing
past the end of iovec is wrong anyway.
Note: the new code in iov.c uses arithmetic with
void pointers. I thought this is not supported
everywhere and is a GCC extension (indeed, the C
standard does not define void arithmetic). However,
the original code already use void arith in
iov_from_buf() function:
(memcpy(..., buf + buf_off,...)
which apparently works well so far (it is this
way in qemu 1.0). So I left it this way and used
it in other places.
While at it, add a unit-test file test-iov.c,
to check various corner cases with iov_from_buf(),
iov_to_buf() and iov_memset().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As default a guest has always one floppy drive so 0x10 byte in CMOS
has to have 0x40 value. Higher 4 bits means that the first floppy drive
is 1.44 Mb 3"5 drive and lower 4 bits means the second drive is not present.
After the guest starts DSKCHG bit in DIR register should be set. If there
is no media in drive, this bit should be set all the time.
Because we start the guest without media in drive, we have to swap
'eject' and 'change' in 'test_media_change'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 93e9eb6808 added fdc-test,
but accidentally removed rtc-test because check-qtest-i386-y was
not enhanced but set twice.
This patch adds rtc-test again (and sorts both tests alphabetically).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
