As we will not have a cpu_x86_find_by_name() function anymore,
move the KVM default-vendor hack to instance_init.
Unfortunately we can't move that code to class_init because it depends
on KVM being initialized.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As eventually the x86_def_t data is going to be provided by the CPU
class, it's better to not touch it, and handle the special cases on the
X86CPU object itself.
Current behavior of the code should stay exactly the same.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is already able to eliminate the kvm_arch_get_supported_cpuid()
calls in kvm_cpu_fill_host() and filter_features_for_kvm(), so we can
eliminate the CONFIG_KVM #ifdefs there.
Also, kvm_cpu_fill_host() and host_cpuid() don't need to check
CONFIG_KVM, as they don't have any KVM-specific function calls.
Tested to build successfully with CONFIG_KVM disabled, using the
following CFLAGS combinations: "-DNDEBUG", "-DNDEBUG -O', "-DNDEBUG
-O0", "-DNDEBUG -O1", "-DNDEBUG -O2".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx
This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MS docs specify HV_X64_MSR_HYPERCALL as a mandatory interface,
thus we must provide the MSRs even if the user only specified
features that, like relaxed timing, in principle don't require them.
And the MSRs are only there if the hypervisor has KVM_CAP_HYPERV.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_init_vcpu's initialization of the KVM leaves at 0x40000100
is broken, because KVM_CPUID_FEATURES is left at 0x40000001. Move
it to 0x40000101 if Hyper-V is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM introduced internal error exit reason and suberror at the same time,
and later extended it with internal error data.
QEMU does not report suberror on hosts between these two events because
we check for the extension. (half a year in 2009, but it is misleading)
Fix by removing KVM_CAP_INTERNAL_ERROR_DATA condition on printf.
(partially improved by bb44e0d12d and ba4047cf84 in the past)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
code)
* Similarly, the kernel won't return any entry for 0xC0000001 if
CPUID[0xC0000000].EAX is < 0xC0000001
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf
For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:
* The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UNIX domain sockets are leaked when tests call abort(3) (indirectly via
glib assert functions).
Unlink the files immediately after the connection has been established
to avoid leaks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After starting the QEMU process and initializing the QMP connection, we
can read the pid file and unlink it.
Just stash away the pid instead of the pid filename. This way we can
avoid pid file leaks since running tests may abort(3) without cleanup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Not that many changes as we already have a git snapshot pretty close
to final 1.7.4 in the tree. Most notably change is the vgabios change
which fixes the windows guest regression.
Full git shortlog:
Gerd Hoffmann (2):
run qemu_cfg_e820 only for CONFIG_QEMU=y
change boot order load log level
Kevin O'Connor (10):
Minor - move sgdt/lgdt macros from stacks.c to x86.h.
Separate out sec32init sections even when not doing code relocation.
floppy: Fix incorrect LBA to CHS translation.
floppy: Fix accesses to DOR register.
vgabios: Avoid memory references via %esp register in vgabios.
Small improvements to irqentry_extrastack assembler.
floppy: Encode command and flags into single value in floppy pio code.
On disk format request, verify cylinders and pass to driver.
floppy: Implement cylinder seeking when accessing a different cylinder.
coreboot: Make sure to print the SeaBIOS version in cbmem debug output.
Kyösti Mälkki (1):
Fix CBMEM console overflow
When using $(MAKE) within a makefile, we shouldn't be explicitly
including $(MAKEFLAGS) on the command-line. It causes problems
when that makefile is recursively invoked. When the roms/Makefile
is invoked as in make -C roms bios a spurious 'w' appears on the
sub-make invocation, due to the erroneous $(MAKEFLAGS) inclusion.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
__put_user can write bytes, words (2 bytes) or longwords (4 bytes).
Here obviously words should have been written, but bytes were written,
so values like 0x9c5f were truncated to 0x5f.
Fix this by changing retcode from uint8_t to to uint16_t in
target_signal_frame and also in the unused rt_signal_frame.
This problem was reported by static code analysis (smatch).
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This is an internal error as the CRISv10 should mask interrupts
while executing delay slots. Bail out sooner rather than later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This wires up a spice port event on virtio-ports open/close, so the
client is notified when the other end is ready.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Several small signedness / overflow corrections to qxl_create_guest_primary:
1. use 64 bit unsigned for size to avoid overflow possible from two 32
bit multiplicants.
2. correct sign for requested_height
3. add a more verbose error message when setting guest bug state (which
causes a complete guess blackout until reset, so it helps if it is
verbose).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without this we occasionally trigger an assert at
hw/pci/pci.c:pcibus_reset that asserts the irq_count is zero on reset.
This has become a problem with the new drm driver for linux, since doing
a reboot from console causes a race between console updates that set the
irq and the reset assertion that the irq is clear.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently we fail getattr request altogether if we can't read
P9_STATS_GEN for some reason. It breaks valid use cases:
E.g let's assume we have non-readable directory with execution bit set
on host and we export it to client over 9p On host we can chdir into
directory, but not open directory on read and list content.
But if client will try to call getattr (as part of chdir(2)) for the
directory it will fail with -EACCES. It happens because we try to open
the directory on read to call ioctl(FS_IOC_GETVERSION), it fails and we
return the error code to client.
It's excessive. The solution is to make P9_STATS_GEN failure non-fatal
for getattr request. Just don't set P9_STATS_GEN flag in result mask on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we silently ignore getversion requests for anything except
file or directory. Let's instead return ENOTTY error to indicate that
getversion is not supported. It makes implementation consistent on
all not-supported cases.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
All get_st_gen() implementations except handle_ioc_getversion() have
guard for undefined FS_IOC_GETVERSION. Let's add it there too.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
v9fs_co_st_gen() expects to see error code in errno, not in return code.
Let's fix this.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* implementation of first part of the A64 Neon instruction set
* v8 AArch32 rounding and 16<->64 fp conversion instructions
* fix MIDR value on Zynq boards
* some minor bugfixes/code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=KIzb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20140131' into staging
target-arm queue:
* implementation of first part of the A64 Neon instruction set
* v8 AArch32 rounding and 16<->64 fp conversion instructions
* fix MIDR value on Zynq boards
* some minor bugfixes/code cleanups
# gpg: Signature made Fri 31 Jan 2014 15:06:34 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* pmaydell/tags/pull-target-arm-20140131: (34 commits)
arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes
arm_gic: Introduce define for GIC_NR_SGIS
target-arm: A64: Add SIMD shift by immediate
target-arm: A64: Add simple SIMD 3-same floating point ops
target-arm: A64: Add integer ops from SIMD 3-same group
target-arm: A64: Add logic ops from SIMD 3 same group
target-arm: A64: Add top level decode for SIMD 3-same group
target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops
target-arm: A64: Add SIMD three-different ABDL instructions
target-arm: A64: Add SIMD three-different multiply accumulate insns
target-arm: Add AArch32 SIMD VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 FP VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 SIMD VRINTA, VRINTN, VRINTP, VRINTM, VRINTZ
target-arm: Add set_neon_rmode helper
target-arm: Add support for AArch32 SIMD VRINTX
target-arm: Add support for AArch32 FP VRINTX
target-arm: Add support for AArch32 FP VRINTZ
target-arm: Add support for AArch32 FP VRINTR
target-arm: Add AArch32 FP VRINTA, VRINTN, VRINTP and VRINTM
target-arm: Move arm_rmode_to_sf to a shared location.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a compiler warning with -Werror=missing-format-attribute
and allows improved compiler checks for variable argument lists.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c9baa30f42 failed to
delete all of the relevant code, leading to Werrors about
unused symbols.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of packing BiosLinkerLoaderEntry, an unused global variable called
QEMU_PACKED was created (detected by smatch static code analysis).
Including qemu-common.h gets the right definition and also includes some
standard include files which now can be removed here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
osdep.c does not use trace_*() so we can just drop the include.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not rely on int8_t (and friends) not being preprocessor
symbols (or symbols expanding to themselves). On NetBSD (for example) the
glue(u, SDATA_TYPE) results in u__int8_t, which is undefined. There is no way
to stop cpp expanding inner macros, so just add the few lines explicitly and
get rid of the magic.
Signed-off-by: Martin Husemann <martin@NetBSD.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 071 test is designed for IMGFMT=qcow2 because it uses the l2_load
blkdebug event. Its output filtering also assumes that IMGFMT is not
raw since 071.out contains "format=raw" but IMGFMT=raw would filter the
output to "format=IMGFMT".
Perhaps the test case can be rewritten to be more generic, but for now
let's document that it was only supposed to work with qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is exactly assert_no_active_block_jobs in iotests.py
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
