Commit Graph

48 Commits

Author SHA1 Message Date
Peter Maydell
e532b2e008 usb: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-20-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:23 +00:00
Markus Armbruster
e43bfd9c87 error: Use error_prepend() where it makes obvious sense
Done with this Coccinelle semantic patch

    @@
    expression FMT, E1, E2;
    expression list ARGS;
    @@
    -    error_setg(E1, FMT, ARGS, error_get_pretty(E2));
    +    error_propagate(E1, E2);/*###*/
    +    error_prepend(E1, FMT/*@@@*/, ARGS);

followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().

We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty().  This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints.  It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:17 +01:00
Markus Armbruster
c29b77f955 error: Use error_reportf_err() where it makes obvious sense
Done with this Coccinelle semantic patch

    @@
    expression FMT, E, S;
    expression list ARGS;
    @@
    -    error_report(FMT, ARGS, error_get_pretty(E));
    +    error_reportf_err(E, FMT/*@@@*/, ARGS);
    (
    -    error_free(E);
    |
	 exit(S);
    |
	 abort();
    )

followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.

We now use the error whole instead of just its message obtained with
error_get_pretty().  This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:17 +01:00
Gerd Hoffmann
974826f0ab usb: print device id in "info usb" monitor command
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-20 09:15:23 +02:00
Markus Armbruster
d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster
2e269f3d9d usb: Improve companion configuration error messages
The previous commit broke the additional messages explaining the error
messages.  Improve the error messages, so they don't need explaining
so much.  Helps QMP users as well, unlike additional explanations.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-17 14:11:43 +01:00
Markus Armbruster
f4bbaaf584 usb: Propagate errors through usb_register_companion()
This loses the messages explaining the error printed with
error_printf_unless_qmp().  The next commit will make up for the loss.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-17 14:11:42 +01:00
Peter Maydell
68b459eaa6 hmp: Normalize HMP command handler names
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5HCgAAoJEDhwtADrkYZT0gcP/ijfMUqLlOPMagm5ggDCx/HK
 IFFgcrynQNS6FwTNSIEW04So4q2EMbqwuTEpZ5pe330brGy0U/UgkVmz76BkyoXT
 9LcgKwtVytfc/niF4k5nIKXrasNG1DHPrhd+zx/oTvwmC/8r+NqHZoPOjNaOPLCX
 18SWJMy57l47XAzVOUoFHEW3mEO5YjF8qo3eRcbUWEWXkRp6wg/d2f9nkiHIAfcB
 0XVso0PUJ3jID/WkNqb9JoexTnH5rQSkbeJVZWed8iSAt2cCi+pnE/RjL75M9VF8
 3mPh2Zhi1lEV4qsYQH1OY7909RtKIj7EBDd7kuUWBi1oSIEaIn5GjNWBGCmBbPbY
 0ZVhGFXFvvtI+tPEK3aqRSlyENReT29oKfEv0LAKoUQFBl+jb7qqBns4cfOF+i26
 Tb4cnzqN1rdnlCNemTQATOrr01JAZEkdp3NHq+Bx967ocP3zxfL+pX2Q/3S8aFDs
 j9Ynq+3FvweeDKeYbHKKscELII1DZcNs1CYJOtJIl+XgzowfgpoTRP7P/e2qFM+z
 ey5qF8nc3mW8tVSkotMeeseFe9tj1xxIV+CslTRiYqnxHnmq4HgsN3DoDtnyy9De
 g3U0d9rgBKFPEkAWXg939GXbH2HVUqLkOSy50WGRruP4dzco7BhLyhQimqPchBFj
 b7P40f6NyWCYDhzJu6+N
 =Kleh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' into staging

hmp: Normalize HMP command handler names

# gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-monitor-2015-02-18:
  hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
  hmp: Name HMP command handler functions hmp_COMMAND()
  hmp: Clean up declarations for long-gone info handlers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25 13:14:37 +00:00
Markus Armbruster
1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Markus Armbruster
599655c91f usb: Change usb_create_simple() to abort on failure
Instead of returning null pointer.  Matches pci_create_simple(),
isa_create_simple(), sysbus_create_simple().  It's unused since the
previous commit, but I'll put it to use again shortly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
bd8b92d5c8 usb: Suppress bogus error when automatic usb-hub creation fails
USBDevice's realize method usb_qdev_realize() automatically creates a
usb-hub when only one port is left.  Creating devices in realize
methods is questionable, but works.

If usb-hub creation fails, an error is reported to stderr, but the
failure is otherwise ignored.  We then create the actual device using
the last port, which may well succeed.

Example:

    $ qemu -nodefaults -S -display none -machine usb=on -monitor stdio
    QEMU 2.2.50 monitor - type 'help' for more information
    (qemu) device_add usb-mouse
    [Repeat 36 times]
    (qemu) info usb
      Device 0.0, Port 1, Speed 12 Mb/s, Product QEMU USB Mouse
      Device 0.0, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
      Device 0.0, Port 2.1, Speed 12 Mb/s, Product QEMU USB Mouse
    [More mice and hubs omitted...]
      Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
    (qemu) device_add usb-mouse
    usb hub chain too deep
    Failed to initialize USB device 'usb-hub'
    (qemu) info usb
    [...]
      Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
      Device 0.0, Port 2.8.8.8.8.8, Speed 12 Mb/s, Product QEMU USB Mouse

Despite the "Failed" message, the command actually succeeded.

In QMP, it's worse.  When adding the 37th mouse via QMP, the command
fails with

    {"error": {"class": "GenericError", "desc": "usb hub chain too deep"}}

Additionally, "Failed to initialize USB device 'usb-hub'" is reported
on stderr.  Despite the command failure, the device was created.  This
is wrong.

Fix by avoiding qdev_init() for usb-hub creation, so we can ignore
errors cleanly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
06f22eb78f usb: Do not prefix error_setg() messages with "Error: "
Because it produces beauties like

    (qemu) usb_add mouse
    Failed to initialize USB device 'usb-mouse': Error: tried to attach usb device QEMU USB Mouse to a bus with no free ports

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
3bc36a401e usb: Improve -usbdevice error reporting a bit
Most LegacyUSBFactory usbdevice_init() methods realize with
qdev_init_nofail(), even though their caller usbdevice_create() can
handle failure.  Okay if it really can't fail (I didn't check), but
somewhat brittle.

usb_msd_init() and usb_bt_init() call qdev_init().  The latter
additionally reports an error when qdev_init() fails.

Realization failure produces multiple error reports: a specific one
from qdev_init(), and generic ones from usb_bt_init(),
usb_create_simple(), usbdevice_create() and usb_parse().

Remove realization from the usbdevice_init() methods.  Realize in
usbdevice_create(), and produce exactly one error message there.  You
still get another one from usb_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
4806ec9b2c usb: usb_create() can't fail, drop useless error handling
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:09 +01:00
Igor Mammedov
5f4d917376 usb: Convert usb devices to hotplug handler API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Gonglei
594a53607e usb-bus: introduce a wrapper function to check speed
In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gonglei
bd2ba2752d usb-bus: remove "init" from USBDeviceClass struct
All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gonglei
7d553f27fc usb-bus: convert USBDeviceClass init to realize
Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:06 +02:00
Gonglei
e5a9bece9b usb: add usb_bus_release function
add global variables releasing logic when the usb buses
were removed or hot-unpluged.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29 12:51:44 +02:00
Markus Armbruster
830cd54fca usb: Fix bootindex for portnr > 9
We identify devices by their Open Firmware device paths.  The encoding
of the host controller and hub port numbers is incorrect:
usb_get_fw_dev_path() formats them in decimal, while SeaBIOS uses
hexadecimal.  When some port number > 9, SeaBIOS will miss the
bootindex (lucky case), or apply it to another device (unlucky case).

The relevant spec[*] agrees with SeaBIOS (and OVMF, for that matter).
Change %d to %x.

Bug can bite only with host controllers or hubs sporting more than ten
ports.  I'm not aware of any.

[*] Open Firmware Recommended Practice: Universal Serial Bus,
Version 1, Section 3.2.1 Device Node Address Representation
http://www.openfirmware.org/1275/bindings/usb/usb-1_0.ps

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

Note: xhci can be configured with up to 15 ports (default is 4 ports).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29 12:51:43 +02:00
Michael S. Tsirkin
719ffe1f5f usb: fix up post load checks
Correct post load checks:
1. dev->setup_len == sizeof(dev->data_buf)
    seems fine, no need to fail migration
2. When state is DATA, passing index > len
   will cause memcpy with negative length,
   resulting in heap overflow

First of the issues was reported by dgilbert.

Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-14 15:24:52 +02:00
Juan Quintela
6e3d652ab2 savevm: Remove all the unneeded version_minimum_id_old (usb)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-14 15:24:51 +02:00
Michael S. Tsirkin
9f8e9895c5 usb: sanity check setup_index+setup_len in post_load
CVE-2013-4541

s->setup_len and s->setup_index are fed into usb_packet_copy as
size/offset into s->data_buf, it's possible for invalid state to exploit
this to load arbitrary data.

setup_len and setup_index should be checked to make sure
they are not negative.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:03 +02:00
Gerd Hoffmann
5319dc7b42 usb: add support for microsoft os descriptors
This patch adds support for special usb descriptors used by microsoft
windows.  They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.

As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-01-16 12:59:59 +01:00
Hans de Goede
3b444eadf7 usb: Add usb_device_alloc/free_streams
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-26 09:21:17 +01:00
Stefan Hajnoczi
02a5c4c974 qdev: Drop misleading qdev_free() function
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent.  The device is not necessarily
freed.

The device will be freed when its QObject refcount reaches zero.  It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.

Call object_unparent(obj) directly instead of having a qdev wrapper
function.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:38 +01:00
Gerd Hoffmann
c60174e847 usb: sanity check setup_index+setup_len in post_load
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Andreas Färber
fb17dfe057 qdev: Pass size to qbus_create_inplace()
To be passed to object_initialize().

Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:35 +02:00
Andreas Färber
c889b3a55d usb: Pass size to usb_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() cast to avoid a direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Gerd Hoffmann
71938a09d2 usb: add serial bus property
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value.  Applies to emulated devices only.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24 08:41:07 +02:00
Gerd Hoffmann
3b7e759a41 usb: better speed mismatch error reporting
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint.  And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23 08:43:10 +02:00
Gerd Hoffmann
c24e4aac3b usb-hub: limit chain length
USB supports up to 5 hubs chained.
Catch attempts to chain more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-03 11:39:43 +02:00
Wenchao Xia
84f2d0ea0f HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Andreas Färber
8c43a6f05d Make all static TypeInfos const
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.

Fix the documented QOM examples:

 sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h

Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:

 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c

This also avoids to piggy-back these changes onto real functional
changes or other refactorings.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10 15:11:53 -06:00
Hans de Goede
f79738b03b usb: Add an usb_device_ep_stopped USBDevice method
Some usb devices (host or network redirection) can benefit from knowing when
the guest stops using an endpoint. Redirection may involve submitting packets
independently from the guest (in combination with a fifo buffer between the
redirection code and the guest), to ensure that buffers of the real usb device
are timely emptied. This is done for example for isoc traffic and for interrupt
input endpoints. But when the (re)submission of packets is done by the device
code, then how does it know when to stop this?

For isoc endpoints this is handled by detecting a set interface (change alt
setting) command, which works well for isoc endpoints. But for interrupt
endpoints currently the redirection code never stops receiving data from
the device, which is less then ideal.

However the controller emulation is aware when a guest looses interest, as
then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint
is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice
method and modifies the hcd code to call this on queue unlink / ep stop.

This makes it possible for the redirection code to properly stop receiving
interrupt input (*) data when the guest no longer has interest in it.

*) And in the future also buffered bulk input.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-07 12:57:24 +01:00
Paolo Bonzini
9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini
83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Hans de Goede
386ab487eb usb: Allow overriding of usb_desc at the device level
This allows devices to present a different set of descriptors based on
device properties.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-04 14:41:54 +01:00
Stefan Hajnoczi
c128d6a6d7 usb: fail usbdevice_create() when there is no USB bus
Report an error instead of segfaulting when attaching a USB device to a
machine with no USB busses:

  $ qemu-system-arm -machine vexpress-a9 \
      -sd Fedora-17-armhfp-vexpress-mmcblk0.img \
      -kernel vmlinuz-3.4.2-3.fc17.armv7hl \
      -initrd initramfs-3.4.2-3.fc17.armv7hl.img \
      -usbdevice disk:format=raw:test.img

Note that the vexpress-a9 machine does not have a USB host controller.

Reported-by: David Abdurachmanov <David.Abdurachmanov@cern.ch>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-29 08:04:13 +01:00
Hans de Goede
9a77a0f589 usb: split packet result into actual_length + status
Since with the ehci and xhci controllers a single packet can be larger
then maxpacketsize, it is possible for the result of a single packet
to be both having transferred some data as well as the transfer to have
an error.

An example would be an input transfer from a bulk endpoint successfully
receiving 1 or more maxpacketsize packets from the device, followed
by a packet signalling halt.

While already touching all the devices and controllers handle_packet /
handle_data / handle_control code, also change the return type of
these functions to void, solely storing the status in the packet. To
make the code paths for regular versus async packet handling more
uniform.

This patch unfortunately is somewhat invasive, since makeing the qemu
usb core deal with this requires changes everywhere. This patch only
prepares the usb core for this, all the hcd / device changes are done
in such a way that there are no functional changes.

This patch has been tested with uhci and ehci hcds, together with usb-audio,
usb-hid and usb-storage devices, as well as with usb-redir redirection
with a wide variety of real devices.

Note that there is usually no need to directly set packet->actual_length
form devices handle_data callback, as that is done by usb_packet_copy()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-08 18:41:46 +01:00
Hans de Goede
36dfe324fd usb: Add USB_RET_ADD_TO_QUEUE packet result code
This can be used by usb-device code which wishes to process an entire endpoint
queue at once, to do this the usb-device code returns USB_RET_ADD_TO_QUEUE
from its handle_data class method and defines a flush_ep_queue class method
to call when the hcd is done queuing up packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25 09:08:09 +02:00
Gerd Hoffmann
495d544798 usb: restore USBDevice->attached on vmload
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-20 14:46:02 +02:00
Anthony Liguori
0d936928ef qdev: Convert busses to QEMU Object Model
This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:38 +02:00
Anthony Liguori
09e5ab6360 qdev: Use wrapper for qdev_get_path
This makes it easier to remove it from BusInfo.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:38 +02:00
Paolo Bonzini
bce544740a qdev: Move bus properties to abstract superclasses
In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden.  In QOM, instead, these abstract classes are
explicit so we can move bus properties there.

All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.

We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.

The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.

This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types.  So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.

Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:37 +02:00
Paolo Bonzini
3cb75a7cba qdev: Move bus properties to a separate global
Simple code movement in order to simplify future refactoring.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:37 +02:00
Gerd Hoffmann
eeb0cf9abf usb/vmstate: add parent dev path
... to make vmstate id string truely unique with multiple host
controllers, i.e. move from "1/usb-ptr" to "0000:00:01.3/1/usb-ptr"
(usb tabled connected to piix3 uhci).

This obviously breaks migration.  To handle this the usb bus
property "full-path" is added.  When setting this to false old
behavior is maintained.  This way current qemu will be compatible
with old versions when started using '-M pc-$oldversion'.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-17 10:23:21 +02:00
Gerd Hoffmann
f1ae32a1ec usb: the big rename
Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-03-13 10:15:32 +01:00