With the introduction of the batch hinting, meaningless batches can be
created with no IOTLB updates if the memory region was skipped by
vhost_vdpa_listener_skipped_section. This is the case of host notifiers
memory regions, device un/realize, and others. This causes the vdpa
device to receive dma mapping settings with no changes, a possibly
expensive operation for nothing.
To avoid that, VHOST_IOTLB_BATCH_BEGIN hint is delayed until we have a
meaningful (not skipped section) mapping or unmapping operation, and
VHOST_IOTLB_BATCH_END is not written unless at least one of _UPDATE /
_INVALIDATE has been issued.
v3:
* Use a bool instead of a counter avoiding potential number wrapping
* Fix bad check on _commit
* Move VHOST_BACKEND_F_IOTLB_BATCH check to
vhost_vdpa_iotlb_batch_begin_once
v2 (from RFC):
* Rename misleading name
* Abstract start batching function for listener_add/del
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210812140933.226288-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_user_backend_init() can fail without setting an error. Unclean.
Its caller vhost_dev_init() compensates by substituting a generic
error then. Goes back to commit 28770ff935 "vhost: Distinguish errors
in vhost_backend_init()".
Clean up by moving the generic error from vhost_dev_init() to all the
failure paths that neglect to set an error.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-14-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
vhost_user_get_config() can fail without setting an error. Unclean.
Its caller vhost_dev_get_config() compensates by substituting a
generic error then. Goes back to commit 50de51387f "vhost:
Distinguish errors in vhost_dev_get_config()".
Clean up by moving the generic error from vhost_dev_get_config() to
all the failure paths that neglect to set an error.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-13-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Sign of error_setg_errno()'s second argument fixed in both calls]
Most callers check the return value. Some check whether it set an
error. Functionally equivalent, but the former tends to be easier on
the eyes, so do that everywhere.
Prior art: commit c6ecec43b2 "qemu-option: Check return value instead
of @err where convenient".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 9894dc0cdc "char: convert
from GIOChannel to QIOChannel", the first argument to the watch callback
can actually be a QIOChannel, which is not a GIOChannel (but a QEMU
Object).
Even though we never used that pointer, change the callback type to warn
the users. Possibly a better fix later, we may want to store the
callback and call it from intermediary functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This adds processing of VIRTIO_VSOCK_F_SEQPACKET features bit. Guest
negotiates it with vhost, thus both will know that SOCK_SEQPACKET
supported by peer.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Message-Id: <20210622144747.2949134-1-arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-i2c device as part of a PCI
bus. It is mostly boilerplate which looks pretty similar to the
vhost-user-fs-pci device.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <8a083eaa57d93feaab12acd1f94b225879212f20.1625806763.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-i2c device which connects
to the remote daemon. It is based of vhost-user-fs code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <e80591b52fea4b51631818bb92a798a3daf90399.1625806763.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
-----BEGIN PGP SIGNATURE-----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=kH+r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dev->max_queues was never initialised for backends that don't support
VHOST_USER_PROTOCOL_F_MQ, so it would use 0 as the maximum number of
queues to check against and consequently fail for any such backend.
Set it to 1 if the backend doesn't have multiqueue support.
Fixes: c90bd505a3
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210705171429.29286-1-kwolf@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We implement the RamDiscardManager interface and only require coordinated
discarding of RAM to work.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-13-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
vIOMMU support works already with RamDiscardManager as long as guests only
map populated memory. Both, populated and discarded memory is mapped
into &address_space_memory, where vfio_get_xlat_addr() will find that
memory, to create the vfio mapping.
Sane guests will never map discarded memory (e.g., unplugged memory
blocks in virtio-mem) into an IOMMU - or keep it mapped into an IOMMU while
memory is getting discarded. However, there are two cases where a malicious
guests could trigger pinning of more memory than intended.
One case is easy to handle: the guest trying to map discarded memory
into an IOMMU.
The other case is harder to handle: the guest keeping memory mapped in
the IOMMU while it is getting discarded. We would have to walk over all
mappings when discarding memory and identify if any mapping would be a
violation. Let's keep it simple for now and print a warning, indicating
that setting RLIMIT_MEMLOCK can mitigate such attacks.
We have to take care of incoming migration: at the point the
IOMMUs get restored and start creating mappings in vfio, RamDiscardManager
implementations might not be back up and running yet: let's add runstate
priorities to enforce the order when restoring.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's properly notify when (un)plugging blocks, after discarding memory
and before allowing the guest to consume memory. Handle errors from
notifiers gracefully (e.g., no remaining VFIO mappings) when plugging,
rolling back the change and telling the guest that the VM is busy.
One special case to take care of is replaying all notifications after
restoring the vmstate. The device starts out with all memory discarded,
so after loading the vmstate, we have to notify about all plugged
blocks.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-6-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Any errors are unexpected and ram_block_discard_range() already properly
prints errors. Let's stop manually reporting errors.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's factor out the core logic, no need to replicate.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-4-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
At some point, after unplugging virtio-pci the virtio device may be unrealised,
but the memory regions may be present in flatview. So, it's a possible situation
when memory region's callbacks are called for "unplugged" device.
Previous two patches made sure this case does not cause QEMU to crash.
This patch adds check for "notify" memory region. Now reads will return "-1" if a virtio
device is not present on a virtio bus.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1938042
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1743098
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20210609095843.141378-4-andrew@daynix.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now, if virtio device is not present on virtio-bus - pci config callbacks
will not lead to possible crush. The read will return "-1" which should be
interpreted by a driver that pci device may be unplugged.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20210609095843.141378-3-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During unplug the virtio device is unplugged from virtio-bus on pci. In some cases,
requests to virtio-pci mm may acquire during/after unplug. Added check that virtio
device is on the bus, for "common" memory region.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20210609095843.141378-2-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device model batching its ioeventfds in a single MR transaction is
an optimization. Clarify this in virtio-scsi, virtio-blk and generic
virtio code. Also clarify that the transaction must commit before
closing ioeventfds so that no one is tempted to merge the loops
in the start functions error path and in the stop functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <162125799728.1394228.339855768563326832.stgit@bahia.lan>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio devices support separate iothreads waiting for
events from file descriptors. These are asynchronous
events that can't be recorded and replayed, therefore
this patch disables ioeventfd for all devices when
record or replay is enabled.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <162125678869.1252810.4317416444097392406.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, switch to 0/-errno so that different kinds of
errors can be distinguished in the caller.
This involves changing a few more callbacks in VhostOps to return
0/-errno: .vhost_set_owner(), .vhost_get_features() and
.vhost_virtqueue_set_busyloop_timeout(). The implementations of these
functions are trivial as they generally just send a message to the
backend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-4-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-3-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We used to initialize backend_features during vhost_vdpa_init()
regardless whether or not it was supported by vhost. This will lead
the unsupported features like VIRTIO_F_IN_ORDER to be included and set
to the vhost-vdpa during vhost_dev_start. Because the
VIRTIO_F_IN_ORDER is not supported by vhost-vdpa so it won't be
advertised to guest which will break the datapath.
Fix this by not initializing the backend_features, so the
acked_features could be built only from guest features via
vhost_net_ack_features().
Fixes: 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: qemu-stable@nongnu.org
Cc: Gautam Dawar <gdawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch implements the vq notification mapping support for
vhost-vDPA. This is simply done by using mmap()/munmap() for the
vhost-vDPA fd during device start/stop. For the device without
notification mapping support, we fall back to eventfd based
notification gracefully.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vDPA is not tie to any specific hardware, for safety and simplicity,
vhost-vDPA doesn't allow MMIO area to be mapped via IOTLB. Only the
doorbell could be mapped via mmap(). So this patch exclude skip the
ram device from the IOTLB mapping.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The symbol address_space_memory are already declared in
include/exec/address-spaces.h. So let's add this header file
and remove the redundant declaration in include/hw/virtio/vhost-vdpa.h.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517123246.999-1-xieyongji@bytedance.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce the cpu_virtio_is_big_endian() generic helper to avoid
calling CPUClass internal virtio_is_big_endian() one.
Similarly to commit bf7663c4bd ("cpu: introduce
CPUClass::virtio_is_big_endian()"), we keep 'virtio' in the method
name to hint this handler shouldn't be called anywhere but from the
virtio code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-8-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Creating a device with a number of queues that isn't supported by the
backend is pointless, the device won't work properly and the error
messages are rather confusing.
Just fail to create the device if num-queues is higher than what the
backend supports.
Since the relationship between num-queues and the number of virtqueues
depends on the specific device, this is an additional value that needs
to be initialised by the device. For convenience, allow leaving it 0 if
the check should be skipped. This makes sense for vhost-user-net where
separate vhost devices are used for the queues and custom initialisation
code is needed to perform the check.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935031
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-7-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 2943b53f6 (' virtio: force VIRTIO_F_IOMMU_PLATFORM') made sure
that vhost can't just reject VIRTIO_F_IOMMU_PLATFORM when it was
requested. However, just adding it back to the negotiated flags isn't
right either because it promises support to the guest that the device
actually doesn't support. One example of a vhost-user device that
doesn't have support for the flag is the vhost-user-blk export of QEMU.
Instead of successfully creating a device that doesn't work, just fail
to plug the device when it doesn't support the feature, but it was
requested. This results in much clearer error messages.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935019
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-6-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
As it's only used inside hw/virtio/vhost-vdpa.c.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20210413133737.1574-1-yuzenghui@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds ioeventfd flag for virtio-mmio configuration.
It allows switching ioeventfd on and off.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700379211.1135943.8859209566937991305.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VirtIOFeature structure isn't modified, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511104157.2880306-2-philmd@redhat.com>
The bulk stage is kind of weird: migration_bitmap_find_dirty() will
indicate a dirty page, however, ram_save_host_page() will never save it, as
migration_bitmap_clear_dirty() detects that it is not dirty.
We already fill the bitmap in ram_list_init_bitmaps() with ones, marking
everything dirty - it didn't used to be that way, which is why we needed
an explicit first bulk stage.
Let's simplify: make the bitmap the single source of thuth. Explicitly
handle the "xbzrle_enabled after first round" case.
Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right
now), there is now a slight change in behavior:
- Colo: When starting, it will be disabled (was implicitly enabled)
until the first round actually finishes.
- Free page hinting: When starting, XBZRLE will be disabled (was implicitly
enabled) until the first round actually finished.
- Snapshots: When starting, XBZRLE will be disabled. We essentially only
do a single run, so I guess it will never actually get disabled.
Postcopy seems to indirectly disable it in ram_save_page(), so there
shouldn't be really any change.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210216105039.40680-1-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make virtio-fs take into account server capabilities.
Just returning requested features assumes they all of then are implemented
by server and results in setting unsupported configuration if some of them
are absent.
Signed-off-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With changes suggested by Stefan
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The same thing as for incoming postcopy - we cannot deal with concurrent
RAM discards when using background snapshot feature in outgoing migration.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 4c70875372 ("pci: advertise a page aligned ATS") advertises
the page aligned via ATS capability (RO) to unbrek recent Linux IOMMU
drivers since 5.2. But it forgot the compat the capability which
breaks the migration from old machine type:
(qemu) qemu-kvm: get_pci_config_device: Bad config data: i=0x104 read:
0 device: 20 cmask: ff wmask: 0 w1cmask:0
This patch introduces a new parameter "x-ats-page-aligned" for
virtio-pci device and turns it on for machine type which is newer than
5.1.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: 4c70875372 ("pci: advertise a page aligned ATS")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210406040330.11306-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The value is assigned later in this procedure.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1743098
This commit completes the solution of segfault in hot unplug flow
(by commit ccec7e9603).
Added missing check for vdev in virtio_pci_isr_read.
Typical stack of crash:
virtio_pci_isr_read ../hw/virtio/virtio-pci.c:1365 with proxy-vdev = 0
memory_region_read_accessor at ../softmmu/memory.c:442
access_with_adjusted_size at ../softmmu/memory.c:552
memory_region_dispatch_read1 at ../softmmu/memory.c:1420
memory_region_dispatch_read at ../softmmu/memory.c:1449
flatview_read_continue at ../softmmu/physmem.c:2822
flatview_read at ../softmmu/physmem.c:2862
address_space_read_full at ../softmmu/physmem.c:2875
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-2-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ret in virtio_pmem_resp is a uint32_t variable, which should be assigned
using virtio_stl_p.
The kernel side driver does not guarantee virtio_pmem_resp to be initialized
to zero in advance, So sometimes the flush operation will fail.
Signed-off-by: Wang Liang <wangliangzz@inspur.com>
Message-Id: <20210317024145.271212-1-wangliangzz@126.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that everything is in place, have the nested event loop to monitor
the slave channel. The source in the main event loop is destroyed and
recreated to ensure any pending even for the slave channel that was
previously detected is purged. This guarantees that the main loop
wont invoke slave_read() based on an event that was already handled
by the nested loop.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-7-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A deadlock condition potentially exists if a vhost-user process needs
to request something to QEMU on the slave channel while processing a
vhost-user message.
This doesn't seem to affect any vhost-user implementation so far, but
this is currently biting the upcoming enablement of DAX with virtio-fs.
The issue is being observed when the guest does an emergency reboot while
a mapping still exits in the DAX window, which is very easy to get with
a busy enough workload (e.g. as simulated by blogbench [1]) :
- QEMU sends VHOST_USER_GET_VRING_BASE to virtiofsd.
- In order to complete the request, virtiofsd then asks QEMU to remove
the mapping on the slave channel.
All these dialogs are synchronous, hence the deadlock.
As pointed out by Stefan Hajnoczi:
When QEMU's vhost-user master implementation sends a vhost-user protocol
message, vhost_user_read() does a "blocking" read during which slave_fd
is not monitored by QEMU.
The natural solution for this issue is an event loop. The main event
loop cannot be nested though since we have no guarantees that its
fd handlers are prepared for re-entrancy.
Introduce a new event loop that only monitors the chardev I/O for now
in vhost_user_read() and push the actual reading to a one-shot handler.
A subsequent patch will teach the loop to monitor and process messages
from the slave channel as well.
[1] https://github.com/jedisct1/Blogbench
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-6-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The slave channel is implemented with socketpair() : QEMU creates
the pair, passes one of the socket to virtiofsd and monitors the
other one with the main event loop using qemu_set_fd_handler().
In order to fix a potential deadlock between QEMU and a vhost-user
external process (e.g. virtiofsd with DAX), we want to be able to
monitor and service the slave channel while handling vhost-user
requests.
Prepare ground for this by converting the slave channel to be a
QIOChannelSocket. This will make monitoring of the slave channel
as simple as calling qio_channel_add_watch_source(). Since the
connection is already established between the two sockets, only
incoming I/O (G_IO_IN) and disconnect (G_IO_HUP) need to be
serviced.
This also allows to get rid of the ancillary data parsing since
QIOChannelSocket can do this for us. Note that the MSG_CTRUNC
check is dropped on the way because QIOChannelSocket ignores this
case. This isn't a problem since slave_read() provisions space for
8 file descriptors, but affected vhost-user slave protocol messages
generally only convey one. If for some reason a buggy implementation
passes more file descriptors, no need to break the connection, just
like we don't break it if some other type of ancillary data is
received : this isn't explicitely violating the protocol per-se so
it seems better to ignore it.
The current code errors out on short reads and writes. Use the
qio_channel_*_all() variants to address this on the way.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-5-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>