The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement an initial minimal set of EL0-visible system registers:
* NZCV
* FPCR
* FPSR
* CTR_EL0
* DCZID_EL0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The AArch64 equivalent of the traditional AArch32
cp15 coprocessor registers is the set of instructions
MRS/MSR/SYS/SYSL, which cover between them both true
system registers and the "operations with side effects"
such as cache maintenance which in AArch32 are mixed
in with other cp15 registers. Implement these instructions
to look in the cpregs hashtable for the register or
operation.
Since we don't yet populate the cpregs hashtable with
any registers with the "AA64" bit set, everything will
still UNDEF at this point.
MSR/MRS is the first user of is_jmp = DISAS_UPDATE, so
fix an infelicity in its handling where the main loop
was requiring the caller to do the update of PC rather
than just doing it itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Update the generic cpreg support code to also handle AArch64:
AArch64-visible registers coexist in the same hash table with
AArch32-visible ones, with a bit in the hash key distinguishing
them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
define_one_arm_cp_reg_with_opaque() has a set of nested loops which
insert a cpreg entry into the hashtable for each of the possible
opc/crn/crm values allowed by wildcard specifications. We're about
to add an extra loop to this nesting, so pull the core of the loop
(which adds a single entry to the hashtable) out into its own
function for clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement FMOV, ie non-converting moves between general purpose
registers and floating point registers. This is a subtype of
the floating point <-> integer instruction class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a top level decoder skeleton for FP instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decoding for the exception generating instructions, and implement
SVC (syscalls) and BRK (software breakpoint).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Data-processing (3 source)"
family of instructions, namely MADD, MSUB, SMADDL, SMSUBL, SMULH,
UMADDL, UMSUBL, UMULH.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the mov wide instructions
(MOVN, MOVZ, MOVK).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the non-carry forms of addition and subtraction
(immediate, extended register and shifted register).
This includes the code to calculate NZCV if the instruction
calls for setting the flags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the pre/post-index ld/st forms with immediate
offsets as well as the un-scaled immediate form (which are all
variations on the same 9-bit immediate instruction form).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the load/store forms using a register offset.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the forms of ld/st with a 12 bit
unsigned immediate offset.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch support the basic load and store pair instructions and
includes the generic helper functions:
* do_gpr_st()
* do_fp_st()
* do_gpr_ld()
* do_fp_ld()
* read_cpu_reg_sp()
* gen_check_sp_alignment()
The last function gen_check_sp_alignment() is a NULL op currently but
put in place to make it easy to add SP alignment checking later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The recent VSX patches broken compilation of QEMU when configurated
with --enable-debug, as it was treating "target long" TCG variables
as "i64" which is not true for 32bit targets.
This patch fixes all the places that the compiler has found to use
the correct variable type and if necessary manually cast.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This covers mostly minor bug fixes and implements the SIGP START
hypercall which allows to start a remote CPU without changing its
state.
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Thomas Huth (7):
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Implemented SIGP START
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/ioinst: CHSC has to set a condition code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)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=0Gfl
-----END PGP SIGNATURE-----
Merge tag 'signed-s390-for-upstream' of git://github.com/agraf/qemu
Patch queue for s390 - 2013-12-18
This covers mostly minor bug fixes and implements the SIGP START
hypercall which allows to start a remote CPU without changing its
state.
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Thomas Huth (7):
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Implemented SIGP START
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/ioinst: CHSC has to set a condition code
* tag 'signed-s390-for-upstream' of git://github.com/agraf/qemu:
s390x/ioinst: CHSC has to set a condition code
s390x/kvm: Fixed condition code for unknown SIGP orders
s390x/kvm: Simplified the calculation of the SIGP order code
s390x/kvm: Implemented SIGP START
s390x/kvm: Fix coding style in handle_sigp()
s390x/kvm: Removed s390_store_status stub
s390x/kvm: Removed duplicated SIGP defines
s390x/kvm: Fix diagnose handling.
The comments apply to 8-bit stores, not 8-byte stores.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf (3):
PPC: Use default pci bus name for grackle and heathrow
roms: Flush icache when writing roms to guest memory
PPC: Add VSX to hflags
Alexey Kardashevskiy (5):
powerpc: add PVR mask support
target-ppc: move POWER7+ to a separate family
spapr-rtas: replace return code constants with macros
spapr-rtas: add ibm, (get|set)-system-parameter
spapr: make sure RMA is in first mode of first memory node
Greg Kurz (1):
target-ppc: add stubs for KVM breakpoints
Paolo Bonzini (1):
spapr: tie spapr-nvram to -pflash
Paul Mackerras (1):
spapr: limit numa memory regions by ram size
Peter Crosthwaite (2):
device_tree: s/qemu_devtree/qemu_fdt globally
device_tree: qemu_fdt_setprop: Rename val_array arg
Tom Musta (19):
Declare and Enable VSX
Add MSR VSX and Associated Exception
Add VSX Instruction Decoders
Add VSR to Global Registers
Add lxvd2x
Add stxvd2x
Add xxpermdi
Add lxsdx
Add lxvdsx
Add lxvw4x
Add stxsdx
Add stxvw4x
Add VSX Scalar Move Instructions
Add VSX Vector Move Instructions
Add Power7 VSX Logical Instructions
Add xxmrgh/xxmrgl
Add xxsel
Add xxspltw
Add xxsldwi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=70tP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2013-12-20
Alexander Graf (3):
PPC: Use default pci bus name for grackle and heathrow
roms: Flush icache when writing roms to guest memory
PPC: Add VSX to hflags
Alexey Kardashevskiy (5):
powerpc: add PVR mask support
target-ppc: move POWER7+ to a separate family
spapr-rtas: replace return code constants with macros
spapr-rtas: add ibm, (get|set)-system-parameter
spapr: make sure RMA is in first mode of first memory node
Greg Kurz (1):
target-ppc: add stubs for KVM breakpoints
Paolo Bonzini (1):
spapr: tie spapr-nvram to -pflash
Paul Mackerras (1):
spapr: limit numa memory regions by ram size
Peter Crosthwaite (2):
device_tree: s/qemu_devtree/qemu_fdt globally
device_tree: qemu_fdt_setprop: Rename val_array arg
Tom Musta (19):
Declare and Enable VSX
Add MSR VSX and Associated Exception
Add VSX Instruction Decoders
Add VSR to Global Registers
Add lxvd2x
Add stxvd2x
Add xxpermdi
Add lxsdx
Add lxvdsx
Add lxvw4x
Add stxsdx
Add stxvw4x
Add VSX Scalar Move Instructions
Add VSX Vector Move Instructions
Add Power7 VSX Logical Instructions
Add xxmrgh/xxmrgl
Add xxsel
Add xxspltw
Add xxsldwi
* agraf/tags/signed-ppc-for-upstream: (32 commits)
spapr: limit numa memory regions by ram size
spapr: make sure RMA is in first mode of first memory node
device_tree: qemu_fdt_setprop: Rename val_array arg
device_tree: s/qemu_devtree/qemu_fdt globally
PPC: Add VSX to hflags
Add xxsldwi
Add xxspltw
Add xxsel
Add xxmrgh/xxmrgl
Add Power7 VSX Logical Instructions
Add VSX Vector Move Instructions
Add VSX Scalar Move Instructions
roms: Flush icache when writing roms to guest memory
spapr: tie spapr-nvram to -pflash
PPC: Use default pci bus name for grackle and heathrow
spapr-rtas: add ibm, (get|set)-system-parameter
spapr-rtas: replace return code constants with macros
target-ppc: move POWER7+ to a separate family
Add stxvw4x
Add stxsdx
...
This makes sure that all NUMA memory blocks reside within RAM or
have zero length.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The SPAPR specification says that the RMA starts at the LPAR's logical
address 0 and is the first logical memory block reported in
the LPAR’s device tree.
So SLOF only maps the first block and that block needs to span
the full RMA.
This makes sure that the RMA area is where SLOF expects it.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Looking at the implementation, this doesn't really have a lot to do
with arrays. Its just a pointer to a buffer and is passed through
to the wrapped fn (qemu_fdt_setprop) unchanged. So rename to make it
consistent with libfdt, which in the wrapped function just calls it
"val".
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The qemu_devtree API is a wrapper around the fdt_ set of APIs.
Rename accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[agraf: also convert hw/arm/virt.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
We generate different code depending on whether MSR_VSX is set or
clear, so it needs to be part of our hflags too which indicate whether
we're still in the same translation block cache bucket.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Shift Left Double by Word Immediate
(xxsldwi) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Splat Word (xxsplatw) instruction.
This is the first instruction to use the UIM immediate field
and consequently a decoder is also added.
V2: reworked implementation per Richard Henderson's comments.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Select (xxsel) instruction.
The xxsel instruction has four VSR operands. Thus the xC
instruction decoder is added.
The xxsel instruction is massively overloaded in the opcode
table since only bits 26 and 27 are opcode bits. This
overloading is done in matrix fashion with two macros
(GEN_XXSEL_ROW and GEN_XX_SEL).
V2: (1) eliminated unecessary XXSEL macro (2) tighter implementation
using tcg_gen_andc_i64.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Merge High Word and VSX Merge Low Word
instructions.
V2: Now implemented using deposit (per Richard Henderson's comment)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX logical instructions that are defined
by the Version 2.06 Power ISA (aka Power7):
- xxland
- xxlandc
- xxlor
- xxlxor
- xxlnor
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar move instructions:
- xsabsdp (Scalar Absolute Value Double-Precision)
- xsnabspd (Scalar Negative Absolute Value Double-Precision)
- xsnegdp (Scalar Negate Double-Precision)
- xscpsgndp (Scalar Copy Sign Double-Precision)
A common generator macro (VSX_SCALAR_MOVE) is added since these
instructions vary only slightly from each other.
Macros to support VSX XX2 and XX3 form opcodes are also added.
These macros handle the overloading of "opcode 2" space (instruction
bits 26:30) caused by AX and BX bits (29 and 30, respectively).
V3: Per feedback from Paolo Bonzini, moved the sign mask into a
temporary and used andc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr-nvram's drive property is currently connected to a non-existent
"-machine nvram=<drivename>" option. Instead, tie it to -pflash like
other non-volatile RAM devices. This provides the following possibilities
for adding a backend for the sPAPR non-volatile RAM:
* -pflash filename
* -drive if=pflash,file=filename,format=raw,...
* -drive if=none,file=filename,format=raw,id=foo,... -global spapr-nvram.drive=foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There's no good reason to call our bus "pci" rather than let the default
bus name take over ("pci.0").
The big downside to calling it different from anyone else is that tools
that pass -device get confused. They are looking for a bus "pci.0" rather
than "pci".
To make life easier for everyone, let's just drop the name override.
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds very basic handlers for ibm,get-system-parameter and
ibm,set-system-parameter RTAS calls.
The only parameter handled at the moment is
"platform-processor-diagnostics-run-mode" which is always disabled and
does not support changing. This is expected to make
"ppc64_cpu --run-mode=1" happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: s/papameter/parameter/g]
Signed-off-by: Alexander Graf <agraf@suse.de>
So far POWER7+ was a part of POWER7 family. However it has a different
PVR base value so in order to support PVR masks, it needs a separate
family class.
This adds a new family class, PVR base and mask values and moves
Power7+ v2.1 CPU to a new family. The class init function is copied
from the POWER7 family.
This defines a firmware name for the new family as "PowerPC,POWER7+"
instead of previously used "PowerPC,POWER7" from the POWER7 family.
The reason for that is that the Sapphire firmware (a h0st firmware)
uses "PowerPC,POWER7+" already and since no specification defines
exactly the CPU nodes naming in the device tree, we better stay
in sync with the host firmware.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Vector Word*4 Indexed (stxvw4x)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Scalar Doubleword Indexed (stxsdx)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Word*4 Indexed (lxvw4x)
instruction.
V2: changed to use deposit_i64 per Richard Henderson's review.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Doubleword & Splat Indexed
(lxvdsx) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Scalar Doubleowrd Indexed (lxsdx)
instruction.
The lower 8 bytes of the target register are undefined; this
implementation leaves those bytes unaltered.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the xxpermdi instruction. The instruction
uses bits 22, 23, 29 and 30 for non-opcode fields (DM, AX
and BX). This results in overloading of the opcode table
with aliases, which can be seen in the GEN_XX3FORM_DM
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the stxvd2x instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the lxvd2x instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds VSX VSRs to the the list of global register indices.
More specifically, it adds the lower halves of the first 32 VSRs to
the list of global register indices. The upper halves of the first
32 VSRs are already defined via cpu_fpr[]. And the second 32 VSRs
are already defined via the cpu_avrh[] and cpu_avrl[] arrays.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds decoders for the VSX fields XT, XS, XA, XB and
DM. The first four are split fields and a general helper for
these types of fields is also added.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
