For now just a pointer to the source file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
The virtio-scsi fuzz target sets up and fuzzes the available virtio-scsi
queues. After an element is placed on a queue, the fuzzer can select
whether to perform a kick, or continue adding elements.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-22-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-net fuzz target feeds inputs to all three virtio-net
virtqueues, and uses forking to avoid leaking state between fuzz runs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-21-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These three targets should simply fuzz reads/writes to a couple ioports,
but they mostly serve as examples of different ways to write targets.
They demonstrate using qtest and qos for fuzzing, as well as using
rebooting and forking to reset state, or not resetting it at all.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-20-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-17-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fork() is a simple way to ensure that state does not leak in between
fuzzing runs. Unfortunately, the fuzzer mutation engine relies on
bitmaps which contain coverage information for each fuzzing run, and
these bitmaps should be copied from the child to the parent(where the
mutation occurs). These bitmaps are created through compile-time
instrumentation and they are not shared with fork()-ed processes, by
default. To address this, we create a shared memory region, adjust its
size and map it _over_ the counter region. Furthermore, libfuzzer
doesn't generally expose the globals that specify the location of the
counters/coverage bitmap. As a workaround, we rely on a custom linker
script which forces all of the bitmaps we care about to be placed in a
contiguous region, which is easy to locate and mmap over.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-16-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/fuzz/fuzz.c serves as the entry point for the virtual-device
fuzzer. Namely, libfuzzer invokes the LLVMFuzzerInitialize and
LLVMFuzzerTestOneInput functions, both of which are defined in this
file. This change adds a "FuzzTarget" struct, along with the
fuzz_add_target function, which should be used to define new fuzz
targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-13-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved functions are not specific to qos-test and might be useful
elsewhere. For example the virtual-device fuzzer makes use of them for
qos-assisted fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-12-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most qos-related objects were specified in the qos-test-obj-y variable.
qos-test-obj-y also included qos-test.o which defines a main().
This made it difficult to repurpose qos-test-obj-y to link anything
beside tests/qos-test against libqos. This change separates objects that
are libqos-specific and ones that are qos-test specific into different
variables.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200220041118.23264-11-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The names i2c_send and i2c_recv collide with functions defined in
hw/i2c/core.c. This causes an error when linking against libqos and
softmmu simultaneously (for example when using qtest inproc). Rename the
libqos functions to avoid this.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200220041118.23264-10-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using qtest "in-process" communication, qtest_sendf directly calls
a function in the server (qtest.c). Previously, bufwrite used
socket_send, which bypasses the TransportOps enabling the call into
qtest.c. This change replaces the socket_send calls with ops->send,
maintaining the benefits of the direct socket_send call, while adding
support for in-process qtest calls.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-8-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes it simple to swap the transport functions for qtest commands
to and from the qtest client. For example, now it is possible to
directly pass qtest commands to a server handler that exists within the
same process, without the standard way of writing to a file descriptor.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-7-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The ctx->first_bh list contains all created BHs, including those that
are not scheduled. The list is iterated by the event loop and therefore
has O(n) time complexity with respected to the number of created BHs.
Rewrite BHs so that only scheduled or deleted BHs are enqueued.
Only BHs that actually require action will be iterated.
One semantic change is required: qemu_bh_delete() enqueues the BH and
therefore invokes aio_notify(). The
tests/test-aio.c:test_source_bh_delete_from_cb() test case assumed that
g_main_context_iteration(NULL, false) returns false after
qemu_bh_delete() but it now returns true for one iteration. Fix up the
test case.
This patch makes aio_compute_timeout() and aio_bh_poll() drop from a CPU
profile reported by perf-top(1). Previously they combined to 9% CPU
utilization when AioContext polling is commented out and the guest has 2
virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200221093951.1414693-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QSLIST is the only family of lists for which we do not have RCU-friendly accessors,
add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200220103828.24525-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl5Ork4SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9A7XYH/RFs+kxf+v9V1qE1rwdbJCXdA36/JIoF
AW6CtPk47vEodvssjgPBygs/GBqQDdkpZKyA42ZxrE3dPeyRCusncYKRRFPbP4Oq
pXj/ZYy9YBn0LIqK41kmXgMdm9HZ113WcG5/rNuh5DOtwX7e688tmHXOHbT8MKAR
q/nBK1AVNVxFyBRnRow/YK1jGXmA5rIoONVd6Spkj/5xmKZJ6RtpQb1+WnD7HI3j
TVvDcEnKGCT/qZ73rJ6UFRIUdllAQ7fJAOLnXYFwcwkErq3fMEwLpq3syuiuks+B
KoFlUzCsM3xiASGnz5MgZI7EVhjGzruneVoBrSyhjlRqNaOB2pYeBwQ=
=4/ZP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-02-20' into staging
Block patches:
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
block layer function
# gpg: Signature made Thu 20 Feb 2020 16:05:34 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-02-20:
iotests: Test snapshot -l field separation
block: Fix VM size field width in snapshot dump
iotests: Test convert -n -B to backing-less target
qemu-img: Fix convert -n -B for backing-less targets
iotests: Add test for image creation fallback
iscsi: Drop iscsi_co_create_opts()
file-posix: Drop hdev_co_create_opts()
block: Generic file creation fallback
block/nbd: Fix hang in .bdrv_close()
iotests/279: Fix for non-qcow2 formats
block/backup-top: fix flags handling
block: always fill entire LUKS header space with zeros
qemu-img: Add --target-is-zero to convert
qapi: Allow getting flat output from 'query-named-block-nodes'
iotests/147: Fix drive parameters
iotests: Remove the superfluous 2nd check for the availability of quorum
docs: qcow2: introduce compression type feature
docs: improve qcow2 spec about extending image header
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test that all fields in "qemu-img snapshot -l"s output are
separated by spaces.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Renamed test from 284 to 286]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This must not crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-3-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Added a note that NBD does not support resizing, which is why
the second case is expected to fail]
Signed-off-by: Max Reitz <mreitz@redhat.com>
First, driver=qcow2 will not work so well with non-qcow2 formats (and
this test claims to support qcow, qed, and vmdk).
Second, vmdk will always report the backing file format to be vmdk.
Filter that out so the output looks like for all other formats.
Third, the flat vmdk subformats do not support backing files, so they
will not work with this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191219144243.1763246-1-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When initializing the LUKS header the size with default encryption
parameters will currently be 2068480 bytes. This is rounded up to
a multiple of the cluster size, 2081792, with 64k sectors. If the
end of the header is not the same as the end of the cluster we fill
the extra space with zeros. This was forgetting that not even the
space allocated for the header will be fully initialized, as we
only write key material for the first key slot. The space left
for the other 7 slots is never written to.
An optimization to the ref count checking code:
commit a5fff8d4b4 (refs/bisect/bad)
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Wed Feb 27 16:14:30 2019 +0300
qcow2-refcount: avoid eating RAM
made the assumption that every cluster which was allocated would
have at least some data written to it. This was violated by way
the LUKS header is only partially written, with much space simply
reserved for future use.
Depending on the cluster size this problem was masked by the
logic which wrote zeros between the end of the LUKS header and
the end of the cluster.
$ qemu-img create --object secret,id=cluster_encrypt0,data=123456 \
-f qcow2 -o cluster_size=2k,encrypt.iter-time=1,\
encrypt.format=luks,encrypt.key-secret=cluster_encrypt0 \
cluster_size_check.qcow2 100M
Formatting 'cluster_size_check.qcow2', fmt=qcow2 size=104857600
encrypt.format=luks encrypt.key-secret=cluster_encrypt0
encrypt.iter-time=1 cluster_size=2048 lazy_refcounts=off refcount_bits=16
$ qemu-img check --object secret,id=cluster_encrypt0,data=redhat \
'json:{"driver": "qcow2", "encrypt.format": "luks", \
"encrypt.key-secret": "cluster_encrypt0", \
"file.driver": "file", "file.filename": "cluster_size_check.qcow2"}'
ERROR: counting reference for region exceeding the end of the file by one cluster or more: offset 0x2000 size 0x1f9000
Leaked cluster 4 refcount=1 reference=0
...snip...
Leaked cluster 130 refcount=1 reference=0
1 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
127 leaked clusters were found on the image.
This means waste of disk space, but no harm to data.
Image end offset: 268288
The problem only exists when the disk image is entirely empty. Writing
data to the disk image payload will solve the problem by causing the
end of the file to be extended further.
The change fixes it by ensuring that the entire allocated LUKS header
region is fully initialized with zeros. The qemu-img check will still
fail for any pre-existing disk images created prior to this change,
unless at least 1 byte of the payload is written to.
Fully writing zeros to the entire LUKS header is a good idea regardless
as it ensures that space has been allocated on the host filesystem (or
whatever block storage backend is used).
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200207135520.2669430-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
8dff69b94 added an aio parameter to the drive parameter but forgot to
add a comma before, thus breaking the test. Fix it again.
Fixes: 8dff69b941
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200206130812.612960-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d9df28e7b0 ("iotests: check whitelisted formats") added the
modern @iotests.skip_if_unsupported() to the functions in this test,
so we don't need the old explicit test here anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129141751.32652-1-thuth@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Considering that legacy "mem" option is deprecated, use memdev
in tests and add an additional test for legacy "mem" option
on old machine type, to make sure it won't regress in the future.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-80-imammedo@redhat.com>
Use GString to pass argument to make_cli() so that it would be easy
to dynamically change test case arguments from main(). The follow up
patch will use it to change RAM size options depending on target.
While at it cleanup 'cli' freeing, using g_autofree annotation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-79-imammedo@redhat.com>
Fixes: fc281c8020
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two tests to see that you cannot replace a Quorum child with the
mirror job while the child is in use by a different parent.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
041's TestRepairQuorum has its own image_len, no need to refer to
TestSingleDrive. (This patch allows commenting out TestSingleDrive to
speed up 041 during test testing.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-18-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-17-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All tearDowns in 041 shutdown the VM. Thus, test cases do not need to
do it themselves (unless they need the VM to be down for some
post-operation check).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This way, we get to see errors during the completion phase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using -drive with default options means that a virtio-blk drive will be
created that has write access to the to-be quorum children. Quorum
should have exclusive write access to them, so we should use -blockdev
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests both read failure (from the top node) and write failure (to
the base node) for on-error=report/stop/ignore.
As block-commit actually starts two different types of block jobs
(mirror.c for committing the active later, commit.c for intermediate
layers), all tests are run for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for 'qemu-img convert' with copy offloading where the
target image has an external data file. If the test hosts supports it,
it tests both the case where copy offloading is supported and the case
where it isn't (otherwise we just test unsupported twice).
More specifically, the case with unsupported copy offloading tests
qcow2_alloc_cluster_abort() with external data files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
-----BEGIN PGP SIGNATURE-----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=Mspo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200213' into staging
target-arm queue:
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
# gpg: Signature made Thu 13 Feb 2020 14:40:34 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to change ARM virt ACPI DSDT table, which will cause make
check to fail, so temporarily add related golden masters to ignore
list.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fixes for the ucode revision patch from the previous pull request
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRBoQAAoJEL/70l94x66DYOUIAJKM5PDAhOkJpSqoSz2mMVJN
IOq2YhmbQHSVojUDCUEFnKd2Zja858vsOoAslgce0nbgj+ZNn9WZEVIKeHqkW6cg
gWybMy1deT5o0U05e6/EIL0id8N5FVMLdUZRdGCFk4qtILFa1kRYJmlwNOMxSVkB
MSwOy60//+po6lW0WSKD2aTf9qVvZJOQjZozqFrGlIPG/SnqrPZCMRxR/XIrrJuF
GZZyiAsRXFU1mabr7HafdUj+MYf0DWSvATmihz4wsI/LlXx712uVm9eZ48Rc6PyF
wEKh17/2bVPoL1g9OeTKYnX9aKt/7C0D98n3W0foG3IpzZzPLX4NaNKPihb5n7I=
=VlyM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* various small fixes and cleanups
* fixes for the ucode revision patch from the previous pull request
# gpg: Signature made Wed 12 Feb 2020 15:30:24 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target/i386: enable monitor and ucode revision with -cpu max
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
target/i386: fix TCG UCODE_REV access
build: move TARGET_GPROF to config-host.mak
exec: do not define use_icount for user-mode emulation
minikconf: accept alnum identifiers
Remove support for CLOCK_MONOTONIC not being defined
seqlock: fix seqlock_write_unlock_impl function
vl: Don't mismatch g_strsplit()/g_free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
spotted by asan, 'check-qtest-aarch64' runs fail if sanitizers is enabled.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There's an assert in autoconverge that checks that we quit the
iteration when we go below the expected threshold. Philippe
saw a case where this assert fired with the measured value
slightly over the threshold. (about 3k out of a few million).
I can think of two reasons:
a) Rounding errors
b) That after we make the decision to quit iteration we do one
more sync and that sees a few more dirty pages.
So add 1% slack to the assertion, that should cover a and
most cases of b, probably all we'll see for the test.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
-----BEGIN PGP SIGNATURE-----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=oMrh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging
9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The first readdir test simply checks the amount of directory
entries returned by 9pfs server, according to the created amount
of virtual files on 9pfs synth driver side. Then the subsequent
readdir test also checks whether all directory entries have the
expected file names (as created on 9pfs synth driver side),
ignoring their precise order in result list though.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <e0b4402722a877178f8fb6a8ad7b64bb20150613.1579567020.git.qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
The 9p protocol sends strings in general without null termination
over the wire. However for future use of this functions it is
beneficial for the delivered string to be null terminated though
for being able to use the string with standard C functions which
often rely on strings being null terminated.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <52c84e2ce3bcafc2a38eed13b8c8e23bc1a8ecb9.1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Scripts that have a Python shebang are meant to be executed directly from the
shell; give them 755 permissions.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204160237.16889-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
All the iotests Python scripts have been converted to search for
the Python 3 interpreter. Update the ./check script accordingly.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-13-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-11-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
As we want to enforce a unique and explicit Python 3 interpreter,
we need let this script handle 'python3' too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-28-philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
By using an Avocado tag, we can run all tests described by that
tag as once:
$ avocado --show=app run -t migration tests/acceptance/
JOB ID : 165477737509503fcfa6d7108057a0a18f2a6559
JOB LOG : avocado/job-results/job-2020-02-04T17.29-1654777/job.log
(1/3) tests/acceptance/migration.py:Migration.test_migration_with_tcp_localhost: PASS (0.38 s)
(2/3) tests/acceptance/migration.py:Migration.test_migration_with_unix: PASS (0.33 s)
(3/3) tests/acceptance/migration.py:Migration.test_migration_with_exec: PASS (0.07 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200204163304.14616-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Along with VM migration via TCP, we can use migration through
the EXEC transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Along with VM migration via TCP, we can use migration through
the UNIX transport protocol
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-3-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to reuse this code when testing different transport
methods, so factor it out first.
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to reuse this code when testing different transport
methods, so factor it out first
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203111631.18796-2-ovoshcha@redhat.com>
[PMD: Split patch in 2, reworded subject and description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-arm: Unsupported NIC model: virtio-net-pci
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200129212345.20547-29-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
As we only read the serial console, we don't need to force a
VGA display. This fixes when running a binary built with
--without-default-devices:
ERROR: qemu-system-alpha: standard VGA not available
We also need the '-nodefaults' argument to avoid:
ERROR: qemu-system-alpha: Unsupported NIC model: e1000
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-27-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This test fails on various CI:
- Using QEMU 4.0:
tests/acceptance/x86_cpu_model_versions.py:X86CPUModelAliases.test_none_alias: ERROR: 'alias-of' (0.45 s)
- On OSX
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
- When removing unavailable machine:
VirtioMaxSegSettingsCheck.test_machine_types: ERROR: list.remove(x): x not in list (0.12 s)
- Using Xen:
xencall: error: Could not obtain handle on privileged command interface: No such file or directory
xen be core: xen be core: can't open xen interface
- On PPC:
TestFail: machine type pseries-2.8: No Transactional Memory support in TCG, try appending -machine cap-htm=off
- On S390X configured with --without-default-devices:
ERROR: qemu-system-s390x: -device virtio-scsi-pci,id=scsi0: 'virtio-scsi-pci' is not a valid device model name
Disable it for now.
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200206171715.25041-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't need the default options to run this test.
This fixes errors when running a binary built with
--without-default-devices such:
ERROR: qemu-system-s390x: Unknown device 'virtio-net-ccw' for bus 'virtual-css-bus'
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129212345.20547-25-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since, virtio_seg_max_adjust checks not only seg_max, but also
virtqueue_size parameter, let's make the test more general and
add new parameters to be checked there in the future.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20200129140702.5411-5-dplotnikov@virtuozzo.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.
Let's also make sure that we build the corresponding machines in Travis.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Avocado tags are handy to automatically select tests matching
the tags. Since this test also runs U-Boot, tag it.
We can run all the tests using U-Boot as once with:
$ avocado --show=app run -t u-boot tests/acceptance/
JOB LOG : avocado/job-results/job-2020-01-21T00.16-ee9344e/job.log
(1/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2: PASS (16.59 s)
(2/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot: PASS (0.47 s)
(3/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: PASS (2.43 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 19.78 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The second param in extract_from_deb() is 'path' not 'file'
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580142994-1836-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Change extract_from_deb() to use os.path routines to manipulate the
filesystem path returned when extracting a file.
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-7-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a method to extract a specified file from an RPM to the test's
working directory and return the path to the extracted file.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-5-git-send-email-liam.merwick@oracle.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need a function to interrupt interactive consoles.
Example: Interrupt U-Boot to set different environment values.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since we are going to re-use the code shared between
wait_for_console_pattern() and exec_command_and_wait_for_pattern(),
extract the common part into a local function.
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable some of the python-based tests in the "auto" group,
and these tests require virtio-blk to work properly. Running iotests
without virtio-blk likely does not make too much sense anyway, so instead
of adding a check for the availability of virtio-blk to each and every
test (which does not sound very appealing), let's rather add a check for
this a central spot in the "check" script instead (so that it is still
possible to run "make check" for qemu-system-tricore for example).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-6-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable 127 in the "auto" group, but it only works if
virtio-scsi and scsi-hd are available - which is not the case with
QEMU binaries like qemu-system-tricore for example, so we need a
proper check for the availability of these devices here.
A very similar problem exists in iotest 267 - it has been added to
the "auto" group already, but requires virtio-blk and thus currently
fails with qemu-system-tricore for example. Let's also add aproper
check there.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-5-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the long run, we might want to add test 183 to the "auto" group
(but it still fails occasionally, so we cannot do that yet). However,
when running 183 in Cirrus-CI on macOS, or with our vm-build-openbsd
target, it currently always fails with an "Timeout waiting for return
on handle 0" error.
Let's mark it as supported only on systems where the test is working
most of the time (i.e. Linux, FreeBSD and NetBSD).
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-4-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
041 works fine on Linux, FreeBSD, NetBSD and OpenBSD, but fails on macOS.
Let's mark it as only supported on the systems where we know that it is
working fine.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-3-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
verify_platform will check an explicit whitelist and blacklist instead.
The default will now be assumed to be allowed to run anywhere.
For tests that do not specify their platforms explicitly, this has the effect of
enabling these tests on non-linux platforms. For tests that always specified
linux explicitly, there is no change.
For Python tests on FreeBSD at least; only seven python tests fail:
045 147 149 169 194 199 211
045 and 149 appear to be misconfigurations,
147 and 194 are the AF_UNIX path too long error,
169 and 199 are bitmap migration bugs, and
211 is a bug that shows up on Linux platforms, too.
This is at least good evidence that these tests are not Linux-only. If
they aren't suitable for other platforms, they should be disabled on a
per-platform basis as appropriate.
Therefore, let's switch these on and deal with the failures.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20200121095205.26323-2-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Allow blockdevs to match the feature already present in qemu-nbd -D.
Enhance iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191114024635.11363-5-eblake@redhat.com>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
When we are copying we want to ensure we grab the first
resolution (the found in path section). However even that binary might
be a symlink so lets make sure we chase the symlinks to copy the right
binary to where it can be found.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200203090932.19147-3-alex.bennee@linaro.org>
This includes fixing up the dependencies (Which were already wrong for
one of the mips variants).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-2-alex.bennee@linaro.org>
Update comments in tests/qtest/bios-tables-test.c to reflect the
current path of bios-tables-test-allowed-diff.h, which is now under
tests/qtest/ as well.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200202110009.51479-1-guoheyi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's not a big deal, but 'check qtest-ppc/ppc64' runs fail if sanitizers is enabled.
The memory leak stack is as follow:
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x7f11756f5970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f1174f2549d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x556af05aa7da in mm_fw_cfg_init /mnt/sdb/qemu/tests/libqos/fw_cfg.c:119
#3 0x556af059f4f5 in read_boot_order_pmac /mnt/sdb/qemu/tests/boot-order-test.c:137
#4 0x556af059efe2 in test_a_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:47
#5 0x556af059f2c0 in test_boot_orders /mnt/sdb/qemu/tests/boot-order-test.c:59
#6 0x556af059f52d in test_pmac_oldworld_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:152
#7 0x7f1174f46cb9 (/lib64/libglib-2.0.so.0+0x73cb9)
#8 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#9 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#10 0x7f1174f46f71 in g_test_run_suite (/lib64/libglib-2.0.so.0+0x73f71)
#11 0x7f1174f46f94 in g_test_run (/lib64/libglib-2.0.so.0+0x73f94)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200203025935.36228-1-pannengyuan@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qos dependency files can be found under tests/qtest/libqos and
not under tests/qtest/qos.
Fixes: 1cf4323ecd ("Move the libqos files under tests/qtest/")
Message-Id: <20200127140245.20065-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-bridge isn't actually a test, it's just a helper
(that should probably move somewhere else) - but the build was
broken in the qtest move.
Fixes: 833884f37a
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200117122648.137862-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Checking for uninitialized variables raises warning for file path
variables in test_logfile_write and test_logfile_lock functions.
To suppress this warning, initialize varibles to NULL. This is safe
change as result of g_build_filename is stored to them before any usage.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <63b0fcedf7dfe799c8210b113e5dccf32414a89d.1579598240.git.mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some default features of the pseries machine are only available with
KVM. Warnings are printed when the pseries machine is used with another
accelerator:
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
This is annoying for CI since it usually runs without KVM. We already
disable features that emit similar warnings thanks to properties of
the pseries machine, but this is open-coded in various
places. Consolidate the set of properties in a single place. Extend it
to silence the above warnings. And use it in the various tests that
start pseries machines.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158059697130.1820292.7823434132030453110.stgit@bahia.lan>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Correct minor grammatical error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we know what the default value should be then we can test for
that as well as the feature existence.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined
This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().
Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=X4Ax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/pull-migration-pull-request' into staging
Migration pull request
# gpg: Signature made Wed 29 Jan 2020 10:57:23 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/pull-migration-pull-request:
migration/compress: compress QEMUFile is not writable
migration: Simplify get_qlist
multifd: Split multifd code into its own file
multifd: Make multifd_load_setup() get an Error parameter
multifd: Make multifd_save_setup() get an Error parameter
migration: Make checkpatch happy with comments
multifd: Use qemu_target_page_size()
multifd: multifd_send_sync_main only needs the qemufile
multifd: multifd_queue_page only needs the qemufile
multifd: multifd_send_pages only needs the qemufile
ram_addr: Split RAMBlock definition
migration/multifd: fix nullptr access in multifd_send_terminate_threads
migration: Create migration_is_running()
migration-test: Make sure that multifd and cancel works
migration: Don't send data if we have stopped
qemu-file: Don't do IO after shutdown
multifd: Make sure that we don't do any IO after an error
migration-test: Use g_free() instead of free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that this sequence works:
- launch source
- launch target
- start migration
- cancel migration
- relaunch target
- do migration again
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add Artist graphics
Fix main memory allocation
Improve LDCW emulation wrt real hw
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl4vMa8dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/3PwgAmw+Q/rT2kT19vMHd
1XHjK1WJNx4SFRQWxwMsbxDoWyFslUZH5G0z0l7zB1eG7ONEZBttUVyOVnyPH5Q5
DUmfHMvS838lHkLU+OWPbfbwB8WZzfwUwHi3u8ljRBM52RZYf+m69/yMRd8H+PmF
bDq3zCviAqvIIvWdSmPEfsx9v4WmrE2aULkKN2aZsHYHzkuHmPWfSYe2dzxTcO3z
zDXoscUVmtVk29jpwHV4gM7zl9uk8jyvfeeB2fZ2/EY4qgZ+iHrhtnglfCdCCDr0
G1Q5vugJ70lFkYM2EzpyU+leHUREXN7xqYm5Iycv4neO+aS2FFkNpxCZvPofihHo
rUFcOw==
=kj86
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-pa-20200127' into staging
Improve LASI emulation
Add Artist graphics
Fix main memory allocation
Improve LDCW emulation wrt real hw
# gpg: Signature made Mon 27 Jan 2020 18:53:35 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-pa-20200127:
target/hppa: Allow, but diagnose, LDCW aligned only mod 4
hw/hppa/machine: Map the PDC memory region with higher priority
hw/hppa/machine: Restrict the total memory size to 3GB
hw/hppa/machine: Correctly check the firmware is in PDC range
hppa: Add emulation of Artist graphics
seabios-hppa: update to latest version
hppa: Switch to tulip NIC by default
hppa: add emulation of LASI PS2 controllers
ps2: accept 'Set Key Make and Break' commands
hppa: Add support for LASI chip with i82596 NIC
hw/hppa/dino.c: Improve emulation of Dino PCI chip
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fuzzing the Linux kernel with syzkaller allowed to find how to crash qemu
using a special SCSI_IOCTL_SEND_COMMAND. It hits the assertion in
ide_dma_cb() introduced in the commit a718978ed5 in July 2015.
Currently this bug is not reproduced by the unit tests.
Let's improve the ide-test to cover more PRDT cases including one
that causes this particular qemu crash.
The test is developed according to the Programming Interface for
Bus Master IDE Controller (Revision 1.0 5/16/94).
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Message-id: 20191223175117.508990-3-alex.popov@linux.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Includes the following tests:
- Adding a dirty bitmap.
* RHBZ: 1782175
- Starting a drive-mirror to an NBD-backed target.
* RHBZ: 1746217, 1773517
- Aborting an external snapshot transaction.
* RHBZ: 1779036
- Aborting a blockdev backup transaction.
* RHBZ: 1782111
For each one of them, a VM with a number of disks running in an
IOThread AioContext is used.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Issuing a drive-backup from qmp_drive_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_drive_backup() and
drive_backup_prepare().
This change unifies both paths, merging do_drive_backup() and
drive_backup_prepare(), and changing qmp_drive_backup() to create a
transaction instead of calling do_backup_common() direcly.
As a side-effect, now qmp_drive_backup() is executed inside a drained
section, as it happens when creating a drive-backup transaction. This
change is visible from the user's perspective, as the job gets paused
and immediately resumed before starting the actual work.
Also fix tests 141, 185 and 219 to cope with the extra
JOB_STATUS_CHANGE lines.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The python code already contains a possibility to skip tests if the
corresponding driver is not available in the qemu binary - use it
in more spots to avoid that the tests are failing if the driver has
been disabled.
While we're at it, we can now also remove some of the old checks that
were using iotests.supports_quorum() - and which were apparently not
working as expected since the tests aborted instead of being skipped
when "quorum" was missing in the QEMU binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "migration completed" event may be sent (on the source, to be
specific) before the migration is actually completed, so the VM runstate
will still be "finish-migrate" instead of "postmigrate". So ask the
users of VM.wait_migration() to specify the final runstate they desire
and then poll the VM until it has reached that state. (This should be
over very quickly, so busy polling is fine.)
Without this patch, I see intermittent failures in the new iotest 280
under high system load. I have not yet seen such failures with other
iotests that use VM.wait_migration() and query-status afterwards, but
maybe they just occur even more rarely, or it is because they also wait
on the destination VM to be running.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the set of operations and test described in LP 1859713.
Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the test vector from the QARMA paper, run through PACGA.
Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.
Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the ACPI spec (version 6.1, section 6.1.5 _HID) it is not required
on enumerated buses (like PCI in this case), _ADR is required (and is
already there). And the _HID value is wrong. Linux appears to ignore
the _HID entry, but Windows 10 detects it as 'Unknown Device' and there
is no driver available. See https://bugs.launchpad.net/qemu/+bug/1856724
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200120170725.24935-6-minyard@acm.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test lockable SMRAM at default SMBASE feature, introduced by
patch "q35: implement 128K SMRAM at default SMBASE address"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575899217-333105-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support QLIST migration using the same principle as QTAILQ:
94869d5c52 ("migration: migrate QTAILQ").
The VMSTATE_QLIST_V macro has the same proto as VMSTATE_QTAILQ_V.
The change mainly resides in QLIST RAW macros: QLIST_RAW_INSERT_HEAD
and QLIST_RAW_REVERSE.
Tests also are provided.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set multifd-channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts
-----BEGIN PGP SIGNATURE-----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=R9Xb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200117-1' into staging
Add model of the Netduino Plus 2 board
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts
# gpg: Signature made Fri 17 Jan 2020 14:27:40 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200117-1:
target/arm: Set ISSIs16Bit in make_issinfo
target/arm: Return correct IL bit in merge_syn_data_abort
arm/gicv3: update virtual irq state after IAR register read
target/arm: adjust program counter for wfi exception in AArch32
i.MX: add an emulation for RNGC
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
hw/arm/allwinner-a10: Remove local qemu_irq variables
hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()
hw/arm/allwinner-a10: Move SoC definitions out of header
tests/boot_linux_console: Add a SD card test for the CubieBoard
tests/boot_linux_console: Add initrd test for the CubieBoard
hw/arm: Add the Netduino Plus 2
hw/arm: Add the STM32F4xx SoC
hw/misc: Add the STM32F4xx EXTI device
hw/misc: Add the STM32F4xx Sysconfig device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
[...]
console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
console: ahci-sunxi 1c18000.sata: flags: ncq only
console: scsi host0: ahci-sunxi
console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
console: of_cfs_init
console: of_cfs_init: OK
console: vcc3v0: disabling
console: vcc5v0: disabling
console: usb1-vbus: disabling
console: usb2-vbus: disabling
console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
console: ata1.00: applying bridge limits
console: ata1.00: configured for UDMA/100
console: scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
console: sd 0:0:0:0: Attached scsi generic sg0 type 0
console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
console: sd 0:0:0:0: [sda] Write Protect is off
console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
console: sd 0:0:0:0: [sda] Attached SCSI disk
console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
[...]
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 8 0 20480 sda
console: reboot
console: / # reboot
[...]
console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
console: reboot: Restarting system
PASS (48.39 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a CubieBoard and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=50c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Cubietech Cubieboard
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: processor : 0
console: model name : ARMv7 Processor rev 0 (v7l)
console: BogoMIPS : 832.51
[...]
console: Hardware : Allwinner sun4i/sun5i Families
console: Revision : 0000
console: Serial : 0000000000000000
console: cat /proc/iomem
console: / # cat /proc/iomem
console: 01c00000-01c0002f : system-control@1c00000
console: 01c02000-01c02fff : dma-controller@1c02000
console: 01c05000-01c05fff : spi@1c05000
console: 01c0b080-01c0b093 : mdio@1c0b080
console: 01c0c000-01c0cfff : lcd-controller@1c0c000
console: 01c0d000-01c0dfff : lcd-controller@1c0d000
console: 01c0f000-01c0ffff : mmc@1c0f000
[...]
PASS (54.35 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20191230110953.25496-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not allocate resources in case we return early, and make sure
to free dest_cmdline at the end.
Reported-by: Euler Robot <euler.robot@huawei.com>
Reported-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200116140736.9498-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e51e711b1b has moved the initialization of start_address and
end_address after the definition of the command line argument,
where the nvramrc is initialized, and thus the loop is between 0 and 0
rather than 1 MiB and 100 MiB.
It doesn't affect the result of the test if all the tests are run in
sequence because the two first tests don't run the loop, so the
values are correctly initialized when we actually need them.
But it hangs when we ask to run only one test, for instance:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \
tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error
Fixes: e51e711b1b ("tests/migration: Add migration-test header file")
Cc: wei@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200107163437.52139-1-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit 1e8a1fae7464("test: Move qtests to a separate
directory") qtests are now placed in a separate folder and
this breaks the script used to rebuild the expected ACPI
tables for bios-tables-test. Update the script with correct
path.
Fixes: 1e8a1fae7464("test: Move qtests to a separate directory")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114165138.15716-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a sub-module doesn't contain any definitions, we don't generate
code for it, but we do generate the #include.
We generate code only for modules that get visited.
QAPISchema.visit() visits only modules that have definitions. It can
visit modules multiple times.
Clean this up as follows. Collect entities in their QAPISchemaModule.
Have QAPISchema.visit() call QAPISchemaModule.visit() for each module.
Have QAPISchemaModule.visit() call .visit_module() for itself, and
QAPISchemaEntity.visit() for each of its entities. This way, we visit
each module exactly once.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 5d75648b56 "qapi: Generate QAPIEvent stuff into separate files"
added tests/test-qapi-emit-events.[ch] to the set of generated files,
but neglected to update tests/.gitignore and tests/Makefile.include.
Commit a0af8cee3c "tests/.gitignore: ignore test-qapi-emit-events.[ch]
for in-tree builds" fixed the former. Now fix the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Build index.html for docs
-----BEGIN PGP SIGNATURE-----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=CchM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging
* Move qtests into a separate directory
* Build index.html for docs
# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-12:
docs: build an index page for the HTML docs
tests/libqos: Move the libqos files under tests/qtest/
tests/Makefile: Move qtest-related settings to a separate Makefile.include
test: Move qtests to a separate directory
tests/Makefile: Separate unit test dependencies from qtest dependencies
tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
tests/ptimer: Remove unnecessary inclusion of libqtest.h
tests/Makefile: test-char does not need libqtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tests/Makefile.include is pretty much overcrowded. Now that we have a
dedicated folder for the qtests, let's move the related settings
to a Makefile.include file in that directory instead.
Message-Id: <20191218103059.11729-7-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some of the unit test dependencies are declared right in the block of
the qtest dependencies. Let's move them to the other unit tests instead.
Message-Id: <20191218103059.11729-5-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's much easier if we simply add the folder prefix and the exe suffix
later via a substitution instead.
Message-Id: <20191218103059.11729-4-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ptimer-test is a unit test, not a qtest, so libqtest.h is not
required here.
Message-Id: <20191218103059.11729-3-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No need to link the libqtest objects here.
Message-Id: <20191218103059.11729-2-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are linux-user users of semihosting so we'd better check things
work for them as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There are two types of ARM semicall - lets test them both. Putting the
logic in a header will make re-using the functions easier later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Re-calling the main make is counter-productive and really messes up
with parallel builds. Just ensure we have built the pre-requisites
before we build the fp-test bits. If the user builds manually just
complain if the parent build hasn't got the bits we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
FreeBSD seems to use python37 by default now, which breaks the build
script. Add python to the package list, to explicitly pick the version,
and also adapt the configure command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200106123746.18201-1-kraxel@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On older versions of glib (anything prior to glib commit 0f056ebe
from May 2019), the implementation of g_source_ref() and
g_source_unref() is not threadsafe for a GSource which is not
attached to a GMainContext.
QEMU's real iothread.c implementation always attaches its
iothread->ctx's GSource to a GMainContext created for that iothread,
so it is OK, but the simple test framework implementation in
tests/iothread.c was not doing this. This was causing intermittent
assertion failures in the test-aio-multithread subtest
"/aio/multi/mutex/contended" test on the BSD hosts. (It's unclear
why only BSD seems to have been affected -- perhaps a combination of
the specific glib version being used in the VMs and their happening
to run on a host with a lot of CPUs).
Borrow the iothread_init_gcontext() from the real iothread.c
and add the corresponding cleanup code and the calls to
g_main_context_push/pop_thread_default() so we actually use
the GMainContext we create.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20200106144552.7205-1-peter.maydell@linaro.org
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
-----BEGIN PGP SIGNATURE-----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=M4kD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging
Add dbus-vmstate
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
# gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/dbus-vmstate7-pull-request:
tests: add dbus-vmstate-test
tests: add migration-helpers unit
dockerfiles: add dbus-daemon to some of latest distributions
configure: add GDBUS_CODEGEN
Add dbus-vmstate object
util: add dbus helper unit
docs: start a document to describe D-Bus usage
vmstate: replace DeviceState with VMStateIf
vmstate: add qom interface to get id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Minor fixes and tests from the freeze period (too minor to be included
in 4.2)
- Allow many bash iotests to test qcow2's external data file feature
- Add compress filter driver
- Fix Python iotests after 6f6e1698a6
- Fix for the backup job
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl4TRSISHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AOiUIAJKWyzc+d7Fe4mwYamrNq5kf3dadw0qp
t4HGjQ5vn+u4I4FH7NwSlx7qpWcerqxijeOJUYPMzCAS2/cm6OG4ETcPzfM+TeZL
sJupvu1aloUnJiQxs424KD5AClHftByu+KpDOYmt8HmuSG+PkXvrz3q5bfJEjBQ3
ZVKp7Ye8XkSLMPFlOavJGiniEx9huzQ7d1PHxZjpq+GrowFN+vGBuRu2+GfYQSIl
+F1XbojSA7X91DDLgLbgZbTrwA4ph9qUJF1ObzhCToL2JcTt8H4Wleujaah2czi5
2tOt1xKGtXy0mSx8ToJSI9JYIy/R/cGp7J9RNWgWa9OvNftgCJ10mAs=
=EHAE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-01-06' into staging
Block patches:
- Minor fixes and tests from the freeze period (too minor to be included
in 4.2)
- Allow many bash iotests to test qcow2's external data file feature
- Add compress filter driver
- Fix Python iotests after 6f6e1698a6
- Fix for the backup job
# gpg: Signature made Mon 06 Jan 2020 14:33:06 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-01-06: (34 commits)
backup-top: Begin drain earlier
tests/qemu-iotests: Update tests to recent desugarized -accel option
tests/qemu-iotests: add case to write compressed data of multiple clusters
qcow2: Allow writing compressed data of multiple clusters
block: introduce compress filter driver
iotests: Allow check -o data_file
iotests: Disable data_file where it cannot be used
iotests: Make 198 work with data_file
iotests: Make 137 work with data_file
iotests: Make 110 work with data_file
iotests: Make 091 work with data_file
iotests: Avoid cp/mv of test images
iotests: Use _rm_test_img for deleting test images
iotests: Avoid qemu-img create
iotests: Drop IMGOPTS use in 267
iotests: Replace IMGOPTS='' by --no-opts
iotests: Replace IMGOPTS= by -o
iotests: Inject space into -ocompat=0.10 in 051
iotests: Add -o and --no-opts to _make_test_img
iotests: Let _make_test_img parse its parameters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It tests proper seg_max_adjust settings for all machine types except
'none', 'isapc', 'microvm'
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-3-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move a few helper functions from migration-test.c to migration-helpers.c
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an interface to get the instance id, instead of depending on
Device and qdev_get_dev_path().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 6f6e1698a6 desugarized "-machine accel=" to a list
of "-accel" options. Since now "-machine accel" and "-accel"
became incompatible, update the iotests to the new format.
Error reported here:
https://gitlab.com/qemu-project/qemu/-/jobs/385801004#L3400
Reported-by: GitLab CI
Fixes: 6f6e1698a6 (vl: configure accelerators from -accel options)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200106130951.29873-1-philmd@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the case to the iotest #214 that checks possibility of writing
compressed data of more than one cluster size. The test case involves
the compress filter driver showing a sample usage of that.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1575288906-551879-4-git-send-email-andrey.shinkevich@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The problem with allowing the data_file option is that you want to use a
different data file per image used in the test. Therefore, we need to
allow patterns like -o data_file='$TEST_IMG.data_file'.
Then, we need to filter it out from qemu-img map, qemu-img create, and
remove the data file in _rm_test_img.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-22-mreitz@redhat.com
[mreitz: Also disable 273]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We do not care about the json:{} filenames here, so we can just filter
them out and thus make the test work both with and without external data
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When using an external data file, there are no refcounts for data
clusters. We thus have to adjust the corruption test in this patch to
not be based around a data cluster allocation, but the L2 table
allocation (L2 tables are still refcounted with external data files).
Furthermore, we should not print qcow2.py's list of incompatible
features because it differs depending on whether there is an external
data file or not.
With those two changes, the test will work both with and without
external data files (once that options works with the iotests at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only difference is that the json:{} filename of the image looks
different. We actually do not care about that filename in this test, we
are only interested in (1) that there is a json:{} filename, and (2)
whether the backing filename can be constructed.
So just filter out the json:{} data, thus making this test pass both
with and without data_file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image end offset as reported by qemu-img check is different when
using an external data file; we do not care about its value here, so we
can just filter it. Incidentally, common.rc already has _check_test_img
for us which does exactly that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will not work with external data files, so try to get tests working
without it as far as possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.
(In the process, clean up the indentation of every _cleanup() this patch
touches.)
((Also, use quotes consistently. I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use _make_test_img whenever possible. This way, we will not ignore
user-specified image options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Overwriting IMGOPTS means ignoring all user-supplied options, which is
not what we want. Replace the current IMGOPTS use by a new BACKING_FILE
variable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests should not overwrite all user-supplied image options, but only add
to it (which will effectively overwrite conflicting values). Accomplish
this by passing options to _make_test_img via -o instead of $IMGOPTS.
For some tests, there is no functional change because they already only
appended options to IMGOPTS. For these, this patch is just a
simplification.
For others, this is a change, so they now heed user-specified $IMGOPTS.
Some of those tests do not work with all image options, though, so we
need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It did not matter before, but now that _make_test_img understands -o, we
should use it properly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Blindly overriding IMGOPTS is suboptimal as this discards user-specified
options. Whatever options the test needs should simply be appended.
Some tests do this (with IMGOPTS=$(_optstr_add "$IMGOPTS" "...")), but
that is cumbersome. It’s simpler to just give _make_test_img an -o
parameter with which tests can add options.
Some tests actually must override the user-specified options, though,
for example when creating an image in a different format than the test
$IMGFMT. For such cases, --no-opts allows clearing the current option
list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to add more options than just -b.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IMGOPTS can never be empty for qcow2, because the check scripts adds
compat=1.1 unless the user specified any compat option themselves.
Thus, this block does not do anything and can be dropped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests require compat=1.1 and thus set IMGOPTS='compat=1.1'
globally. That is not how it should be done; instead, they should
simply set _unsupported_imgopts to compat=0.10 (compat=1.1 is the
default anyway).
This makes the tests heed user-specified $IMGOPTS. Some do not work
with all image options, though, so we need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsky@redhat.com>
Message-id: 20191107163708.833192-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test can run just fine with other values for refcount_bits, so we
should filter the value from qcow2.py's dump-header. In fact, we can
filter everything but the feature bits and header extensions, because
that is what the test is about.
(036 currently ignores user-specified image options, but that will be
fixed in the next patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Print the feature fields as a set of bits so that filtering is easier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is useful for tests that want to whitelist fields from dump-header
(with grep) but still print all header extensions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Probably due to blind copy-pasting, we have several instances of "qocw2"
in our iotests. Fix them.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191108123455.39445-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Callers can use this new parameter to expect failure during the
completion process.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191108123455.39445-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
ACPI table HMAT has been introduced, QEMU now builds HMAT tables for
Heterogeneous Memory with boot option '-numa node'.
Add test cases on PC and Q35 machines with 2 numa nodes.
Because HMAT is generated when system enable numa, the
following tables need to be added for this test:
tests/data/acpi/pc/APIC.acpihmat
tests/data/acpi/pc/SRAT.acpihmat
tests/data/acpi/pc/HMAT.acpihmat
tests/data/acpi/pc/DSDT.acpihmat
tests/data/acpi/q35/APIC.acpihmat
tests/data/acpi/q35/SRAT.acpihmat
tests/data/acpi/q35/HMAT.acpihmat
tests/data/acpi/q35/DSDT.acpihmat
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jingqi Liu <Jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-9-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check configuring HMAT usecase
Acked-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-8-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
-----BEGIN PGP SIGNATURE-----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=laVP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
# gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (30 commits)
iotests: Test external snapshot with VM state
hmp: Allow using qdev ID for qemu-io command
block: Activate recursively even for already active nodes
iotests: 211: Remove duplication with VM.blockdev_create()
iotests: 207: Remove duplication with VM.blockdev_create()
iotests: 266: Convert to VM.blockdev_create()
iotests: 237: Convert to VM.blockdev_create()
iotests: 213: Convert to VM.blockdev_create()
iotests: 212: Convert to VM.blockdev_create()
iotests: 210: Convert to VM.blockdev_create()
iotests: 206: Convert to VM.blockdev_create()
iotests: 255: Drop blockdev_create()
iotests: Create VM.blockdev_create()
qcow2: Move error check of local_err near its assignment
iotests: Fix IMGOPTSSYNTAX for nbd
iotests/273: Filter format-specific information
iotests: Add more "_require_drivers" checks to the shell-based tests
MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header
qcow2: Use offset_into_cluster()
iotests: Support job-complete in run_job()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0. Drop Python
2 support from configure completely, and require Python 3.5 or
newer.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191016224237.26180-1-ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tests creating an external snapshot with VM state (which results in
an active overlay over an inactive backing file, which is also the root
node of an inactive BlockBackend), re-activating the images and
performing some operations to test that the re-activation worked as
intended.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blockdev_create() function in this test case adds an error check
that skips the test in case of failure because of memory shortage, but
provides otherwise the same functionality as VM.blockdev_create() from
iotests.py. Make it a thin wrapper around the iotests.py function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
