Just like the previous tests, boots a Linux kernel on a s390x target
using the s390-ccw-virtio machine.
Because it's not possible to have multiple VT220 consoles,
'-nodefaults' is used, so that the one set with set_console() works
correctly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-20-crosa@redhat.com>
[ehabkost: Updated kernel URL to point to fedoraproject.org]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on an arm target
using the virt machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-19-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a aarch64 target
using the virt machine.
One special option added is the CPU type, given that the kernel
selected fails to boot on the virt machine's default CPU (cortex-a15).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-18-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working.
If mips64el is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips64el"
tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips64el tests/acceptance
$ avocado run -t machine:malta tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190312171824.5134-15-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. Also, it relies on the serial
device set by the machine itself.
If mips is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips tests/acceptance
$ avocado run -t machine:malta tests/acceptance
$ avocado run -t endian:big tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312171824.5134-14-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This introduces a utility method that monitors the console device and
looks for either a message that signals the test success or failure.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-12-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When running on very low powered environments, some tests may time out
causing false negatives. As a conservative change, and for
considering that human time (investigating false negatives) is worth
more than some extra machine cycles (and time), let's increase the
overall timeout.
CC: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-11-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'printk.time=0' option makes it easier to parse the console
output. Let's set it as a default, and reusable, kernel command line
options for this and future similar tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-10-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update to the stock Fedora 29 kernel, from the Fedora 28. New tests
will be added using the 29 kernel, so for consistency, let's also
update it here.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190312171824.5134-9-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Given that the test is specific to x86_64 and pc, and new tests are
going to be added to the same class, let's rename it accordingly.
Also, let's make the class documentation not architecture specific.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-8-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A test can, optionally, be tagged for one or many architectures. If a
test has been tagged for a single architecture, there's a high chance
that the test won't run on other architectures. This changes the
default order of choosing a default target architecture to use based
on the 'arch' tag value first.
The precedence order is for choosing a QEMU binary to use for a test
is now:
* qemu_bin parameter
* arch parameter
* arch tag value (for example, x86_64 if "🥑 tags=arch:x86_64
is used)
This means that if one runs:
$ avocado run -p qemu_bin=/usr/bin/qemu-system-x86_64 test.py
No arch parameter or tag will influence the selection of the QEMU
target binary. If one runs:
$ avocado run -p arch=ppc64 test.py
The target binary selection mechanism will attempt to find a binary
such as "ppc64-softmmu/qemu-system-ppc64". And finally, if one runs
a test that is tagged (in its docstring) with "arch:aarch64":
$ avocado run aarch64.py
The target binary selection mechanism will attempt to find a binary
such as "aarch64-softmmu/qemu-system-aarch64".
At this time, no provision is made to cancel the execution of tests if
the arch parameter given (manually) does not match the test "arch"
tag, but it may be a useful default behavior to be added in the
future.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-7-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's useful to define the architecture that should be used in
situations such as:
* the intended target of the QEMU binary to be used on tests
* the architecture of code to be run within the QEMU binary, such
as a kernel image or a full blown guest OS image
This commit introduces both a test parameter and a test instance
attribute, that will contain such a value.
Now, when the "arch" test parameter is given, it will influence the
selection of the default QEMU binary, if one is not given explicitly
by means of the "qemu_img" parameter.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-5-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Making it clear what is returned by this utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the Cascadelake-Server, Icelake-Client, and
Icelake-Server are always generating the following warning:
qemu-system-x86_64: warning: \
host doesn't support requested feature: CPUID.07H:ECX [bit 4]
This happens because OSPKE was never returned by
GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word().
OSPKE is a runtime flag automatically set by the KVM module or by
TCG code, was always cleared by x86_cpu_filter_features(), and
was not supposed to appear on the CPU model table.
Remove the OSPKE flag from the CPU model table entries, to avoid
the bogus warning and avoid returning invalid feature data on
query-cpu-* QMP commands. As OSPKE was always cleared by
x86_cpu_filter_features(), this won't have any guest-visible
impact.
Include a test case that should detect the problem if we introduce
a similar bug again.
Fixes: c7a88b52f6 ("i386: Add new model of Cascadelake-Server")
Fixes: 8a11c62da9 ("i386: Add new CPU model Icelake-{Server,Client}")
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190319200515.14999-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
XLF_CAN_BE_LOADED_ABOVE_4G is set on vmlinuz shipped by Fedora-28 so that
it's allowed to be loaded below 4 GB address.
timeout is updated to 5 minutes as well since we need more time to load a
large initrd to the guest
CC: Wainer dos Santos Moschetta <wainersm@redhat.com>
CC: Caio Carrara <ccarrara@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <1548638112-31101-2-git-send-email-lizhijian@cn.fujitsu.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
QEMU have already supported to load up to 4G initrd if the sepcified memory is
enough and XLF_CAN_BE_LOADED_ABOVE_4G is set by guest kernel
linux-3.6 kernel shipped by Fedora-18 cannot support xldflags so that it
cannot support loading more than 2GiB initrd
CC: Wainer dos Santos Moschetta <wainersm@redhat.com>
CC: Caio Carrara <ccarrara@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <1548638112-31101-1-git-send-email-lizhijian@cn.fujitsu.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This change adds the simplest possible migration test. Beyond the test
purpose itself it's also useful to exercise the multi virtual machines
capabilities from base avocado qemu test class.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190212193855.13223-3-ccarrara@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This change adds the possibility to write acceptance tests with multi
virtual machine support. It's done keeping the virtual machines objects
stored in a test attribute (dictionary). This dictionary shouldn't be
accessed directly but through the new method added `get_vm`. This new
method accept a list of args (that will be added as virtual machine
arguments) and an optional name argument. The name is the key that
identify a single virtual machine along the test machines available. If
a name without a machine is informed a new machine will be instantiated.
The current usage of vm in tests will not be broken by this change since
it keeps a property called vm in the base test class. This property only
calls the new method `get_vm` with default parameters (no args and
'default' as machine name).
Signed-off-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190212193855.13223-2-ccarrara@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The Avocado test runner attemps to find its INSTRUMENTED (that is,
Python based tests) in a manner that is as safe as possible to the
user. Different from plain Python unittest, it won't load or
execute test code on an operation such as:
$ avocado list tests/acceptance/
Before version 68.0, the logic implemented to identify INSTRUMENTED
tests would require either the "🥑 enable" or "🥑
recursive" statement as a flag for tests that would not inherit
directly from "avocado.Test". This is not necessary anymore,
and because of that the boiler plate statements can now be removed.
Reference: https://avocado-framework.readthedocs.io/en/68.0/release_notes/68_0.html#users-test-writers
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190218173723.26120-1-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
QEMU used to exits with a not accurate error message when
an initrd > 2GiB was passed. That was fixed on patch:
commit f3839fda57
Author: Li Zhijian <lizhijian@cn.fujitsu.com>
Date: Thu Sep 13 18:07:13 2018 +0800
change get_image_size return type to int64_t
This change adds a regression test for that fix. It starts
QEMU with a 2GiB dummy initrd, and checks that it evaluates the
file size correctly and prints an accurate message.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181109182153.5390-1-wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Many of the current virtio-*-pci device types actually represent
3 different types of devices:
* virtio 1.0 non-transitional devices
* virtio 1.0 transitional devices
* virtio 0.9 ("legacy device" in virtio 1.0 terminology)
That would be just an annoyance if it didn't break our device/bus
compatibility QMP interfaces. With these multi-purpose device
types, there's no way to tell management software that
transitional devices and legacy devices require a Conventional
PCI bus.
The multi-purpose device types would also prevent us from telling
management software what's the PCI vendor/device ID for them,
because their PCI IDs change at runtime depending on the bus
where they were plugged.
This patch adds separate device types for each of those virtio
device flavors:
- virtio-*-pci: the existing multi-purpose device types
- Configurable using `disable-legacy` and `disable-modern`
properties
- Legacy driver support is automatically enabled/disabled
depending on the bus where it is plugged
- Supports Conventional PCI and PCI Express buses
(but Conventional PCI is incompatible with
disable-legacy=off)
- Changes PCI vendor/device IDs at runtime
- virtio-*-pci-transitional: virtio-1.0 device supporting legacy drivers
- Supports Conventional PCI buses only, because
it has a PIO BAR
- virtio-*-pci-non-transitional: modern-only
- Supports both Conventional PCI and PCI Express buses
The existing TYPE_* macros for these types will point to an
abstract base type, so existing casts in the code will keep
working for all variants.
A simple test script (tests/acceptance/virtio_version.py) is
included, to check if the new device types are equivalent to
using the `disable-legacy` and `disable-modern` options.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test boots a Linux kernel, and checks that the given command
line was effective in two ways:
* It makes the kernel use the set "console device" as a console
* The kernel records the command line as expected in the console
Given that way too many error conditions may occur, and detecting the
kernel boot progress status may not be trivial, this test relies on a
timeout to handle unexpected situations. Also, it's *not* tagged as a
quick test for obvious reasons.
It may be useful, while interactively running/debugging this test, or
tests similar to this one, to show some of the logging channels.
Example:
$ avocado --show=QMP,console run boot_linux_console.py
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20180530184156.15634-6-crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds a few simple behavior tests for VNC.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180530184156.15634-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds the very minimum infrastructure necessary for writing
and running functional/acceptance tests, including:
* Documentation
* The avocado_qemu.Test base test class
* One example tests (version.py)
Additional functionality is expected to be added along the tests that
require them.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20180530184156.15634-2-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[ehabkost: fix typo on testing.rst]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
