"make check-speed" has been broken since the removal of ninja2make
last October. It was just a backwards-compatibility alias for
"make bench-speed", which in turn is in principle a subset of
"make bench". Advertise the latter and drop "make check-speed"
completely since no one has noticed.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210310164612.285362-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Previously, tests were being filtered by the matching target
architectures to be built. The benefit, compared to the current
situation, is a more concise test job that won't show tests canceled
because a matching QEMU binary was not found (those tests won't even
be attempted).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "get-vm-images" target defined in tests/Makefile.include is a
prerequisite for "check-acceptance", so that those files get
downloaded before the Avocado job even starts.
It looks like on c401c058a1 a TARGETS variable was introduced with a
different content than it was previously coming from the main
Makefile. From that point on, the "get-vm-images" succeed without
doing anything because there was no matching architecture to download.
This restores the download of images (that match targets to be built)
before the job starts, eliminating downloads and their associated
failures during the tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210225232122.1254879-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
TARGET_DIRS reflects what we wanted to configure which in the normal
case is all our targets. However once meson has pared-down our target
list due to missing features we need to check the final list of
ninja-targets. This prevents check-tcg barfing on a --disable-tcg
build.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210202134001.25738-14-alex.bennee@linaro.org>
There are some places where the conditional makefile support is the
simplest solution. Now we don't expose CONFIG_TCG as a variable create
a new one that can be checked for the check-help output.
As check-tcg is a PHONY target we re-use check-softfloat to gate that
as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210202134001.25738-13-alex.bennee@linaro.org>
check-block.sh called by make check-block rely on PYTHON variable being
set.
Fixes: f203080bbd
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129051346.56109-1-vsementsov@virtuozzo.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove from check-block the requirement that all TARGET_DIRS are built.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pattern rules to clarify which targets are going to match the
rule and to provide clearer error messages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have an exploding complexity problem in the testing so lets just
move the more involved plugins into contrib. tests/plugins still exist
for the basic plugins that exercise the API. We restore the old
pre-meson style Makefile for contrib as it also doubles as a guide for
out-of-tree plugin builds.
While we are at it add some examples to the documentation and a
specific plugins build target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200909112742.25730-11-alex.bennee@linaro.org>
Reverse debugging test uses gdb remote client of avocado framework.
This client was fixed since the currently used version 76.
Therefore this patch bumps the version to 81 and fixes command
line version compatibility issue.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159903462803.28509.16851113546106095750.stgit@pasha-ThinkPad-X280>
Message-Id: <20200908202352.298506-2-philmd@redhat.com>
Message-Id: <20200909112742.25730-9-alex.bennee@linaro.org>
Makefile.objs, the .d files and various CONFIG_* symbols are not
used anymore by the Make side of the build; they are only processed
by Meson. We can delete them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use meson benchmark() for them, adjust mtest2make.py for that.
A new target "make bench" can be used to run all benchmarks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-14-marcandre.lureau@redhat.com>
[Rewrite mtest2make part. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was covered already in commit d3ca592b3c ("meson: convert check-block")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is required by test-qht-par unit test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the variable to be more explicit. A further clean-up patch will
move the actual to dependency check to meson entirely.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- builds QAPI builtins types/visitor to fix a linking issue with
unresolved symbols in the static library.
- work around a meson limitation on generated file output directories.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
test-image-locking.c uses the qemu_lock_fd_test() function which is
only available on POSIX-like systems.
Message-Id: <20200804170055.2851-4-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200823111757.72002-4-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rules to execute tests are generated by a simple Python program
that integrates into the existing "make check" mechanism. This
provides familiarity for developers, and also allows piecewise
conversion of the testsuite Makefiles to meson.
The generated rules are based on QEMU's existing test harness
Makefile and TAP parser.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
If a test is unsuccessful, the result is "not ok", which does not match
the regex because it includes a space.
This regex matches both "ok" and "not ok".
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20200628213046.2028271-1-hskinnemoen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable a few tests under CONFIG_TSAN, which
run into a known TSan issue that results in a hang.
https://github.com/google/sanitizers/issues/1116
The disabled tests under TSan include all the qtests as well as
the test-char, test-qga, and test-qdev-global-props.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-14-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-17-alex.bennee@linaro.org>
Add tests:
test_secret_keyring_good;
test_secret_keyring_revoked_key;
test_secret_keyring_expired_key;
test_secret_keyring_bad_serial_key;
test_secret_keyring_bad_key_access_right;
Added tests require libkeyutils. The absence of this library is not
critical, because these tests will be skipped in this case.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the next commit we are going to remove some objects from the
util-obj-y variable (objects which are not used by user-mode,
when configured with --disable-system).
Then some system-mode tests are going to fail, due to the missing
objects:
$ make check-unit -k
LINK tests/test-iov
/usr/bin/ld: tests/test-iov.o: in function `iov_from_buf':
include/qemu/iov.h:49: undefined reference to `iov_from_buf_full'
make: *** [rules.mak:124: tests/test-iov] Error 1
LINK tests/test-timed-average
/usr/bin/ld: tests/test-timed-average.o: in function `account':
tests/test-timed-average.c:27: undefined reference to `timed_average_account'
make: *** [rules.mak:124: tests/test-timed-average] Error 1
LINK tests/test-util-filemonitor
/usr/bin/ld: tests/test-util-filemonitor.o: in function `qemu_file_monitor_test_event_loop':
tests/test-util-filemonitor.c:83: undefined reference to `main_loop_wait'
make: *** [rules.mak:124: tests/test-util-filemonitor] Error 1
LINK tests/test-util-sockets
/usr/bin/ld: tests/test-util-sockets.o: in function `test_socket_fd_pass_name_good':
tests/test-util-sockets.c:91: undefined reference to `socket_connect'
make: *** [rules.mak:124: tests/test-util-sockets] Error 1
LINK tests/test-base64
/usr/bin/ld: tests/test-base64.o: in function `test_base64_good':
tests/test-base64.c:35: undefined reference to `qbase64_decode'
collect2: error: ld returned 1 exit status
make: *** [rules.mak:124: tests/test-base64] Error 1
LINK tests/test-bufferiszero
/usr/bin/ld: tests/test-bufferiszero.o: in function `test_1':
tests/test-bufferiszero.c:31: undefined reference to `buffer_is_zero'
make: *** [rules.mak:124: tests/test-bufferiszero] Error 1
make: Target 'check-unit' not remade because of errors.
Instead, restrict these tests to system-mode, by using the
$(CONFIG_SOFTMMU) variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The description of "make check" is out-of-date, so fix it by adding
block and softfloat.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588674291-6486-1-git-send-email-chenhc@lemote.com>
Split the float conversion tests into separate groups and audit the
tests to check what is still broken. I was able to enable a bunch of
tests that had been missed before:
all the float to float conversions
ui32_to_extF80
ui64_to_extF80
extF80_to_ui32
extF80_to_ui32_r_minMag
extF80_to_ui64
extF80_to_ui64_r_minMag
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-7-alex.bennee@linaro.org>
These have been fixed now so we no longer need a special version of
the le_quiet rule to skip the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-6-alex.bennee@linaro.org>
Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEeruW64tGuU1eD+m7ZX6NM6XyCfMFAl5xaEMACgkQZX6NM6Xy
CfPUDQ/+IACVcfF6LdPB/vwhBaKx8/fqpJEnyL8AFCkYrIVWw0c9zizjTobWbl8H
qxDfqvM+O4ENy12ClG0LkyRN9sVs6IGlpE4f50kKqttd5GA8bBSvamv5iCxZ1fn8
IsR/uH5sQt8aqENxDiIszZH+UEATsFL916KyMre8faqEN8xzFvnFeQ+pT0s5sF9v
XpXdS1D9JtI00pFmNz/4jkyzB4uG6D20NjoHOSS8IWMx9jOAQn5++VC6183lxdpK
ty7adf0y0brC9BCEua4FdCHliDYgYbO5hdsk6oWWUQRvnYEFajXgV/nEdqV+rCG8
9KEKC7sdbOwkbXxwtfjMQ7QK51Xhz7P0d2j0+vn96V0MIve4GM0Z9vx87Psy+4T3
KJqM7GISDiFtMs2Zi2D+o4nyL4m4fS1AzbAeEWH1dwl7RaAb1zKr7F2hFSHIkNHh
Z1cnoFhm0kXQFhFqMwjY5ackV+pYm8qSXroG3SvghPByb78LwBx5rzE37clW5HDa
VO/pRnY0FIyYldOlu+XHGCwCgiaVQ0mUb9DOwpPL+WukZUY1y6bxWlamMvIBM0ko
l1rYlnz0mEwpLptctlob0Vo/Js/jbyxT0XRcTbJq3FexFeEykFtFwW8hfT63xJXo
En9cVkyEWzgT9Ici3HNOwLz5iJCfkWjx/ecRtA6TBeod0V/evo0=
=DHn4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python and tests (mostly acceptance) patches 2020-03-17
# gpg: Signature made Wed 18 Mar 2020 00:16:03 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/docker: make "buildah bud" output similar to "docker build"
tests/docker: add CentOS 8 Dockerfile
Acceptance tests: add make targets to download images
Acceptance test: add "boot_linux" tests
Acceptance tests: introduce BUILD_DIR and SOURCE_DIR
python/qemu/qmp.py: QMP debug with VM label
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The newly introduced "boot linux" tests make use of Linux images that
are larger than usual, and fall into what Avocado calls "vmimages",
and can be referred to by name, version and architecture.
The images can be downloaded automatically during the test. But, to
make for more reliable test results, this introduces a target that
will download the vmimages for the architectures that have been
configured and are available for the currently used distro (Fedora
31).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Cleber: implemented suggestions by Alex, download message, check-venv target]
Message-Id: <20200317141654.29355-4-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Unlike regular feature flags, the new special feature flag
"deprecated" is recognized by the QAPI generator. For now, it's only
permitted with commands, events, and struct members. It will be put
to use shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc typo fixed]
