Several BlockDriverState fields are not being reinitialized across
bdrv_close()/bdrv_open(). Make sure they are reset to their default
values.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several block drivers set bs->read_only in .bdrv_open() but
block.c:bdrv_open_common() clobbers its value. Additionally, QED uses
bdrv_is_read_only() in .bdrv_open() to decide whether to perform
consistency checks.
The correct ordering is to initialize bs->read_only from the open flags
before calling .bdrv_open(). This way block drivers can override it if
necessary and can use bdrv_is_read_only() in .bdrv_open().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using bdrv_close() is not enough to free a BlockDriverState. Since we
explicitly create it with bdrv_new(), use bdrv_delete() to close and
delete it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_cache_flush failed, s->lock will not be unlock.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a short description of how to specify a NBD device
to QEMU.
Syntax for both TCP and Unix Domain Sockets are provided as well
as examples.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Data we read from the disk isn't necessarily null terminated and may not
contain the string we're looking for. The code needs to be a bit more careful
here.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tmp_filename was used outside the block it was defined in, i.e. after it went
out of scope. Move its declaration to the top level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An entry in the VDI block map will hold an offset to the actual block if
the block is allocated, or one of two specially-interpreted values if
not allocated. Using VirtualBox terminology, value VDI_IMAGE_BLOCK_FREE
(0xffffffff) represents a never-allocated block (semantically arbitrary
content). VDI_IMAGE_BLOCK_ZERO (0xfffffffe) represents a "discarded"
block (semantically zero-filled). block/vdi knows only about
VDI_IMAGE_BLOCK_FREE. Teach it about VDI_IMAGE_BLOCK_ZERO.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new section for device URL syntax for special files and describe the iSCSI
URL with examples
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This provides built-in support for iSCSI to QEMU.
This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.
This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
git://github.com/sahlberg/libiscsi.git
The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
qemu against libiscsi.
* --enable-libiscsi
Force a build against libiscsi. If libiscsi is not available
the build will fail.
* --disable-libiscsi
Do not link against libiscsi, even if it is available.
When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.
You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all. However, this is a very simple operation
so we're better off doing this inline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three. In
addition, clear_float_exceptions expands inline to a single byte store.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Load, store, and "create destination". This version attempts to
change the behaviour of the translator as little as possible. We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that. This will eventually allow a change in
representation of the fprs.
Change the name of the cpu_fpr array to make certain that all
instances are converted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Before the next patch, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make [su]div{,cc} helpers take a parameter for CPUState instead
of relying on global env. Move the functions to helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make softint op helpers and Leon cache irq manager take a parameter
for CPUState instead of relying on global env. Move the functions
to int{32,64}_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make CWP and PSTATE helpers take a parameter for CPUState instead
of relying on global env. Remove wrapper functions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
stdint.h defines the POSIX data types and is needed
for MinGW-w64 (and maybe other hosts).
v2: Instead of adding stdint.h directly, qemu-common.h is now
included and duplicate include statements were removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
g_malloc0 needs g_free instead of free.
While fixing this, I also replaced g_malloc0 by g_new0
as was suggested by Stuart Brady.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The MinGW-w64 gcc complains about wrong parameters for
gen_helper_fpadd16_s and three other functions.
gen_helper_fpadd16_s is declared like this (hidden in lots of macros):
static inline void
gen_helper_fpadd16s(TCGv_i32 retval, TCGv_ptr arg1,
TCGv_i32 arg2, TCGv_i32 arg3);
So it looks like cpu_env should be the 2nd parameter.
Please review this patch as I have no environment to test it
(maybe the 1st parameter should be cpu_dst?).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Windows 7 may use the same stream number for input and output.
Current code will confuse streams.
Changes since v1:
- keep running_compat[] for migration version 1
- add running_real[] for migration version 2
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Windows 7 may use the same stream number for input and output.
That will result in lot of garbage on playback.
The hardcoded value of 4 needs to be in sync with GCAP streams
description and IN/OUT registers.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
