Remove the useless is_external argument. Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it. This lets us remove stubs/iohandler.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU
protocol feature and VHOST_USER_NET_SET_MTU request so
that the backend gets notified of the user defined host
MTU.
If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK,
QEMU assumes MTU is valid if success is returned.
Vhost-net driver sends this request through a new
vhost_net_set_mtu vhost_ops entry.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add procedure for fast drop of queued packets, acting like
pop and push without mapping the buffers into memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio queue suitable for push operation from qemu
after vhost was stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bring virtio queue to correct internal state for host-to-guest
operations when vhost is temporary stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest can specify physical addresses that correspond
to any memory region, but it shouldn't be able to change ROM.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.
Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Common practice with sensitive information (key material, passwords,
etc). Prevents sensitive information from being exposed by accident later in
coredumps, memory disclosure bugs when heap memory is reused, etc.
Sensitive information is sometimes also held in mlocked pages to prevent
it being swapped to disk but that's not being done here.
Let's zeroize the memory of CryptoDevBackendSymOpInfo structure pointed
for key material security.
[Thanks to Stefan for help with crafting the commit message]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After resolving the relationship with cryptodev backend,
the virtio crypto device supports hotplug now.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the check condition for cryptodev device in order
to avoid one cryptodev device is used by multiple
virtio crypto devices.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must assure each virtio crypto pci device has
an vaild cryptodev backend object.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ready flag should be set by the children of
cryptodev backend interface. Warp the setter/getter
functions for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property is used to Tag the cryptodev backend
is used by virtio-crypto or not. Making cryptodev
can't be hot unplugged when it's in use. Cleanup
resources when cryptodev is finalized.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some modes of cipher algorithms, the length of destination data
maybe larger then source data, such as ciphertext stealing (CTS).
For symmetric algorithms, the length of ciphertext is definitly
equal to the plaintext for each crypto operation. So we should
use the src_len instead of dst_len avoid to pass the incorrect
cryptographical results to the frontend driver.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because the 'size_t' type is 4 bytes in 32-bit platform, which
is the same with 'int'. It's easy to make 'max_len' to zero when
integer overflow and then cause heap overflow if 'max_len' is zero.
Using uint_64 instead of size_t to avoid the integer overflow.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVFkHAAoJECgfDbjSjVRpdc0H/1JMgQn0/J6vjKfeRY7720y8
/Bihf4gjKN2bPtu6pTGY1KQBvK76ShyvZZBFCa5bf8a4V9HP4BgSQ8mQ7ZUURzJJ
OslYbSzK1R2LiWJ40e9xdFOoKWKB3lK1lBF/Xb8QPZPoJ0D50Fo2xpymt4hZFdkF
oSnXxHmYoKMsMmmqJZd3aaqyffFLYGmcm1dbJOxninwu/nBzOBY2SQmmaaacSoGn
3D5988i6OcD1qbavfk4rNCQV4avJA+H7c/FmXH3WarPE8M9/jgnAaUDdknFicUA8
hGwMsLrO/7sMnMYtSQIxWg743LhrAm93HCr2u/TgLzhYbPydmLCpup5eAWj+jvo=
=nN2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a performance optimization to eliminate vmexits during polling.
It also avoids spurious ioeventfd processing after polling ends.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Polling should disable virtqueue notifications but that requires nested
virtio_queue_set_notification() calls. Turn vq->notification into a
counter so it is possible to do nesting.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an AioContext poll handler to detect new virtqueue buffers without
waiting for a guest->host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because guest mask notifier cannot be used in vhost-user mode, a boolean
flag "use_guest_notifier_mask" was added in commit 5669655aaf to disable
the use of guest mask notifier under virtio-pci. However this flag wasn't
checked in other virtio devices, such as virtio-mmio. In our tests, it
caused assertion error under "vhost-user + virtio-mmio". This patch
addresses this problem by adding a check before guest_notifier_mask is
called.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a cross-version migration regression introduced
by commit d1b4259f ("virtio-bus: Plug devices after features are
negotiated").
The problem is encountered when host's vhost backend does not support
VIRTIO_F_VERSION_1, and migration is initiated from a v2.7 or prior
machine with virtio-pci modern capabilities enabled to a v2.8 machine.
In this case, modern capabilities get exposed to the guest by the source,
whereas the target will detect version 1 is not supported so will only
expose legacy capabilities.
The problem is fixed by introducing a new "x-ignore-backend-features"
property, which is set in v2.7 and prior compatibility modes. Doing this,
v2.7 machine keeps its broken behaviour (enabling modern while version
is not supported), and newer machines will behave correctly.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-id: 20161214163035.3297-1-maxime.coquelin@redhat.com
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Though crypto_cfg.reserve is an unused field, let me
initialize the structure in order to make coverity happy.
*** CID 1365923: Uninitialized variables (UNINIT)
/hw/virtio/virtio-crypto.c: 851 in virtio_crypto_get_config()
845 stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
846 stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
847 stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
848 stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
849 stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
850
>>> CID 1365923: Uninitialized variables (UNINIT)
>>> Using uninitialized value "crypto_cfg". Field "crypto_cfg.reserve"
is uninitialized when calling "memcpy".
[Note: The source code implementation of the function
has been overridden by a builtin model.]
851 memcpy(config, &crypto_cfg, c->config_size);
852 }
853
Rported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent refactoring of virtio notifiers [1], more specifically
the patch ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.
When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
Aborted
This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must check for new virtqueue buffers after re-enabling notifications.
This prevents the race condition where the guest added buffers just
after we stopped popping the virtqueue but before we re-enabled
notifications.
I think the virtio-crypto code was based on virtio-net but this crucial
detail was missed. virtio-net does not have the race condition because
it processes the virtqueue one more time after re-enabling
notifications.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
These are not used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The legacy vring layout is not used anymore as we use the separate
mappings even for legacy devices.
This patch simply removes it.
This also fixes a bug with virtio 1 devices when the vring descriptor table
is mapped at a higher address than the used vring because the following
function may return an insanely great value:
hwaddr virtio_queue_get_ring_size(VirtIODevice *vdev, int n)
{
return vdev->vq[n].vring.used - vdev->vq[n].vring.desc +
virtio_queue_get_used_size(vdev, n);
}
and the mapping fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With virtio 1, the vring layout is split in 3 separate regions of
contiguous memory for the descriptor table, the available ring and the
used ring, as opposed with legacy virtio which uses a single region.
In case of memory re-mapping, the code ensures it doesn't affect the
vring mapping. This is done in vhost_verify_ring_mappings() which assumes
the device is legacy.
This patch changes vhost_verify_ring_mappings() to check the mappings of
each part of the vring separately.
This works for legacy mappings as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 31190ed7 added a migration blocker in vhost_dev_init() to
check if memfd would succeed. It is better if this blocker first
checks if vhost backend requires shared log. This will avoid a
situation where a blocker is added inappropriately (e.g. shared
log allocation fails when vhost backend doesn't support it).
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently the virtio-crypto device hasn't supported
hotpluggable and live migration well. Let's tag it
as not hotpluggable and migration actively and reopen
them once we support them well.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function does not fully initialize the returned VirtQueueElement and should
be used only internally from the virtio module.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make crypto operations are executed asynchronously,
so that other QEMU threads and monitor couldn't
be blocked at the virtqueue handling context.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use an opaque point to the VirtIOCryptoReq which
can support different packets based on different
algorithms.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduces VirtIOCryptoReq structure to store
crypto request so that we can easily support
asynchronous crypto operation in the future.
At present, we only support cipher and algorithm
chaining.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Realize the symmetric algorithm control queue handler,
including plain cipher and chainning algorithms.
Currently the control queue is used to create and
close session for symmetric algorithm.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the capacity of algorithms supported by
virtio crypto device to the frontend driver using
pci configuration space.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds virtio-crypto-pci, which is the pci proxy for the virtio
crypto device.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the virtio crypto realization, I'll
finish the core code in the following patches. The
thoughts came from virtio net realization.
For more information see:
http://qemu-project.org/Features/VirtioCrypto
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is only called from virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that there is not anymore a switch from the generic ioeventfd handler
to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is
always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd
does nothing in this case. Move the invocation to vhost.c, which is the
only place that needs it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
