Apple's Hypervisor.Framework forwards cache operations as MMIO traps
into user space. For MMIO however, these have no meaning: There is no
cache attached to them.
So let's just treat cache data exits as nops.
This fixes OpenBSD booting as guest.
Reported-by: AJ Barris <AwlsomeAlex@github.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reference: https://github.com/utmapp/UTM/issues/3197
Message-Id: <20211026071241.74889-1-agraf@csgraf.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the mask is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The immediate value used for comparison is constant and
read-only. Move it to the constant pool. This frees a
TCG temporary for unsigned saturation opcodes.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When using a constant variable, we can replace the store_cpu_field()
call by store_cpu_field_constant() which avoid using TCG temporaries.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to the store_cpu_field() helper which takes a TCG
temporary, store its value to the CPUState, introduce the
store_cpu_field_constant() helper which store a constant to
CPUState (without using any TCG temporary).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid using a TCG temporary for a read-only constant.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029231834.2476117-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cortex-M CPUs with MVE should advertise this fact to gdb, using the
org.gnu.gdb.arm.m-profile-mve XML feature, which defines the VPR
register. Presence of this feature also tells gdb to create
pseudo-registers Q0..Q7, so we do not need to tell gdb about them
separately.
Note that unless you have a very recent GDB that includes this fix:
http://patches-tcwg.linaro.org/patch/58133/ gdb will mis-print the
individual fields of the VPR register as zero (but showing the whole
thing as hex, eg with "print /x $vpr" will give the correct value).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211101160814.5103-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This command was turned into a no-op four years ago in
commit 0c8465440d
Author: Peter Xu <peterx@redhat.com>
Date: Fri Dec 29 15:31:04 2017 +0800
hmp: obsolete "info ioapic"
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
FCR0_HAS2008 flag has been enabled in commit ba5c79f262
("target-mips: indicate presence of IEEE 754-2008 FPU in
R6/R5+MSA CPUs"), so remove the obsolete FIXME comment.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028212103.2126176-1-f4bug@amsat.org>
When using the Loongson-3A4000 CPU, the MSAIR is returned with a
zero value (because unimplemented). Checking on real hardware,
this value appears incorrect:
$ cat /proc/cpuinfo
system type : generic-loongson-machine
machine : loongson,generic
cpu model : Loongson-3 V0.4 FPU V0.1
model name : Loongson-3A R4 (Loongson-3A4000) @ 1800MHz
isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented : vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
...
Checking the CFCMSA opcode result with gdb we get 0x60140:
Breakpoint 1, 0x00000001200037c4 in main ()
1: x/i $pc
=> 0x1200037c4 <main+52>: cfcmsa v0,msa_ir
(gdb) si
0x00000001200037c8 in main ()
(gdb) i r v0
v0: 0x60140
MSAIR bits 17 and 18 are "reserved" per the spec revision 1.12,
so mask them out, and set MSAIR=0x0140 for the Loongson-3A4000
CPU model added in commit af868995e1.
Cc: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211026180920.1085516-1-f4bug@amsat.org>
Only the MSA generic opcode was overlapping with the other
instructions. Since the previous commit removed it, we can
now remove the overlap group. The decodetree script forces
us to re-indent the opcodes.
Diff trivial to review using `git-diff --ignore-all-space`.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-32-f4bug@amsat.org>
All opcodes have been converted to decodetree. The generic
MSA handler is now pointless, remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-31-f4bug@amsat.org>
Convert the CTCMSA (Copy To Control MSA register) opcode
to decodetree. Since it overlaps with the SLDI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-30-f4bug@amsat.org>
Convert the CFCMSA (Copy From Control MSA register) opcode
to decodetree. Since it overlaps with the SPLATI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-29-f4bug@amsat.org>
Convert the MOVE.V opcode (Vector Move) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-28-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-27-f4bug@amsat.org>
Convert the COPY_U opcode (Element Copy to GPR Unsigned) to
decodetree.
Since the 'n' field is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-26-f4bug@amsat.org>
Convert instructions with an immediate element index
and data format df/n to decodetree.
Since the 'data format' and 'n' fields are constant values,
use tcg_constant_i32() instead of a TCG temporaries.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-25-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-24-f4bug@amsat.org>
Convert BINSL (Vector Bit Insert Left) and BINSR (Vector Bit
Insert Right) opcodes to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-23-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Per the Encoding of Operation Field for 3R Instruction Format'
(Table 3.25), these instructions are not defined for the BYTE
format. Therefore the TRANS_DF_iii_b() macro returns 'false'
in that case, because no such instruction is decoded.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-22-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Note, the format definition could be named @3rf_b (for
3R with a df field BYTE-based) but since the instruction
class is named '3R', we simply call the format @3r to
ease reviewing the msa.decode file.
However we directly call the trans_msa_3rf() function,
which handles the BYTE-based df field.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-21-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-20-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-19-f4bug@amsat.org>
Convert 3-register instructions with implicit data formats
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-18-f4bug@amsat.org>
Convert 2-register operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-17-f4bug@amsat.org>
Convert the FILL opcode (Vector Fill from GPR) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-16-f4bug@amsat.org>
Convert 2-register floating-point operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-15-f4bug@amsat.org>
Convert load/store instructions to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-14-f4bug@amsat.org>
Convert instructions with an 8-bit immediate value and either
implicit data format or data format df to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-13-f4bug@amsat.org>
Convert the SHF opcode (Immediate Set Shuffle Elements) to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-12-f4bug@amsat.org>
Convert instructions with an immediate bit index and
data format df/m to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-11-f4bug@amsat.org>
Convert instructions with a 5-bit immediate value to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-10-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-9-f4bug@amsat.org>
This 'shift amount' format is not always 16-bit, so name it
generically as 'sa'. This will help to unify the various
arg_msa decodetree generated structures.
Rename the @bz format -> @bz_v (specific @bz with df=3) and
@bz_df -> @bz (generic @bz).
Since we modify &msa_bz, re-align its arguments, so the other
structures added in the following commits stay visually aligned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-8-f4bug@amsat.org>
Replace magic DataFormat value by the corresponding
enum from CPUMIPSMSADataFormat.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-7-f4bug@amsat.org>
Have check_msa_access() return a boolean value so we can
return early if MSA is not enabled (the instruction got
decoded properly, but we raised an exception).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-6-f4bug@amsat.org>
The dup_const() helper makes the code easier to follow, use it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-5-f4bug@amsat.org>
While the first 'off' variable assignment is unused, it helps
to better understand the code logic. Move the assignation where
it would have been used so it is easier to compare the MSA
registers based on FPU ones versus the MSA specific registers.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211023214803.522078-34-f4bug@amsat.org>
The result of the 'Vector Multiply and Subtract' opcode is
incorrect with Byte vectors. Probably due to a copy/paste error,
commit 5f148a0232 mistakenly used the $wt (target register)
instead of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 5f148a0232 ("target/mips: msa: Split helpers for MSUBV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-3-f4bug@amsat.org>
The result of the 'Vector Multiply and Add' opcode is incorrect
with Byte vectors. Probably due to a copy/paste error, commit
7a7a162add mistakenly used the $wt (target register) instead
of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 7a7a162add ("target/mips: msa: Split helpers for MADDV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-2-f4bug@amsat.org>
We ought to have been recording the virtual address for reporting
to the guest trap handler. Move the function to mmu_helper.c, so
that we can re-use code shared with get_physical_address_data.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The printf should have been qemu_log_mask, the parameters
themselves no longer compile, and because this is placed
before unwinding the PC is actively wrong.
We get better (and correct) logging on the other side of
raising the exception, in sparc_cpu_do_interrupt.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We ought to have been recording the virtual address for reporting
to the guest trap handler.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For s390x, the only unaligned accesses that are signaled are atomic,
and we don't actually want to raise SIGBUS for those, but instead
raise a SPECIFICATION error, which the kernel will report as SIGILL.
Split out a do_unaligned_access function to share between the user-only
s390x_cpu_record_sigbus and the sysemu s390x_do_unaligned_access.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is not used by, nor required by, user-only.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We ought to have been recording the virtual address for reporting
to the guest trap handler.
Cc: qemu-ppc@nongnu.org
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By doing this while sending the exception, we will have already
done the unwinding, which makes the ppc_cpu_do_unaligned_access
code a bit cleaner.
Update the comment about the expected instruction format.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel will fix up unaligned accesses, so emulate that
by allowing unaligned accesses to succeed.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because of the complexity of setting ESR, re-use the existing
arm_cpu_do_unaligned_access function. This means we have to
handle the exception ourselves in cpu_loop, transforming it
to the appropriate signal.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record trap_arg{0,1,2} for the linux-user signal frame.
Raise SIGBUS directly from cpu_loop_exit_sigbus, which means
we can remove the code for EXCP_UNALIGN in cpu_loop.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for xtensa linux-user.
Remove the code from cpu_loop that raised SIGSEGV.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for sparc linux-user.
This makes all of the code in mmu_helper.c sysemu only, so remove
the ifdefs and move the file to sparc_softmmu_ss. Remove the code
from cpu_loop that handled TT_DFAULT and TT_TFAULT.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for sh4 linux-user.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the masking of the address from cpu_loop into
s390_cpu_record_sigsegv -- this is governed by hw, not linux.
This does mean we have to raise our own exception, rather
than return to the fallback.
Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING.
Use the appropriate si_code for each in cpu_loop.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not sure why the user-only code wasn't rewritten to use
probe_access_flags at the same time that the sysemu code
was converted. For the purpose of user-only, this is an
exact replacement.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for riscv linux-user.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record DAR, DSISR, and exception_index. That last means
that we must exit to cpu_loop ourselves, instead of letting
exception_index being overwritten.
This is exactly what the user-mode ppc_cpu_tlb_fill does,
so simply rename it as ppc_cpu_record_sigsegv.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient for
openrisc linux-user.
This makes all of the code in mmu.c sysemu only, so remove
the ifdefs and move the file to openrisc_softmmu_ss.
Remove the code from cpu_loop that handled EXCP_DPF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because the linux-user kuser page handling is currently implemented
by detecting magic addresses in the unnamed 0xaa trap, we cannot
simply remove nios2_cpu_tlb_fill and rely on the fallback code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for mips linux-user.
This means we can remove tcg/user/tlb_helper.c entirely.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for microblaze linux-user.
Remove the code from cpu_loop that handled the unnamed 0xaa exception.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for m68k linux-user.
Remove the code from cpu_loop that handled EXCP_ACCESS.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record cr2, error_code, and exception_index. That last means
that we must exit to cpu_loop ourselves, instead of letting
exception_index being overwritten.
Use the maperr parameter to properly set PG_ERROR_P_MASK.
Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for hppa linux-user.
Remove the code from cpu_loop that raised SIGSEGV.
This makes all of the code in mem_helper.c sysemu only,
so remove the ifdefs and move the file to hppa_softmmu_ss.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for hexagon linux-user.
Remove the code from cpu_loop that raises SIGSEGV.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for cris linux-user.
Remove the code from cpu_loop that handled the unnamed 0xaa exception.
This makes all of the code in helper.c sysemu only, so remove the
ifdefs and move the file to cris_softmmu_ss.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because of the complexity of setting ESR, continue to use
arm_deliver_fault. This means we cannot remove the code
within cpu_loop that decodes EXCP_DATA_ABORT and
EXCP_PREFETCH_ABORT.
But using the new hook means that we don't have to do the
page_get_flags check manually, and we'll be able to restrict
the tlb_fill hook to sysemu later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new os interface for raising the exception,
rather than calling arm_cpu_tlb_fill directly.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record trap_arg{0,1,2} for the linux-user signal frame.
Fill in the stores to trap_arg{1,2} that were missing
from the previous user-only alpha_cpu_tlb_fill function.
Use maperr to simplify computation of trap_arg1.
Remove the code for EXCP_MMFAULT from cpu_loop, as
that part is now handled by cpu_loop_exit_sigsegv.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The named function no longer exists.
Refer to host_signal_handler instead.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I noticed -cpu help printing enough trailing spaces to make the output
at least 84 characters wide. Looks ugly unless the terminal is wider.
Ugly or not, trailing spaces are stupid.
The culprit is this line in x86_cpu_list_entry():
qemu_printf("x86 %-20s %-58s\n", name, desc);
This prints a string with minimum field left-justified right before a
newline. Change it to
qemu_printf("x86 %-20s %s\n", name, desc);
which avoids the trailing spaces and is simpler to boot.
A search for the pattern with "git-grep -E '%-[0-9]+s\\n'" found a few
more instances. Change them similarly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20211009152401.2982862-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Because core-capability releated features are model-specific and KVM
won't support it, remove the core-capability in CPU model to avoid the
warning message.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210827064818.4698-3-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Use a shared PLIC config helper function
- Fixup the OpenTitan PLIC configuration
- Add support for the experimental J extension
- Update the fmin/fmax handling
- Fixup VS interrupt forwarding
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmF7nNMACgkQIeENKd+X
cFQhegf/U3L/SOPCU5uICn67TZHRUeyzH1ebw6p9hHkGbhUq2hLsg2N5yqIPusbM
Y/uouTHciRXqSNiqNle24wvdORxBPdwkE+hplyU3os3wvIelU+8HAhBIrFsJPOVV
G3kuMoc7rKPhjbwSjSIQcrfDA52pT3wQJUfza3bvVZ1VoI4jb+I2yopRLVq7S0qA
d/Hl5QoUC/CcSrpubDp8AtN/lQWnmFlFq4vfbaFg/NJK3+lCR1JWc8RxfRJ3Y9T0
V3AZP8m8+dTubjoMAbNkuIlRLKtvCfa+qFe9WFwxLKul6sbM/qONVDFQJAiHczyG
Pjkg77ZXRXvu1McMN/rF4tz5k9dQOA==
=5EIe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211029-1' into staging
Fifth RISC-V PR for QEMU 6.2
- Use a shared PLIC config helper function
- Fixup the OpenTitan PLIC configuration
- Add support for the experimental J extension
- Update the fmin/fmax handling
- Fixup VS interrupt forwarding
# gpg: Signature made Fri 29 Oct 2021 12:03:47 AM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
* remotes/alistair23/tags/pull-riscv-to-apply-20211029-1:
target/riscv: change the api for RVF/RVD fmin/fmax
softfloat: add APIs to handle alternative sNaN propagation for fmax/fmin
target/riscv: remove force HS exception
target/riscv: fix VS interrupts forwarding to HS
target/riscv: Allow experimental J-ext to be turned on
target/riscv: Implement address masking functions required for RISC-V Pointer Masking extension
target/riscv: Support pointer masking for RISC-V for i/c/f/d/a types of instructions
target/riscv: Print new PM CSRs in QEMU logs
target/riscv: Add J extension state description
target/riscv: Support CSRs required for RISC-V PM extension except for the h-mode
target/riscv: Add CSR defines for RISC-V PM extension
target/riscv: Add J-extension into RISC-V
hw/riscv: opentitan: Fixup the PLIC context addresses
hw/riscv: virt: Use the PLIC config helper function
hw/riscv: microchip_pfsoc: Use the PLIC config helper function
hw/riscv: sifive_u: Use the PLIC config helper function
hw/riscv: boot: Add a PLIC config string function
hw/riscv: virt: Don't use a macro for the PLIC configuration
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes for 128/64 division.
Cleanup tcg/optimize.c
Optimize redundant sign extensions
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmF7cygdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8mAggAtHuBHs018O6k9dSl
5JJReghwMvsapV5w3MTfN72UR8xTVyC0+dk+P3hv2qJMx/Oofb2Z0m9e9n/iwWxJ
kktySWUuHXE/Hty4fVSEfUdx0C4FBF49I1PllzzjS8gR2gHbEoHXc2doJVCXCW0C
BSKzWERZjVdHWT2GeBtSV0n4vOoiHoBaa5ZcH7VVXVOlpT2iu8Tn3RlVELA1h3pY
NeDLCONWNAXHDQfM+63glLDTZ7eMZ8deOcLgJAiYDA2XVegYGeTZuqdBT3SiTno+
ts4D5aBkmy8yinCcJQktd3alsM1cwYlco0U/x8+JEvNqzWmLzsRpox7g6+rrpe+d
KhZ7Ww==
=UEO3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211028' into staging
Improvements to qemu/int128
Fixes for 128/64 division.
Cleanup tcg/optimize.c
Optimize redundant sign extensions
# gpg: Signature made Thu 28 Oct 2021 09:06:00 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-tcg-20211028: (60 commits)
softmmu: fix for "after access" watchpoints
softmmu: remove useless condition in watchpoint check
softmmu: fix watchpoint processing in icount mode
tcg/optimize: Propagate sign info for shifting
tcg/optimize: Propagate sign info for bit counting
tcg/optimize: Propagate sign info for setcond
tcg/optimize: Propagate sign info for logical operations
tcg/optimize: Optimize sign extensions
tcg/optimize: Use fold_xx_to_i for rem
tcg/optimize: Use fold_xi_to_x for div
tcg/optimize: Use fold_xi_to_x for mul
tcg/optimize: Use fold_xx_to_i for orc
tcg/optimize: Stop forcing z_mask to "garbage" for 32-bit values
tcg: Extend call args using the correct opcodes
tcg/optimize: Sink commutative operand swapping into fold functions
tcg/optimize: Expand fold_addsub2_i32 to 64-bit ops
tcg/optimize: Expand fold_mulu2_i32 to all 4-arg multiplies
tcg/optimize: Split out fold_masks
tcg/optimize: Split out fold_ix_to_i
tcg/optimize: Split out fold_xi_to_x
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The sNaN propagation behavior has been changed since cd20cee7 in
https://github.com/riscv/riscv-isa-manual.
In Priv spec v1.10, RVF is v2.0. fmin.s and fmax.s are implemented with
IEEE 754-2008 minNum and maxNum operations.
In Priv spec v1.11, RVF is v2.2. fmin.s and fmax.s are amended to
implement IEEE 754-2019 minimumNumber and maximumNumber operations.
Therefore, to prevent the risk of having too many version variables.
Instead of introducing an extra *fext_ver* variable, we tie RVF version
to Priv version. Though it's not completely accurate but is close enough.
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211021160847.2748577-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to "force an hs exception" as the current privilege
level, the state of the global ie and of the delegation registers should
be enough to route the interrupt to the appropriate privilege level in
riscv_cpu_do_interrupt. The is true for both asynchronous and
synchronous exceptions, specifically, guest page faults which must be
hardwired to zero hedeleg. As such the hs_force_except mechanism can be
removed.
Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211026145126.11025-3-josemartins90@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
VS interrupts (2, 6, 10) were not correctly forwarded to hs-mode when
not delegated in hideleg (which was not being taken into account). This
was mainly because hs level sie was not always considered enabled when
it should. The spec states that "Interrupts for higher-privilege modes,
y>x, are always globally enabled regardless of the setting of the global
yIE bit for the higher-privilege mode." and also "For purposes of
interrupt global enables, HS-mode is considered more privileged than
VS-mode, and VS-mode is considered more privileged than VU-mode". Also,
vs-level interrupts were not being taken into account unless V=1, but
should be unless delegated.
Finally, there is no need for a special case for to handle vs interrupts
as the current privilege level, the state of the global ie and of the
delegation registers should be enough to route all interrupts to the
appropriate privilege level in riscv_cpu_do_interrupt.
Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211026145126.11025-2-josemartins90@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead
of hex_gpr[HEX_REG_USR].
Then, we need code to mark the instructions that can set implicitly
set USR
- Macros added to hex_common.py
- A_FPOP added in translate.c
Test case added in tests/tcg/hexagon/overflow.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Change additional tcg_const_tl to tcg_constant_tl
Note that gen_pred_cancal had slot_mask initialized with tcg_const_tl.
However, it is not constant throughout, so we initialize it with
tcg_temp_new and replace the first use with the constant value.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
These will be used to implement new decimal floating point
instructions from Power ISA 3.1.
The remainder is now returned directly by divu128/divs128,
freeing up phigh to receive the high 64 bits of the quotient.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-4-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for changing the divu128/divs128 implementations
to allow for quotients larger than 64 bits, move the div-by-zero
and overflow checks to the callers.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211025191154.350831-2-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 12b6e9b27d ("disas: Clean up CPUDebug initialization")
the disassemble_info->bfd_endian enum is set for all targets in
target_disas(). We can directly call print_insn_nios2() and simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210807110939.95853-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The position of this read-only field is dependent on the current xlen.
Rather than having to compute that difference in many places, compute
it only on read.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the official debug read interface to the csrs,
rather than referencing the env slots directly.
Put the list of csrs to dump into a table.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Most shift instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The count zeros instructions require a separate implementation
for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When target_long is 64-bit, we still want a 32-bit bswap for rev8.
Since this opcode is specific to RV32, we need not conditionalize.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The multiply high-part instructions require a separate
implementation for RV32 when TARGET_LONG_BITS == 64.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation for RV128, consider more than just "w" for
operand size modification. This will be used for the "d"
insns from RV128 as well.
Rename oper_len to get_olen to better match get_xlen.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation for RV128, replace a simple predicate
with a more versatile test.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're currently assuming SEW <= 3, and the "else" from
the SEW == 3 must be less. Use a switch and explicitly
bound both SEW and SEQ for all cases.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the same REQUIRE_64BIT check that we use elsewhere,
rather than open-coding the use of is_32bit.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Begin adding support for switching XLEN at runtime. Extract the
effective XLEN from MISA and MSTATUS and store for use during translation.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.
Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hw representation of misa.mxl is at the high bits of the
misa csr. Representing this in the same way inside QEMU
results in overly complex code trying to check that field.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the MXL_RV* defines to enumerators.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-3-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the function to cpu_helper.c, as it is large and growing.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Organise the CPU properties so that standard extensions come first
then followed by experimental extensions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: b6598570f60c5ee7f402be56d837bb44b289cc4d.1634531504.git.alistair.francis@wdc.com
Since commit 1a9540d1f1
("target/riscv: Drop support for ISA spec version 1.09.1")
these definitions are unused, remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: f4d8a7a035f39c0a35d44c1e371c5c99cc2fa15a.1634531504.git.alistair.francis@wdc.com
TB_FLAGS mem_idx bits was extended from 2 bits to 3 bits in
commit: c445593, but other TB_FLAGS bits for rvv and rvh were
not shift as well so these bits may overlap with each other when
rvv is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211015074627.3957162-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The earlier implementation fell into a corner case for bytes that were
0x01, giving a wrong result (but not affecting our application test
cases for strings, as an ASCII value 0x01 is rare in those...).
This changes the algorithm to:
1. Mask out the high-bit of each bytes (so that each byte is <= 127).
2. Add 127 to each byte (i.e. if the low 7 bits are not 0, this will overflow
into the highest bit of each byte).
3. Bitwise-or the original value back in (to cover those cases where the
source byte was exactly 128) to saturate the high-bit.
4. Shift-and-mask (implemented as a mask-and-shift) to extract the MSB of
each byte into its LSB.
5. Multiply with 0xff to fan out the LSB to all bits of each byte.
Fixes: d7a4fcb034 ("target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reported-by: Vincent Palatin <vpalatin@rivosinc.com>
Tested-by: Vincent Palatin <vpalatin@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211013184125.2010897-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ensure the columns for all of the register names and values line up.
No functional change, just a minor tweak to the output.
Signed-off-by: Travis Geiselbrecht <travisg@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211009055019.545153-1-travisg@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
oprsz and maxsz are passed with the same value in commit: eee2d61e20.
However, vmv.v.v was missed in that commit and should pass the same
value as well in its tcg_gen_gvec_2_ptr() call.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211007081803.1705656-1-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Problem state needs to be able to read and write the PMU counters,
otherwise it won't be aware of any sampling result that the PMU produces
after a Perf run.
This patch does that in a similar fashion as already done in the
previous patches. PMCs 5 and 6 have a special condition, aside from the
constraints that are common with PMCs 1-4, where they are not part of the
PMU if MMCR0_PMCC is 0b11.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-5-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similar to the previous patch, let's add problem state read/write access to
the MMCR2 SPR, which is also a group A PMU SPR that needs to be filtered
to be read/written by userspace.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Userspace need access to PMU SPRs to be able to operate the PMU. One of
such SPRs is MMCR0.
MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU
register. This class of registers has common read/write rules that are
governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem
state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are
readable/writable in this case.
This patch exposes MMCR0 to userspace by doing the following:
- two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(),
are added to be used as problem state read/write callbacks of UMMCR0.
Both callbacks filters the amount of bits userspace is able to
read/write by using a MMCR0_UREG_MASK;
- problem state access control is done by the spr_groupA_read_allowed()
and spr_groupA_write_allowed() helpers. These helpers will read the
current PMCC bits from DisasContext and check whether the read/write
MMCR0 operation is valid or noti;
- to avoid putting exclusive PMU logic into the already loaded
translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that
will hold all the spr_read/spr_write functions of PMU registers.
The 'power8' name of this new file intends to hint about the proven
support of the PMU logic to be added. The code has been tested with the
IBM POWER chip family, POWER8 being the oldest version tested. This
doesn't mean that the PMU logic will break with any other PPC64 chip
that implements Book3s, but rather that we can't assert that it works
properly with any Book3s compliant chip.
CC: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're going to add PMU support for TCG PPC64 chips, based on IBM POWER8+
emulation and following PowerISA v3.1. This requires several PMU related
registers to be exposed to userspace (problem state). PowerISA v3.1
dictates that the PMCC bits of the MMCR0 register controls the level of
access of the PMU registers to problem state.
This patch start things off by exposing both PMCC bits to hflags,
allowing us to access them via DisasContext in the read/write callbacks
that we're going to add next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PowerISA says that mtmsr[d] "does not alter MSR[HV], MSR[S], MSR[ME], or
MSR[LE]", but the current code only filters the GPR-provided value if
L=1. This behavior caused some problems in FreeBSD, and a build option
was added to work around the issue [1], but it seems that the bug was
not reported in launchpad/gitlab. This patch address the issue in qemu,
so the option on FreeBSD should no longer be required.
[1] https://cgit.freebsd.org/src/commit/?id=4efb1ca7d2a44cfb33d7f9e18bd92f8d68dcfee0
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211015181940.197982-1-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can't read env->xer directly, as it does not contain some bits of
XER. Instead, we should have a callback that uses cpu_read_xer to read
the complete register.
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-5-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
env->xer doesn't hold some bits of XER, like OV and CA. To write the
complete register in the core dump we should read XER value with
cpu_read_xer.
Reported-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-4-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The value of XER is split in multiple fields of CPUPPCState, like
env->xer and env->so. To get/set the whole register from gdb, we should
use cpu_read_xer/cpu_write_xer.
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-3-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mask of the Byte-Reverse Halfword opcode is a read-only
constant. We can avoid using a TCG temporary by moving the
mask to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoid using TCG temporaries for the -1 and 8 constant values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d
("target-mips: Add ASE DSP accumulator instructions"), the
'v2_t' TCG temporary has never been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
While for the DEXTR_S.H opcode:
"The shift argument is provided in the instruction."
For the DEXTRV_S.H opcode we have:
"The five least-significant bits of register rs provide the
shift argument, interpreted as a five-bit unsigned integer;
the remaining bits in rs are ignored."
While 't1' contains the 'rs' register content (the shift value
for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H.
We can directly use the v1_t TCG register which already contains
this shift value.
Fixes: b53371ed5d ("target-mips: Add ASE DSP accumulator instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
The offset is constant and read-only: move it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
We already use sextract32(), use extract32() for completeness
instead of open-coding it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-7-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-6-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-5-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-4-f4bug@amsat.org>
Data Format is a 2-bit constant value.
Avoid using a TCG temporary by moving it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-3-f4bug@amsat.org>
Commits cbe50b9a8e ("target-mips: add MSA VEC/2R format instructions")
and 3bdeb68866 ("target-mips: add MSA 2RF format instructions") added
the MSA 2R/2RF instructions. However these instructions don't use any
target vector register, so remove the unused TCG temporaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003175743.3738710-2-f4bug@amsat.org>
Per the "MIPS Architecture Extension: nanoMIPS32 DSP TRM" rev 0.04,
MULT and MULTU opcodes:
The value of ac selects an accumulator numbered from 0 to 3.
When ac=0, this refers to the original HI/LO register pair of the
MIPS32 architecture.
In Release 6 of the MIPS Architecture, accumulators are eliminated
from MIPS32.
Ensure pre-Release 6 is restricted to HI/LO registers pair.
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 4")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically, which means
we don't need to do anything in the wrappers.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already set DISAS_NORETURN in generate_exception,
which makes the exit_tb unreachable.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reuse gen_debug_exception to handle architectural debug exceptions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per an ancient comment in mips_tr_translate_insn about the
expectations of gdb, when restarting the insn in a delay slot
we also re-execute the branch. Which means that we are
expected to execute two insns in this case.
This has been broken since 8b86d6d258, where we forced max_insns
to 1 while single-stepping. This resulted in an exit from the
translator loop after the branch but before the delay slot is
translated.
Increase the max_insns to 2 for this case. In addition, bypass
the end-of-page check, for when the branch itself ends the page.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were using singlestep_enabled as a proxy for whether
translator_use_goto_tb would always return false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
