Implement MSI support in APIC. Note that MSI and MMIO APIC registers
are at the same memory location, but actually not on the global bus: MSI
is on PCI bus, APIC is connected directly to the CPU. We map them on the
global bus at the same address which happens to work because MSI
registers are reserved in APIC MMIO and vice versa.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add functions implementing MSI-X support. First user will be virtio-pci.
Note that platform must set a flag to declare MSI supported: this
is a safety measure to avoid breaking platforms which should support
MSI-X but currently lack this in the interrupt controller emulation.
For PC this will be set by APIC.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add "cmask" table of constant register masks: if a bit is not writeable
and is set in cmask table, this bit is checked on load. An attempt to
load an image that would change such a register causes load to fail.
Use this table to make sure that load does not modify registers that
guest can not change (directly or indirectly).
Note: we can't just assume that read-only registers never change,
because the guest could change a register indirectly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add routines to manage PCI capability list. First user will be MSI-X.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add inline routines for convenient access to pci devices
with correct (little) endianness. Will be used by MSI-X support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change much of hw/pci to use symbolic constants and a table-driven
design: add a mask table with writable bits set and readonly bits unset.
Detect change by comparing original and new registers.
This makes it easy to support capabilities where read-only/writeable
bit layout differs between devices, depending on capabilities present.
As a result, writing a single byte in BAR registers now works as
it should. Writing to upper limit registers in the bridge
also works as it should. Code is also shorter.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Microblaze recently changed their ABI. The new is not backwards compatible
and there doesn't seem to be a way to distinguish old/new binaries.
Let's support the latest ABI for now and hope someone figures out a way to
hande both ABI's later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Access to the PVR SPR is normally forbidden from userspace apps. The
Linux kernel, however, fixes up reads in the appropriate trap handler.
To permit applications that read PVR to run on QEMU, then, we need to
implement the same handling of PVR reads.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Maximum alignment for Win32 is 16, so don't try
to set it to 32. Otherwise the compiler complains:
exec.c:102: warning: alignment of 'code_gen_prologue'
is greater than maximum object file alignment. Using 16
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
`sdl-config --cflags` defines main = SDL_main
on some platforms. One of these platforms is
Windows with mingw32.
For those platforms, the solution already developed
for __APPLE__ is now applied.
A compiler warning (missing return value) is fixed, too.
Maybe __APPLE__ no longer needs a separate check.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio-net needs this - for the same purpose that it currently uses the
return value from qemu_sendv_packet().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2.6.30 adds a new TUNSETSNDBUF ioctl() which allows a send buffer limit
for the tap device to be specified. When this limit is reached, a tap
write() will return EAGAIN and poll() will indicate the fd isn't
writable.
This allows people to tune their setups so as to avoid e.g. UDP packet
loss when the sending application in the guest out-runs the NIC in the
host.
There is no obviously sensible default setting - a suitable value
depends mostly on the capabilities of the physical NIC through which the
packets are being sent.
Also, note that when using a bridge with netfilter enabled, we currently
never get EAGAIN because netfilter causes the packet to be immediately
orphaned. Set /proc/sys/net/bridge/bridge nf-call-iptables to zero to
disable this behaviour.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
net_tap_fd_init() already returns TAPState, so this is a sensible
cleanup in its own right.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a write() on tapfd returns EAGAIN, return zero so that the packet
gets queued (in the case of async send) and enable polling tapfd for
writing.
When tapfd becomes writable, disable write polling and flush any queued
packets.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a helper to enable/disable the read polling on tapfd.
We need this, because we want to start write polling on the tapfd too
and enable/disable both types of polling independently.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If tap has any packets queued at host_net_remove time, it needs to purge
them in order to prevent a sent callback being invoked for it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If net client sends packets asynchronously, it needs to purge its queued
packets in cleanup() so as to prevent sent callbacks being invoked with
a freed client.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
APIC reset handler already resets cpu, no need to reset it twice.
Also register cpu_reset handler directly to make it impossible to
add additional code to main_cpu_reset() by mistake.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make drive_init() accept addr=, put the value into struct DriveInfo.
Use it in all the places that create virtio-blk-pci devices:
pc_init1(), bamboo_init(), mpc8544ds_init().
Don't support addr= in third argument of monitor command pci_add and
second argument of drive_add, because that clashes with their first
arguments. Admittedly unelegant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simply pass the PCI address through qemu_pci_hot_add_nic() to
pci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().
Before, pci_device_hot_add() passed along the PCI bus to use, and
ignored any user-specified slot.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make net_client_init() accept addr=, put the value into struct
NICinfo. Use it in pci_nic_init(), and remove arguments bus and
devfn.
Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument. Admittedly unelegant.
Machines "malta" and "r2d" have a default NIC with a well-known PCI
address. Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
use NULL instead of 0 for pci_register_device() argument
for consistency. Any other caller uses NULL.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When virtio-net was merged in from qemu-kvm.git, the VNET_HDR related
features were dropped from the code.
However, VIRTIO_NET_F_MRG_RXBUF appears to have accidentally been
dropped too. Re-instate that now.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
introruce piix4_device_hot_add() for piix4 specific code
and make qemu_system_device_hot_add() generic.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should fix compilation problem in case of CONFIG_USER_ONLY.
Currently INIT/SIPI is handled in the context of CPU that sends IPI.
This patch changes this to handle them like all other events in a main
cpu exec loop. When KVM will gain thread per vcpu capability it will
be much more clear to handle those event by cpu thread itself and not
modify one cpu's state from the context of the other.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support a new feature flag for indirect ring entries. These are ring
entries which point to a table of buffer descriptors.
The idea here is to increase the ring capacity by allowing a larger
effective ring size whereby the ring size dictates the number of
requests that may be outstanding, rather than the size of those
requests.
This should be most effective in the case of block I/O where we can
potentially benefit by concurrently dispatching a large number of
large requests. Even in the simple case of single segment block
requests, this results in a threefold increase in ring capacity.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change the vring descriptor helpers to take the physical
address of the descriptor table rather than a virtqueue.
This is needed in order to allow these helpers to be used
with an indirect descriptor table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix the pcap dumps on Win32 and other systems where O_BINARY is required.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code how it is today, is totally painful to read and keep.
To begin with, the code is duplicated with the option rom loading
code that linux_boot and vga are already using.
This patch introduces a "bootable" state in NICInfo structure,
that we can use to keep track of whether or not a given nic should
be bootable, avoiding the introduction of yet another global state.
With that in hands, we move the code in vl.c to hw/pc.c, and use
the already existing infra structure to load those option roms.
Error checking code suggested by Mark McLoughlin
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
> malc wrote:
>>
>> On my system the above line causes gcc to emit:
>>
>> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:
>> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:48: error: syntax error before '*' token
>> /usr/include/linux/futex.h:63: error: field `list' has incomplete type
>> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:83: error: syntax error before '*' token
>> make[1]: *** [strace.o] Error 1
> We had the same problem with usb-linux.c. It's broken system headers,
> the __user stuff is supposed to get removed as part of the headers
> installation.
> It builds fine on my system (Fedora 10).
Howabout something like this:
commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45
Author: Riku Voipio <riku.voipio@iki.fi>
Date: Thu Jun 18 22:44:31 2009 +0300
Subject: linux-user: include futex defines directly
Since some common distributions have broken linux/futex.h, stop
including it. Instead add the defines directly.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Also zero pci_irq_levels on reset to avoid stuck irq after reset.
Based on 15a1956af9 by Gleb Natapov.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Also zero pci_irq_levels on reset to avoid stuck irq after reset.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Yaniv Kamay <ykamay@redhat.com>
