Commit Graph

306 Commits

Author SHA1 Message Date
Igor Mammedov
38003951b5 q35: acpi: drop not needed PCMachineClass::do_not_add_smb_acpi
by default we do not version ACPI AML as it's considered
a part of firmware. Drop do_not_add_smb_acpi that blocked
SMBUS AML description on 3.1 and older machine types without
providing justification.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09 19:32:49 -04:00
Xiaoyao Li
c300bbe8d2 hw/i386: Make pic a property of common x86 base machine type
Legacy PIC (8259) cannot be supported for TDX guests since TDX module
doesn't allow directly interrupt injection.  Using posted interrupts
for the PIC is not a viable option as the guest BIOS/kernel will not
do EOI for PIC IRQs, i.e. will leave the vIRR bit set.

Make PIC the property of common x86 machine type. Hence all x86
machines, including microvm, can disable it.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 16:15:40 -04:00
Cornelia Huck
0ca703662e hw: Add compat machines for 7.1
Add 7.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220316145521.1224083-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-04-20 09:36:24 +02:00
Eduardo Habkost
0e4edb3b3b hw/i386: expose a "smbios-entry-point-type" PC machine property
The i440fx and Q35 machine types are both hardcoded to use the
legacy SMBIOS 2.1 (32-bit) entry point. This is a sensible
conservative choice because SeaBIOS only supports SMBIOS 2.1

EDK2, however, can also support SMBIOS 3.0 (64-bit) entry points,
and QEMU already uses this on the ARM virt machine type.

This adds a property to allow the choice of SMBIOS entry point
versions For example to opt in to 64-bit SMBIOS entry point:

   $QEMU -machine q35,smbios-entry-point-type=64

Based on a patch submitted by Daniel Berrangé.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-4-ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2022-01-07 05:19:55 -05:00
Eduardo Habkost
10be11d0b4 smbios: Rename SMBIOS_ENTRY_POINT_* enums
Rename the enums to match the naming style used by QAPI, and to
use "32" and "64" instead of "20" and "31".  This will allow us
to more easily move the enum to the QAPI schema later.

About the naming choice: "SMBIOS 2.1 entry point"/"SMBIOS 3.0
entry point" and "32-bit entry point"/"64-bit entry point" are
synonymous in the SMBIOS specification.  However, the phrases
"32-bit entry point" and "64-bit entry point" are used more often.

The new names also avoid confusion between the entry point format
and the actual SMBIOS version reported in the entry point
structure.  For example: currently the 32-bit entry point
actually report SMBIOS 2.8 support, not 2.1.

Based on portions of a patch submitted by Daniel P. Berrangé.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-2-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07 05:19:55 -05:00
Cornelia Huck
01854af2cf hw: Add compat machines for 7.0
Add 7.0 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211217143948.289995-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-01-05 09:06:36 +01:00
Julia Suvorova
c318bef762 hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
turned on, while the switch to ACPI Hot-plug will be done in the
DSDT table.

Introducing 'x-keep-native-hpc' property disables the HPC bit only
in 6.1 and as a result keeps the forced 'reserve-io' on
pcie-root-ports in 6.1 too.

[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15 09:44:46 -05:00
Igor Mammedov
2aa1842d6d pcie: rename 'native-hotplug' to 'x-native-hotplug'
Mark property as experimental/internal adding 'x-' prefix.

Property was introduced in 6.1 and it should have provided
ability to turn on native PCIE hotplug on port even when
ACPI PCI hotplug is in use is user explicitly sets property
on CLI. However that never worked since slot is wired to
ACPI hotplug controller.
Another non-intended usecase: disable native hotplug on slot
when APCI based hotplug is disabled, which works but slot has
'hotplug' property for this taks.

It should be relatively safe to rename it to experimental
as no users should exist for it and given that the property
is broken we don't really want to leave it around for much
longer lest users start using it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211112110857.3116853-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15 09:44:46 -05:00
Paolo Bonzini
f014c97459 target/i386: move linuxboot_dma_enabled to X86MachineState
This removes a parameter from x86_load_linux, and will avoid code
duplication between the linux and multiboot cases once multiboot
starts to support DMA.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-02 15:57:27 +01:00
Yanan Wang
2b52619994 machine: Move smp_prefer_sockets to struct SMPCompatProps
Now we have a common structure SMPCompatProps used to store information
about SMP compatibility stuff, so we can also move smp_prefer_sockets
there for cleaner code.

No functional change intended.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-15-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:29:15 +02:00
Yanan Wang
4a0af2930a machine: Prefer cores over sockets in smp parsing since 6.2
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.

Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.

In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:16 +02:00
Sean Christopherson
97488c635e q35: Add support for SGX EPC
Enable SGX EPC virtualization, which is currently only support by KVM.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-21-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Ani Sinha
aa29466b48 hw/acpi: define PIIX4 acpi pci hotplug property strings at a single place
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being
used for both q35 and i440fx machine types, it is better that we defined this
property string at a single place within a header file like other PIIX4
properties. We can then use this single definition at all the places that needs
it instead of duplicating the string everywhere. While at it, this change also
adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses
this definition at all places that were formally using the string value.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210816083214.105740-1-ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-04 09:07:45 -04:00
Yanan Wang
52e64f5b1f hw: Add compat machines for 6.2
Add 6.2 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01 11:08:16 +01:00
Peter Maydell
7f4c520dac arch_init.h: Don't include arch_init.h unnecessarily
arch_init.h only defines the QEMU_ARCH_* enumeration and the
arch_type global. Don't include it in files that don't use those.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
2021-08-26 17:02:00 +01:00
Julia Suvorova
3f3cbbb236 hw/pci/pcie: Do not set HPC flag if acpihp is used
Instead of changing the hot-plug type in _OSC register, do not
set the 'Hot-Plug Capable' flag. This way guest will choose ACPI
hot-plug if it is preferred and leave the option to use SHPC with
pcie-pci-bridge.

The ability to control hot-plug for each downstream port is retained,
while 'hotplug=off' on the port means all hot-plug types are disabled.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210713004205.775386-4-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16 04:33:35 -04:00
Thomas Huth
ee86213aa3 Do not include exec/address-spaces.h if it's not really necessary
Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Cornelia Huck
da7e13c00b hw: add compat machines for 6.1
Add 6.1 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20210331111900.118274-1-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-30 11:16:51 +01:00
Vitaly Cheptsov
0a343a5add i386/acpi: restore device paths for pre-5.1 vms
After fixing the _UID value for the primary PCI root bridge in
af1b80ae it was discovered that this change updates Windows
configuration in an incompatible way causing network configuration
failure unless DHCP is used. More details provided on the list:

https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html

This change reverts the _UID update from 1 to 0 for q35 and i440fx
VMs before version 5.2 to maintain the original behaviour when
upgrading.

Cc: qemu-stable@nongnu.org
Cc: qemu-devel@nongnu.org
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-Id: <20210301195919.9333-1-cheptsov@ispras.ru>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: af1b80ae56 ("i386/acpi: fix inconsistent QEMU/OVMF device paths")
2021-03-02 05:40:35 -05:00
Cornelia Huck
576a00bdeb hw: add compat machines for 6.0
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201109173928.1001764-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:58 -05:00
Vitaly Kuznetsov
8700a98443 target/i386: always create kvmclock device
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.

Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.

Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:36 +02:00
Philippe Mathieu-Daudé
b2a3b8d787 hw/i386/q35: Remove unreachable Xen code on Q35 machine
Xen accelerator requires specific changes to a machine to be able
to use it. See for example the 'Xen PC' machine configure its PCI
bus calling pc_xen_hvm_init_pci(). There is no 'Xen Q35' machine
declared. This code was probably added while introducing the Q35
machine, based on the existing PC machine (see commit df2d8b3ed4
"Introduce q35 pc based chipset emulator"). Remove the unreachable
code to simplify this file.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200722082517.18708-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:11:36 +02:00
Igor Mammedov
b21aa7e01e numa: drop support for '-numa node' (without memory specified)
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)

Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:20 +02:00
David Hildenbrand
d110b6b4d6 pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.

Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:29 -04:00
Gerd Hoffmann
50aef13181 x86: move acpi_dev from pc/microvm
Both pc and microvm machine types have a acpi_dev field.
Move it to the common base type.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-15-kraxel@redhat.com
2020-09-17 14:16:19 +02:00
Cornelia Huck
3ff3c5d317 hw: add compat machines for 5.2
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-19 10:45:48 -04:00
Markus Armbruster
5325cc34a2 qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:

    void object_property_set_FOO(Object *obj, FOO_TYPE value,
                                 const char *name, Error **errp)

Having to pass value before name feels grating.  Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

    @@
    identifier fun = {
        object_property_get, object_property_parse, object_property_set_str,
        object_property_set_link, object_property_set_bool,
        object_property_set_int, object_property_set_uint, object_property_set,
        object_property_set_qobject
    };
    expression obj, v, name, errp;
    @@
    -    fun(obj, v, name, errp)
    +    fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually.  The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-10 15:18:08 +02:00
Peter Maydell
8796c64ecd audio: deprecate -soundhw
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCgAGBQJfA3uDAAoJEEy22O7T6HE4sfEQAIF5gEmYirMMZWeh57XxlxJ8
 AftJphRGIY3XaBZOWkTEX6K7SCMqslFbDH6orqHc6ca1O/70azwTmh3EwI3dqKp2
 OuEUx79iqwWi1nfkDzZtEziUyPuMH06CsjOP6CMPIP/gM+oawa0ocaci4r8o6TCQ
 zkifggGFMFvWjY9+ESeiDjH0bDAshh54VcB/b4zy8HQ/Wt52b7JshMiK4FDnG+Ci
 kDcPIzolH4yA5M4HR9IUJ314Yq+Xmx7YF6VzfZkTbX+oyepz1zFkr3CdW2sPn948
 6JfHlkGbsVGzbD0nXZUuE1m9j6iFMqPXOifersLZc9XJVpEfgRIVp3znl6bwki8m
 MOjpsXiLRUyUxd7KswTuABz5QrkrGs4pLsvky04vKBQVJyZIHjApOgPaMfOuVzMC
 0i/mN+37O0aTwU6IQCYMnqhXj3l79Wt3ZhD54nZl0Nt+8tlDEsnMj63zc3eF/qqp
 cYGxetJnG/73CPogdjxlH4z0GRBS4adn/kTjLQnRQCy1tCyKMNHYhy9MXO34JcjL
 4TWVVg45AnqHLJ9nSRS3ErOaoQN36p+sR28VVZ3dqJTvN69ErQx1LWCiA/Z7CeaR
 cKv8HHE+AcrOFZkxLyYhQsltuqZWCILsrWBvLvfwtfWP4BCbQndmwefVUVo295Ak
 +K7H1hAAEVtd8OJeyFek
 =oMK8
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20200706-pull-request' into staging

audio: deprecate -soundhw

# gpg: Signature made Mon 06 Jul 2020 20:29:07 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20200706-pull-request:
  audio: set default value for pcspk.iobase property
  pcspk: update docs/system/target-i386-desc.rst.inc
  audio: add soundhw deprecation notice
  audio: deprecate -soundhw pcspk
  audio: create pcspk device early
  audio: rework pcspk_init()
  softmmu: initialize spice and audio earlier
  pc_basic_device_init: drop no_vmport arg
  pc_basic_device_init: drop has_pit arg
  pc_basic_device_init: pass PCMachineState
  audio: deprecate -soundhw hda
  audio: deprecate -soundhw sb16
  audio: deprecate -soundhw gus
  audio: deprecate -soundhw cs4231a
  audio: deprecate -soundhw adlib
  audio: deprecate -soundhw es1370
  audio: deprecate -soundhw ac97
  audio: add deprecated_register_soundhw
  stubs: add pci_create_simple
  stubs: add isa_create_simple

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-08 16:33:59 +01:00
Gerd Hoffmann
8859f07279 pc_basic_device_init: drop no_vmport arg
Now that we pass pcms anyway, we don't need the no_vmport arg any more.
No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-14-kraxel@redhat.com
2020-07-06 17:01:11 +02:00
Gerd Hoffmann
c52e7bbbaf pc_basic_device_init: drop has_pit arg
Now that we pass pcms anyway, we don't need the has_pit arg any more.
No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-13-kraxel@redhat.com
2020-07-06 17:01:11 +02:00
Gerd Hoffmann
10e2483b5f pc_basic_device_init: pass PCMachineState
Need access to pcms for pcspk initialization.
Just preparation, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-12-kraxel@redhat.com
2020-07-06 17:01:11 +02:00
David Hildenbrand
195784a0cf numa: Auto-enable NUMA when any memory devices are possible
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.

This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.

Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".

Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
Igor Mammedov
32a354dc6c numa: forbid '-numa node, mem' for 5.1 and newer machine types
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a.  Disable legacy option for new machine
types (since 5.1) and amend documentation.

'-numa node,memdev' shall be used instead of disabled option
with new machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Gerd Hoffmann
9a45729d3b x86: move max-ram-below-4g to pc
Move from X86MachineClass to PCMachineClass so it disappears
from microvm machine type property list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-id: 20200529073957.8018-4-kraxel@redhat.com
2020-06-17 14:24:22 +02:00
Markus Armbruster
3c6ef471ee sysbus: Convert to sysbus_realize() etc. with Coccinelle
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

    @@
    expression dev, errp;
    @@
    -    qdev_realize(DEVICE(dev), NULL, errp);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), errp);

    @@
    expression sysbus_dev, dev, errp;
    @@
    +    sysbus_dev = SYS_BUS_DEVICE(dev);
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);
    -    sysbus_dev = SYS_BUS_DEVICE(dev);

    @@
    expression sysbus_dev, dev, errp;
    expression expr;
    @@
         sysbus_dev = SYS_BUS_DEVICE(dev);
         ... when != dev = expr;
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(DEVICE(dev), NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:05:28 +02:00
Markus Armbruster
9307d06da9 pci: Convert uses of pci_create() etc. with Coccinelle
Replace

    dev = pci_create(bus, type_name);
    ...
    qdev_init_nofail(dev);

by

    dev = pci_new(type_name);
    ...
    pci_realize_and_unref(dev, bus, &error_fatal);

and similarly for pci_create_multifunction().

Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains
why.

Coccinelle script:

    @@
    expression dev, bus, expr;
    expression list args;
    @@
    -    dev = pci_create(bus, args);
    +    dev = pci_new(args);
         ... when != dev = expr
    -    qdev_init_nofail(&dev->qdev);
    +    pci_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression dev, bus, expr;
    expression list args;
    expression d;
    @@
    -    dev = pci_create(bus, args);
    +    dev = pci_new(args);
    (
         d = &dev->qdev;
    |
         d = DEVICE(dev);
    )
         ... when != dev = expr
    -    qdev_init_nofail(d);
    +    pci_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression dev, bus, expr;
    expression list args;
    @@
    -    dev = pci_create(bus, args);
    +    dev = pci_new(args);
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    pci_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression dev, bus, expr;
    expression list args;
    @@
    -    dev = DEVICE(pci_create(bus, args));
    +    PCIDevice *pci_dev; // TODO move
    +    pci_dev = pci_new(args);
    +    dev = DEVICE(pci_dev);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    pci_realize_and_unref(pci_dev, bus, &error_fatal);

    @@
    expression dev, bus, expr;
    expression list args;
    @@
    -    dev = pci_create_multifunction(bus, args);
    +    dev = pci_new_multifunction(args);
         ... when != dev = expr
    -    qdev_init_nofail(&dev->qdev);
    +    pci_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, expr;
    expression list args;
    identifier dev;
    @@
    -    PCIDevice *dev = pci_create_multifunction(bus, args);
    +    PCIDevice *dev = pci_new_multifunction(args);
         ... when != dev = expr
    -    qdev_init_nofail(&dev->qdev);
    +    pci_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression dev, bus, expr;
    expression list args;
    @@
    -    dev = pci_create_multifunction(bus, args);
    +    dev = pci_new_multifunction(args);
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    pci_realize_and_unref(dev, bus, &error_fatal);

Missing #include "qapi/error.h" added manually, whitespace changes
minimized manually, @pci_dev declarations moved manually.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-16-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
3e80f6902c qdev: Convert uses of qdev_create() with Coccinelle
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion.  More to come in
this series.

Coccinelle script:

    @ depends on !(file in "hw/arm/highbank.c")@
    expression bus, type_name, dev, expr;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr;
    identifier DOWN;
    @@
    -    dev = DOWN(qdev_create(bus, type_name));
    +    dev = DOWN(qdev_new(type_name));
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

    @@
    expression bus, type_name, expr;
    identifier dev;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr, errp;
    symbol true;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

    @@
    expression bus, type_name, expr, errp;
    identifier dev;
    symbol true;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name.  Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:00:10 +02:00
Philippe Mathieu-Daudé
da278d58a0 accel: Move Xen accelerator code under accel/xen/
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.

Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:09:56 -04:00
Jon Doron
cab78e7cb2 i386:pc: whitelist dynamic vmbus-bridge
As vmbus-bridge is derived from sysbus device, it has to be whitelisted
to be allowed to be created with -device.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424123444.3481728-5-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:09:40 -04:00
Markus Armbruster
d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Cornelia Huck
541aaa1df8 hw: add compat machines for 5.1
Add 5.1 machine types for arm/i440fx/q35/s390x/spapr.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20200429144605.7262-1-cohuck@redhat.com
2020-05-06 10:12:16 -04:00
Kwangwoo Lee
5c94b82662 nvdimm: Use configurable ACPI IO base and size
This patch makes IO base and size configurable to create NPIO AML for
ACPI NFIT. Since a different architecture like AArch64 does not use
port-mapped IO, a configurable IO base is required to create correct
mapping of ACPI IO address and size.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-3-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04 10:25:02 -04:00
Philippe Mathieu-Daudé
4b997690c6 hw/i386: Include "hw/mem/nvdimm.h"
All this files use methods/definitions declared in the NVDIMM
device header. Include it.

This fixes (when modifying unrelated headers):

  hw/i386/acpi-build.c:2733:9: error: implicit declaration of function 'nvdimm_build_acpi' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
        nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
        ^
  hw/i386/pc.c:1996:61: error: use of undeclared identifier 'TYPE_NVDIMM'
    const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
                                                            ^
  hw/i386/pc.c:2032:55: error: use of undeclared identifier 'TYPE_NVDIMM'
    bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
                                                      ^
  hw/i386/pc.c:2040:9: error: implicit declaration of function 'nvdimm_plug' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
        nvdimm_plug(ms->nvdimms_state);
        ^
  hw/i386/pc.c:2040:9: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
        nvdimm_plug(ms->nvdimms_state);
        ^
  hw/i386/pc.c:2065:42: error: use of undeclared identifier 'TYPE_NVDIMM'
    if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
                                         ^
  hw/i386/pc_i440fx.c:307:9: error: implicit declaration of function 'nvdimm_init_acpi_state' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
        nvdimm_init_acpi_state(machine->nvdimms_state, system_io,
        ^
  hw/i386/pc_q35.c:332:9: error: implicit declaration of function 'nvdimm_init_acpi_state' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
        nvdimm_init_acpi_state(machine->nvdimms_state, system_io,
        ^

Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-17-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Denis Plotnikov
d940208cbb hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
5.0 machine type uses 4.2 compats. This seems to be incorrect, since
the latests machine type by now is 5.0 and it should use its own
compat or shouldn't use any relying on the defaults.
Seems, like this appeared because of some problems on merge/rebase.

Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05 07:03:03 -05:00
Paolo Bonzini
ed9e923c3c x86: move SMM property to X86MachineState
Add it to microvm as well, it is a generic property of the x86
architecture.

Suggested-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:33:50 +01:00
Cornelia Huck
3eb74d2087 hw: add compat machines for 5.0
Add 5.0 machine types for arm/i440fx/q35/s390x/spapr.

For i440fx and q35, unversioned cpu models are still translated
to -v1; I'll leave changing this (if desired) to the respective
maintainers.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191112104811.30323-1-cohuck@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-14 10:25:50 +01:00
Evgeny Yakovlev
5f2585772f virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertised
Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device
Initialization:

"Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if
they offer VIRTIO_BLK_F_CONFIG_WCE"

Currently F_CONFIG_WCE and F_WCE are not connected to each other.
Qemu will advertise F_CONFIG_WCE if config-wce argument is
set for virtio-blk device. And F_WCE is advertised only if
underlying block backend actually has it's caching enabled.

Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised.

To preserve backwards compatibility with newer machine types make this
behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device
property and introduce hw_compat_4_2 with new property being off by
default for all machine types <= 4.2 (but don't introduce 4.3
machine type itself yet).

Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-12-13 11:22:06 +00:00
Liam Merwick
2f34ebf222 hw/i386: Move save_tsc_khz from PCMachineClass to X86MachineClass
Attempting to migrate a VM using the microvm machine class results in the source
QEMU aborting with the following message/backtrace:

target/i386/machine.c:955:tsc_khz_needed: Object 0x555556608fa0 is not an
instance of type generic-pc-machine

abort()
object_class_dynamic_cast_assert()
vmstate_save_state_v()
vmstate_save_state()
vmstate_save()
qemu_savevm_state_complete_precopy()
migration_thread()
migration_thread()
migration_thread()
qemu_thread_start()
start_thread()
clone()

The access to the machine class returned by MACHINE_GET_CLASS() in
tsc_khz_needed() is crashing as it is trying to dereference a different
type of machine class object (TYPE_PC_MACHINE) to that of this microVM.

This can be resolved by extending the changes in the following commit
f0bb276bf8 ("hw/i386: split PCMachineState deriving X86MachineState from it")
and moving the save_tsc_khz field in PCMachineClass to X86MachineClass.

Fixes: f0bb276bf8 ("hw/i386: split PCMachineState deriving X86MachineState from it")
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <1574075605-25215-1-git-send-email-liam.merwick@oracle.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-19 10:01:34 +01:00
Paolo Bonzini
6f529b7534 target/i386: move FERR handling to target/i386
Move it out of pc.c since it is strictly tied to TCG.  This is
almost exclusively code movement, the next patch will implement
IGNNE.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:07 +02:00
Paolo Bonzini
673652a785 Merge commit 'df84f17' into HEAD
This merge fixes a semantic conflict with the trivial tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:02 +02:00