Cirrus is triggering this, e.g. during Win2k boot: Changes only on
disabled regions require no topology update when transaction depth drops
to 0 again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A compiler warning is caused by the unused local function reinit_timers
on non-POSIX hosts. Include that function only for POSIX hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Keep saving display surface parameters at init and using these cached
values instead of getting them when needed. Not sure why this is
needed (maybe due to the interaction with the vga device) but not
doing this broke the Xorg vmware driver at least.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since 0b57e287, cpu_memory_rw_debug already triggers a TB invalidation.
As it doesn't (and cannot) set is_cpu_write_access=1 but "consumes" the
currently executed TB, the tb_invalidate_phys_page_range call from
patch_instruction didn't work anymore.
Fix this by open-coding the required bits to restore the CPU state from
the current TB position before patching and resume execution on the
patched instruction afterward.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The xhci device does correct endian switches on the results of some DMAs
but not all. In particular, there are many DMAs of what are essentially
arrays of 32-bit integers which never get byteswapped. This causes them
to be interpreted incorrectly on big-endian hosts, since (as per the xhci
spec) these arrays are always little-endian in guest memory.
This patch adds some helper functions to fix these bugs. This may not be
all the endian bugs in the xhci code, but it's certainly some of them and
the Linux guest xhci driver certainly gets further with these fixes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead make ehci_execute and ehci_fill_queue return the again value.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since with the ehci and xhci controllers a single packet can be larger
then maxpacketsize, it is possible for the result of a single packet
to be both having transferred some data as well as the transfer to have
an error.
An example would be an input transfer from a bulk endpoint successfully
receiving 1 or more maxpacketsize packets from the device, followed
by a packet signalling halt.
While already touching all the devices and controllers handle_packet /
handle_data / handle_control code, also change the return type of
these functions to void, solely storing the status in the packet. To
make the code paths for regular versus async packet handling more
uniform.
This patch unfortunately is somewhat invasive, since makeing the qemu
usb core deal with this requires changes everywhere. This patch only
prepares the usb core for this, all the hcd / device changes are done
in such a way that there are no functional changes.
This patch has been tested with uhci and ehci hcds, together with usb-audio,
usb-hid and usb-storage devices, as well as with usb-redir redirection
with a wide variety of real devices.
Note that there is usually no need to directly set packet->actual_length
form devices handle_data callback, as that is done by usb_packet_copy()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The swaph instruction was not decoding correctly. s/1e1/1e2 on the
9 LSBs on the instruction decode.
Reported-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Tools were broken because they initialized the block layer while
qemu_aio_context was still NULL.
Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
mmu access looks something like:
<check tlb>
if miss goto slow_path
<fast path>
done:
...
; end of the TB
slow_path:
<pre process>
mr r3, r27 ; move areg0 to r3
; (r3 holds the first argument for all the PPC32 ABIs)
<call mmu_helper>
b $+8
.long done
<post process>
b done
On ppc32 <call mmu_helper> is:
(SysV and Darwin)
mmu_helper is most likely not within direct branching distance from
the call site, necessitating
a. moving 32 bit offset of mmu_helper into a GPR ; 8 bytes
b. moving GPR to CTR/LR ; 4 bytes
c. (finally) branching to CTR/LR ; 4 bytes
r3 setting - 4 bytes
call - 16 bytes
dummy jump over retaddr - 4 bytes
embedded retaddr - 4 bytes
Total overhead - 28 bytes
(PowerOpen (AIX))
a. moving 32 bit offset of mmu_helper's TOC into a GPR1 ; 8 bytes
b. loading 32 bit function pointer into GPR2 ; 4 bytes
c. moving GPR2 to CTR/LR ; 4 bytes
d. loading 32 bit small area pointer into R2 ; 4 bytes
e. (finally) branching to CTR/LR ; 4 bytes
r3 setting - 4 bytes
call - 24 bytes
dummy jump over retaddr - 4 bytes
embedded retaddr - 4 bytes
Total overhead - 36 bytes
Following is done to trim the code size of slow path sections:
In tcg_target_qemu_prologue trampolines are emitted that look like this:
trampoline:
mfspr r3, LR
addi r3, 4
mtspr LR, r3 ; fixup LR to point over embedded retaddr
mr r3, r27
<jump mmu_helper> ; tail call of sorts
And slow path becomes:
slow_path:
<pre process>
<call trampoline>
.long done
<post process>
b done
call - 4 bytes (trampoline is within code gen buffer
and most likely accessible via
direct branch)
embedded retaddr - 4 bytes
Total overhead - 8 bytes
In the end the icache pressure is decreased by 20/28 bytes at the cost
of an extra jump to trampoline and adjusting LR (to skip over embedded
retaddr) once inside.
Signed-off-by: malc <av1474@comtv.ru>
Register displaychangelistener last, after spice is fully initialized,
otherwise we may hit NULL pointer dereferences when qemu starts calling
our callbacks.
Commit e250d949fe triggers this bug.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When entering vga mode the display size likely changes,
notify all displaychangelisteners about this.
Probably went unnoticed for a while as one if the first
things the guest does after leaving qxl native mode and
entering qxl vga mode is to set the vga video mode. But
there is still a small window where qemu can operate on
stale data, leading to crashes now and then.
https://bugzilla.redhat.com/show_bug.cgi?id=865767
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to usage of pixman for rendering on all spice surfaces we have
pixman's requirement that the stride be word aligned. A guest not
honoring that can crash spice and qemu with it due to failure to create
a surface (in spice-server). Avoid this early on in primary surface
creation and offscreen surface creation.
Recently windows guests got odd width support which triggers a non word
aligned primary surface in 16bit color depth. Off screen surfaces have
always been word aligned, but doesn't hurt to check them here too.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix build on a 32 bit host:
CC mips-softmmu/target-mips/dsp_helper.o
/src/qemu/target-mips/dsp_helper.c: In function 'helper_dextr_rs_w':
/src/qemu/target-mips/dsp_helper.c:3556: error: integer constant is too large for 'long' type
/src/qemu/target-mips/dsp_helper.c: In function 'helper_extr_s_h':
/src/qemu/target-mips/dsp_helper.c:3656: error: integer constant is too large for 'long' type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Postpone stopping the dirty log to the point where the command fifo is
configured to allow drivers which don't use the fifo to work too.
(Without this the picture rendered into the vram never got to the
screen and the DIRECT_VRAM option meant to support this case was
removed a year ago.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to the documentation drivers using this device should read
FB_SIZE before enabling the device to know what memory to map. This
would not work if we return 0 before enabled. The docs also mention
reading SVGA_REG_DEPTH but not writing it. (Only SVGA_REG_BITS_PER_PIXEL
can be written but we don't really support that either.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Removed info from vmsvga_state that is available from elsewhere and
thus was duplicated here unnecessarily.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
pc: Drop redundant test for ROM memory region
exec: make some functions static
target-ppc: make some functions static
ppc: add missing static
vnc: add missing static
vl.c: add missing static
target-sparc: make do_unaligned_access static
m68k: Return semihosting errno values correctly
cadence_uart: More debug information
Conflicts:
target-m68k/m68k-semi.c
Add optimized TCG qemu_ld/st generation which locates the code of TLB miss
cases at the end of a block after generating the other IRs.
Currently, this optimization supports only i386 and x86_64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add GETPC_EXT which is used by MMU helpers to selectively calculate the code
address of accessing guest memory when called from a qemu_ld/st optimized code
or a C function. Currently, it supports only i386 and x86-64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when
a host is i386 or x86_64.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Abstract out the use of put_user for returning semihosting call results,
so that we can log when a guest erroneously attempts a semihosting call
with an unwritable argument block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Handle failure of get_user accessing the semihosting
argument block, rather than simply ignoring the failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixing a simple typo, s/errno/err/, that caused
the error status from GDB semihosted system calls
to be returned incorrectly.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit ac4119c (chardev: Use timer instead of bottom-half to postpone
open event, 2012-10-12) moved the alarm timer initialization to an earlier
point but failed to consider that it depends on qemu_init_main_loop.
Later, commit 1c53786 (vl: init main loop earlier, 2012-10-30) fixed
this, but left -daemonize in two different ways. First, timers need to
be reinitialized after forking. Second, the global mutex was being held
by the parent, and thus dropped after forking.
The first is now fixed using pthread_atfork. For the second part,
make sure that the global mutex is not taken before daemonization,
and similarly delay qemu_thread_self.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
init_timer_alarm was being called twice. This is not needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenBSD and Darwin do not have sem_timedwait. Implement a fallback
for them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Weakrefs only tell you if the symbol was defined elsewhere, so you
need a further check at runtime to pick the default definition
when needed.
This could be automated by the compiler, but it does not do it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/migr-coroutine:
migration: move process_incoming_migration to a coroutine
migration: handle EAGAIN while reading QEMUFile
migration: move qemu_fclose to process_incoming_migration
migration: close socket QEMUFile from socket_close
migration: xxx_close will only be called once
migration: use closesocket, not close
migration: use migrate_fd_close in migrate_fd_cleanup
migration: clean up server sockets and handlers before invoking process_incoming_migration
migration: replace qemu_stdio_fd with qemu_get_fd
migration: add qemu_get_fd
migration: consolidate QEMUFile methods in a single QEMUFileOps struct
migration: unify stdio-based QEMUFile operations
The final part of incoming migration, which now consists of
process_incoming_migration for all protocols, is thus made non-blocking.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will never happen right now (the assertion would fail). The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.
Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix is now just process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix now is process_incoming_migration+qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to test s->fd again, it is tested in the caller.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows requires this. Migration does not quite work under Windows
but let's be uniform across QEMU.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
