Remove un needed casts from void *.
Use DO_UPCAST() instead of blind casts
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once again, the emulation of the EERD and ICS registers in e1000.c is
incorrect. Nobody has noticed this before because none of the Intel-written
e1000 drivers use these registers, and all of the independently written open
source drivers copy Intel's example, so they don't use them either.
Regardless, these registers are documented in the programmer's manuals, and
their emulated behavior doesn't match the verified behavior of real hardware,
so any software that does use them doesn't function correctly.
-Bill
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The sequence of reading from eeprom is "offset by one" moved because of a false
detection of a clock cycle after an eeprom reset. Keeping the last clock value
after a reset keeps it in sync.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters. Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 3dcd219f09.
It is incorrect to call qemu_irq functions (or any other functions that
access other device state) during savevm/loadvm.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This function is used to manage a PCI BAR, so make the more generic
pci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* net-queue: (28 commits)
virtio-net: Increase filter and control limits
virtio-net: Add new RX filter controls
virtio-net: MAC filter optimization
virtio-net: Fix MAC filter overflow handling
virtio-net: reorganize receive_filter()
virtio-net: Use a byte to store RX mode flags
virtio-net: Add version_id 7 placeholder for vnet header support
virtio-net: implement rx packet queueing
net: make use of async packet sending API in tap client
net: add qemu_send_packet_async()
net: split out packet queueing and flushing into separate functions
net: return status from qemu_deliver_packet()
net: add return value to packet receive handler
net: pass VLANClientState* as first arg to receive handlers
net: re-name vc->fd_read() to vc->receive()
net: add fd_readv() handler to qemu_new_vlan_client() args
net: only read from tapfd when we can send
net: vlan clients with no fd_can_read() can always receive
net: move the tap buffer into TAPState
net: factor tap_read_packet() out of tap_send()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VLANClientState's fd_read() handler doesn't read from file
descriptors, it adds a buffer to the client's receive queue.
Re-name the handlers to make things a little less confusing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This, apparently, is the style we prefer - all VLANClientState
should be an argument to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
When a reset is requested, the current e1000 emulation never clears the
reset bit which may cause a driver to hang. This patch masks the reset
bit out when setting the control registert, so the reset is immediately
completed.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci_register_device already mallocs the pci config space buffer filled
with zeroes.
Doing this again breaks some default config space writes like
setting the subsystem vendor id and subsystem device id.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pci_register_device() call in PCI nic initialization routines can
fail. Handle this failure and propagate a meaningful error message to
the user instead of generating a SEGV.
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're currently leaking memory and file descriptors on device
hot-unplug.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
NICInfo isn't used after initialization, so remove it from the driver
state structures.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7147 c046a42c-6fe2-441c-8c8c-71466251a162
The RXDMT0 interrupt is supposed to fire when the number of free
RX descriptors drops to some fraction of the total descriptors.
However in practice, it seems like we're adding this interrupt
cause on every RX. Fix the logic to treat (tail - head) as the
number of free entries rather than the number of used entries.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6864 c046a42c-6fe2-441c-8c8c-71466251a162
Change the PCI network drivers init functions to return the PCIDev, to
inform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on
hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1:
Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
accessors as suggested by Anthony Liguori.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
On link up or down we set the E1000_STATUS_LU ("link up") bit
in the status register and set the E1000_ICR_LSC ("link
status changed") bit in the interrupt cause register before
interrupting the guest.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6249 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the user to supply a vlan client name on the command line.
This is probably only useful for management tools so that they can
use their own names rather than parsing the output of 'info network'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
Factor out a simple little function for formatting a NIC's
info_str and make all NICs use it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
Don't lose track of what type/model a vlan client is so that we can
e.g. assign a global per-model id to clients.
The entire patch is basically a tedious excercise in making sure the
type/model string gets propagated down to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
MMIO exits are more expensive in KVM or Xen than in QEMU because they
involve, at least, privilege transitions. However, MMIO write
operations can be effectively batched if those writes do not have side
effects.
Good examples of this include VGA pixel operations when in a planar
mode. As it turns out, we can get a nice boost in other areas too.
Laurent mentioned a 9.7% performance boost in iperf with the coalesced
MMIO changes for the e1000 when he originally posted this work for KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162
We're currently ignoring the e1000 VLAN tagging, stripping and filtering
features in the e1000 emulation. This patch adds backing for the
relevant registers and provides a software implementation of the
acceleration, such that a guest can make use of VLANs.
This is mostly (only?) useful for a guest on a bridge (not user mode
networking). The only caveat beyond that is that you need to make sure
the host NIC isn't doing it's own tagging, stripping, or filtering.
This generally means the host NIC on the bridge should not be part of a
VLAN.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5766 c046a42c-6fe2-441c-8c8c-71466251a162
e1000_receive() has code to raise a receive overflow interrupt when the receive
buffer head and tail match. However, with the present implementation of
e1000_can_receive(), this code is unreachable -- and etherboot breaks as a
result.
Signed-off-by: Charles Duffy <charles_duffy@messageone.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4987 c046a42c-6fe2-441c-8c8c-71466251a162
Previously, all data descriptors used TSE context descriptor by default,
It's not correct, per spec, data descriptor uses TSE bit to indicate
whether use TSE,
Legacy data descripter never use TSE.
This patch fixed this bug.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4878 c046a42c-6fe2-441c-8c8c-71466251a162
