Backing files may be smaller than the corresponding COW file. When
reading directly from the backing file, qemu-img rebase must consider
this and assume zero sectors after the end of backing files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The caller expects psn_tab to be NULL when there are no snapshots or
an error occurs. This results in calling g_free on an invalid address.
Reported-by: Oliver Francke <Oliver@filoo.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity is confused by this "if" and reports leaks on acb->bh.
The bottom half is always deleted before releasing the AIOCB,
in either bdrv_aio_cancel_em or bdrv_aio_bh_cb.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially attempted with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
dma_bdrv_io
| dma_bdrv_read
| dma_bdrv_write
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however did not match anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E = qemu_aio_get (...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed occurrences in linux-aio.c and posix-aio-compat.c.
Those were done by hand.
The change in vdi_aio_setup's caller was also done by hand.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that early failure of bdrv_aio_writev is not possible anymore,
mcb->num_requests can be set before the loop starts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On ARM, don't map the code buffer at a fixed location, and fix up the
call/goto tcg routines to let it do long jumps.
Mapping the code buffer at a fixed address could sometimes result in it being
mapped over the top of the heap with pretty random results.
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Commit d396a657ba removed the code
for SVP, so the documentation needs this update.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The variable is deleted by 1bcef683bf
So remove its declaration.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Make tcg_const_ptr() include a cast so that you can pass it a
pointer. This allows us to drop the casts we had in all the places
that use this macro.
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
compatiblity->compatibility
transfered->transferred
transfering->transferring
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
algorythm->algorithm
rythm->rhythm
I did not try to fix the coding standard, so checkpatch.pl
reports lots of violations.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Return the correct value in the domain field in the cp15 DFSR
(C5) -- bug noticed during Xvisor development.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
[Peter Maydell: reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Destroying a mutex that another thread might have just unlocked
is racy. It usually works, but you cannot do that in general and
can lead to deadlocks or segfaults. Change ccid to use joinable
threads instead.
(Also, qemu_mutex_init/qemu_cond_init were missing).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rewrite the handshaking between qemu_thread_create and the
win32_start_routine, so that the thread can be joined without races.
Similar handshaking is done now between qemu_thread_exit and
qemu_thread_join.
This also simplifies how QemuThreads are initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to control if a QEMU thread is created joinable or not. Make it
not joinable by default to avoid that we keep the associated resources
around when terminating a thread without joining it (what we couldn't do
so far for obvious reasons).
The audio subsystem will need the join feature when converting it to
QEMU threading/locking abstractions, so provide that service.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split from Jan's original qemu-thread-posix.c patch. No semantic change,
just introduce the new API that POSIX and Win32 implementations will
conform to.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Symbian Virtual Platform was an ARM-based development and debugging
board. Since Symbian has been disbanded and the code is no longer being
used it can now be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Today net/socket.c has no consistent policy for closing the socket file
descriptor when initialization fails. This means we leak the file
descriptor in some cases or we could also try to close it twice.
Make error paths consistent by taking ownership of the file descriptor
and closing it on error.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to make later patches sane, expand the tab characters and
conform to QEMU coding style now.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that there is blacklisting functionality we can no longer infer
the agent's capabilities via version. This patch extends the current
guest-info RPC to also return a list of dictionaries containing the name
of each supported RPC, along with a boolean indicating whether or not
the command has been disabled by a guest administrator/distro.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a command-line option, -b/--blacklist, that accepts a
comma-seperated list of RPCs to disable, or prints a list of
available RPCs if passed "?".
In consequence this also adds general blacklisting and RPC listing
facilities to the new QMP dispatch/registry facilities, should the
QMP monitor ever have a need for such a thing.
Ideally, to avoid support/compatability issues in the future,
blacklisting guest agent functionality will be the exceptional
case, but we add the functionality here to handle guest administrators
with specific requirements.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a .mailmap file so 'git shortlog' can map the unfriendly
pre-git-conversion author entries to real names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case close() fails, we want to report the error back.
Changes v1 -> v2:
- Use braces on if statement to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case close() fails, we want to report the error back.
Changes v1 -> v2:
- Use braces on if statement to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All qemu_fclose() callers were already changed to accept any negative
value as error, so we now can change it to return -errno.
When the process exits with a non-zero exit code, we return -EIO to as a
fake errno value.
Changes v1 -> v2:
- Don't use "//" comments, to make checkpatch.pl happy
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is what qemu_fclose() expects.
Changes v1 -> v2:
- Add braces to if statement to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is what qemu_fclose() expects.
Changes v1 -> v2:
- On success, keep returning pclose() return value, instead of always 0.
Changes v2 -> v3:
- Add braces on if statements to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will make sure no error will be missed as long as callers always
check for qemu_fclose() return value. For reference, this is the
complete list of qemu_fclose() callers:
- exec_close(): already fixed to check for negative values, not -1
- migrate_fd_cleanup(): already fixed to consider only negative values
as error, not any non-zero value
- exec_accept_incoming_migration(): no return value check (yet)
- fd_accept_incoming_migration(): no return value check (yet)
- tcp_accept_incoming_migration(): no return value check (yet)
- unix_accept_incoming_migration(): no return value check (yet)
- do_savevm(): no return value check (yet)
- load_vmstate(): no return value check (yet)
Changes v1 -> v2:
- Add small comment about the need to return previously-spotted errors
Changes v2 -> v3:
- Add braces to "if" statements to match coding style
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also, we now return the qemu_fclose() value unchanged to the caller. For
reference, the migrate_fd_cleanup() callers are the following:
- migrate_fd_completed(): any negative value is considered an
error, so the change is OK.
- migrate_fd_error(): doesn't check the migrate_fd_cleanup() return value
- migrate_fd_cancel(): doesn't check the migrate_fd_cleanup() return
value
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that we don't return the unchanged return value back yet, because
we need to change all qemu_fclose() callers to accept any positive value
as success.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
