Commit Graph

30 Commits

Author SHA1 Message Date
Paolo Bonzini
3de70c0899 hw/i386: remove smram_update
It's easier to inline it now that most of its work is done by the CPU
(rather than the chipset) through /machine/smram and the memory API.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Paolo Bonzini
f809c60512 target-i386: use memory API to implement SMRAM
Remove cpu_smm_register and cpu_smm_update.  Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram.  This extra region is enabled or disabled
as the CPU enters/exits SMM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Paolo Bonzini
fe6567d5fd hw/i386: add a separate region that tracks the SMRAME bit
This region is exported at /machine/smram.  It is "empty" if
SMRAME=0 and points to SMRAM if SMRAME=1.  The CPU will
enable/disable it as it enters or exits SMRAM.

While touching nearby code, the existing memory region setup was
slightly inconsistent.  The smram_region is *disabled* in order to open
SMRAM (because the smram_region shows the low VRAM instead of the RAM
at 0xa0000).  Because SMRAM is closed at startup, the smram_region must
be enabled when creating the i440fx or q35 devices.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Markus Armbruster
9af21dbee1 pci: Trivial device model conversions to realize
Convert the device models where initialization obviously can't fail.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-26 12:42:16 +01:00
Hervé Poussineau
bb2ed009e7 isa: add memory space parameter to isa_bus_new
Currently, keep current behaviour by always using get_system_memory().

Also use QOM casts when possible.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13 14:09:27 +00:00
Pavel Dovgalyuk
2c9ecdeb9f piix: do not set irq while loading vmstate
This patch avoids setting an irq while loading the state of the ISA bridge.
Because the i8259 has not been deserialized yet, raising an interrupt
could bring the system out-of-sync with the migration source.  For example,
the migration source could have masked the interrupt in the i8259. On the
destination, the i8259 device model would not know that yet and would
trigger an interrupt in the CPU.

This patch eliminates setting the irq and just restores the calculated
state fields in post_load function.  Interrupt state will be deserialized
separately through the IRR field of the i8259.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11 12:20:32 +02:00
Juan Quintela
d49805aeea savevm: Remove all the unneeded version_minimum_id_old (x86)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16 04:55:26 +02:00
Igor Mammedov
2897ae0267 qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10 10:26:56 +02:00
Anthony Liguori
d1819762fc acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
 hotplug by Igor, tests and memory mapping change
 by Laszlo and pci reset cleanup by Paolo.
 There are also some fixes for fedora and virtio:
 included here since they are test blockers for me.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
 u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
 OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
 B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
 bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
 2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
 =ShCj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

acpi,pci,pc,fedora,virtio fixes and enhancements

This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

* mst/tags/for_anthony:
  target-arm: fix build with gcc 4.8.2
  virtio: add back call to virtio_bus_device_unplugged
  piix: fix 32bit pci hole
  qdev: switch reset to post-order
  qdev: allow both pre- and post-order vists in qdev walking functions
  pci: clean up resetting of IRQs
  pci: do not export pci_bus_reset
  ACPI/DSDT-CPU: cleanup bogus comment
  ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
  acpi: ich9: allow guest to clear SCI rised by GPE
  acpi: factor out common pm_update_sci() into acpi core
  acpi: piix4: remove not needed GPE0 mask
  i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
  i440fx-test: generate temporary firmware blob
  i440fx-test: give each GTest case its own qtest
  i440fx-test: qtest_start() should be paired with qtest_end()
  hw/i386/pc_sysfw: support two flash drives
  pc_piix: document gigabyte_align
  piix: gigabyte alignment for ram

Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-10 11:04:48 -08:00
Gerd Hoffmann
ddaaefb4dd piix: fix 32bit pci hole
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.

We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that.  Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23 18:02:23 +02:00
Markus Armbruster
81aab2ff11 piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
A PIIX3/PIIX4 southbridge has multiple functions.  We model each
function as a separate qdev.  Two of them need some special wiring set
up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0,
and the SMBus controller at 01.3.

The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has
always had cannot_instantiate_with_device_add_yet set, but there is no
obvious reason why device_add could not work for them.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
08c58f92f6 pci-host: Consistently set cannot_instantiate_with_device_add_yet
Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work.  Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.

Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless.  We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.

It's already set for Bonito, Grackle, i440FX and Raven.  Document why.

Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
837d37167d sysbus: Set cannot_instantiate_with_device_add_yet
device_add plugs devices into suitable bus.  For "real" buses, that
actually connects the device.  For sysbus, the connections need to be
made separately, and device_add can't do that.  The device would be
left unconnected, and could not possibly work.

Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.

Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Markus Armbruster
efec3dd631 qdev: Replace no_user by cannot_instantiate_with_device_add_yet
In an ideal world, machines can be built by wiring devices together
with configuration, not code.  Unfortunately, that's not the world we
live in right now.  We still have quite a few devices that need to be
wired up by code.  If you try to device_add such a device, it'll fail
in sometimes mysterious ways.  If you're lucky, you get an
unmysterious immediate crash.

To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad.  The device model is still omitted from
help, but is available anyway.

Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.

This commit clarifies no_user's purpose.  Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy.  While there, make it
bool.

Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale.  The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.

With that done, the regression fix is hopefully acceptable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Michael S. Tsirkin
83d08f2673 pc: map PCI address space as catchall region for not mapped addresses
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2013-12-10 12:29:56 +02:00
Cole Robinson
04c7d8b8de Fix pc migration from qemu <= 1.5
The following commit introduced a migration incompatibility:

commit 568f0690fd
Author: David Gibson <david@gibson.dropbear.id.au>
Date:   Thu Jun 6 18:48:49 2013 +1000

    pci: Replace pci_find_domain() with more general pci_root_bus_path()

The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to
0000:00.0/I440FX. Unfortunately we are stuck with the breakage for
1.6 machine types.

Add a compat property to maintain the busted idstr for the 1.6 machine
types, but revert to the old style format for 1.7+, and <= 1.5.

Tested with migration from qemu 1.5, qemu 1.6, and qemu.git.

Cc: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-10 12:08:37 +02:00
Michael S. Tsirkin
277e9340e6 piix: APIs for pc guest info
This adds APIs that will be used to fill in guest acpi tables.
Some required information is still lacking in QOM, so we
fall back on lookups by type and returning explicit types.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:52 +03:00
Michael S. Tsirkin
2028fdf379 piix: use 64 bit window programmed by guest
Detect the 64 bit window programmed by firmware
and configure properties accordingly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15 11:49:50 +03:00
Michael S. Tsirkin
1466cef32d pc: fix regression for 64 bit PCI memory
commit 3984890181
    pc: limit 64 bit hole to 2G by default
introduced a way for management to control
the window allocated to the 64 bit PCI hole.

This is useful, but existing management tools do not know how to set
this property.  As a result, e.g. specifying a large ivshmem device with
size > 4G is broken by default.  For example this configuration no
longer works:

-device ivshmem,size=4294967296,chardev=cfoo
-chardev socket,path=/tmp/sock,id=cfoo,server,nowait

Fix this by detecting that hole size was not specified
and defaulting to the backwards-compatible value of 1 << 62.

Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-27 10:13:41 +03:00
Igor Mammedov
3984890181 pc: limit 64 bit hole to 2G by default
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.

Examples:
-global i440FX-pcihost.pci-hole64-size=4G

-global q35-pcihost.pci-hole64-size=4G

Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:34 -05:00
Igor Mammedov
44fc8c5e74 pc: replace i440fx_common_init() with i440fx_init()
It isn't used anywhere else.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-4-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:32 -05:00
Igor Mammedov
1d0d4aa412 pc: add I440FX QOM cast macro
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-3-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:33:32 -05:00
Hu Tao
a3560fbf01 i440fx-pcihost: Use QOM realize for i440fx-pcihost
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:34 +02:00
Hu Tao
2aedfa4649 i440fx: Use type-safe cast instead of direct access of parent dev
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Converted remaining accesses and renamed to parent_obj]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:34 +02:00
Anthony Liguori
dc11549ec2 pci,misc enhancements
This includes some pci enhancements:
 
 Better support for systems with multiple PCI root buses
 FW cfg interface for more robust pci programming in BIOS
 Minor fixes/cleanups for fw cfg and cross-version migration -
     because of dependencies with other patches
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
 gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
 PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
 nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
 aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
 2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
 =gxxc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,misc enhancements

This includes some pci enhancements:

Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
    because of dependencies with other patches

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: Fold host_buses list into PCIHostState functionality
  pci: Remove domain from PCIHostBus
  pci: Simpler implementation of primary PCI bus
  pci: Add root bus parameter to pci_nic_init()
  pci: Add root bus argument to pci_get_bus_devfn()
  pci: Replace pci_find_domain() with more general pci_root_bus_path()
  pci: Use helper to find device's root bus in pci_find_domain()
  pci: Abolish pci_find_root_bus()
  pci: Move pci_read_devaddr to pci-hotplug-old.c
  pci: Cleanup configuration for pci-hotplug.c
  pvpanic: fix fwcfg for big endian hosts
  pvpanic: initialization cleanup
  MAINTAINERS: s/Marcelo/Paolo/
  e1000: cleanup process_tx_desc
  pc_piix: cleanup init compat handling
  pc: pass PCI hole ranges to Guests
  pci: store PCI hole ranges in guestinfo structure
  range: add Range structure

Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-08 08:00:23 -05:00
David Gibson
568f0690fd pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus).  The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.

This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string.  The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform.  When no callback is
available we fall back on the qbus name.

Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless.  The exception
is pci_get_dev_path(), whose results form part of migration streams.  To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).

For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges).  Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.

Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
Paolo Bonzini
40c5dce99b hw/p*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini
3cd2cf4375 pam: pass device to init_pam and use it to set owner
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:47 +02:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Paolo Bonzini
c0907c9e64 hw: move PCI bridges to hw/pci-* or hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00