The array returned by qemu_allocate_irqs is malloced, free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The device tree blob returned by load_device_tree is malloced.
Free it before returning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The array returned by qemu_allocate_irqs is malloced, free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Currently, isa-superio.c is always compiled as soon as CONFIG_ISA_BUS
is enabled. But there are also machines that have an ISA BUS without
any of the superio chips attached to it, so we should not compile
isa-superio.c in case we only compile a QEMU for such a machine.
Thus add a proper CONFIG_ISA_SUPERIO switch so that this file only gets
compiled when we really, really need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The POWER8 PowerNV machine needs to implement a XICSFabric interface
as this is the POWER8 interrupt controller model. But the POWER9
machine uselessly inherits of XICSFabric from the common PowerNV
machine definition.
Open code machine definitions to have a better control on the
different interfaces each machine should define.
Fixes: f30c843ced ("ppc/pnv: Introduce PowerNV machines with fixed CPU models")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191003143617.21682-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This method is used to set up the interrupt backends for the current
configuration. However, this means some confusing redirection between
the "dual" mode init and the init hooks for xics only and xive only modes.
Since we now have simple flags indicating whether XICS and/or XIVE are
supported, it's easier to just open code each initialization directly in
spapr_irq_init(). This will also make some future cleanups simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Explicitly return success or failure, rather than just relying on the
Error ** parameter. This makes handling it less verbose in the caller.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
SpaprIrq::ov5 stores the value for a particular byte in PAPR option vector
5 which indicates whether XICS, XIVE or both interrupt controllers are
available. As usual for PAPR, the encoding is kind of overly complicated
and confusing (though to be fair there are some backwards compat things it
has to handle).
But to make our internal code clearer, have SpaprIrq encode more directly
which backends are available as two booleans, and derive the OV5 value from
that at the point we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_xive_irq_claim() returns a bool to indicate if it succeeded.
But most of the callers and one callee use int return values and/or an
Error * with more information instead. In any case, ints are a more
common idiom for success/failure states than bools (one never knows
what sense they'll be in).
So instead change to an int return value to indicate presence of error
+ an Error * to describe the details through that call chain.
It also didn't actually check if the irq was already claimed, which is
one of the primary purposes of the claim path, so do that.
spapr_xive_irq_free() also returned a bool... which no callers checked
and was always true, so just drop it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The irq claim and free paths for both XICS and XIVE check for some
validity conditions. Some of these represent genuine runtime failures,
however others - particularly checking that the basic irq number is in a
sane range - could only fail in the case of bugs in the callin code.
Therefore use assert()s instead of runtime failures for those.
In addition the non backend-specific part of the claim/free paths should
only be used for PAPR external irqs, that is in the range SPAPR_XIRQ_BASE
to the maximum irq number. Put assert()s for that into the top level
dispatchers as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_irq_free() can be used to free multiple irqs at once. That's useful
for its callers, but there's no need to make the individual backend hooks
handle this. We can loop across the irqs in spapr_irq_free() itself and
have the hooks just do one at time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These traces contain some useless information (the always-0 source#) and
have no equivalents for XIVE mode. For now just remove them, and we can
put back something more sensible if and when we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This method is used to determine the name of the irq backend's node in the
device tree, so that we can find its phandle (after SLOF may have modified
it from the phandle we initially gave it).
But, in the two cases the only difference between the node name is the
presence of a unit address. Searching for a node name without considering
unit address is standard practice for the device tree, and
fdt_subnode_offset() will do exactly that, making this method unecessary.
While we're there, remove the XICS_NODENAME define. The name
"interrupt-controller" is required by PAPR (and IEEE1275), and a bunch of
places assume it already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently spapr_qirq(), whic is used to find the qemu_irq for an spapr
global irq number, redirects through the SpaprIrq::qirq method. But
the array of qemu_irqs is allocated in the PAPR layer, not the
backends, and so the method implementations all return the same thing,
just differing in the preliminary checks they make.
So, we can remove the method, and just implement spapr_qirq() directly,
including all the relevant checks in one place. We change all those
checks into assert()s as well, since a failure here indicates an error in
the calling code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
spapr global irq numbers are different from the source numbers on the ICS
when using XICS - they're offset by XICS_IRQ_BASE (0x1000). But
spapr_irq_set_irq_xics() was passing through the global irq number to
the ICS code unmodified.
We only got away with this because of a counteracting bug - we were
incorrectly adjusting the qemu_irq we returned for a requested global irq
number.
That approach mostly worked but is very confusing, incorrectly relies on
the way the qemu_irq array is allocated, and undermines the intention of
having the global array of qemu_irqs for spapr have a consistent meaning
regardless of irq backend.
So, fix both set_irq and qemu_irq indexing. We rename some parameters at
the same time to make it clear that they are referring to spapr global
irq numbers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The only reason this parameter was needed was to work around the
inconsistent meaning of nr_irqs between xics and xive. Now that we've
fixed that, we can consistently use the number directly in the SpaprIrq
configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Both the XICS and XIVE interrupt backends have a "nr-irqs" property, but
it means slightly different things. For XICS (or, strictly, the ICS) it
indicates the number of "real" external IRQs. Those start at XICS_IRQ_BASE
(0x1000) and don't include the special IPI vector. For XIVE, however, it
includes the whole IRQ space, including XIVE's many IPI vectors.
The spapr code currently doesn't handle this sensibly, with the
nr_irqs value in SpaprIrq having different meanings depending on the
backend. We fix this by renaming nr_irqs to nr_xirqs and making it
always indicate just the number of external irqs, adjusting the value
we pass to XIVE accordingly. We also move to using common constants
in most of the irq configurations, to make it clearer that the IRQ
space looks the same to the guest (and emulated devices), even if the
backend is different.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with
the result, so we might as well just fold that into the helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No point having a two-line helper that's used exactly once, and not likely
to be used anywhere else in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We create a subtype of TYPE_ICS specifically for sPAPR. For now all this
does is move the setup of the PAPR specific hcalls and RTAS calls to
the realize() function for this, rather than requiring the PAPR code to
explicitly call xics_spapr_init(). In future it will have some more
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
TYPE_ICS_SIMPLE is the only subtype of TYPE_ICS_BASE that's ever
instantiated. The existence of different classes is mostly a hang
over from when we (misguidedly) had separate subtypes for the KVM and
non-KVM version of the device.
There could be some call for an abstract base type for ICS variants
that use a different representation of their state (PowerNV PHB3 might
want this). The current split isn't really in the right place for
that though. If we need this in future, we can re-implement it more
in line with what we actually need.
So, collapse the two classes together into just TYPE_ICS.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently TYPE_XICS_BASE and TYPE_XICS_SIMPLE have their own reset methods,
using the standard technique for having the subtype call the supertype's
methods before doing its own thing.
But TYPE_XICS_SIMPLE is the only subtype of TYPE_XICS_BASE ever
instantiated, so there's no point having the split here. Merge them
together into just an ics_reset() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
There are a number of ics_simple_*() functions that aren't actually
specific to TYPE_XICS_SIMPLE at all, and are equally valid on
TYPE_XICS_BASE. Rename them to ics_*() accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently ics_reject(), ics_resend() and ics_eoi() indirect through
class methods. But there's only one implementation of each method,
the one in TYPE_ICS_SIMPLE. TYPE_ICS_BASE has no implementation, but
it's never instantiated, and has no other subtypes.
So clean up by eliminating the method and just having ics_reject(),
ics_resend() and ics_eoi() contain the logic directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
When vCPUs are hotplugged, they are added to the QEMU CPU list before
being fully realized. This can crash the XIVE presenter because the
'tctx' pointer is not necessarily initialized when looking for a
matching target.
These vCPUs are not valid targets for the presenter. Skip them.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191001085722.32755-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The ibm,client-architecture-support call is a way for the guest to
negotiate capabilities with a hypervisor. It is implemented as:
- the guest calls SLOF via client interface;
- SLOF calls QEMU (H_CAS hypercall) with an options vector from the guest;
- QEMU returns a device tree diff (which uses FDT format with
an additional header before it);
- SLOF walks through the partial diff tree and updates its internal tree
with the values from the diff.
This changes QEMU to simply re-render the entire tree and send it as
an update. SLOF can handle this already mostly, [1] is needed before this
can be applied. This stores the resulting tree in the spapr machine to have
the latest valid FDT copy possible (this should not matter much as
H_UPDATE_DT happens right after that but nevertheless).
The benefit is reduced code size as there is no need for another set of
DT rendering helpers such as spapr_fixup_cpu_dt().
The downside is that the updates are bigger now (as they include all
nodes and properties) but the difference on a '-smp 256,threads=1' system
before/after is 2.35s vs. 2.5s.
[1] https://patchwork.ozlabs.org/patch/1152915/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU does not allocate PCI resources (BARs) in any case - coldplug devices
are configured by the firmware and hotplug devices rely on the guest
system to do the assignment via the PCI rescan mechanism. Also in order
to create non empty "assigned-addresses", the device has to be enabled
(i.e. PCI_COMMAND needs the MMIO bit set) first as otherwise
io_regions[i].addr are -1, and devices are not enabled at this point.
This removes "assigned-addresses" and leaves it to those who actually
do resource allocation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190927022651.71642-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to use spapr_build_fdt() for the boot time FDT and as an
update for SLOF during handling of H_CAS. SLOF will apply all properties
from the QEMU's FDT which is usually ok unless there are properties
changed by grub or guest kernel. The properties are:
bootargs, linux,initrd-start, linux,initrd-end, linux,stdout-path,
linux,rtas-base, linux,rtas-entry. Resetting those during CAS will most
likely cause grub failure.
Don't create such properties if we're booting without "-kernel" and
"-initrd" so they won't get included into the DT update blob and
therefore the guest is more likely to boot successfully.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Tweaked commit message based on Greg Kurz's input]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree build by QEMU at the machine reset time is used by SLOF
to build its internal device tree but the node names are not preserved
exactly so when QEMU provides a device tree update in response to H_CAS,
it might become tricky to match a node from the update blob to
the actual node in SLOF.
This removed leading zeroes from "memory@" nodes and makes
the DTC checker happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Add a missing g_free(fdt) if the resulting tree is bigger
than the space allocated by SLOF.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The number of NUMA nodes in the system is fixed from the command line.
Therefore, there's no need to recalculate it at reset time, and we can
determine the special gpu_numa_id value used for NVLink2 devices at init
time.
This simplifies the reset path a bit which will make further improvements
easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Certain old guest versions don't understand the radix MMU introduced with
POWER ISA 3.0, but incorrectly select it if presented with the option at
CAS time. We workaround this in qemu by explicitly excluding the radix
(and other ISA 3.0 linked) options if the guest doesn't explicitly note
support for ISA 3.0.
This is handled by the 'cas_legacy_guest_workaround' flag, which is pretty
vague. Rename it to 'cas_pre_isa3_guest' to be clearer about what it's for.
In addition, we unnecessarily call spapr_populate_pa_features() with
different options when initially constructing the device tree and when
adjusting it at CAS time. At the initial construct time cas_pre_isa3_guest
is already false, so we can still use the flag, rather than explicitly
overriding it to be false at the callsite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
A typical pseries VM with 16 vCPUs, one disk, one network adapater
uses less than 100 interrupts but the whole IRQ number space of the
QEMU machine is allocated at reset time and it is 8K wide. This is
wasting a considerable amount of interrupt numbers in the global IRQ
space which has 1M interrupts per socket on a POWER9.
To optimise the HW resources, only request at the KVM level interrupts
which have been claimed by the guest. This will help to increase the
maximum number of VMs per system and also help supporting nested guests
using the XIVE interrupt mode.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190911133937.2716-3-clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156942766014.1274533.10792048853177121231.stgit@bahia.lan>
[dwg: Folded in fix up from Greg Kurz]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will help us to discard interrupt numbers which have not been
claimed in the next patch.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190911133937.2716-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
add PnvHomer device model to emulate homer memory access
for pstate table, occ-sensors, slw, occ static and dynamic
values for Power8 and Power9 chips.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-4-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
emulate occ common area region with occ sram device model which
occ and skiboot uses it to communicate regarding sensors, slw
and HWMON in PowerNV emulated host.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-3-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During PowerNV boot skiboot populates the device tree by
retrieving base address of homer/occ common area from
PBA BARs and prd ipoll mask by accessing xscom read/write
accesses.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-2-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unless the machine was started with kernel-irqchip=on, we cannot easily
tell if we're actually using an in-kernel or an emulated irqchip. This
information is important enough that it is worth printing it in 'info
pic'.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156829860985.2073005.5893493824873412773.stgit@bahia.tls.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were few trailing comments after `/*` instead in
new line and line more than 80 character, these fixes are
trivial and doesn't change any logic in code.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190911142925.19197-5-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity is reporting in CID 1405304 that tpm_execute() may pass a NULL
tpm_proxy->host_path pointer to open(). This is based on the fact that
h_tpm_comm() does a NULL check on tpm_proxy->host_path and then passes
tpm_proxy to tpm_execute().
The check in h_tpm_comm() is abusive actually since a spapr-proxy-tpm
requires a non NULL host_path property, as checked during realize.
Fixes: 0fb6bd0732
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156805260916.1779401.11054185183758185247.stgit@bahia.lan>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes the dtc output :
ERROR (node_name_chars): //bmc: Bad character '/' in node name
Warning (avoid_unnecessary_addr_size): /bmc: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190902092932.20200-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When we hotplug a CPU on memory-less/cpu-less node, the linux kernel
crashes.
This happens because linux kernel needs to know the NUMA topology at
start to be able to initialize the distance lookup table.
On pseries, the topology is provided by the firmware via the existing
CPUs and memory information. Thus a node without memory and CPU cannot be
discovered by the kernel.
To avoid the kernel crash, do not allow to start pseries with empty
nodes.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190830161345.22436-1-lvivier@redhat.com>
[dwg: Rework to cope with movement of numa state from globals to MachineState]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both, "rom->addr" and "addr" are derived from the binary image
that can be loaded with the "-kernel" paramer. The code in
rom_copy() then calculates:
d = dest + (rom->addr - addr);
and uses "d" as destination in a memcpy() some lines later. Now with
bad kernel images, it is possible that rom->addr is smaller than addr,
thus "rom->addr - addr" gets negative and the memcpy() then tries to
copy contents from the image to a bad memory location. This could
maybe be used to inject code from a kernel image into the QEMU binary,
so we better fix it with an additional sanity check here.
Cc: qemu-stable@nongnu.org
Reported-by: Guangming Liu
Buglink: https://bugs.launchpad.net/qemu/+bug/1844635
Message-Id: <20190925130331.27825-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity currently complains that the "if (0x00 & (0x80 >> (phase - 8))"
in next-cube.c can never be true. Right it is. The "0x00" is meant as value
of the control register of the RTC, which is currently not implemented yet.
Thus, let's add a register variable for this now. However, the RTC
registers are currently defined as static variables in nextscr2_write(),
which is quite ugly. Thus let's also move the RTC variables to the main
machine state instead. In the long run, we should likely even refactor
the whole RTC code into a separate device in a separate file, but that's
something for calm winter nights later... as a first step, cleaning up
the static variables and shutting up the warning from Coverity should
be sufficient.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190921091738.26953-1-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
s390 was trying to solve limited KVM memslot size issue by abusing
memory_region_allocate_system_memory(), which breaks API contract
where the function might be called only once.
Beside an invalid use of API, the approach also introduced migration
issue, since RAM chunks for each KVM_SLOT_MAX_BYTES are transferred in
migration stream as separate RAMBlocks.
After discussion [1], it was agreed to break migration from older
QEMU for guest with RAM >8Tb (as it was relatively new (since 2.12)
and considered to be not actually used downstream).
Migration should keep working for guests with less than 8TB and for
more than 8TB with QEMU 4.2 and newer binary.
In case user tries to migrate more than 8TB guest, between incompatible
QEMU versions, migration should fail gracefully due to non-exiting
RAMBlock ID or RAMBlock size mismatch.
Taking in account above and that now KVM code is able to split too
big MemorySection into several memslots, partially revert commit
(bb223055b s390-ccw-virtio: allow for systems larger that 7.999TB)
and use kvm_set_max_memslot_size() to set KVMSlot size to
KVM_SLOT_MAX_BYTES.
1) [PATCH RFC v2 4/4] s390: do not call memory_region_allocate_system_memory() multiple times
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-5-imammedo@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Return the correct error code when the SCCB buffer is too small to
contain all of the output, for the Read SCP Information and
Read CPU Information commands.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-5-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Requests over 4k are not a spec exception.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-4-git-send-email-imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sclp codes need to be checked for page boundary violations.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-3-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Invalid command checking has to be done before the boundary check,
refactoring it now allows to insert the boundary check at the correct
place later.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-2-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The fix in dbe9cf606c shrinks the IOMMU memory region to a size
that seems reasonable on the surface, however is actually too
small as it is based against a 0-mapped address space. This
causes breakage with small guests as they can overrun the IOMMU window.
Let's go back to the prior method of initializing iommu for now.
Fixes: dbe9cf606c ("s390x/pci: Set the iommu region size mpcifc request")
Cc: qemu-stable@nongnu.org
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reported-by: Stefan Zimmerman <stzi@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <1569507036-15314-1-git-send-email-mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----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=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
IEC binary prefixes ease code review: the unit is explicit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190923131108.21459-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're booting a Linux kernel directly into Non-Secure
state on a CPU which has Secure state, then make sure we
set the NSACR CP11 and CP10 bits, so that Non-Secure is allowed
to access the FPU. Otherwise an AArch32 kernel will UNDEF as
soon as it tries to use the FPU.
It used to not matter that we didn't do this until commit
fc1120a7f5, where we implemented actually honouring
these NSACR bits.
The problem only exists for CPUs where EL3 is AArch32; the
equivalent AArch64 trap bits are in CPTR_EL3 and are "0 to
not trap, 1 to trap", so the reset value of the register
permits NS access, unlike NSACR.
Fixes: fc1120a7f5
Fixes: https://bugs.launchpad.net/qemu/+bug/1844597
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190920174039.3916-1-peter.maydell@linaro.org
With the merge of notdirty handling into store_helper,
the last user of cpu->mem_io_vaddr was removed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using memcmp to compare structures wasn't safe,
as I found out on ARM when I was getting falce miscompares.
Use the helper function for comparing the MRSs.
Fixes: ade6d081fc ("vhost: Regenerate region list from changed sections list")
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190814175535.2023-4-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some toolstack implementations will set the frontend xenstore
keys to Initialising which will then trigger the in guest PV
drivers to begin initialising and some implementations will
then set their state to Closing. If this has occurred then
device realize must not overwrite the frontend keys as then
the handshake will stall.
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Also avoid creating the frontend area if it already exists.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190918115745.39006-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
When a frontend gracefully disconnects from an offline backend, it will
set its own state to XenbusStateClosed. The code in xen-block.c correctly
deals with this and sets the backend into XenbusStateClosed. Unfortunately
it is possible for toolstack to actually delete the frontend area
before the state key has been read, leading to an apparent frontend state
of XenbusStateUnknown. This prevents the backend state from transitioning
to XenbusStateClosed and hence leaves it limbo.
This patch simply treats a frontend state of XenbusStateUnknown the same
as XenbusStateClosed, which will unblock the backend in these circumstances.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20190918115702.38959-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Cleaning up offline XenDevice objects directly in
xen_device_backend_changed() is dangerous as xen_device_unrealize() will
modify the watch list that is being walked. Even the QLIST_FOREACH_SAFE()
used in notifier_list_notify() is insufficient as *two* notifiers (for
the frontend and backend watches) are removed, thus potentially rendering
the 'next' pointer unsafe.
The solution is to use the XenBus backend_watch handler to do the clean-up
instead, as it is invoked whilst walking a separate watch list.
This patch therefore adds a new 'inactive_devices' list to XenBus, to which
offline devices are added by xen_device_backend_changed(). The XenBus
backend_watch registration is also changed to not only invoke
xen_bus_enumerate() but also a new xen_bus_cleanup() function, which will
walk 'inactive_devices' and perform the necessary actions.
For safety an extra 'online' check is also added to xen_bus_type_enumerate()
to make sure that no attempt is made to create a new XenDevice object for a
backend that is offline.
NOTE: This patch also includes some cosmetic changes:
- substitute the local variable name 'backend_state'
in xen_bus_type_enumerate() with 'state', since there
is no ambiguity with any other state in that context.
- change xen_device_state_is_active() to
xen_device_frontend_is_active() (and pass a XenDevice directly)
since the state tests contained therein only apply to a frontend.
- use 'state' rather then 'xendev->backend_state' in
xen_device_backend_changed() to shorten the code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-4-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch uses the XenWatchList abstraction to add a separate watch list
for each device. This is more scalable than walking a single notifier
list for all watches and is also necessary to implement a bug-fix in a
subsequent patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-3-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Xenstore watch call-backs are already abstracted away from XenBus using
the XenWatch data structure but the associated NotifierList manipulation
and file handle registration is still open coded in various xen_bus_...()
functions.
This patch creates a new XenWatchList data structure to allow these
interactions to be abstracted away from XenBus as well. This is in
preparation for a subsequent patch which will introduce separate watch lists
for XenBus and XenDevice objects.
NOTE: This patch also introduces a new notifier_list_empty() helper function
for the purposes of adding an assertion that a XenWatchList is not
freed whilst its associated NotifierList is still occupied.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-2-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...not the backend
Commit cb323146 "xen-bus: Fix backend state transition on device reset"
contained a subtle mistake. The hunk
@@ -539,11 +556,11 @@ static void xen_device_backend_changed(void *opaque)
/*
* If the toolstack (or unplug request callback) has set the backend
- * state to Closing, but there is no active frontend (i.e. the
- * state is not Connected) then set the backend state to Closed.
+ * state to Closing, but there is no active frontend then set the
+ * backend state to Closed.
*/
if (xendev->backend_state == XenbusStateClosing &&
- xendev->frontend_state != XenbusStateConnected) {
+ !xen_device_state_is_active(state)) {
xen_device_backend_set_state(xendev, XenbusStateClosed);
}
mistakenly replaced the check of 'xendev->frontend_state' with a check
(now in a helper function) of 'state', which actually equates to
'xendev->backend_state'.
This patch fixes the mistake.
Fixes: cb32314607
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190910171753.3775-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
- gen15a is called z15
- officially require a 3.15 kernel or later for kvm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ALS2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20190923' into staging
- bugfixes in ccw bios
- gen15a is called z15
- officially require a 3.15 kernel or later for kvm
# gpg: Signature made Mon 23 Sep 2019 08:18:32 BST
# gpg: using RSA key 117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" [full]
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20190923:
s390x/cpumodel: Add the z15 name to the description of gen15a
s390x/kvm: Officially require at least kernel 3.15
pc-bios/s390-ccw: Rebuild the s390-netboot.img firmware image
pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()
pc-bios/s390-ccw: Do not pre-initialize empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
-----BEGIN PGP SIGNATURE-----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=lCyp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/ipmi-for-release-2019-09-20' into staging
ipmi: Some bug fixes and new interfaces
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
# gpg: Signature made Fri 20 Sep 2019 20:11:21 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/ipmi-for-release-2019-09-20:
pc: Add an SMB0 ACPI device to q35
ipmi: Fix SSIF ACPI handling to use the right CRS
acpi: Add i2c serial bus CRS handling
ipmi: Add an SMBus IPMI interface
ipmi: Add PCI IPMI interfaces
smbios:ipmi: Ignore IPMI devices with no fwinfo function
ipmi: Allow a size value to be passed for I/O space
ipmi: Split out BT-specific code from ISA BT code
ipmi: Split out KCS-specific code from ISA KCS code
ipmi: Add a UUID device property
qdev: Add a no default uuid property
tests:ipmi: Fix IPMI BT tests
ipmi: Generate an interrupt on watchdog pretimeout expiry
ipmi: Fix the get watchdog command
ipmi: Fix watchdog NMI handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since QEMU v2.10, the KVM acceleration does not work on older kernels
anymore since the code accidentally requires the KVM_CAP_DEVICE_CTRL
capability now - it should have been optional instead.
Instead of fixing the bug, we asked in the ChangeLog of QEMU 2.11 - 3.0
that people should speak up if they still need support of QEMU running
with KVM on older kernels, but seems like nobody really complained.
Thus let's make this official now and turn it into a proper error
message, telling the users to use at least kernel 3.15 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190913091443.27565-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is so I2C devices can be found in the ACPI namespace. Currently
that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself
to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable
of handling an SMBus device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Pass in the CRS so that it can be set to the SMBus for IPMI later.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This will be required for getting IPMI SSIF (SMBus interface) into
the ACPI tables.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Not all devices have fwinfo (like the coming PCI one), so ignore
them if the their fwinfo function is NULL.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
PCI device I/O must be >= 8 bytes in length or they don't work.
Allow the size to be passed in, the default size of 2 or 3
won't work.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Get ready for PCI and other BT interfaces.
No functional changes, just split the code into generic BT code
and ISA-specific BT code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Get ready for PCI and other KCS interfaces.
No functional changes, just split the code into the generic KCS code
and the ISA-specific code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Using the UUID that qemu generates probably isn't the best thing
to do, allow it to be passed in via properties, and use QemuUUID
for the type.
If the UUID is not set, return an unsupported command error. This
way we are not providing an all-zero (or randomly generated) GUID
to the IPMI user. This lets the host fall back to the other
method of using the get device id command to determind the BMC
being accessed.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Add the watchdog pretimeout to the bits that cause an interrupt on attn.
Otherwise the user won't know.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It wasn't returning the set timeout like it should have been.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The wrong logic was used for detection (so it wouldn't work at all)
and the wrong interface was used to inject the NMI if the detection
logic was correct.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:
* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.
This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.
This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.
Changes since v2 (never made it to the list):
* Sets the sifive_u machine default core count to 2 instead of 5.
Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:
* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.
-----BEGIN PGP SIGNATURE-----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=yDSj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf1-v3' into staging
RISC-V Patches for the 4.2 Soft Freeze, Part 1, v3
This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:
* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.
This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.
This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.
Changes since v2 (never made it to the list):
* Sets the sifive_u machine default core count to 2 instead of 5.
Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:
* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.
# gpg: Signature made Tue 17 Sep 2019 16:43:30 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-sf1-v3: (48 commits)
gdbstub: riscv: fix the fflags registers
target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point
target/riscv: Fix mstatus dirty mask
target/riscv: Use both register name and ABI name
riscv: sifive_u: Update model and compatible strings in device tree
riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
riscv: sifive_u: Fix broken GEM support
riscv: sifive_u: Instantiate OTP memory with a serial number
riscv: sifive: Implement a model for SiFive FU540 OTP
riscv: roms: Update default bios for sifive_u machine
riscv: sifive_u: Change UART node name in device tree
riscv: sifive_u: Update UART base addresses and IRQs
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
riscv: sifive_u: Add PRCI block to the SoC
riscv: sifive_u: Generate hfclk and rtcclk nodes
riscv: sifive: Implement PRCI model for FU540
riscv: sifive_u: Update PLIC hart topology configuration string
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
riscv: sifive_u: Set the minimum number of cpus to 2
riscv: hart: Add a "hartid-base" property to RISC-V hart array
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes sure reads are confined to vga video memory.
v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.
Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a trace point which prints every loaded image. This includes
bios/firmware/kernel/initradmdisk/pcirom.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613050937.124903-1-aik@ozlabs.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This updates model and compatible strings to use the same strings
as used in the Linux kernel device tree (hifive-unleashed-a00.dts).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In the past we did not have a model for PRCI, hence two handcrafted
clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
purpose of supplying hard-coded clock frequencies. But now since we
have added the PRCI support in QEMU, we don't need them any more.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.
Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().
Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.
Tested with upstream U-Boot and Linux kernel MACB drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This implements a simple model for SiFive FU540 OTP (One-Time
Programmable) Memory interface, primarily for reading out the
stored serial number from the first 1 KiB of the 16 KiB OTP
memory reserved by SiFive for internal use.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating
chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will
use this information to locate the serial node and probe its driver.
However currently we generate the UART node name as "/soc/uart@...",
causing U-Boot fail to find the serial node in DT.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This updates the UART base address and IRQs to match the hardware.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Now that we have added a PRCI node, update existing UART and ethernet
nodes to reference PRCI as their clock sources, to keep in sync with
the Linux kernel device tree.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add PRCI mmio base address and size mappings to sifive_u machine,
and generate the corresponding device tree node.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
To keep in sync with Linux kernel device tree, generate hfclk and
rtcclk nodes in the device tree, to be referenced by PRCI node.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds a simple PRCI model for FU540 (sifive_u). It has different
register layout from the existing PRCI model for FE310 (sifive_e).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
With heterogeneous harts config, the PLIC hart topology configuration
string are "M,MS,.." because of the monitor hart #0.
Suggested-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54
RISC-V cores. Currently the sifive_u machine only populates 4 U54
cores. Update the max cpu number to 5 to reflect the real hardware,
by creating 2 CPU clusters as containers for RISC-V hart arrays to
populate heterogeneous harts.
The cpu nodes in the generated DTS have been updated as well.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
It is not useful if we only have one management CPU.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Set default CPUs to 2]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At present each hart's hartid in a RISC-V hart array is assigned
the same value of its index in the hart array. But for a system
that has multiple hart arrays, this is not the case any more.
Add a new "hartid-base" property so that hartid number can be
assigned based on the property value.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently riscv_harts_realize() creates all harts based on the
same cpu type given in the hart array property. With current
implementation it can only create homogeneous harts. Exact the
hart realize to a separate routine in preparation for supporting
multiple hart arrays.
Note the file header says the RISC-V hart array holds the state
of a heterogeneous array of RISC-V harts, which is not true.
Update the comment to mention homogeneous array of RISC-V harts.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use create_unimplemented_device() instead.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently the PRCI register block size is set to 0x8000, but in fact
0x1000 is enough, which is also what the manual says.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For hfxosccfg register programming, SIFIVE_E_PRCI_HFXOSCCFG_RDY and
SIFIVE_E_PRCI_HFXOSCCFG_EN should be used.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Current SiFive PRCI model only works with sifive_e machine, as it
only emulates registers or PRCI block in the FE310 SoC.
Rename the file name to make it clear that it is for sifive_e.
This also prefix "sifive_e"/"SIFIVE_E" for all macros, variables
and functions.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
sifive_u machine does not use PRCI as of today. Remove the prci
header inclusion.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The inclusion of "target/riscv/cpu.h" is unnecessary in various
sifive model drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Replace the call to hw_error() with qemu_log_mask(LOG_GUEST_ERROR,...)
in various sifive models.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
There is no need to return fdt at the end of create_fdt() because
it's already saved in s->fdt.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This removes "reg-names" and "riscv,max-priority" properties of the
PLIC node from device tree.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Some of the properties only have 1 cell so we should use
qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
"linux,phandle" property is optional. Remove all instances in the
sifive_u, virt and spike machine device trees.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Commit a27bd6c779 ("Include hw/qdev-properties.h less") wrongly
added "hw/hw.h" to sifive_prci.c and sifive_test.c.
Another inclusion of "hw/hw.h" was later added via
commit 650d103d3e ("Include hw/hw.h exactly where needed"), that
resulted in duplicated inclusion of "hw/hw.h".
Fixes: a27bd6c779 ("Include hw/qdev-properties.h less")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds a reset opcode for sifive_test device to trigger a system
reset for testing purpose.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At present when "-bios image" is supplied, we just use the straight
path without searching for the configured data directories. Like
"-bios default", we add the same logic so that "-L" actually works.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds a helper routine for finding firmware. It is currently
used only for "-bios default" case.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The correct property name is clock-names, not clocks-names.
Without this patch, the Ethernet driver fails to instantiate with
the following error.
macb 100900fc.ethernet: failed to get macb_clk (-2)
macb: probe of 100900fc.ethernet failed with error -2
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The riscv uart needs valid clocks. This requires a refereence
to the clock node. Since the SOC clock is not emulated by qemu,
add a reference to a fixed clock instead. The clock-frequency
entry in the uart node does not seem to be necessary, so drop it.
In addition to a reference to the clock, the driver also needs
an aliases entry for the serial node. Add it as well.
Without this patch, the serial driver fails to instantiate with
the following error message.
sifive-serial 10013000.uart: unable to find controller clock
sifive-serial: probe of 10013000.uart failed with error -2
when trying to boot Linux.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add support for loading initrd with "-initrd <filename>"
to the sifive_u machine. This lets us boot into Linux without
disk drive.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Implement the modern (v2) personality, according to the VirtIO 1.0
specification.
Support for v2 among guests is not as widespread as it'd be
desirable. While the Linux driver has had it for a while, support is
missing, at least, from Tianocore EDK II, NetBSD and FreeBSD.
For this reason, the v2 personality is disabled, keeping the legacy
behavior as default. Machine types willing to use v2, can enable it
using MachineClass's compat_props.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20190913120559.40835-1-slp@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract all the functions that are not PC-machine specific into
the (arch-specific) fw_cfg.c file. This will allow other X86-machine
to reuse these functions.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-16-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the pc_build_feature_control_file() function has been
refactored to not depend of PC specific types, rename it to a
more generic name.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let the pc_build_feature_control_file() function take a generic MachineState
argument.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-14-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the FWCfgState object by argument, this will
allow us to remove the PCMachineState argument later.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the pc_build_smbios() function has been refactored to not
depend of PC specific types, rename it to a more generic name.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-12-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let the pc_build_smbios() function take a generic MachineState
argument.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the FWCfgState object by argument, this will
allow us to remove the PCMachineState argument later.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the previous commit we removed the last access to PCMachineState.
Replace it with a generic MachineState argument and use it to retrieve
the CPUArchIdList.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the CPUArchIdList array by argument, this will
allow us to remove the PCMachineState argument later.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the apic_id_limit value by argument, this will
allow us to remove the PCMachineState argument later.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The boot_cpus is used once. Pass it by argument, this will
allow us to remove the PCMachineState argument later.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bochs_bios_init() function is not restricted to the Bochs
BIOS and is useful to other BIOS.
Since it is not specific to the PC machine, and can be reused
by other machines of the X86 architecture, rename it as
fw_cfg_arch_create().
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The address_space_memory variable is used once.
Use it in place and remove the argument.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be able to extract the e820* code out of this file (in the next
patch), access e820_entries with its correct helper.
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That's never a good place to stop QEMU process... Since now we have
both the machine done sanity check and also the hotplug handler, we
can safely remove this to avoid that.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-5-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of bailing out when trying to hotplug a vfio-pci device with
below configuration:
-device intel-iommu,caching-mode=off
With this we can return a warning message to the user via QMP/HMP and
the VM will continue to work after failing the hotplug:
(qemu) device_add vfio-pci,bus=root.3,host=05:00.0,id=vfio1
Error: Device assignment is not allowed without enabling caching-mode=on for Intel IOMMU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-4-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce this new per-machine hook to give any machine class a chance
to do a sanity check on the to-be-hotplugged device as a sanity test.
This will be used for x86 to try to detect some illegal configuration
of devices, e.g., possible conflictions between vfio-pci and x86
vIOMMU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This check was previously only happened when the IOMMU is enabled in
the guest. It was always too late because the enabling of IOMMU
normally only happens during the boot of guest OS. It means that we
can bail out and exit directly during the guest OS boots if the
configuration of devices are not supported. Or, if the guest didn't
enable vIOMMU at all, then the user can use the guest normally but as
long as it reconfigure the guest OS to enable the vIOMMU then reboot,
the user will see the panic right after the reset when the next boot
starts.
Let's make this failure even earlier so that we force the user to use
caching-mode for vfio-pci devices when with the vIOMMU. So the user
won't get surprise at least during execution of the guest, which seems
a bit nicer.
This will affect some user who didn't enable vIOMMU in the guest OS
but was using vfio-pci and the vtd device in the past. However I hope
it's not a majority because not enabling vIOMMU with the device
attached is actually meaningless.
We still keep the old assertion for safety so far because the hotplug
path could still reach it, so far.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-2-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a possible integer overflow when we calculate
the total size of ELF segments loaded.
Reported-by: Coverity (CID 1405299)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190910124828.39794-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built
unconditionally for x86 target. Putting it in default-configs/ suggests
that it can be easily disabled, which isn't true.
Relocate the symbol with the other acpi-build.c requirements, under
'config PC'. This is similar to what is done for the arm 'virt' machine
type and CONFIG_ACPI_PCI
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Same rational as: e6cc11d64f
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
This has already been fixed for vhost scsi devices and was
recently vhost-user scsi devices. This commit fixes it for
vhost-user-blk devices.
Suggested-by: Phillippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1566498865-55506-1-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The APB frequency can be calculated directly when needed from the
HPLL_PARAM and CLK_SEL register values. This removes useless state in
the model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-11-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
and use a class AspeedSCUClass to define each SoC characteristics.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-10-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the missing checksum calculation on normal DMA transfer.
According to the datasheet this is how the SMC should behave.
Verified on AST1250 that the hardware matches the behaviour.
Signed-off-by: Christian Svensson <bluecmd@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-9-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Emulate read errors in the DMA Checksum Register for high frequencies
and optimistic settings of the Read Timing Compensation Register. This
will help in tuning the SPI timing calibration algorithm. Errors are
only injected when the property "inject_failure" is set to true as
suggested by Philippe.
The values below are those to expect from the first flash device of
the FMC controller of a palmetto-bmc machine.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190904070506.1052-8-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing calibration, the SPI clock rate in the CE0 Control Register
and the read delay cycles in the Read Timing Compensation Register are
set using bit[11:4] of the DMA Control Register.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190904070506.1052-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FMC controller on the Aspeed SoCs support DMA to access the flash
modules. It can operate in a normal mode, to copy to or from the flash
module mapping window, or in a checksum calculation mode, to evaluate
the best clock settings for reads.
The model introduces two custom address spaces for DMAs: one for the
AHB window of the FMC flash devices and one for the DRAM. The latter
is populated using a "dram" link set from the machine with the RAM
container region.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190904070506.1052-6-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Improve the naming of the different controller models to ease their
generation when initializing the SoC. The rename of the SMC types is
breaking migration compatibility.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-5-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are no QEMU Aspeed machines using the SoCs "ast2400-a0" or
"ast2400".
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-4-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC.
(Note that the ast2400 controller only goes up to group AB).
A set has four groups (except set AC which only has one) and is
referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB).
Each set is accessed and controlled by a bank of 14 registers.
These registers operate on a per pin level where each bit in the register
corresponds to a pin, except for the command source registers. The command
source registers operate on a per group level where bits 24, 16, 8 and 0
correspond to each group in the set.
eg. registers for set ABCD:
|D7...D0|C7...C0|B7...B0|A7...A0| <- GPIOs
|31...24|23...16|15....8|7.....0| <- bit position
Note that there are a couple of groups that only have 4 pins.
There are two ways that this model deviates from the behaviour of the
actual controller:
(1) The only control source driving the GPIO pins in the model is the ARM
model (as there currently aren't models for the LPC or Coprocessor).
(2) None of the registers in the model are reset tolerant (needs
integration with the watchdog).
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190904070506.1052-2-clg@kaod.org
[clg: fixed missing header files
made use of HWADDR_PRIx to fix compilation on windows ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
-----BEGIN PGP SIGNATURE-----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=W+5Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190912a' into staging
Migration pull 2019-09-12
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
# gpg: Signature made Thu 12 Sep 2019 14:48:28 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190912a:
migration: fix one typo in comment of function migration_total_bytes()
migration/qemu-file: fix potential buf waste for extra buf_index adjustment
migration/qemu-file: remove check on writev_buffer in qemu_put_compression_data
migration: Fix postcopy bw for recovery
tests/migration: Add a test for validate-uuid capability
tests/libqtest: Allow setting expected exit status
migration: Add validate-uuid capability
qemu-file: Rework old qemu_fflush comment
migration: register_savevm_live doesn't need dev
hw/net/vmxnet3: Fix leftover unregister_savevm
migration: cleanup check on ops in savevm.handlers iterations
migration: multifd_send_thread always post p->sem_sync when error happen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the MIPS CPU implementation uses the new
do_transaction_failed hook, we can remove the old code that handled
the do_unassigned_access hook.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20190802160458.25681-4-peter.maydell@linaro.org>
The MIPS Jazz ('magnum' and 'pica61') boards have some code which
overrides the CPU's do_unassigned_access hook, so they can intercept
it and not raise exceptions on data accesses to invalid addresses,
only for instruction fetches.
We want to switch MIPS over to using the do_transaction_failed
hook instead, so add an intercept for that as well, and make
the board code install whichever hook the CPU is actually using.
Once we've changed the CPU implementation we can remove the
redundant code for the old hook.
Note: I am suspicious that the behaviour as implemented here may not
be what the hardware really does. It was added in commit
54e755588c to restore the behaviour that was broken by
commit c658b94f6e. But prior to commit c658b94f6e
every MIPS board generated exceptions for instruction access to
invalid addresses but not for data accesses; and other boards,
notably Malta, were fixed by making all invalid accesses behave as
reads-as-zero (see the call to empty_slot_init() in
mips_malta_init()). Hardware that raises exceptions for instruction
access and not data access seems to me to be an unlikely design, and
it's possible that the right way to emulate this is to make the Jazz
boards do what we did with Malta (or some variation of that).
Nonetheless, since I don't have access to real hardware to test
against I have taken the approach of "make QEMU continue to behave
the same way it did before this commit". I have updated the comment
to correct the parts that are no longer accurate and note that
the hardware might behave differently.
The test case for the need for the hook-hijacking is in
https://bugs.launchpad.net/qemu/+bug/1245924 That BIOS will boot OK
either with this overriding of both hooks, or with a simple "global
memory region to ignore bad accesses of all types", so it doesn't
provide evidence either way, unfortunately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20190802160458.25681-2-peter.maydell@linaro.org>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 78dd48df3 reworked vmxnet3's live migration but left a straggling
unregister_savevm call. Remove it, although it doesn't seem to have
any bad effect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822111218.12079-1-dgilbert@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the code in hw/misc/ does not directly depend on CPU-specific
code. Mark it as "common" so that the code can be shared between e.g.
qemu-system-arm and qemu-system-aarch64, or between the various mips
flavours, instead of recompiling it for each and every target again
and again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190902162638.28142-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The NeXTcube uses a normal 8530 serial controller, so we can simply use
our normal "escc" device here.
While we're at it, also add a boot-serial-test for the next-cube machine,
now that the serial output works.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-6-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
On Sparc and PowerMac, the bit 0 of the address selects the register
type (control or data) and bit 1 selects the channel (B or A).
On m68k Macintosh and NeXTcube, the bit 0 selects the channel and
bit 1 the register type.
This patch introduces a new parameter (bit_swap) to the device interface
to indicate bits usage must be swapped between registers and channels.
For the moment all the machines use the bit 0, but this change will be
needed to emulate the Quadra 800 or NeXTcube machine.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[thh: added NeXTcube to the patch description]
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-5-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is still quite incomplete (no SCSI, no floppy emulation, no network,
etc.), but the firmware already shows up the debug monitor prompt in the
framebuffer display, so at least the very basics are already working.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-cube.c
and altered quite a bit to fit the latest interface and coding conventions
of the current QEMU.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-4-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is likely still quite incomplete (e.g. mouse and interrupts are not
implemented yet), but it is good enough for keyboard input at the firmware
monitor.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c
and altered to fit the latest interface of the current QEMU (e.g. to use
memory_region_init_io() instead of cpu_register_physical_memory()).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-3-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
-----BEGIN PGP SIGNATURE-----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=u5HZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine + x86 queue, 2019-09-03
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
# gpg: Signature made Tue 03 Sep 2019 21:57:37 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
migration: Do not re-read the clock on pre_save in case of paused guest
x86: do not advertise die-id in query-hotpluggbale-cpus if '-smp dies' is not set
i386/vmmouse: Properly reset state
hostmem-file: fix pmem file size check
qapi: report the default CPU type for each machine
pc: Don't make die-id mandatory unless necessary
pc: Improve error message when die-id is omitted
pc: Fix error message on die-id validation
numa: move numa global variable numa_info into MachineState
numa: move numa global variable have_numa_distance into MachineState
numa: move numa global variable nb_numa_nodes into MachineState
hw/arm: simplify arm_load_dtb
includes: remove stale [smp|max]_cpus externs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Revert and correctly fix refactoring of unallocated_encoding()
* Take exceptions on ATS instructions when needed
* aspeed/timer: Provide back-pressure information for short periods
* memory: Remove unused memory_region_iommu_replay_all()
* hw/arm/smmuv3: Log a guest error when decoding an invalid STE
* hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations
* target/arm: Fix SMMLS argument order
* hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate
* hw/arm: Correct reference counting for creation of various objects
* includes: remove stale [smp|max]_cpus externs
* tcg/README: fix typo
* atomic_template: fix indentation in GEN_ATOMIC_HELPER
* include/exec/cpu-defs.h: fix typo
* target/arm: Free TCG temps in trans_VMOV_64_sp()
* target/arm: Don't abort on M-profile exception return in linux-user mode
-----BEGIN PGP SIGNATURE-----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=N0jC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190903' into staging
target-arm queue:
* Revert and correctly fix refactoring of unallocated_encoding()
* Take exceptions on ATS instructions when needed
* aspeed/timer: Provide back-pressure information for short periods
* memory: Remove unused memory_region_iommu_replay_all()
* hw/arm/smmuv3: Log a guest error when decoding an invalid STE
* hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations
* target/arm: Fix SMMLS argument order
* hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate
* hw/arm: Correct reference counting for creation of various objects
* includes: remove stale [smp|max]_cpus externs
* tcg/README: fix typo
* atomic_template: fix indentation in GEN_ATOMIC_HELPER
* include/exec/cpu-defs.h: fix typo
* target/arm: Free TCG temps in trans_VMOV_64_sp()
* target/arm: Don't abort on M-profile exception return in linux-user mode
# gpg: Signature made Tue 03 Sep 2019 16:35:19 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190903: (21 commits)
target/arm: Don't abort on M-profile exception return in linux-user mode
target/arm: Free TCG temps in trans_VMOV_64_sp()
include/exec/cpu-defs.h: fix typo
atomic_template: fix indentation in GEN_ATOMIC_HELPER
tcg/README: fix typo s/afterwise/afterwards/
includes: remove stale [smp|max]_cpus externs
hw/net/xilinx_axi: Use object_initialize_child for correct ref. counting
hw/dma/xilinx_axi: Use object_initialize_child for correct ref. counting
hw/arm/fsl-imx: Add the cpu as child of the SoC object
hw/arm: Use sysbus_init_child_obj for correct reference counting
hw/arm: Use object_initialize_child for correct reference counting
hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate
target/arm: Fix SMMLS argument order
hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations
hw/arm/smmuv3: Log a guest error when decoding an invalid STE
memory: Remove unused memory_region_iommu_replay_all()
aspeed/timer: Provide back-pressure information for short periods
target/arm: Take exceptions on ATS instructions when needed
target/arm: Allow ARMCPRegInfo read/write functions to throw exceptions
target/arm: Factor out unallocated_encoding for aarch32
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using FLR becomes convenient in cases where resetting the bus is
impractical, for example, when debugging the behavior of individual
functions.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20190820163005.1880-1-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The default backend is only used within virtio_rng_device_realize().
Replace VirtIORNGConf member default_backend by a local variable.
Adjust its type to reduce conversions.
While there, pass &error_abort instead of NULL when failure would be a
programming error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190820160615.14616-3-lvivier@redhat.com>
The clock move makes the guest knows about the paused time between the
'stop' and 'migrate' commands. This is an issue in an already-paused
VM because some side effects, like process stalls, could happen
after migration.
So, this patch checks the runstate of guest in the pre_save handler and
do not re-reads the clock in case of paused state (cold migration).
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Message-Id: <20190829210711.6570-1-maxiwell@linux.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 176d2cda0 (i386/cpu: Consolidate die-id validity in smp context) added
new 'die-id' topology property to CPUs and exposed it via QMP command
query-hotpluggable-cpus, which broke -device/device_add cpu-foo for existing
users that do not support die-id/dies yet. That's would be fine if it happened
to new machine type only but it also happened to old machine types,
which breaks migration from old QEMU to the new one, for example following CLI:
OLD-QEMU -M pc-i440fx-4.0 -smp 1,max_cpus=2 \
-device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id
is not able to start with new QEMU, complaining about invalid die-id.
After discovering regression, the patch
"pc: Don't make die-id mandatory unless necessary"
makes die-id optional so old CLI would work.
However it's not enough as new QEMU still exposes die-id via query-hotpluggbale-cpus
QMP command, so the users that started old machine type on new QEMU, using all
properties (including die-id) received from QMP command (as required), won't be
able to start old QEMU using the same properties since it doesn't support die-id.
Fix it by hiding die-id in query-hotpluggbale-cpus for all machine types in case
'-smp dies' is not provided on CLI or -smp dies = 1', in which case smp_dies == 1
and APIC ID is calculated in default way (as it was before DIE support) so we won't
need compat code as in both cases the topology provided to guest via CPUID is the same.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190902120222.6179-1-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
nb_queue was not zeroed so that we no longer delivered events if a
previous guest left the device in an overflow state.
The state of absolute does not matter as the next vmmouse_update_handler
call will align it again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <f056c7e5-fa74-469c-87f8-0f0925301b2d@web.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When user doesn't request any explicit CPU model with libvirt or QEMU,
a machine type specific CPU model is picked. Currently there is no way
to determine what this QEMU built-in default is, so libvirt cannot
report this back to the user in the XML config.
This extends the "query-machines" QMP command so that it reports the
default CPU model typename for each machine.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190822100412.23746-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have this issue reported when using libvirt to hotplug CPUs:
https://bugzilla.redhat.com/show_bug.cgi?id=1741451
Basically, libvirt is not copying die-id from
query-hotpluggable-cpus, but die-id is now mandatory.
We could blame libvirt and say it is not following the documented
interface, because we have this buried in the QAPI schema
documentation:
> Note: currently there are 5 properties that could be present
> but management should be prepared to pass through other
> properties with device_add command to allow for future
> interface extension. This also requires the filed names to be kept in
> sync with the properties passed to -device/device_add.
But I don't think this would be reasonable from us. We can just
make QEMU more flexible and let die-id to be omitted when there's
no ambiguity. This will allow us to keep compatibility with
existing libvirt versions.
Test case included to ensure we don't break this again.
Fixes: commit 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190816170750.23910-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The error message when die-id is omitted doesn't make sense:
$ qemu-system-x86_64 -smp 1,sockets=6,maxcpus=6 \
-device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0
qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0: \
Invalid CPU die-id: 4294967295 must be in range 0:0
Fix it, so it will now read:
qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0: \
CPU die-id is not set
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190815183803.13346-3-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The error message for die-id range validation is incorrect. Example:
$ qemu-system-x86_64 -smp 1,sockets=6,maxcpus=6 \
-device qemu64-x86_64-cpu,socket-id=1,die-id=1,core-id=0,thread-id=0
qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,die-id=1,core-id=0,thread-id=0: \
Invalid CPU die-id: 1 must be in range 0:5
The actual range for die-id in this example is 0:0.
Fix the error message to use smp_dies and print the correct range.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190815183803.13346-2-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Temporarily no-op size_memop was introduced to aid the conversion of
memory_region_dispatch_{read|write} operand "unsigned size" into
"MemOp op".
Now size_memop is implemented, again hard coded size but with
MO_{8|16|32|64}. This is more expressive and avoids size_memop calls.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <76dc97273a8eb5e10170ffc16526863df808f487.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <e70ff5814ac3656974180db6375397c43b0bc8b8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <ebf1f78029d5ac1de1739a11d679740a87a1f02f.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <21113bae2f54b45176701e0bf595937031368ae6.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <2f41da26201fb9b0339c2b7fde34df864f7f9ea8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-7-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Child properties form the composition tree. All objects need to be
a child of another object. Objects can only be a child of one object.
Respect this with the i.MX SoC, to get a cleaner composition tree.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both object_initialize() and qdev_set_parent_bus() increase the
reference counter of the new object, so one of the references has
to be dropped afterwards to get the reference counting right.
In machine model code this refcount leak is not particularly
problematic because (unlike devices) machines will never be
created on demand via QMP, and they are never destroyed.
But in any case let's use the new sysbus_init_child_obj() instead
to get the reference counting here right.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-4-philmd@redhat.com
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ba1ba5cca introduce the ARM_CPU_TYPE_NAME() macro.
Unify the code base by use it in all places.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
