The qapi visitor contract allows us to visit a virtual structure,
where we don't have any corresponding qapi struct. Most such uses
pass NULL for @obj; but these two callers were passing a dummy
pointer, which then gets allocated to heap memory but then
immediately freed without use. Clean this up to suppress unwanted
allocation, like we do elsewhere.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Done with the Coccinelle semantic patch from commit 007b065, plus
manual clean up of dead variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1452783732-6581-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Version: GnuPG v1
iQEcBAABAgAGBQJWswswAAoJEO8Ells5jWIRmuAIAKfexolRpauVFoMt2w69Yrk4
0XhaAuSaazsfU06azXKjrchBUgXbw4Y6lw3tkTos4lnd8m1ovfAzSTS4q28rZ+Tf
u5M06Fi13oyhEViGS4gt6gTwmYPTx2FTBDMCL1OZvka7GPbVsweQn0IS18j1Q2xL
ps2kruNTad7mUa2EypuBugm3woL8kGupLUX63aWKmnvqobwFDNTKJLWiFn5eXlbg
Zq7LxmC4R3A5K9rD8wN16ScaK3RH2x83DXaRoddtSIRwdldxG9ZCv2oFKPZrr6WA
HsJIjurMTXhaRxNL3PsGMd/MbT7gmNF5muq8kZnkORmGxfMvi3RUuBdyhrq1I0w=
=2Uz/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 04 Feb 2016 08:26:24 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/filter: Fix the output information for command 'info network'
net: always walk through filters in reverse if traffic is egress
net: netmap: use nm_open() to open netmap ports
e1000: eliminate infinite loops on out-of-bounds transfer start
slirp: Adding family argument to tcp_fconnect()
slirp: Make udp_attach IPv6 compatible
slirp: Add sockaddr_equal, make solookup family-agnostic
slirp: Factorizing and cleaning solookup()
slirp: Factorizing address translation
slirp: Make Socket structure IPv6 compatible
slirp: Adding address family switch for produced frames
slirp: Generalizing and neutralizing ARP code
slirp: goto bad in udp_input if sosendto fails
cadence_gem: fix buffer overflow
net: cadence_gem: check packet size in gem_recieve
qemu-doc: Do not promote deprecated -smb and -redir options
net/slirp: Tell the users when they are using deprecated options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't want to support the legacy -tftp, -bootp, -smb and
-net channel options forever. So let's start telling the users
that they are deprecated and what option should be used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Allow enabling events without going through a file, for example:
qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv
or with globbing too:
qemu-system-x86_64 -trace 'bdrv_aio_*'
if an appropriate backend is enabled (simple, stderr, ftrace).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-6-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
original idea to split calling locations was to spawn tracing thread
in the final child process according to
commit 8a745f2a92
Author: Michael Mueller
Date: Mon Sep 23 16:36:54 2013 +0200
os_daemonize is now on top of both locations. Drop unneeded ifs.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1452174932-28657-5-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is cleaner, and improves error reporting with -daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-4-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is cleaner and has two advantages. First, it improves error
reporting with -daemonize. Second, multiple "-trace events" options
now cumulate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-3-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OVhB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
The s390-virtio machine has been removed; remove the associated devices
as well.
hw/s390x/s390-virtio-bus.c and hw/s390x/s390-virtio-bus.h
have been deleted and removed from hw/s390x/Makefile.objs
virtio-size has no more meaning for the modern machine
and has been removed from helper.c and cpu.h
virtio-serial-s390 belonging to the old machine is
being removed from vl.c
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit 1c7ba94a18.
That commit changed QEMU initialization order from
- object-initial, chardev, qtest, object-late
to
- chardev, qtest, object-initial, object-late
This breaks chardev setups which need to rely on objects
having been created. For example, when chardevs use TLS
encryption in the future, they need to have tls credential
objects created first.
This revert, restores the ordering introduced in
commit f08f9271bf
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 13 17:14:04 2015 +0100
vl: Create (most) objects before creating chardev backends
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/IfF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
# gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
qom: Clean up assertions to display values on failure
qom: Replace object property list with GHashTable
qom: Add a test case for complex property finalization
net: Convert net filter code to use object property iterators
ppc: Convert spapr code to use object property iterators
vl: Convert machine help code to use object property iterators
qmp: Convert QMP code to use object property iterators
qom: Introduce ObjectPropertyIterator struct for iteration
qdev: Change Property::offset field to ptrdiff_t type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user-test prints a warning. A test should not need to run on
hugetlbfs, let's silence the warning under qtest. The
condition can't check on qtest_enabled() since vhost-user-test actually
doesn't use qtest accel. However, qtest_driver() can be used, if
qtest_init() is called early enough. For that reason, move chardev and
qtest initialization early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop directly accessing the Object::properties field data
structure and instead use the formal object property iterator
APIs. This insulates the code from future data structure
changes in the Object struct.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The HOST_PAGE_ALIGN macros don't work until the page size variables
have been set up; later in postcopy I use those macros in the RAM
code, and it can be triggered using -object.
Fix this by initialising page_size_init() earlier - it's currently
initialised inside the accelerators, move it up into vl.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWPHM6AAoJEL/70l94x66DK5YIAJTNthYWL8eNhQ1iek6CLlV+
etVXm3JDmkV0zOfYVHLBb44VLZ6I1ocas+57F/kmz7SKpMLiI6bMXRxhTSkiO4D+
3N36cWQf3fq+P0DmxuikMlYGz8V6QQ5PQE2xJKV0ZIWAkiqInxilkN3qt81sNR+A
A9Ohom3sc0eGHyYJcVDK4krbnNSAZjIB2yMWperw61x+GYAhxjA02HPUgB32KK6q
KrdnKmnRu9Cw6y4wTCbbDITJztPexZYsX2DOJh30wC0eNcE+MZ7J2im8Frpxe+Ml
C8MUuvSqLOyeu9tUfrXGzd6kMtEKrmU+fh2nNbxJbtfowDjkW2jcIEgC0UjkGE4=
=BF1q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into staging
So here it is, let's see what happens.
# gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream-replay:
replay: recording of the user input
replay: command line options
replay: replay blockers for devices
replay: initialization and deinitialization
replay: ptimer
bottom halves: introduce bh call function
replay: checkpoints
icount: improve counting for record/replay
replay: shutdown event
replay: recording and replaying clock ticks
replay: asynchronous events infrastructure
replay: interrupts and exceptions
cpu: replay instructions sequence
cpu-exec: allow temporary disabling icount
replay: introduce icount event
replay: introduce mutex to protect the replay log
replay: internal functions for replay log
replay: global variables and function stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch records and replays simulator shutdown event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162433.8676.32262.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This makes the purpose of the function clearer: it is not about the
version of QEMU that's running, but the version string exposed in the
emulated hardware.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify warnings about deprecated options by rewriting them as
"warning: ignoring deprecated option".
Reword -no-kvm-pit-reinjection deprecation warning.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-10-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-11-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Several small improvements:
* Use "cannot" instead of "can not"
* Use 'quotes' instead of `quotes'
* Change "fail to parse" error message to "failed to parse"
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-6-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-7-git-send-email-ehabkost@redhat.com>
Message-Id: <1446217682-24421-9-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-8-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-5-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Except for removing periods and exclamation points, no other changes
were made to the error messages (yet).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-4-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Straightforward replacement, except for qemu_kill_report(), which
printed a common part of its error message first, then the applicable
special part. Print each complete message with a single
error_report() instead.
Multi-line messages were replaced by error_report() followed by
error_printf().
The following changes were made to the error messages:
* The "invalid date format" message was reworded to better fit
the new error_report()+error_printf() pattern.
* On the remaining messages, only the trailing newlines, "qemu:" and
"error:" message prefixes were removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-2-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-3-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the net-filter infrastructure to provide the dumping
functions for netdev devices, too.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWG2e/AAoJEO8Ells5jWIRcYcH/2D11W8cToCBjGDuw/u9K1ht
S3oGyFasOEq3lm3+a3zQE+vDw0RDkjLEMhcTVwNskJQl6k6Ts5JleTZ6wffvUKPM
UCozgPOCt1ZAdGskwdbByc+NhaVBHIiEsmlbDKqP22CENdDx6GWjcFW4brA4tQJQ
AW36EH77j/M+7/KiSukcUfIexILUZJRfN+ICJVyNTpGsqUNJtFqiVPBMPyJhKCEq
3pr3yJ2lf78SAEF5kBeBc9r/PDWUhtqExBsrK0L8Ey1FdrCy8ldqDPGecT4TsxNv
W/KX5AqhKSsMI8DQKdbv/IKaUdjYWNjTRQ2Qjm8Vt0hcW0PhxR0NYi6bV4yjDNM=
=f26Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 12 Oct 2015 08:56:47 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tests: add test cases for netfilter object
netfilter: add a netbuffer filter
net/queue: export qemu_net_queue_append_iov
netfilter: print filter info associate with the netdev
netfilter: add an API to pass the packet to next filter
net/queue: introduce NetQueueDeliverFunc
net: merge qemu_deliver_packet and qemu_deliver_packet_iov
netfilter: hook packets before net queue send
init/cleanup of netfilter object
vl.c: init delayed object after net_init_clients
vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command
e1000: use alias for default model
vmxnet3: Support reading IMR registers on bar0
net/vmxnet3: Refine l2 header validation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay. Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.
Usage:
-netdev tap,id=bn0
-object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000
NOTE:
Interval is in microseconds, it can't be omitted currently, and can't be 0.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Init delayed object after net_init_clients, because netfilters need
to be initialized after net clients initialized.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The malloc vtable is not supported anymore in glib, because it broke
when constructors called g_malloc. Remove tracing of g_malloc,
g_realloc and g_free calls.
Note that, for systemtap users, glib also provides tracepoints
glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc
and glib.slice_free.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The code in smp_parse already checks the topology information for
sockets * cores * threads < cpus and bails out with an error in
that case. However, it is still possible to supply a bad configuration
the other way round, e.g. with:
qemu-system-xxx -smp 4,sockets=1,cores=4,threads=2
QEMU then still starts the guest, with topology configuration that
is rather incomprehensible and likely not what the user wanted.
So let's add another check to refuse such wrong configurations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On destination, we move from INMIGRATE to FINISH_MIGRATE. Add that to
the list of allowed states.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The struct is not used anymore and can be eliminated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will be useful to ensure the machine class names follow the
right format to make machine class lookup by class name work correctly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This regression was caused by commit 70b94331.
CC vl.o
vl.c: In function ‘select_display’:
vl.c:2064:12: error: unused variable ‘err’ [-Werror=unused-variable]
Error *err = NULL;
^
Reported-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1437587610-26433-1-git-send-email-sw@weilnetz.de>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Next commit would allow to move from incoming migration to error happening on source.
Should we add more states to this transition? Luiz?
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This allows us to store the current state to send it through migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On ARM, commit ac9d32e396 postponed the
memory preparation for boot until the machine init done notifier. This
has for consequence to insert ROM at machine init done time.
However the rom_load_all function stayed called before the ROM are
inserted. As a consequence the rom_load_all function does not do
everything it is expected to do, on ARM.
It currently registers the ROM reset notifier but does not iterate through
the registered ROM list. the isrom field is not set properly. This latter
is used to report info in the monitor and also to decide whether the
rom->data can be freed on ROM reset notifier.
To fix that regression the patch moves the rom_load_all call after
machine init done. We also take the opportunity to rename the rom_load_all
function into rom_check_and_resgister_reset() and integrate the
rom_load_done in it.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Results in nicer error messages. Before this patch:
Invalid GTK option string: gtk,lirum-larum
After:
qemu-system-x86_64: -display gtk,lirum-larum: Invalid GTK option string
Of course, the thing ought to use QemuOpts instead of parsing by hand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report() is a transitional interface to help with converting
existing monitor commands to QMP. It should not be used elsewhere.
Replace by error_report() in initial startup helpers parse_sandbox()
and parse_add_fd().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Also polish an error message while I'm touching the line anyway,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVg+9dAAoJEL/70l94x66Df/MH/jWRacMKQAGJwmlXS4NsTCdh
HF85290kWn+P9NH1e7TBnhPrgBdDTJmxK3fAMHKZwXs3vDs2lC1eBJyoGZw7lVxQ
uihlnQjSSaRd5R6IpXNgr0wFrS8T3pN+FzOkStYqEHYINa1uBa6CBXYzOzGTFgd+
OOrU0O15NAVsxU29jBW4HPqX4S0zT4KbpvIESGWPgGbLyBhgLAuMLlvbWwNkFZt0
3bDtel9QQnL0Sm4wl7IWCqePEIkCkbF4tRIwCn34Bq/SuE0RgESiHGKUJ638oSuj
/ga1StztyHZhnk+SSAcnma//Holauh+2nBm+8sGyyFFeUbEJsPG70ODCrfxbQf0=
=AXLV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* i8254 security fix
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
# gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: clamp accesses against the MemoryRegionSection
exec: do not clamp accesses to MMIO regions
mc146818rtc: Reset the periodic timer on load
qemu-timer: Call clock reset notifiers on forward jumps
tests: virtio-scsi: Add test for unaligned WRITE SAME
tests: virtio-scsi: Move start/stop to individual test functions
libqos: Complete virtio device ID definition list
libqos: Allow calling guest_free on NULL pointer
tests: Link libqos virtio object to virtio-scsi-test
i8254: fix out-of-bounds memory access in pit_ioport_read()
qemu-ga: Building Windows MSI installation with configure/Makefile
qemu-ga: Introduce Windows MSI script
qemu-ga: debug printouts to help troubleshoot installation
qemu-ga: adding vss-[un]install options
qemu-log: Open file for logging when specified
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some types of object must be created before chardevs, other types of
object must be created after chardevs. As such there is no option but
to create objects in two phases.
This takes the decision to create as many object types as possible
right away before anyother backends are created, and only delay
creation of those few which have an explicit dependency on the
chardevs. Hopefully the set which need delaying will remain small
over time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add new "arg" sub-argument to the --semihosting-config allowing the user
to pass multiple input arguments separately. It is required for example
by UHI semihosting to construct argc and argv.
Also, update ARM semihosting to support new option (at the moment it is
the only target which cares about arguments).
If the semihosting is enabled and no semihosting args have been specified,
then fall back to -kernel/-append. The -append string is split on whitespace
before initializing semihosting.argv[1..n]; this is different from what
QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole
-append), but is more intuitive from UHI user's point of view and Linux
kernel just does not care as it concatenates argv[1..n] into single cmdline
string anyway.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.
Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-log defaults to stderr when there is no '-D' option mentioned on command
line. When '-D' option is specified, we also need to specify '-d' option for it
to use the specified logfile. When using monitor to enable logging this is
troublesome since there will be no '-d' option because of which monitor dumps
the logs to stderr.
Fix this by opening the log file when '-D' is specified on the command line.
Also fix an ancient comment which does not hold true since changing location and
log level has now been streamlined.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1433946024-18439-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some convinience fluff: Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Failure to create an object with -object is a fatal error. However,
we delay the actual exit until all -object are processed. On the one
hand, this permits detection of genuine additional errors. On the
other hand, it can muddy the waters with uninteresting additional
errors, e.g. when a later -object tries to reference a prior one that
failed.
We generally stop right on the first bad option, so do that for
-object as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We print it once for each -device help. Not helpful. Stop after the
first one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's reported once per -sandbox on. Stop on the first failure, like
we do for other options.
Not fixed: "-sandbox on -sandbox off" should leave the sandbox off.
It doesn't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'sleep' parameter sets the icount_sleep mode, which is enabled by
default. To disable it, add the 'sleep=no' parameter (or 'nosleep') to the
qemu -icount option.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-3-git-send-email-victor.clement@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Machines types can have different requirement for default ram
size. Introduce a member in the machine class and set the current
default_ram_size to 128MB.
For QEMUMachine types override the value during the registration of
the machine and for MachineClass introduce the generic class init
setting the default_ram_size.
Add helpers [K,M,G,T,P,E]_BYTE for better readability and easy usage
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
valgrind complains about:
==9276== 13 bytes in 1 blocks are definitely lost in loss record 1,046 of 3,673
==9276== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9276== by 0x2EAFBB: malloc_and_trace (vl.c:2556)
==9276== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==9276== by 0x4A28BD: addr_to_string (vnc.c:123)
==9276== by 0x4A29AD: vnc_socket_local_addr (vnc.c:139)
==9276== by 0x4A9AFE: vnc_display_local_addr (vnc.c:3240)
==9276== by 0x2EF4FE: main (vl.c:4321)
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This removes the following fields from QEMUMachine: family, alias,
reset, hot_add_cpu, units_per_default_bus, no_serial, no_parallel,
use_virtcon, use_sclp, no_floppy, no_cdrom, default_display,
compat_props, and hw_version.
The only users of those fields were already converted to use QOM and
MachineClass directly, so they are not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds opengl rendering support to the gtk ui, using egl.
It's off by default for now, use 'qemu -display gtk,gl=on'
to play with this.
Note that gtk got native opengl support with release 3.16.
There most likely will be a separate implementation for 3.16+,
using the native gtk opengl support. This patch covers older
versions (and for the time being 3.16 too, hopefully without
rendering quirks).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add new sdl2-gl.c file, with display
rendering functions using opengl.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Passing multiple -incoming options used to crash qemu (due to
an invalid state transition incoming->incoming). Instead we now
take the last -incoming option, e.g.:
qemu-system-x86_64 -nographic -incoming tcp::4444 -incoming defer
ends up doing the defer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.
Allow a machine to override default mapping by providing
MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
monitor_fdset_add_fd returns an AddfdInfo struct (used by the QMP
command add_fd). Free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future. Also switch over to pkg-config for
opengl support detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that -vnc goes through QemuOpts we can get vnc configuration
via -readconfig too. So setting display_remote in the command
line parsing code doesn't cut it any more, we must check QemuOpts
instead to see whenever any vnc display is configured.
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJU9UQvAAoJELp6ZbDd4w+7xGIH+wWRO2PEQptPazlRE/q0A1Hw
zmAHVNq1HAjR5NmUQVmUK/Di/qShmK8Dq9/5PV2g2z//f82KnMcnpR8yX8WJjuOB
Pw1UhAyVlq6qlCn+lsRMEIs06krJNkuEvUd/aqzfi18+cAyelVVEBik7Vu/d8Pl1
xaPUe8upEJuUMz/NqFVe88wED4vDRn6qzxv9OwuMh8dXQQxFM/lLeaU4n3Vtg5Ba
BY00OBxeLP/+p1By2aZZLDx/X9wFmEaxVD1n5Qm9zdXkiACXweoAwjSWV0wTLdZN
zoq10i25/mMs/wYd++MUefvVC9GXwk4IYxXG7jMtvclwKUxmlkCcfKCWEZw3npQ=
=yBF7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gonglei/tags/bootdevice-next-20150303' into staging
bootdevice: bug fixes
# gpg: Signature made Tue Mar 3 05:18:39 2015 GMT using RSA key ID DDE30FBB
# gpg: Good signature from "Gonglei <arei.gonglei@huawei.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5178 9C82 617F 2F58 8693 63B1 BA7A 65B0 DDE3 0FBB
* remotes/gonglei/tags/bootdevice-next-20150303:
bootdevice: add check in restore_boot_order()
bootdevice: check boot order argument validation before vm running
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the iothread lock isn't taken by the main thread, the RCU callbacks
might run concurrently with the main thread. QEMU's not ready for that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU9DRyAAoJEL/70l94x66D5ZkH/2SPp4rrLIgotyzHTIaMvi+2
0gB7Bks9cDisFyiSgr6dqLp9CV1XMlv/NZl+z+H/7og96qhBWjAKVpG1J/En55bS
vanFeWGYjINuQLnhC3pqBi2kmEkzBQSIMJZt9WnDydfQj/6Wgcr6iabOpd8eTjTz
rqE/UcV2L1baFPLy/Wky2vg/a5Ug2rj+fqvjRdFB/Zx8yDYLcKYJlI8utSQexamE
tUcxr/AqxNOoe6WZD7CCVNmHMHvajoOhWnVY4EgHDg8L3nNSgvDF3AjYfntU6A2y
HjkS0ktvQK666oNo+ORRBzLe3s9nCfB1dMK2ZiKKyFfyuYD50d2N3oHKSAIsEJo=
=AQjO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- more config options
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
# gpg: Signature made Mon Mar 2 09:59:14 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
cpus: be more paranoid in avoiding deadlocks
cpus: fix deadlock and segfault in qemu_mutex_lock_iothread
virtio-scsi: Allocate op blocker reason before blocking
Makefile.target: binary depends on config-devices
Makefile: don't silence mak file test with V=1
Makefile: fix up parallel building under MSYS+MinGW
iscsi: Handle write protected case in reopen
Give ivshmem its own config option
Create specific config option for "platform-bus"
Add specific config options for PCI-E bridges
bootdevice: fix segment fault when booting guest with '-kernel' and '-initrd'
timer: replace time() with QEMU_CLOCK_HOST
virtio-scsi-dataplane: Call blk_set_aio_context within BQL
block: Forbid bdrv_set_aio_context outside BQL
scsi: give device a parent before setting properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Either 'once' option or 'order' option can take effect for -boot at
the same time, that is say initial startup processing can check only
one. And pc.c's set_boot_dev() fails when its boot order argument
is invalid. This patch provide a solution fix this problem:
1. If "once" is given, register reset handler to restore boot order.
2. Pass the normal boot order to machine creation. Should fail when
the normal boot order is invalid.
3. If "once" is given, set it with qemu_boot_set(). Fails when the
once boot order is invalid.
4. Start the machine.
5. On reset, the reset handler calls qemu_boot_set() to restore boot
order. Should never fail.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0lJo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-26' into staging
QemuOpts: Convert various setters to Error
# gpg: Signature made Thu Feb 26 13:56:43 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-02-26:
qtest: Use qemu_opt_set() instead of qemu_opts_parse()
pc: Use qemu_opt_set() instead of qemu_opts_parse()
qemu-sockets: Simplify setting numeric and boolean options
block: Simplify setting numeric options
qemu-img: Suppress unhelpful extra errors in convert, amend
QemuOpts: Propagate errors through opts_parse()
QemuOpts: Propagate errors through opts_do_parse()
QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
block: Suppress unhelpful extra errors in bdrv_img_create()
qemu-img: Suppress unhelpful extra errors in convert, resize
QemuOpts: Convert qemu_opts_set() to Error, fix its use
QemuOpts: Convert qemu_opt_set_number() to Error, fix its use
QemuOpts: Convert qemu_opt_set_bool() to Error, fix its use
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch replaces time() function calls with calls to
qemu_clock_get_ns(QEMU_CLOCK_HOST). It makes such requests deterministic
in record/replay mode of icount.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20150227131102.11912.89850.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't convert numbers to strings for use with qemu_opt_set(), simply
use qemu_opt_set_number() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Produce more human readable error messages and fix few spelling
mistakes.
Also remove a redundant check for the max memory size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This function does some initialization that needs to be done after
machine init. The function may be eventually removed if we move the
CPUState.numa_node initialization to the CPU init code, but while the
function exists, lets give it a name that makes sense.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Renaming set_numa_nodes() and numa_init_func() to parse_numa_opts() and
parse_numa() makes the purpose of those functions clearer.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This allows us to make numa_init_func() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no need to zero-initialize globals, they are automatically
initialized to zero.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in initial startup helpers
machine_set_property() and object_create().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
valgrind complains about:
==42062== 16 bytes in 1 blocks are definitely lost in loss record 387 of 1,048
==42062== at 0x402DCB2: malloc (vg_replace_malloc.c:299)
==42062== by 0x40C1BE3: g_malloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062== by 0x40DA133: g_slice_alloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062== by 0x40DB2E5: g_slist_prepend (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062== by 0x801637FF: object_class_get_list_tramp (object.c:690)
==42062== by 0x40A96C9: g_hash_table_foreach (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062== by 0x80164885: object_class_foreach (object.c:665)
==42062== by 0x80164975: object_class_get_list (object.c:698)
==42062== by 0x800100A5: machine_parse (vl.c:2447)
==42062== by 0x800100A5: main (vl.c:3756)
Lets free machines in case of mc.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
monitor_parse() desugars --monitor, --qmp and -qmp-pretty to --mon.
The ID it picks can clash with a user-specified ID. When it happens,
the error message is misleading.
Reproducer:
$ qemu --mon id=compat_monitor0 --monitor stdio
Message before the patch:
duplicate chardev: compat_monitor0
There's no "duplicate chardev" here. The problem is a duplicate
monitor ID. Moreover, the message provides no clue which option
caused the problem. The patch changes the message to:
qemu: --monitor stdio: Duplicate ID 'compat_monitor0' for mon
monitor_parse() is also used for creating a default monitor, but
that's not done when the user specifies a monitor, so an ID clash is
impossible then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch switches vnc over to QemuOpts, and it (more or less
as side effect) allows multiple vnc server instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DisplayState isn't used anywhere, drop it. Add the vnc server ID as
parameter instead, so it is possible to specify the server instance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
The misalignment was caused by tabs which were used instead of spaces.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is happening because an actual logic is performed on the memory
arguments inside the main's switch, disregarding the config file content.
Solved by extracting the logic on a separate function and calling it
after the switch.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU tries to change the "threads" option even if it was explicitly set
in the command-line, and it shouldn't do that.
The right thing to do when all options (cpus, sockets, cores, threds)
are explicitly set is to sanity check them and abort in case they don't
make sense (i.e. when sockets*cores*threads < cpus).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should confirm max_cpus, which is >= smp_cpus, is
<= the machine's true max_cpus, not just smp_cpus.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just a coding style change, to make other changes easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After 'Machine as QOM' series the machine type input triggers
the creation of the machine class.
If the machine type is set in the configuration file, the machine
class is not updated accordingly and remains the default.
Fixed that by querying the machine options after the configuration
file is loaded.
Cc: qemu-stable@nongnu.org
Reported-by: William Dauchy <william@gandi.net>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ppc machines create a default usb controller based on a 'machine condition'.
Until now the logic was: create the usb controller if:
- the usb option was supplied in cli and value is true or
- the usb option was absent and both set_defaults and the machine
condition were true.
Modified the logic to:
Create the usb controller if:
- the machine condition is true and defaults are enabled or
- the usb option is supplied and true.
The main for this is to simplify the usb_enabled method.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-2-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The help is based on the actual machine properties
exposing only the relevant options.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has support for options per machine, keeping
a global list of options is no longer necessary.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
First, we can downsize vl.c, make it simpler by
little and little. Second, I can maintain those code
and make some improvement.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pMcy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141211' into staging
target-arm queue:
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
# gpg: Signature made Thu 11 Dec 2014 12:16:19 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141211: (33 commits)
target-arm: Check error conditions on kvm_arm_reset_vcpu
target-arm: Support save/load for 64 bit CPUs
target-arm/kvm: make reg sync code common between kvm32/64
arm_gic_kvm: Tell kernel about number of IRQs
hw/arm/boot: fix uninitialized scalar variable warning reported by coverity
hw/arm/realview.c: Fix memory leak in realview_init()
target-arm: make MAIR0/1 banked
target-arm: make c13 cp regs banked (FCSEIDR, ...)
target-arm: make VBAR banked
target-arm: make PAR banked
target-arm: make IFAR/DFAR banked
target-arm: make DFSR banked
target-arm: make IFSR banked
target-arm: make DACR banked
target-arm: make TTBCR banked
target-arm: make TTBR0/1 banked
target-arm: make CSSELR banked
target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI
target-arm: add SCTLR_EL3 and make SCTLR banked
target-arm: add MVBAR support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The usual semihosting behaviour is to process the system calls locally and
return; unfortuantelly the initial implementation dinamically changed the
target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb,
is not implemented. The result was that during debug sessions the semihosting
calls were discarded.
This patch adds a configuration variable and an option to set it on the
command line:
-semihosting-config [enable=on|off,]target=native|gdb|auto
This option enables semihosting and defines where the semihosting calls will
be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which
means 'gdb' during debug sessions and 'native' otherwise.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net
[PMM: moved declaration and definition of semihosting_target to
gdbstub.h and gdbstub.c to fix build failure on linux-user]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a command line option for adding a QMP monitor using pretty JSON
formatting.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
c/s 9b23cfb76b
or
c/s b154537ad0
moved the testing of xen_enabled() from pc_init1() to
pc_machine_initfn().
xen_enabled() does not return the correct value in
pc_machine_initfn().
Changed vmport from a bool to an enum. Added the value "auto" to do
the old way. Move check of xen_enabled() back to pc_init1().
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV65JAAoJECgfDbjSjVRpqzgIAJJDaU95xdtl/snSJVbSGsgR
2YW8mC8pjkZnV8fbu7F1vOTJSpAhj0eeXaDTqtbBhgAqBlqQ5tWAT9xDnUIlBlHN
GVTWzWaifVOGMj087Ovvy9+4NyfsuvTlf3aOjvLfqlaDqI5dbZQAyIdHNFyV7Qy9
txgAcERp+caZ4rN8XgAv82KV1JGj8PXermTgLJ+DcqYxhwWm66eEviQ+f+F5YImJ
CJQ6HFPXjclxHCuyKBL334SIwq8IfYyUUkIsGgKCNuHPUud7r2rqsIlRfeZBwLf9
igUgf4iPQL5TNVq9qwQmnTK6ddHTqHZmGyu902WxHK/N0EDq4dLw8diqFhZxo9Y=
=f7Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows machine classes to specify which display device they want
as default. If unspecified the current behavior (try cirrus, failing
that try stdvga, failing that use no display) will be used.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUVhuDAAoJEL7lnXSkw9fbOKMIAIE3XZMhar4Vmokb/K0DFbnh
gy2z7iCe7vumLKiRSJX1LGmkFO3dwykw82JZQ1SVo0RdgguJ5dx1Abx1qDM1rojL
jJT0pJ9zWPl4fTv38wCEfaysQHPdgwoH4826ga+MXnVS9XHRHHxuQ4vI01AK3oyQ
4t6/wto9H8kF3n6ny7tz5WNZClsq7qbiIqw5nNCILQfSh/VBPwxQNBiWf/nYVMuY
Ubk5noztZwH+hbiAQL5lAPz/HolcRwg1tzbR0dfmt8/aqO28rJhasG58JgtziI2y
JSg4BwldqUQEgiHonArLfQDixjLtEEyL+fQSzZm02ixwcBpc/ADSyGDy2R1zpH8=
=j1ga
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Differently from older versions, SMBIOS version 2.6 is explicit about
the encoding of UUID fields:
> Although RFC 4122 recommends network byte order for all fields, the PC
> industry (including the ACPI, UEFI, and Microsoft specifications) has
> consistently used little-endian byte encoding for the first three fields:
> time_low, time_mid, time_hi_and_version. The same encoding, also known as
> wire format, should also be used for the SMBIOS representation of the UUID.
>
> The UUID {00112233-4455-6677-8899-AABBCCDDEEFF} would thus be represented
> as 33 22 11 00 55 44 77 66 88 99 AA BB CC DD EE FF.
The dmidecode tool implements this and decodes the above "wire format"
when SMBIOS version >= 2.6. We moved from SMBIOS version 2.4 to 2.8 when
we started building the SMBIOS entry point inside QEMU, on commit
c97294ec1b.
Change smbios_build_type_1_table() to encode the UUID as specified.
To make sure we won't change the guest-visible UUID when upgrading to a
newer QEMU version, keep the old behavior on pc-*-2.1 and older.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Commit 261747f1 ("vl: Use MachineClass instead of global QEMUMachine
list") broke the ordering of the machine types in the user-visible output
of
qemu-system-XXXX -M \?
This occurred because registration was rebased from a manually maintained
linked list to GLib hash tables:
qemu_register_machine()
type_register()
type_register_internal()
type_table_add()
g_hash_table_insert()
and because the listing was rebased accordingly, from the traversal of the
list to the traversal of the hash table (rendered as an ad-hoc list):
machine_parse()
object_class_get_list(TYPE_MACHINE)
object_class_foreach()
g_hash_table_foreach()
The current order is a "random" one, for practical purposes, which is
annoying for users.
Introduce new members QEMUMachine.family and MachineClass.family, allowing
machine types to be "clustered". Introduce a comparator function that
establishes a total ordering between machine types, ordering machine types
in the same family next to each other. In machine_parse(), list the
supported machine types sorted with the comparator function.
The comparator function:
- sorts whole families before standalone machine types,
- sorts whole families between each other in alphabetically increasing
order,
- sorts machine types inside the same family in alphabetically decreasing
order,
- sorts standalone machine types between each other in alphabetically
increasing order.
After this patch, all machine types are considered standalone, and
accordingly, the output is alphabetically ascending. This will be refined
in the following patches.
Effects on the x86_64 output:
Before:
> Supported machines are:
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> isapc ISA-only PC
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> none empty machine
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
After:
> Supported machines are:
> isapc ISA-only PC
> none empty machine
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
Effects on the aarch64 output:
Before:
> Supported machines are:
> lm3s811evb Stellaris LM3S811EVB
> canon-a1100 Canon PowerShot A1100 IS
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> connex Gumstix Connex (PXA255)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> lm3s6965evb Stellaris LM3S6965EVB
> versatileab ARM Versatile/AB (ARM926EJ-S)
> borzoi Borzoi PDA (PXA270)
> tosa Tosa PDA (PXA255)
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> midway Calxeda Midway (ECX-2000)
> mainstone Mainstone II (PXA27x)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> terrier Terrier PDA (PXA270)
> highbank Calxeda Highbank (ECX-1000)
> cubieboard cubietech cubieboard
> sx1-v1 Siemens SX1 (OMAP310) V1
> sx1 Siemens SX1 (OMAP310) V2
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> akita Akita PDA (PXA270)
> z2 Zipit Z2 (PXA27x)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> spitz Spitz PDA (PXA270)
> none empty machine
> virt ARM Virtual Machine
> collie Collie PDA (SA-1110)
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> verdex Gumstix Verdex (PXA270)
> nuri Samsung NURI board (Exynos4210)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
After:
> Supported machines are:
> akita Akita PDA (PXA270)
> borzoi Borzoi PDA (PXA270)
> canon-a1100 Canon PowerShot A1100 IS
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> collie Collie PDA (SA-1110)
> connex Gumstix Connex (PXA255)
> cubieboard cubietech cubieboard
> highbank Calxeda Highbank (ECX-1000)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> lm3s6965evb Stellaris LM3S6965EVB
> lm3s811evb Stellaris LM3S811EVB
> mainstone Mainstone II (PXA27x)
> midway Calxeda Midway (ECX-2000)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> none empty machine
> nuri Samsung NURI board (Exynos4210)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> spitz Spitz PDA (PXA270)
> sx1 Siemens SX1 (OMAP310) V2
> sx1-v1 Siemens SX1 (OMAP310) V1
> terrier Terrier PDA (PXA270)
> tosa Tosa PDA (PXA255)
> verdex Gumstix Verdex (PXA270)
> versatileab ARM Versatile/AB (ARM926EJ-S)
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> virt ARM Virtual Machine
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> z2 Zipit Z2 (PXA27x)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1145042
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
In case of -daemonize, we write non-zero to the daemon
pipe only if pidfile creation failed, so the parent will
report error about pidfile problem. There's no need to
make special case for this, since all other errors are
reported by the child just fine. Let the parent report
error and simplify logic in os_daemonize().
This way, we don't need os_pidfile_error() function, since
it only prints error now, so put the error reporting printf
into the only place where qemu_create_pidfile() is called,
in vl.c.
While at it, fix wrong indentation in os_daemonize().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit abfd9ce3(migration: dump vmstate info as a json
file for static analysis) introduce a new command,
'-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
However, only one instance of the -dump-vmstate option is supported.
If more were given, the vmstate_dump_file variable would be overwritten.
This fix also helps silence a Coverity error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_shutdown_requested may be interrupted by qemu_system_killed. If the
latter sets shutdown_requested after qemu_shutdown_requested has read it
but before it was cleared, the shutdown event is lost. Fix this by using
atomic_xchg.
This provides a different fix for the problem which commit 15124e142
attempts to deal with. That commit breaks use of ^C to drop into gdb,
and so this approach is better (and 15124e142 can be reverted).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This command lists PCMCIA sockets and cards. Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.
Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity. Has never been used, because there has never been code
to eject a PCMCIA card.
Not worth fixing & converting to QMP. Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just to make checkpatch.pl happy when moving the code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.
This property only overrides the mapping for drives matching
the block_default_type interface.
This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.
Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.
Examples:
Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.
-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.
These are invalid for AHCI. They now become, under Q35 only:
-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.
The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we configure mlock=on and memory policy=bind at the same time,
It will consume lots of time for system to treat with memory,
especially when call mbind behind mlockall.
Adjust the place of calling mlockall, calling mbind before mlockall
can remarkably reduce the time of VM's startup.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.
The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.
The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.
This commit adds an error message on failure:
# qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
qemu: Failed to initialize event notifier: Too many open files in system
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In error message, maxmem is printed in Dec but ram_size in Hex.
It is better to print them in same format.
Also use error_report instead of fprintf.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUGyniAAoJECgfDbjSjVRpxg0H/j4jSEWHm/4uKSly6W4MXxhN
LghE5iAaO3awU88RiRPW/m/g6sagD9RuQAHteHkvyZ6py/li0IFvLtl66OczeSgc
rnM2n9MeYfi5Q05T+ygjqYY2ynosYhrI4iPmsnKqbqLi+WWwQHFKuYKNcNmQjmJu
Sg4KDz+W4p5j/pMUZdgf4lse3PaLXoMy4IA1HC8U1WmwvyNLZrPRTXhFn1hFbxU6
Rf604wz6gkAFvwizt2SoRMOIF4w0meCKemY1wqcwOeDWqP6Bj76RnRCrVR06AgnX
ngVsrP5SrWymqwFUP9ZpeNdBOQSxXE3zT1cE6JU3/KUvTBs6Eur4Dnz7g2mPb8I=
=nHHz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio, misc bugfixes
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: leave more space for BIOS allocations
virtio-pci: fix migration for pci bus master
vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation
virtio-pci: enable bus master for old guests
Revert "virtio: don't call device on !vm_running"
virtio-net: drop assert on vm stop
Revert "rng-egd: remove redundant free"
qdev: Move global validation to a single function
qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()
test-qdev-global-props: Test handling of hotpluggable and non-device types
test-qdev-global-props: Initialize not_used=true for all props
test-qdev-global-props: Run tests on subprocess
tests: disable global props test for old glib
test-qdev-global-props: Trivial comment fix
hw/machine: Free old values of string properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ticks and clock offset used by CPU timers have to be saved in vmstate.
But vmstate for these fields registered only in icount mode.
Missing registration leads to breaking the continuity when vmstate is loaded.
This patch introduces new initialization function which fixes this.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit c4090f8, -object options are no longer handled through
object_set_property(), so clean up -object leftovers by renaming the
function and dropping special-casing of qom-type and id properties.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A bunch of bugfixes - these will make sense for 2.1.1
Initial Intel IOMMU support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUBdygAAoJECgfDbjSjVRpa9cIAJS06we0CpJaVmPrQS5HvC1w
An5Y5bGdfMQtfKjqN1Kehmtu/+wjNKZJw427+6B+KNO7wm9rRUiu927qp9lNGlbH
g3ybrknKYeyqVO/43SJt8c1eODSkmNgHPqyCkRVLbriYo850b2HhjJyMvVNZqeHD
zuTmU95GTNeiYAV8J1c59OrqUz302kCXI4A47loY7LdoEFMbJat4DbkrkspuTgbQ
EVk5sR8p2atKzgaOV6M6yiAtL5uSBNr9KmHvuA7ZBiV21wmOJm5u3y6DpLczUD90
+Ln6BCjmPS5GQ12pzY7U65enr/x/RYo6k01ig9MP3TndNA02XxCaskqfd083jM8=
=4drK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc fixes, features
A bunch of bugfixes - these will make sense for 2.1.1
Initial Intel IOMMU support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 02 Sep 2014 16:05:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost_net: start/stop guest notifiers properly
pci: avoid losing config updates to MSI/MSIX cap regs
virtio-net: don't run bh on vm stopped
ioh3420: remove unused ioh3420_init() declaration
vhost_net: cleanup start/stop condition
intel-iommu: add IOTLB using hash table
intel-iommu: add context-cache to cache context-entry
intel-iommu: add supports for queued invalidation interface
intel-iommu: fix coding style issues around in q35.c and machine.c
intel-iommu: add Intel IOMMU emulation to q35 and add a machine option "iommu" as a switch
intel-iommu: add DMAR table to ACPI tables
intel-iommu: introduce Intel IOMMU (VT-d) emulation
iommu: add is_write as a parameter to the translate function of MemoryRegionIOMMUOps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Intel IOMMU emulation to q35 chipset and expose it to the guest.
1. Add a machine option. Users can use "-machine iommu=on|off" in the command
line to enable/disable Intel IOMMU. The default is off.
2. Accroding to the machine option, q35 will initialize the Intel IOMMU and
use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for
the pci bus.
3. q35_host_dma_iommu() will return different address space according to the
bus_num and devfn of the device.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QOM backends can refer to chardevs, but not vice versa. So
process -chardev and -fsdev options before -object
This fixes the rng-egd backend to virtio-rng.
Reported-by: Amos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
err is not freed after use, thus causing memory leak. This patch fixes
it.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The align option is used for activating the align algorithm
in order to synchronise the host clock and the guest clock.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make icount parameter use QemuOpts style options in order
to easily add other suboptions.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replaced '_' with '-' to comply with QOM guidelines.
Made the conversion from command line to QMP in vl.c.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If machine doesn't support memory hotplug then starting QEMU
with initial memory less than default will make QEMU exit with
following error message:
$QEMU -m 16 -M isapc
qemu-system-i386: "-memory 'slots|maxmem'" is not supported by: isapc
Set maxram_size to initial memory value before parsing
'maxmem' option allows to keep maxmem in sync with initial
memory size if no maxmem option was specified.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: Bruce Rogers <brogers@suse.com>
Reviewed-By: Bruce Rogers <brogers@suse.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.
The root cause may be not in QEMU mostly. However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.
Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.
When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.
if (qemu_powerdown_requested())
qemu_system_powerdown()
monitor_protocol_event(QEVENT_POWERDOWN, NULL)
OR
if(qemu_shutdown_requested()}
monitor_protocol_event(QEVENT_SHUTDOWN, NULL);
The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.
Signed-off-by: Yang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be added (after QOMification) as the QOM parent.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on "enable sparse node numbering" patch from Nishanth Aravamudan,
but without the code to actually support sparse node IDs. This just adds
the code to keep track of present/non-present nodes on the command-line,
without changing any behavior.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
[Rename max_numa_node to max_numa_nodeid -Eduardo]
[Initialize max_numa_nodeid to 0 -Eduardo]
[Use MAX() macro when setting max_numa_nodeid -Eduardo]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTqEbfAAoJECgfDbjSjVRpFkoIAKj/JZvwQfOkDON12iIou8Fm
qFhn9t6Tf/HHvwhsrLrPH3wnmTiwJpnSrU2/X9SjSBqugiG4NdS2BrzGS1T5mNET
Q8q2CdYhrWzriCnNMotoug8oXIJGSfORITsU2c3zH7mLJHi5V6m78PZzLiiyTgJW
VS0Zb/F2YFn9vDA6vzSX3dUCH/1MGVwTf3pSaGBs3k1DwPT9OpV7ejdhqJ0SB03t
ih//P3E5t2+kkoUEUEqHVhRepvn0nrDq9fxL97scUbhx5Lz3hBteoewNjlqDsrCv
kbX+PswfSRWTEbjQ3yeGSyyzITIe/6W7rLb2gYAl2Efn/WDGIw2JXff2XPiro1I=
=qjXy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,net fixes, enhancements
Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Jun 2014 16:25:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (23 commits)
xen-hvm: Handle machine opt max-ram-below-4g
pc & q35: Add new machine opt max-ram-below-4g
xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
pcie: coding style tweak
hw/pcie: better hotplug/hotunplug support
hw/pcie: implement power controller functionality
hw/pcie: correct debug message
q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props
virtio-pci: Report an error when msix vectors init fails
qemu-char: avoid leaking unused fds in tcp_get_msgfds()
qemu-char: fix qemu_chr_fe_get_msgfd()
qapi/string-output-visitor: fix human output
e1000: factor out checking for auto-negotiation availability
e1000: move e1000_autoneg_timer() to after set_ics()
e1000: signal guest on successful link auto-negotiation
e1000: improve auto-negotiation reporting via mii-tool
e1000: emulate auto-negotiation during external link status change
qtest: fix vhost-user-test unbalanced mutex locks
qtest: fix qtest for vhost-user
libqemustub: add more stubs for qemu-char
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds a new command, '-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
The JSON-format output can then be used to compare the vmstate info for
different QEMU versions, specifically to test whether live migration
would break due to changes in the vmstate data.
A Python script that compares the output of such JSON dumps is included
in the following commit.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix 32 bit
There is no existing comments for POWERDOWN in doc/qmp/qmp-events.txt,
so no change on it like other conversion patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch also eliminates build time warning caused by
QAPI_EVENT_MAX = 0.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.
Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).
qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user. This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 4407ab055be995e64633322a78e64dfa376dc534
vl.c: extend -m option to support options for memory hotplug
prints ram_addr_t with u64 format, this is wrong for
some systems, in particular w32.
print ram_addr_t with RAM_ADDR_FMT to fix build on w32.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follow the lines of the HMP implementation, using OptsVisitor
to parse the options. This gives access to OptsVisitor's
rich parsing of integer lists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes. For example:
-object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
-object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
The option replaces "-numa node,mem=".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: conflict resolution
