Inline it into its one caller, tci_write_reg64.
Drop the asserts that are redundant with tcg_read_r.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The encoding planned for tci does not have enough room for
brcond2, with 4 registers and a condition as input as well
as the label. Resolve the condition into TCG_REG_TMP, and
relax brcond to one register plus a label, considering the
condition to always be reg != 0.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to adjust the offset range on host memory ops,
and the format of branches. Both will require a temporary.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This requires adjusting where arguments are stored.
Place them on the stack at left-aligned positions.
Adjust the stack frame to be at entirely positive offsets.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As the only call-clobbered regs for TCI, these should
receive the least priority.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current setting is much too pessimistic. Indicating only
the one or two registers that are actually assigned after a
call should avoid unnecessary movement between the register
array and the stack array.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libffi as a build requirement for TCI.
Add libffi to the dockerfiles to satisfy that requirement.
Construct an ffi_cif structure for each unique typemask.
Record the result in a separate hash table for later lookup;
this allows helper_table to stay const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will give us both flags and typemask for use later.
We also fix a dumping bug, wherein calls generated for plugins
fail tcg_find_helper and print (null) instead of either a name
or the raw function pointer.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As noted by qemu-plugins.h, plugins can neither read nor write
guest registers.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As noted by qemu-plugins.h, enum qemu_plugin_cb_flags is
currently unused -- plugins can neither read nor write
guest registers.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide on inlining.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're going to change how to look up the call flags from a TCGop,
so extract it as a helper.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly be interested in distinguishing pointers
from integers in the helper's declaration, as well as a
true void return. We currently have two parallel 1 bit
fields; merge them and expand to a 3 bit field.
Our current maximum is 7 helper arguments, plus the return
makes 8 * 3 = 24 bits used within the uint32_t typemask.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qmp-shell has a new home, add a redirect for a little while as the dust
settles.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-43-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
now 'qmp-shell' should be available from the command line when
installing the python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-42-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script will be unavailable for a commit or two, which will help
preserve development history attached to the new file. A forwarder will
be added shortly afterwards.
With qmp_shell in the python qemu.qmp package, now it is fully type
checked, linted, etc. via the Python CI. It will be quite a bit harder
to accidentally break it again in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-41-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In preparation for moving qmp-shell into the qemu.qmp package, make
QMPShellError inherit from QMPError so that all custom errors in this
package all derive from QMPError.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-39-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
They're not needed; single underscore is enough to express intent that
these methods are "internal". double underscore is used as a weak name
mangling, but that isn't beneficial for us here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-38-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The nice usage comment should be a docstring instead of a comment, so
that it's visible from other python tooling.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-37-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are only anticipating QMPShellErrors here, for syntax we weren't able
to understand. Other errors, if any, should be allowed to percolate
upwards.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-36-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
calling "transaction( )" is pointless, but valid. Rework the parser to
allow this kind of invocation. This helps clean up exception handling
later by removing accidental breakages of the parser that aren't
explicitly forbidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-35-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We still want to revamp qmp-shell again, but there's much more to the
idea than the comment now intuits. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-34-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A perfect candidate is non-fatal shell history messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-33-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We can invoke the shell history writing when we leave the QMPShell scope
instead of relying on atexit. Doing so may be preferable to avoid global
state being registered from within a class instead of from the
application logic directly.
Use QMP's context manager to hook this history saving at close time,
which gets invoked when we leave the context block.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-32-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
__enter__ can be invoked from a subclass, so it needs a more flexible
type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-31-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Similar to verbose, there's no reason this needs to be hidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-30-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't "extend" QEMUMonitorProtocol by changing the argument types. Move
the string parsing just outside of the class instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-29-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As per my usual, this patch is annotations only. Any changes with side
effects are done elsewhere.
Note: pylint does not understand the subscripts for Collection in Python 3.6,
so use the stronger Sequence type as a workaround.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is meant to represent any generic object seen in a QMPMessage, not
just the root object itself.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-27-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an empty completer as a more type-safe placeholder instead of
'None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
list is a generic type, but we expect to use strings directly. We could
subclass list[str], but pylint does not presently understand that
invocation.
Change this class to envelop a list instead of *being* a list, for
simpler mypy typing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not sure when this regressed (Or maybe if it was ever working right
to begin with?), but the Python AST requires you to change "Names" to
"Constants" in order to truly convert `false` to `False`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of doing this in main, move it into the class itself. (This
makes it easier to put into the qemu.qmp package later by removing as
much as we can from the main() function.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's only ever used by one caller, we can just absorb that logic.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Small tidying; treat "prompt" like an immutable property instead of
function/method/routine.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No real reason to hide this behind an underscore; make it part of the
initializer and make it a regular RW attribute.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's less useful, but it makes the initialization methods LSP
consistent, which quiets a mypy complaint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Use argparse instead of an open-coded CLI parser, for consistency with
everything else.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit more idiomatic, and quiets some linter warnings.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Shushes pylint. I don't always mind these patterns personally, but I'm
not as sure that I want to remove the warning from pylint's repertoire
entirely. Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to remove exceptions that are too broad here; we only want to
catch IOErrors that get raised as a direct result of the open call.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit of churn and housekeeping for pylint, flake8 et al.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This function returns None when it doesn't find a match; do that
explicitly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not something I control, sorry, pylint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(2014 me had never written python before.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Linters get angry when we don't define state at init time.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Methods with no self-use should belong to the class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
