While ARM could present the xenpv machine, it does not and trying to enable
it breaks compilation. Revert to the previous test which only looked at
$target_name, not $cpu.
Fixes: 3b6b75506d
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170711100049.20513-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For v7M, writes to the CONTROL register are only permitted for
privileged code. However even if the code is privileged, the
write must not affect the SPSEL bit in the CONTROL register
if the CPU is in Thread mode (as documented in the pseudocode
for the MSR instruction). Implement this, instead of permitting
SPSEL to be written in all cases.
This was causing mbed applications not to run, because the
RTX RTOS they use relies on this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1498820791-8130-1-git-send-email-peter.maydell@linaro.org
When running with KVM enabled, you can choose between emulating the
gic in kernel or user space. If the kernel supports in-kernel virtualization
of the interrupt controller, it will default to that. If not, if will
default to user space emulation.
Unfortunately when running in user mode gic emulation, we miss out on
interrupt events which are only available from kernel space, such as the timer.
This patch leverages the new kernel/user space pending line synchronization for
timer events. It does not handle PMU events yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1498577737-130264-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ast2400 contains two and the ast2500 contains three watchdogs.
Add this information to the AspeedSoCInfo and realise the correct number
of watchdogs for that each SoC type.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add emulation for Exynos4210 Pseudo Random Number Generator which could
work on fixed seeds or with seeds provided by True Random Number
Generator block inside the SoC.
Implement only the fixed seeds part of it in polling mode (no
interrupts).
Emulation tested with two independent Linux kernel exynos-rng drivers:
1. New kcapi-rng interface (targeting Linux v4.12),
2. Old hwrng inteface
# echo "exynos" > /sys/class/misc/hw_random/rng_current
# dd if=/dev/hwrng of=/dev/null bs=1 count=16
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170425180609.11004-1-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped a few overlong lines; more efficient implementation
of exynos4210_rng_seed_ready()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The content of the backends/trace-events file was entirely
removed in
commit 6b10e573d1
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon May 29 12:39:42 2017 +0400
char: move char devices to chardev/
Leaving the empty file around, causes tracetool to generate
an empty .dtrace file which makes the dtrace compiler throw
a syntax error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170629162046.4135-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Events with the "vcpu" property need to be set globally (i.e., as if they didn't
have that property) while we have not yet created any vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 149838891852.10366.11525912227070211356.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The caller of SetupDiGetClassDevs must delete the returned device information
set when it is no longer needed by calling SetupDiDestroyDeviceInfoList.
Signed-off-by: Li Ping <li.ping288@zte.com.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
fprintf(stderr) is how errors are reported in this file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Our FORTIFY_SOURCE check assumes that $cxx refers to a working C++
compiler, with the result that if you don't happen to have one
then configure will spuriously print
configure: line 4685: c++: command not found
Fix this by adding a 'has $cxx' check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The kludged field 'msi_nonbroken' is declared in "hw/pci/msi.h" and defined in
hw/pci/msi.c.
When using an ARM config with CONFIG_PCI disabled, hw/pci/msi.c is not included.
Without being PCI-related, the files hw/intc/arm_gicv[23*].c do access this
field (to enable the kludge if PCI is enabled).
The final link fails since hw/pci/msi.c is not included.
Defining this field in pci-stub is safe enough for configs without CONFIG_PCI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure script prefers pkg-config over sdl-config, but
the "--static-libs" parameter only exists for the latter. With
pkg-config, "--static --libs" have to be used instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/984516
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When XIVE is supported, the device tree should be populated
accordingly and the XIVE memory regions mapped to activate MMIOs.
Depending on the design we choose, we could also allocate different
ICS and ICP objects, or switch between objects. This needs to be
discussed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER9, the Client Architecture Support (CAS) negotiation process
determines whether the guest operates in XIVE Legacy compatibility
(the former POWER8 interrupt model) or in XIVE exploitation mode (the
newer POWER9 interrupt model).
Bit 7 of Byte 23 of vector 5 is used for this purpose.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running KVM on POWER, we allow the user to pass "-cpu POWERx" instead
of "-cpu host". This is achieved by patching the ppc_cpu_aliases[] array
so that "POWERx" points to the CPU class with the same PVR as the host CPU.
This causes CPUs to be instantiated from this CPU class instead of the
TYPE_HOST_POWERPC_CPU class which is used with "-cpu host". These CPUs thus
miss all the KVM specific tuning from kvmppc_host_cpu_class_init().
This currently causes QEMU with "-cpu POWER9" to fail when running KVM on a
POWER9 DD1 host:
qemu-system-ppc64: Register sync failed... If you're using kvm-hv.ko, only
"-cpu host" is possible
kvm_init_vcpu failed: Invalid argument
Let's have the "POWERx" alias to point to TYPE_HOST_POWERPC_CPU directly,
so that "-cpu POWERx" instantiates CPUs from the same class as "-cpu host".
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We print a warning if the spapr IOMMU isn't configured to support a page
size matching the host page size backing RAM. When that's the case we need
more complex logic to translate VFIO mappings, which is slower.
But, it's not so slow that it would be at all noticeable against the
general slowness of TCG. So, only warn when using KVM. This removes some
noisy and unhelpful warnings from make check on hosts with page sizes
which typically differ from those on POWER (e.g. Sparc).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
QEMU shouldn't abort if spapr_add_lmbs()->spapr_drc_attach() fails.
Let's propagate the error instead, like it is done everywhere else
where spapr_drc_attach() is called.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In target/ppc/mmu-hash64.c there already exists the function
ppc_hash64_get_phys_page_debug() to get the physical (real) address for
a given effective address in hash mode.
Implement the function ppc_radix64_get_phys_page_debug() to allow a real
address to be obtained for a given effective address in radix mode.
This is used when a debugger is attached to qemu.
Previously we just had a comment saying this is unimplemented which then
fell through to the default case and caused an abort due to
unrecognised mmu model as the default had no case for the V3 mmu, which
was misleading at best.
We reuse ppc_radix64_walk_tree() which is used by the radix fault
handler since the process of walking the radix tree is identical.
Reported-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mmu-radix64.c file implements functions to enable the radix mmu
emulation in tcg mode. There is a function ppc_radix64_walk_tree() which
performs the radix tree walk and also implicitly checks the pte
protection.
Move the protection checking of the pte from the ppc_radix64_walk_tree()
function into the caller. This means the ppc_radix64_walk_tree() function
can be used without protection checking which is useful for debugging.
ppc_radix64_walk_tree() no longer needs to take the rwx and prot variables.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
AIUI, ->unplug_request in the HotplugHandler is used for "soft"
unplug, where acknowledgement from the guest is required before
completing the unplug, whereas ->unplug is used for "hard" unplug
where qemu unilaterally removes the device, and the guest just has to
cope with its sudden absence. For spapr we (correctly) use
->unplug_request for CPU and memory hot unplug but we use ->unplug for
PCI.
While I think it might be possible to support "hard" PCI unplug within
the PAPR model, that's not how it actually works now. Although it's
called from ->unplug, the PCI unplug path will usually just mark the
device for removal, with completion of the unplug delayed until
userspace responds to the unplug notification. If the guest doesn't
respond as expected, that could delay the unplug completion arbitrarily
long.
To reflect that, change the PCI unplug path to be called from
->unplug_request. We also rename spapr_phb_hot_plug_child() and
spapr_phb_hot_unplug_child() to spapr_pci_plug() and
spapr_pci_unplug_request() to more obviously reflect the callbacks they're
implementing.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_drc_attach() has a 'coldplug' parameter which sets the DRC into
configured state initially, instead of the usual ISOLATED/UNUSABLE state.
It turns out this is unnecessary: although coldplugged devices do need to
be in CONFIGURED state once the guest starts, that will already be
accomplished by the reset code which will move DRCs for already plugged
devices into a coldplug equivalent state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
At the moment, spapr_drc_release() has an ugly switch on the DRC type to
call the right, device-specific release function. This cleans it up by
doing that via a proper QOM method.
It's still arguably an abstraction violation for the DRC code to call into
the specific device code, but one mess at a time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
DRC objects have a regular device reset method. However, it only gets
called in the usual way for PCI DRCs. Because of where CPU and LMB DRCs
are in the QOM tree, their device reset method isn't automatically called.
So, the machine manually registers reset handlers to call device_reset().
This patch removes the device reset method, and instead always explicitly
registers the reset handler from realize(). This means the callers don't
have to worry about the two cases, and we always get proper resets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The DR-indicator is essentially a "virtual LED" attached to a hotpluggable
device, which the guest can set to various states for the attention of
the operator or management layers.
It's mostly guest managed, except that we once-off set it to
ACTIVE/INACTIVE in the attach/detach path. While that makes certain sense,
there's no indication in PAPR that the hypervisor should do this, and the
drmgr code on the guest side doesn't appear to need it (it will already set
the indicator to ACTIVE on hotplug, and INACTIVE on remove).
So, leave the DR-indicator entirely to the guest; the only thing we need
to do is ensure it's in a sane state on reset.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Properly set the book E exception syndrome register when a floating
point exception occurs.
Currently on a book E processor, the POWERPC_EXCP_FP exception handler
fails to set "env->spr[SPR_BOOKE_ESR] = ESR_FP;" as required by the
book E specification.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
since commit 5c4537bd ("spapr: Fix 2.7<->2.8 migration of PCI host bridge"),
some migration fields are forged from the new ones in spapr_pci_pre_save().
It works well, except when the number of MSI devices is 0,
because in this case the function exits immediately.
This fix moves the migration code before the exit code.
The problem can be reproduced with these commands:
source qemu-2.9:
qemu-system-ppc64 -monitor stdio -M pseries-2.6 -nodefaults -S
destination qemu-2.6:
qemu-system-ppc64 -monitor stdio -M pseries-2.6 -nodefaults \
-incoming tcp:0:4444
on the source:
migrate tcp:localhost:4444
Destination fails with the following error:
qemu-system-ppc64: error while loading state for
instance 0x0 of device 'spapr_pci'
qemu-system-ppc64: load of migration failed: Invalid argument
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
$ git grep spapr_ppc_reset
hw/ppc/spapr.c: * as part of spapr_ppc_reset().
$ git grep ppc_spapr_reset
hw/ppc/spapr.c:static void ppc_spapr_reset(void)
hw/ppc/spapr.c: mc->reset = ppc_spapr_reset;
hw/ppc/spapr_hcall.c: /* If ppc_spapr_reset() did not set up a HPT
but one is necessary
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have more of these since the addition of KVMPPC_H_LOGICAL_MEMOP in 2012.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ff9006ddbf ("spapr: move spapr_core_[foo]plug() callbacks
close to machine code in spapr.c"), this function doesn't need to be extern
anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----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=KZXr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170710a' into staging
Migration pull 2017-07-10
# gpg: Signature made Mon 10 Jul 2017 18:04:57 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170710a:
migration: Make compression_threads use save/load_setup/cleanup()
migration: Convert ram to use new load_setup()/load_cleanup()
migration: Create load_setup()/cleanup() methods
migration: Rename cleanup() to save_cleanup()
migration: Rename save_live_setup() to save_setup()
doc: update TYPE_MIGRATION documents
doc: add item for "-M enforce-config-section"
vl: move global property, migrate init earlier
migration: fix handling for --only-migratable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Once there, be consistent and use
compress_thread_{save,load}_{setup,cleanup}.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-6-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Once there, I rename ram_migration_cleanup() to ram_save_cleanup().
Notice that this is the first pass, and I only passed XBZRLE to the
new scheme. Moved decoded_buf to inside XBZRLE struct.
As a bonus, I don't have to export xbzrle functions from ram.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
loaded_data pointer was needed because called can change it (dave)
spell loaded correctly in comment (dave)
Message-Id: <20170628095228.4661-5-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to do things at load time and at cleanup time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Peter collected Eduardo's patch comment and formatted into patch]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's never documented, and now we have one more parameter for it (which
obsoletes this one). Document it properly.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499396048-21657-1-git-send-email-peterx@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed 'Although now' commit message as per Eduardo's review
Currently drive_init_func() may call migrate_get_current() while the
migrate object is still not ready yet at that time. Move the migration
object init earlier, along with the global properties, right after
acceleration init.
This fixes a breakage for iotest 055, which caused an assertion failure.
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Fixes: 3df663 ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-3-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: 3df663e ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Intel 82599 VFs report a PCIe capability version of 0, which is
invalid. The earliest version of the PCIe spec used version 1. This
causes Windows to fail startup on the device and it will be disabled
with error code 10. Our choices are either to drop the PCIe cap on
such devices, which has the side effect of likely preventing the guest
from discovering any extended capabilities, or performing a fixup to
update the capability to the earliest valid version. This implements
the latter.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIOGroup.device_list is effectively our reference tracking mechanism
such that we can teardown a group when all of the device references
are removed. However, we also use this list from our machine reset
handler for processing resets that affect multiple devices. Generally
device removals are fully processed (exitfn + finalize) when this
reset handler is invoked, however if the removal is triggered via
another reset handler (piix4_reset->acpi_pcihp_reset) then the device
exitfn may run, but not finalize. In this case we hit asserts when
we start trying to access PCI helpers since much of the PCI state of
the device is released. To resolve this, add a pointer to the Object
DeviceState in our common base-device and skip non-realized devices
as we iterate.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Let NBD use the trace mechanisms already present in qemu. Now you can
use the -trace optino of qemu, or the -T/--trace option of qemu-img,
qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands
trace-event-{get,set}-state can also toggle tracing on the fly.
Example:
qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces
Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore,
DEBUG_NBD macro is removed from the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com>
[eblake: minor tweaks to a couple of traces]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reorganize traces: move, reword, add information, drop extra ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename 'clientflags' to just 'option'. This variable has nothing to do
with flags, but is a single integer representing the option requested
by the client.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
