Commit Graph

14606 Commits

Author SHA1 Message Date
Nicholas Piggin
6b8a05373b ppc/spapr: Move spapr nested HV to a new file
Create spapr_nested.c for most of the nested HV implementation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-25 22:41:30 +02:00
Nicholas Piggin
c709e8eacd ppc/spapr: Add a nested state struct
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.

Have helper functions to save and load this host state.

Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-25 22:41:30 +02:00
Peter Maydell
b0438861ef host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it.  Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value.  The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.

The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253

The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
fffb6e6afd
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is
FB12210478.

Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater.  There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.

Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Bertalan <dani@danielbertalan.dev>
Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
2023-06-23 11:21:43 +01:00
Richard Henderson
4d6e1c6495 include/exec/memattrs: Add two bits of space to MemTxAttrs
We will need 2 bits to represent ARMSecurityState.

Do not attempt to replace or widen secure, even though it
logically overlaps the new field -- there are uses within
e.g. hw/block/pflash_cfi01.c, which don't know anything
specific about ARM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23 11:15:44 +01:00
Mark Cave-Ayland
7a1f3acb3f q800: move macfb device to Q800MachineState
Also change the instantiation of the macfb device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:30:11 +02:00
Mark Cave-Ayland
36df1c5a63 q800: move mac-nubus-bridge device to Q800MachineState
Also change the instantiation of the mac-nubus-bridge device to use
object_initialize_child() and map the Nubus address space using
memory_region_add_subregion() instead of sysbus_mmio_map().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:29:04 +02:00
Mark Cave-Ayland
01f35a4f1c q800: move SWIM device to Q800MachineState
Also change the instantiation of the SWIM device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:28:30 +02:00
Mark Cave-Ayland
e78d17ca7d q800: move ESP device to Q800MachineState
Also change the instantiation of the ESP device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:27:54 +02:00
Mark Cave-Ayland
1a7a3f004c q800: move escc_orgate device to Q800MachineState
Also change the instantiation of the escc_orgate device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:27:21 +02:00
Mark Cave-Ayland
836126c773 q800: move ESCC device to Q800MachineState
Also change the instantiation of the ESCC device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:26:47 +02:00
Mark Cave-Ayland
804ae67ee6 q800: move dp8393x device to Q800MachineState
Also change the instantiation of the dp8393x device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:26:13 +02:00
Mark Cave-Ayland
2db48d0364 hw/net/dp8393x.c: move TYPE_DP8393X and dp8393xState into dp8393x.h
This is to enable them to be used outside of dp8393x.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:25:40 +02:00
Mark Cave-Ayland
d7942e166a q800: move VIA2 device to Q800MachineState
Also change the instantiation of the VIA2 device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:25:05 +02:00
Mark Cave-Ayland
6d32c0643f q800: move VIA1 device to Q800MachineState
Also change the instantiation of the VIA1 device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:24:31 +02:00
Mark Cave-Ayland
f18a288632 q800: reimplement mac-io region aliasing using IO memory region
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".

Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:23:56 +02:00
Mark Cave-Ayland
7527c52fd0 q800: introduce mac-io container memory region
Move all devices from the IO region to within the container in preparation
for updating the IO aliasing mechanism.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:23:23 +02:00
Mark Cave-Ayland
1ecc6ec1ff q800: move GLUE device to Q800MachineState
Also change the instantiation of the GLUE device to use object_initialize_child().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:22:49 +02:00
Mark Cave-Ayland
8e0932802f q800: move GLUE device into separate q800-glue.c file
This will allow the q800-glue.h header to be included separately so that the
GLUE device can be referenced externally.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-8-mark.cave-ayland@ilande.co.uk>
[lv: update comment]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:21:57 +02:00
Mark Cave-Ayland
0b9b41fb8b q800: move ROM memory region to Q800MachineState
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:00:12 +02:00
Mark Cave-Ayland
36e2e338b3 q800: move CPU object into Q800MachineState
Also change the instantiation of the CPU to use object_initialize_child()
followed by a separate realisation.
Restrict valid CPU types to m68040.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-6-mark.cave-ayland@ilande.co.uk>
[lv: update commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 09:00:00 +02:00
Mark Cave-Ayland
a8019229c4 q800: introduce Q800MachineState
This provides an overall container and owner for Machine-related objects such
as MemoryRegions.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22 08:57:02 +02:00
Peter Maydell
c5ffd16ba4 Revert "cputlb: Restrict SavedIOTLB to system emulation"
This reverts commit d7ee93e243.

That commit tries to make a field in the CPUState struct not be
present when CONFIG_USER_ONLY is set.  Unfortunately, you can't
conditionally omit fields in structs like this based on ifdefs that
are set per-target.  If you try it, then code in files compiled
per-target (where CONFIG_USER_ONLY is or can be set) will disagree
about the struct layout with files that are compiled once-only (where
this kind of ifdef is never set).

This manifests specifically in 'make check-tcg' failing, because code
in cpus-common.c that sets up the CPUState::cpu_index field puts it
at a different offset from the code in plugins/core.c in
qemu_plugin_vcpu_init_hook() which reads the cpu_index field.  The
latter then hits an assert because from its point of view every
thread has a 0 cpu_index. There might be other weird behaviour too.

Mostly we catch this kind of bug because the CONFIG_whatever is
listed in include/exec/poison.h and so the reference to it in
build-once source files will then cause a compiler error.
Unfortunately CONFIG_USER_ONLY is an exception to that: we have some
places where we use it in "safe" ways in headers that will be seen by
once-only source files (e.g.  ifdeffing out function prototypes) and
it would be a lot of refactoring to be able to get to a position
where we could poison it.  This leaves us in a "you have to be
careful to walk around the bear trap" situation...

Fixes: d7ee93e243 ("cputlb: Restrict SavedIOTLB to system emulation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230620175712.1331625-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-21 07:19:46 +02:00
Philippe Mathieu-Daudé
d7ee93e243 cputlb: Restrict SavedIOTLB to system emulation
Commit 2f3a57ee47 ("cputlb: ensure we save the IOTLB data in
case of reset") added the SavedIOTLB structure -- which is
system emulation specific -- in the generic CPUState structure.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20 10:02:14 +02:00
Philippe Mathieu-Daudé
708906dcd6 exec/cpu-defs: Check for SOFTMMU instead of !USER_ONLY
We want to check the softmmu tlb availability, not
if we are targetting system emulation. Besides, this
code could be used by user emulation in the future.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605230216.17202-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20 10:01:30 +02:00
Philippe Mathieu-Daudé
75fe97b429 hw/core/cpu: Check for USER_ONLY definition instead of SOFTMMU one
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.

Invert the #ifdef'ry in TCGCPUOps structure for clarity.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20 10:01:30 +02:00
Sergey Kambalin
074259c0f2 hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware property
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
 really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19 15:27:21 +01:00
Sergey Kambalin
5dc496363a hw/misc/bcm2835_property: Replace magic frequency values by definitions
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-4-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 4/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19 15:27:21 +01:00
Sergey Kambalin
089ec16010 hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h'
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-2-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 1/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19 15:27:21 +01:00
Martin Kaiser
bd96e10071 imx_serial: set wake bit when we receive a data byte
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.

This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.

The wake bit can be configured as an interrupt source. Support this
mechanism as well.

Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19 11:35:58 +01:00
Vikram Garhwal
733766cd37 hw/arm: introduce xenpvh machine
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.

Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.

Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
    -chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
    -tpmdev emulator,id=tpm0,chardev=chrtpm \
    -machine tpm-base-addr=0x0c000000 \

swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
    mkdir /tmp/vtpm2
    swtpm socket --tpmstate dir=/tmp/vtpm2 \
    --ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &

Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15 16:46:47 -07:00
Stefano Stabellini
420927c218 include/hw/xen/xen_common: return error from xen_create_ioreq_server
This is done to prepare for enabling xenpv support for ARM architecture.
On ARM it is possible to have a functioning xenpv machine with only the
PV backends and no IOREQ server. If the IOREQ server creation fails,
continue to the PV backends initialization.

Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
2023-06-15 16:46:03 -07:00
Stefano Stabellini
f17068c1c7 xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
This patch does following:
1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in
    preparation for moving most of xen-hvm code to an arch-neutral location,
    move the x86-specific portion of xen_set_memory to arch_xen_set_memory.
    Also, move handle_vmport_ioreq to arch_handle_ioreq.

2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c
    Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to
    hw/xen/xen-hvm-common.c. These common functions are useful for creating
    an IOREQ server.

    xen_hvm_init_pc() contains the architecture independent code for creating
    and mapping a IOREQ server, connecting memory and IO listeners, initializing
    a xen bus and registering backends. Moved this common xen code to a new
    function xen_register_ioreq() which can be used by both x86 and ARM machines.

    Following functions are moved to hw/xen/xen-hvm-common.c:
        xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(),
        xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(),
        xen_device_realize(), xen_device_unrealize(),
        cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(),
        do_outp(), rw_phys_req_item(), read_phys_req_item(),
        write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(),
        cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(),
        handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(),
        xen_hvm_change_state_handler(), xen_exit_notifier(),
        xen_map_ioreq_server(), destroy_hvm_domain() and
        xen_shutdown_fatal_error()

3. Removed static type from below functions:
    1. xen_region_add()
    2. xen_region_del()
    3. xen_io_add()
    4. xen_io_del()
    5. xen_device_realize()
    6. xen_device_unrealize()
    7. xen_hvm_change_state_handler()
    8. cpu_ioreq_pio()
    9. xen_exit_notifier()

4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen.

Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15 16:45:59 -07:00
Richard Henderson
7efd65423a Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
 * Move zc* out of the experimental properties
 * Mask the implicitly enabled extensions in isa_string based on priv version
 * Rework CPU extension validation and validate MISA changes
 * Fixup PMP TLB cacheing errors
 * Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
 * Fixup PMP bypass checks
 * Deny access if access is partially inside a PMP entry
 * Correct OpenTitanState parent type/size
 * Fix QEMU crash when NUMA nodes exceed available CPUs
 * Fix pointer mask transformation for vector address
 * Updates and improvements for Smstateen
 * Support disas for Zcm* extensions
 * Support disas for Z*inx extensions
 * Remove unused decomp_rv32/64 value for vector instructions
 * Enable PC-relative translation
 * Assume M-mode FW in pflash0 only when "-bios none"
 * Support using pflash via -blockdev option
 * Add vector registers to log
 * Clean up reference of Vector MTYPE
 * Remove the check for extra Vector tail elements
 * Smepmp: Return error when access permission not allowed in PMP
 * Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
 gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
 LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
 F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
 jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
 WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
 Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
 N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
 Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
 zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
 Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
 uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
 =fOTc
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for 8.1

* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
  hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
  target/riscv: Smepmp: Return error when access permission not allowed in PMP
  target/riscv/vector_helper.c: Remove the check for extra tail elements
  target/riscv/vector_helper.c: clean up reference of MTYPE
  target/riscv: Fix initialized value for cur_pmmask
  util/log: Add vector registers to log
  docs/system: riscv: Add pflash usage details
  riscv/virt: Support using pflash via -blockdev option
  hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
  target/riscv: Remove pc_succ_insn from DisasContext
  target/riscv: Enable PC-relative translation
  target/riscv: Use true diff for gen_pc_plus_diff
  target/riscv: Change gen_set_pc_imm to gen_update_pc
  target/riscv: Change gen_goto_tb to work on displacements
  target/riscv: Introduce cur_insn_len into DisasContext
  target/riscv: Fix target address to update badaddr
  disas/riscv.c: Remove redundant parentheses
  disas/riscv.c: Fix lines with over 80 characters
  disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
  disas/riscv.c: Support disas for Z*inx extensions
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-14 05:28:51 +02:00
Steve Sistare
b0182e537e exec/memory: Introduce RAM_NAMED_FILE flag
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target.  However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true.  This is
wrong, because the block has no named backing store, and its contents will
be lost.  To fix, ignore shared memory iff it is a named file.  Define a
new flag RAM_NAMED_FILE to distinguish this case.

Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13 11:28:58 +02:00
Joao Martins
f80929f3af exec/ram_addr: Return number of dirty pages in cpu_physical_memory_set_dirty_lebitmap()
In preparation for including the number of dirty pages in the
vfio_get_dirty_bitmap() tracepoint, return the number of dirty pages in
cpu_physical_memory_set_dirty_lebitmap() similar to
cpu_physical_memory_sync_dirty_bitmap().

To avoid counting twice when GLOBAL_DIRTY_RATE is enabled, stash the
number of bits set per bitmap quad in a variable (@nbits) and reuse it
there.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230530180556.24441-2-joao.m.martins@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13 11:28:58 +02:00
Bernhard Beschow
9cc44d9bd6 hw/char/parallel-isa: Export struct ISAParallelState
Allows the struct to be embedded directly into device models without additional
allocation.

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-3-shentey@gmail.com>
[PMD: Update MAINTAINERS entry and use SPDX license identifier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13 11:28:58 +02:00
Bernhard Beschow
8ff98e09f3 hw/char/parallel: Export struct ParallelState
Exporting ParallelState is a precondition for exporing TYPE_ISA_PARALLEL to be
performed in the next patch.

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13 11:28:58 +02:00
Ivan Klokov
b84694defb util/log: Add vector registers to log
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.

Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:42:01 +10:00
Weiwei Li
d02eb5bcde disas: Change type of disassemble_info.target_info to pointer
Use pointer to pass more information of target to disasembler,
such as pass cpu.cfg related information in following commits.

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:25:47 +10:00
Philippe Mathieu-Daudé
a828ba9d46 hw/riscv/opentitan: Correct OpenTitanState parent type/size
OpenTitanState is the 'machine' (or 'board') state: it isn't
a SysBus device, but inherits from the MachineState type.
Correct the instance size.
Doing so we  avoid leaking an OpenTitanState pointer in
opentitan_machine_init().

Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-6-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:19:42 +10:00
Philippe Mathieu-Daudé
8696b74a6f hw/riscv/opentitan: Explicit machine type definition
Expand the DEFINE_MACHINE() macro, converting the class_init()
handler.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-5-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:18:54 +10:00
Philippe Mathieu-Daudé
264495f948 hw/riscv/opentitan: Add TYPE_OPENTITAN_MACHINE definition
QOM type names are usually defined as TYPE_FOO.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:18:06 +10:00
Richard Henderson
fdd0df5340 ppc patch queue for 2023-06-10:
This queue includes several assorted fixes for target/ppc emulation and
 XIVE2. It also includes an openpic fix, an avocado fix for ppc64
 binaries without slipr and a Kconfig change for MAC_NEWWORLD.
 -----BEGIN PGP SIGNATURE-----
 
 iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
 MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
 i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
 =EezE
 -----END PGP SIGNATURE-----

Merge tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2023-06-10:

This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.

# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
# i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
# =EezE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 10 Jun 2023 06:29:30 AM PDT
# gpg:                using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg:                issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28  3819 3CD9 CA96 DE03 3164

* tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu: (29 commits)
  hw/ppc/Kconfig: MAC_NEWWORLD should always select USB_OHCI_PCI
  target/ppc: Implement gathering irq statistics
  tests/avocado/tuxrun_baselines: Fix ppc64 tests for binaries without slirp
  hw/ppc/openpic: Do not open-code ROUND_UP() macro
  target/ppc: Decrementer fix BookE semantics
  target/ppc: Fix decrementer time underflow and infinite timer loop
  target/ppc: Rework store conditional to avoid branch
  target/ppc: Remove larx/stcx. memory barrier semantics
  target/ppc: Ensure stcx size matches larx
  target/ppc: Fix lqarx to set cpu_reserve
  target/ppc: Eliminate goto in mmubooke_check_tlb()
  target/ppc: Change ppcemb_tlb_check() to return bool
  target/ppc: Simplify ppcemb_tlb_search()
  target/ppc: Remove some unneded line breaks
  target/ppc: Move ppcemb_tlb_search() to mmu_common.c
  target/ppc: Remove "ext" parameter of ppcemb_tlb_check()
  target/ppc: Remove single use function
  target/ppc: PMU implement PERFM interrupts
  target/ppc: Support directed privileged doorbell interrupt (SDOOR)
  target/ppc: Fix msgclrp interrupt type
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-10 07:25:00 -07:00
Philippe Mathieu-Daudé
8e67403a2c hw/ppc/openpic: Do not open-code ROUND_UP() macro
While reviewing, the ROUND_UP() macro is easier to figure out.
Besides, the comment confirms we want to round up here.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230523061546.49031-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10 10:19:24 -03:00
Frederic Barrat
afca92071f pnv/xive2: Introduce macros to manipulate TIMA addresses
TIMA addresses are somewhat special and are split in several bit
fields with different meanings. This patch describes it and introduce
macros to more easily access the various fields.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230601121331.487207-5-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10 10:19:24 -03:00
Michael Tokarev
40b89515d0 spelling: information
3 trivial fixes: 2 .json comments which goes to
executables, and 1 .h file comment.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-09 23:38:16 +03:00
Bernhard Beschow
f8790f81eb hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of
TYPE_PIIX3_DEVICE. Remove this redundancy.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-7-shentey@gmail.com>
Message-Id: <20230403074124.3925-8-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07 15:07:10 +01:00
Bernhard Beschow
27047bd266 include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.

Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
Message-Id: <20230403074124.3925-2-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07 15:07:10 +01:00
David Woodhouse
2f20b1732d xen: Drop support for Xen versions below 4.7.1
In restructuring to allow for internal emulation of Xen functionality,
I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly
removing support for anything older than 4.7.1, which is also ancient
but it does still build, and the compatibility support for it is fairly
unintrusive.

Fixes: 15e283c5b6 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230412185102.441523-4-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07 15:07:10 +01:00
Richard Henderson
f5e6786de4 target-arm queue:
* Support gdbstub (guest debug) in HVF
  * xnlx-versal: Support CANFD controller
  * bpim2u: New board model: Banana Pi BPI-M2 Ultra
  * Emulate FEAT_LSE2
  * allow DC CVA[D]P in user mode emulation
  * trap DCC access in user mode emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
 fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
 TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
 bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
 njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
 lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
 pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
 zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
 iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
 Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
 MzinCABXHcovJbGbxZ9j6w==
 =8SdN
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Support gdbstub (guest debug) in HVF
 * xnlx-versal: Support CANFD controller
 * bpim2u: New board model: Banana Pi BPI-M2 Ultra
 * Emulate FEAT_LSE2
 * allow DC CVA[D]P in user mode emulation
 * trap DCC access in user mode emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
# fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
# TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
# 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
# bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
# njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
# lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
# pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
# zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
# iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
# Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
# MzinCABXHcovJbGbxZ9j6w==
# =8SdN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Jun 2023 02:47:17 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
  target/arm: trap DCC access in user mode emulation
  tests/tcg/aarch64: add DC CVA[D]P tests
  target/arm: allow DC CVA[D]P in user mode emulation
  target/arm: Enable FEAT_LSE2 for -cpu max
  tests/tcg/multiarch: Adjust sigbus.c
  tests/tcg/aarch64: Use stz2g in mte-7.c
  target/arm: Move mte check for store-exclusive
  target/arm: Relax ordered/atomic alignment checks for LSE2
  target/arm: Add SCTLR.nAA to TBFLAG_A64
  target/arm: Check alignment in helper_mte_check
  target/arm: Pass single_memop to gen_mte_checkN
  target/arm: Pass memop to gen_mte_check1*
  target/arm: Hoist finalize_memop out of do_fp_{ld, st}
  target/arm: Hoist finalize_memop out of do_gpr_{ld, st}
  target/arm: Load/store integer pair with one tcg operation
  target/arm: Sink gen_mte_check1 into load/store_exclusive
  target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r
  target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G
  target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld}
  target/arm: Use tcg_gen_qemu_ld_i128 for LDXP
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06 12:11:34 -07:00