Move the NVIC specific bits of reset to the NVIC's own
reset function, rather than using ifdefs in the common
arm_gic reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the special casing of NCPU=1 for the NVIC. This slightly
increases the amount of memory used by its state structure,
but removes some ifdeffery and means we can safely move the
GIC state into a common subclass structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some NVIC ifdefs from the gic_state struct and its
state save/load functions. This means there are some fields
in it which are present for the NVIC but not used, but means
it always has the same layout and can be pulled out into a
common subclass.
Note that the addition of irq_target[] to the save/load
struct for the NVIC requires a vmstate version bump.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
The function gic_set_pending_private() is now used by the NVIC
only (for the GIC we now set PPI interrupts via gpio lines and
gic_set_irq()). So make it #ifdef NVIC and remove the 'attribute
unused' annotation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now all the A profile cores have been switched to use the standalone
sysbus GIC, the only remaining code which #includes arm_gic.c is
the v7M NVIC. The coupling is much closer here so it's not so
easily disentangled. For now, add a comment about how arm_gic.c
is compiled, and assume that the NVIC always includes arm_gic.c
and the non-NVIC GIC is always compiled standalone.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make gic_reset a sysbus reset function, so we actually
reset the GIC on system reset rather than only at init.
For the NVIC this requires us also to implement reset
of the SysTick.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compile arm_gic.c as a standalone C file to produce a self contained
sysbus GIC device. Support the legacy usage by #include of the .c file
by making those users #define LEGACY_INCLUDED_GIC, so we can convert
them one by one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Evgeny Voevodin <e.voevodin@samsung.com>
Expose the Private Peripheral Interrupt inputs as GPIO inputs.
The layout of the GPIO array is thus:
[0..N-1] SPIs
[N..N+31] PPIs for CPU 0
[N+32..N+63] PPIs for CPU 1
...
Treating PPIs as being another kind of input line is in line with the
GIC architecture specification, where they are clearly described that
way. The 11MPCore TRM is a bit more ambiguous, but there is no practical
difference between "set PPI X as pending" and "0->1 transition on a
PPI input line configured as edge triggered", and PPIs are always
edge triggered, so this change won't affect behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the gic_get_current_cpu() function into arm_gic.c.
There are only two implementations: (1) "get the index
of the currently executing CPU", used by all multicore
GICs, and (2) "always 0", used by all GICs instantiated
with a single CPU interface (the Realview board GIC and
the v7M NVIC). So we can move this into the main GIC
source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Evgeny Voevodin <e.voevodin@samsung.com>
Move the NCPU definition to arm_gic.c: the maximum number
of CPU interfaces is defined by the GIC architecture specification
to be 8, so we don't need to have this #define in each of the
sources files which currently includes arm_gic.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Evgeny Voevodin <e.voevodin@samsung.com>
In the ARM per-CPU peripherals (GIC, private timers, SCU, etc),
remove workarounds for subpage memory region read/write functions
being passed offsets from the start of the page rather than the
start of the region. Following commit 5312bd8b3 the masking off
of high bits of the address offset is now harmless but unnecessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We currently assume that the number of interrupts (ITLinesNumber in
the architecture reference manual) is divisible by 32, since we
present it to the guest when it reads GICD_TYPER (in gic_dist_readb())
as (N / 32) - 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Interrupts numbers 0-31 are private to the processor interface, 32-1019 are
general interrupts. Add GIC_INTERNAL and substitute everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[Peter Maydell: converted some tabs to spaces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement handling for the RAZ/WI gic security registers.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the ARM GIC CPU interfaces as memory regions, rather than
just providing read and write functions for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The first enable set/clear register (which controls the PPIs and SGIs)
is supposed to be banked for each processor. Currently it is just
handled globally and this prevents recent SMP Linux kernels from
booting, because CPU0 stops receiving localtimer interrupts when CPU1
disables them locally.
To fix this, allow the enable bits to be enabled per-cpu. For SPIs,
always enable/disable ALL_CPU_MASK.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
irq_target array saving/loading is in the wrong loop.
Version bump.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix selection of target list filter mode.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.
This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow the user to specify the number of cores present on the
RealView EB + ARM11MPCore board. Also split into its own config
rather than guessing from the CPU name.
Signed-off-by: Paul Brook <paul@codesourcery.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have both IRQ sinks and GPIO inputs. These are in principle exactly
the same thing, so remove the former.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Found while cleaning up compiler warnings: GIC_*_LEVEL macros strongly
suggest that gic_irq_state.level is intended to be per-CPU and not just
a single, global bit. I'm unable to test the effect, but it seems to be
the most reasonable fix for the apparent brokenness.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6765 c046a42c-6fe2-441c-8c8c-71466251a162
