Commit Graph

235 Commits

Author SHA1 Message Date
Blue Swirl
e141ab52d2 softmmu templates: optionally pass CPUState to memory access functions
Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.

On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18 12:21:52 +00:00
Andreas Färber
9349b4f9fd Rename CPUState -> CPUArchState
Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:27 +01:00
Stefan Weil
dba4f1bcc3 w64: Change data type of parameters for flush_icache_range
The TCG targets i386 and tci needed a change of the function
prototype for w64.

This change is currently not needed for the other TCG targets,
but it can be applied to avoid code differences.

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-03 18:10:21 +00:00
Richard Henderson
2a534aff30 tcg: Use TCGReg for standard tcg-target entry points.
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14 17:47:27 +01:00
Richard Henderson
771142c2a7 tcg: Standardize on TCGReg as the enum for hard registers
Most targets did not name the enum; tci used TCGRegister.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14 17:47:26 +01:00
Stefan Weil
840f58617b tcg: Don't declare TCG_TARGET_REG_BITS in tcg-target.h
It is now declared for all tcg targets in tcg.h,
so the tcg target specific declarations are redundant.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01 06:11:12 +00:00
Richard Henderson
25c4d9cc84 tcg: Always define all of the TCGOpcode enum members.
By always defining these symbols, we can eliminate a lot of ifdefs.

To allow this to be checked reliably, the semantics of the
TCG_TARGET_HAS_* macros must be changed from def/undef to true/false.
This allows even more ifdefs to be removed, converting them into
C if statements.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21 18:52:24 +00:00
Stefan Weil
ea15fb0672 tcg/mips: Fix regression caused by typo (copy + paste bug)
cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()

The unpatched code won't compile on mips hosts starting with commit
cea5f9a28f.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 21:03:37 +00:00
Blue Swirl
614f104dfd Delegate setup of TCG temporaries to targets
Delegate TCG temp_buf setup to targets, so that they can use a stack
frame later instead.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:43 +00:00
Blue Swirl
cea5f9a28f cpu-exec.c: avoid AREG0 use
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.

Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.

Revert the hacks to avoid AREG0 use on Sparc hosts.

Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.

Compile the file without HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:38 +00:00
Brad
03938c133e Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD.
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD
to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures.

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03 18:23:53 +02:00
Aurelien Jarno
5677903453 tcg arm/mips/ia64: add a comment about retranslation and caches
Add a comment about cache coherency and retranslation, so that people
developping new targets based on existing ones are warned of the issue.

Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-12 00:06:07 +01:00
Aurelien Jarno
d43ffce140 tcg/mips: fix branch target change during code retranslation
TCG on MIPS was trying to avoid changing the branch offset, but didn't
due to a stupid typo. Fix it.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-08 16:41:43 +01:00
Richard Henderson
e4d58b41f9 tcg: Make some tcg-target.c routines static.
Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 11:18:26 +02:00
Richard Henderson
3b6dac3416 tcg: Add TYPE parameter to tcg_out_mov.
Mirror tcg_out_movi in having a TYPE parameter.  This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.

Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.

Update all targets to match.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 11:18:25 +02:00
Stefan Weil
60bf84cf4c tcp/mips: Change TCG_AREG0 (fp -> s0)
Register fp (frame pointer) is a bad choice for compilations
without optimisation, because the compiler makes heavy use
of this register (so the resulting code crashes).

Register s0 had been used for TCG_AREG1 in earlier releases,
but was no longer used and is now free for TCG_AREG0.

The resulting code works for compilations without
optimisation (tested with qemu mips in qemu mips
on x86 host).

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-14 00:59:42 +02:00
Aurelien Jarno
116348def2 tcg/mips: use seb/seh instructions on MIPS32R2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05 15:16:44 +02:00
Aurelien Jarno
ba0d89bbeb tcg/mips: fix 64-bit linux-user on big endian MIPS
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05 15:16:44 +02:00
Paul Brook
355b194369 Split TLB addend and target_phys_addr_t
Historically the qemu tlb "addend" field was used for both RAM and IO accesses,
so needed to be able to hold both host addresses (unsigned long) and guest
physical addresses (target_phys_addr_t).  However since the introduction of
the iotlb field it has only been used for RAM accesses.

This means we can change the type of addend to unsigned long, and remove
associated hacks in the big-endian TCG backends.

We can also remove the host dependence from target_phys_addr_t.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05 00:28:53 +01:00
Aurelien Jarno
6d8ff4d85c tcg/mips: fix branch offset during retranslation
Branch offsets should only be overwritten during relocation, to support
partial retranslation.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-29 02:09:23 +02:00
Aurelien Jarno
cc01cc8ea2 tcg-mips: add guest base support
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27 17:31:04 +01:00
Aurelien Jarno
489722cf3f tcg/mips: implement the not_i32 op the same way as gcc
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27 16:50:55 +01:00
Aurelien Jarno
2b79487a56 tcg-mips: implement nor
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27 16:32:55 +01:00
Richard Henderson
86feb1c860 tcg: Disambiguate qemu_ld32u with 32-bit and 64-bit outputs.
Some targets (e.g. Alpha and MIPS64) need to keep 32-bit operands
sign-extended in 64-bit registers (regardless of the "real" sign
of the operand).  For that, we need to be able to distinguish
between a 32-bit load with a 32-bit result and a 32-bit load with
a given extension to a 64-bit result.  This distinction already
exists for the ld* loads, but not the qemu_ld* loads.

Reserve qemu_ld32u for 64-bit outputs and introduce qemu_ld32 for
32-bit outputs.  Adjust all code generators to match.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 23:01:03 +01:00
Richard Henderson
32d98fbd10 tcg: Allow target-specific implementation of NOR.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 21:52:44 +01:00
Richard Henderson
9940a96bc8 tcg: Allow target-specific implementation of NAND.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 21:44:40 +01:00
Richard Henderson
8d625cf1d1 tcg: Allow target-specific implementation of EQV.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 21:42:46 +01:00
Richard Henderson
8a56e84091 tcg: Use TCGCond where appropriate.
Use the TCGCond enumeration type in the brcond and setcond
related prototypes in tcg-op.h and each code generator.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 21:29:08 +01:00
Richard Henderson
a975160954 tcg: Name the opcode enumeration.
Give the enumeration formed from tcg-opc.h a name: TCGOpcode.
Use that enumeration type instead of "int" whereever appropriate.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 21:28:24 +01:00
Paolo Bonzini
a63b5829af remove remaining occurrences AREG[1-9] and TCG_AREG[1-9]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 20:48:30 +01:00
Richard Henderson
3682825669 tcg: Add comments for all optional instructions not implemented.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-20 08:35:12 +00:00
Aurelien Jarno
cca1af8c4d tcg/mips: fix crash in tcg_out_qemu_ld()
The address register is overriden when it corresponds to v0 and the fast
path is taken, which leads to a crash. Fix that by using the a0 register
instead.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09 22:54:22 +01:00
Aurelien Jarno
434254aa5f tcg/mips: implement setcond2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09 01:01:35 +01:00
Aurelien Jarno
4cb2638218 tcg/mips: implement setcond
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-08 16:37:37 +01:00
Aurelien Jarno
afa05235a5 tcg: initial mips support
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>

A few words about design choices:
* Two registers, at and t0, are reserved for TCG internal use. They are
  useful for bswap and 64-bit ops.
* Most ops supports a constant argument with value 0, which is actually
  mapped to the zero register.
* While the at register is available for constant loading, ops only
  support a limited range of constants. TCG does a better job doing the
  register allocation and constant loading by itself. There are plenty of
  registers available anyway.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-01 00:06:15 +00:00