A few error handlings are missing because we ignore the subprocess exit
code, for example "docker build" errors are currently ignored.
Introduce _do_check() aside the existing _do() method and use it in a
few places.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-3-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The **kwargs can do this just well.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When trying to debug problems with tests it is natural to set
DEBUG=1 when starting the docker environment. Unfortunately
this has a side-effect of enabling an eth0 network interface
in the container, which changes the operating environment of
the test suite. IOW tests with fail may suddenly start
working again if DEBUG=1 is set, due to changed network setup.
Add a separate NETWORK variable to allow enablement of
networking separately from DEBUG=1. This can be used in two
ways. To enable the default docker network backend
make docker-test-build@fedora NETWORK=1
while to enable a specific network backend, eg join the network
associated with the container 'wibble':
make docker-test-build@fedora NETWORK=container:wibble
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170713144352.2212-1-berrange@redhat.com>
[Drop the superfluous second $(subst ...). - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
There's no requirement for RSDP to be installed last
by the firmware, so in rare cases vmgen id test hits
a race: RSDP is there but VM GEN ID isn't.
To fix, switch to common boot sector infrastructure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Message-id: 1500046217-24597-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-file
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-9-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-udp
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-8-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this is only not a problem if the test is last in a suite,
otherwise it makes the following main_loop() calls to fail
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-7-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test that hbitmap iter is resistant to bitmap resetting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 181 only works for formats which support live migration (naturally,
as it is a live migration test). Disable it for all formats which do
not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170621131157.16584-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 138 and 158 iotests exercise the legacy qcow2 aes encryption
code path and they work fine with qcow v1 too.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-16-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 048 is designed to verify data preservation during an
image resize. The qcow (v1) format impl has never supported
resize so always fails.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 042 is designed to verify operation with zero sized images.
Such images are not supported with qcow (v1), so this test has
always failed.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In QEMU's main_loop() we used to check whether we should do
a nonblocking call to main_loop(); this was deleted in commit e330c118f2,
because now that vCPUs always drop the I/O thread lock it is an unnecessary
optimization.
The loop in test-char.c copied the old QEMU main_loop() code, but
here the nonblocking check has never been necessary because this
standalone test case doesn't hold the I/O lock anyway. Remove it,
so we can drop the main_loop_wait() return value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1498584769-12439-2-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We dropped some dead code, update extected table binaries.
Fixes: 4d7e7f2702 ("hw/acpi: remove dead acpi code")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following tests are implemented:
* test that a GUID passed in by command line is propagated to the guest.
Read the GUID from guest memory
* test that the "auto" argument to the GUID generates a valid GUID, as
seen by the guest.
* test that a GUID passed in can be queried from the monitor
This patch is loosely based on a previous patch from:
Gal Hammer <ghammer@redhat.com> and Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJZVlttEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaSJQf/
aKBxpeES6l4zYoa09+x7eJwjQXj6RdIpUNL5N4a/dhUsVJ2keWo6lPcjC/kcbwPR
TJ4zYplm+suVzbNZG4XJGXLryo6ODIaHhpa/Ctsf3i6vQkRipxManpTbqqnyjt/e
fAnwdFu0dFKbnqJECujDQgaZo1qWLuyZP++ZFt2kiZgOX/OdHpnQPH2U4l+22Cp6
LB2FAFv0TwDjxmzM6EuOjsuLr9Rq3ckx7CVoyCnZuWkcaqn3/2cXhdNDErUB1nl7
Pa/N3khz6PJs1Q8/H3GPH+BJHfORLRFR6dZ/eD8JU6qqBJfguvkSmi9cQUlbVsko
KEBqUmL+bKJaK257lkUkfg==
=wO2z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-pull-request' into staging
# gpg: Signature made Fri 30 Jun 2017 15:08:45 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-pull-request:
block: Exploit BDRV_BLOCK_EOF for larger zero blocks
block: Add BDRV_BLOCK_EOF to bdrv_get_block_status()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
