If a receiver returns zero, that means its queue is full and it will
notify us when room is available using qemu_flush_queued_packets().
Take note of that and disable that receiver until it flushes its queue.
This is a first step towards allowing can_receive() handlers to return
true even if no buffer space is available.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enable UFO on the host tap device if supported and allow setting UFO
on virtio-net in the guest.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This API allows virtio-net to enable various offload features on a
tap interface - e.g. to tell the host kernel it can pass up partial
checksums to userspace.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
tap_receive_raw() always prepends a vnet header if IFF_VNET_HDR is
enabled.
tap_receive() only prepends when the a header is required but the NIC
doesn't supply one.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Trivial patch to allow supplying a receive_raw function.
A future cleanup should combine this function pointer parameters into a
table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the case where a NIC and backend agree on a packet header format,
this API allows injecting packets which lack the agreed upon header.
We need this for sending our gratuitous ARP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows for the addition of a raw flag, and leaves the way open
for other flags too.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These lamely named functions allow virtio-net to query whether
IFF_VNET_HDR is enabled on a tap interface and inform the tap code
that virtio-net will supply packets with a vnet header.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is so as to allow APIs which operate on specific client types
without having to add a function table entry which is only implemented
by a single client type.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows people to disable the IFF_VNET_HDR flag, e.g. for debugging
purposes or if they know they may migrate the guest to a machine without
IFF_VNET_HDR support.
It also allows making the lack of IFF_VNET_HDR support an error
condition, e.g. in the case where a guest is being migrated from a host
which does support it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Re-factor things so that there is only one call site for
net_tap_fd_init().
Two concerns about the QemuOpts usage here - firstly, we set the script
arguments to their default value and, secondly, we set the ifname value
to the name allocated by the kernel if none is supplied. Are we okay
with such things ending up in writeconfig output?
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For now, we just add an empty header before writing and strip the header
after reading.
We really only want IFF_VNET_HDR when virtio_net is using it, but it
would significantly complicate matters to try and do that. There should
be little or no performance impact with always adding headers.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In future we will want to prepend a virtio_net header if the NIC didn't
supply one but IFF_VNET_HDR is enabled on the interface. This is most
easily achived by using writev() in all cases.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Making features dependent on the availability of newer versions if_tun.h
is going to get seriously clumsy, so let's just import the definitions
we need. It's only a small handful.
If and when we're comfortable depending on 2.6.30 headers, we can remove
this again.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new type for mac addresses.
Add function which sets the qemu default mac address if it finds the mac
address uninitialized (i.e. all zeros).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For NICs, net_init_client() returns the index into the NICInfo table.
qemu_opts_foreach() interprets non-zero as an error return an stops
iterating over the options.
So, if you have more than one '-net nic' on the command line, subsequent
'-net' options do not get processed.
Fix this by making net_client_init() only return non-zero if
net_init_client() returns an error.
Reported-by: Peter Lieven <pl@dlh.net>
Patchworks-ID: 35736
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we have re-factored the packet queue code, we can re-use
it for peer-to-peer also.
Patchworks-ID: 35520
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.
Patchworks-ID: 35511
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a 'peer' member to VLANClientState as an alternative
to a vlan. The idea being that packets are transfered directly
from peer clients rather than going through a vlan.
Patchworks-ID: 35516
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allows them to be cleaned up at shutdown.
This is pretty lame, but will eventually go away as we make vlans
the special case.
Patchworks-ID: 35518
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Same as for -net except for:
- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required
Patchworks-ID: 35517
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow net clients to be created which are not connected to any vlan.
This is needed by Gerd in order to allow adding -device nic, where
the absence of a vlan parameter will not imply vlan=0. Also needed
to allow adding a -netdevice option which doesn't connect the backend
to a vlan.
Patchworks-ID: 35513
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just use the name field instead since we now use the id paramater as
the name, if supplied. Only implication with this change is that if
id is not supplied, the value of the name paramater is used as an
id.
Patchworks-ID: 35512
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use id= in the same was as the current name= parameter; if both are
specified, id= is used.
Patchworks-ID: 35514
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Needed for e.g. looking up a file descriptor name using
monitor_get_fd() in net_init_tap()
Patchworks-ID: 35509
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This moves the code that depens on slirp under CONFIG_SLIRP again.
Patchworks-ID: 35372
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().
There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.
Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need net_client_init_from_opts() exported for this
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here is where we rely on qemu_opts_parse() to handle an empty string.
We could alternatively explicitly handle this here by using
qemu_opts_create() when we're not supplied any parameters, but its
cleaner this way.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we've ported everything over to QemuOpts, we can kill off
all the cruft in net_client_init().
Note, the 'channel' type requires special handling as it uses a
format that QemuOpts can't parse
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note, not incrementing nb_host_devs in net_init_dump() is intentional.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The net_vde_init() change is needed because we now pass NULL pointers
instead of empty strings for group/sock if they're not set.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some parameters are not valid with fd=. Rather than having a separate
parameter description table for validating fd=, it's easir to just
check for those invalid parameters later.
Note, the need to possible lookup a file descriptor name from the
monitor is the reason why all these init functions are passed a Monitor
pointer.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The handling of guestfwd and hostfwd requires the previous changes
to allow multiple values for each parameter. The only way to access
those multiple values is to use qemu_opt_foreach().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We use a table of network types to look up the initialization function
and parameter descriptions in net_client_init().
For now, we use QemuOpts for the 'none' and 'nic' types. Subsequent
patches port the other types too and the special casing is removed.
We're not parsing the full -net option string here as the type has
been stripped from the string, so we do not use qemu_opts_parse()
'firstname' facility. This will also be rectified in subsequent
patches.
No functional changes are introduced by this patch.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Diagnostic output goes to stderr, except when we're in a monitor
command, when it goes to the monitor instead.
config_error() implements this with a monitor argument: if it's
non-null, report there, else to stderr. This obliges us to pass the
monitor down various call chains, to make it available to
config_error().
The recently created qemu_error() doesn't need a monitor argument to
route output. Use it.
There's one user-visible difference: config_error() prepended "qemu: "
to a message bound for stderr. qemu_error() doesn't, which means the
prefix goes away with this commit. If such a prefix is desired for
stderr, then I figure it should be slapped on all error messages, not
just the ones that used to go through config_error().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Propagating errors up the call chain is tedious. In startup code, we
can take a shortcut: terminate the program. This is wrong elsewhere,
the monitor in particular.
config_error() tries to cater for both customers: it terminates the
program unless its mon parameter tells it it's working for the
monitor.
Its users need to return status anyway (unless passing a null mon
argument, which none do), which their users need to check. So this
automatic exit buys us exactly nothing useful. Only the dangerous
delusion that we can get away without returning status. Some of its
users fell for that. Their callers continue executing after failure
when working for the monitor.
This bites monitor command host_net_add in two places:
* net_slirp_init() continues after slirp_hostfwd(), slirp_guestfwd(),
or slirp_smb() failed, and may end up reporting success. This
happens for "host_net_add user guestfwd=foo": it complains about the
invalid guest forwarding rule, then happily creates the user network
without guest forwarding.
* net_client_init() can't detect slirp_guestfwd() failure, and gets
fooled by net_slirp_init() lying about success. Suppresses its
"Could not initialize device" message.
Add the missing error reporting, make sure errors are checked, and
drop the exit() from config_error().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
net_slirp_init() walks slirp_configs, and stops when it encounters one
that doesn't work. Instead of consuming slirp_configs members there,
consume them in the sole caller. This makes sure all are consumed.
Before, the tail starting with the non-working one was left in place,
where it made the next net_slirp_init() fail again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
zeroing a structure before using it is more common than zeroing after
using it. Also makes the setting of nd->used more obvious.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
