At this moment, arm_load_dtb() can free machine->fdt when
binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be
retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is
the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to
machine->fdt. And, in that case, the existing g_free(fdt) at the end of
arm_load_dtb() will make machine->fdt point to an invalid memory region.
Since monitor command 'dumpdtb' was introduced a couple of releases
ago, running it with any ARM machine that uses arm_load_dtb() will
crash QEMU.
Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead
of freeing 'fdt', assign it back to ms->fdt.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Fixes: bf353ad555 ("qmp/hmp, device_tree.c: introduce dumpdtb")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20230328165935.1512846-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 12148d442e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Guest driver might execute HW commands when shared buffers are not yet
allocated.
This could happen on purpose (malicious guest) or because of some other
guest/host address mapping error.
We need to protect againts such case.
Fixes: CVE-2022-1050
Reported-by: Raven <wxhusst@gmail.com>
Signed-off-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Message-Id: <20220403095234.2210-1-yuval.shaia.ml@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 31c4b6fb02)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a
valid value for the MTU, but a guest running ESXi 7.0 might try to
set it and fail the assert [0].
In the Linux kernel, dev->max_mtu itself is a valid value for the MTU
and for the vmxnet3 driver it's 9000, so a guest running Linux will
also fail the assert when trying to set an MTU of 9000.
VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer
allocations/accesses, so allowing the upper limit itself as a value
should be fine.
[0]: https://forum.proxmox.com/threads/114011/
Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 099a638281)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Without dt mode, device IOTLB notifier won't work since guest won't
send device IOTLB invalidation descriptor in this case. Let's fail
early instead of misbehaving silently.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Viktor Prutyanov <viktor@daynix.com>
Buglink: https://bugzilla.redhat.com/2156876
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-3-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 09adb0e021)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Without caching mode, MAP notifier won't work correctly since guest
won't send IOTLB update event when it establishes new mappings in the
I/O page tables. Let's fail the IOMMU notifiers early instead of
misbehaving silently.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Viktor Prutyanov <viktor@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-2-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit b8d78277c0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In vhost_svq_poll(), if vhost_svq_get_buf() fails due to a device
providing invalid descriptors, len is left uninitialized and returned
to the caller, potentally leaking stack data or causing undefined
behavior.
Fix this by initializing len to 0.
Found with GCC 13 and -fanalyzer (abridged):
../hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_svq_poll’:
../hw/virtio/vhost-shadow-virtqueue.c:538:12: warning: use of uninitialized value ‘len’ [CWE-457] [-Wanalyzer-use-of-uninitialized-value]
538 | return len;
| ^~~
‘vhost_svq_poll’: events 1-4
|
| 522 | size_t vhost_svq_poll(VhostShadowVirtqueue *svq)
| | ^~~~~~~~~~~~~~
| | |
| | (1) entry to ‘vhost_svq_poll’
|......
| 525 | uint32_t len;
| | ~~~
| | |
| | (2) region created on stack here
| | (3) capacity: 4 bytes
|......
| 528 | if (vhost_svq_more_used(svq)) {
| | ~
| | |
| | (4) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_poll’
(...)
| 528 | if (vhost_svq_more_used(svq)) {
| | ^~~~~~~~~~~~~~~~~~~~~~~~~
| | ||
| | |(8) ...to here
| | (7) following ‘true’ branch...
|......
| 537 | vhost_svq_get_buf(svq, &len);
| | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (9) calling ‘vhost_svq_get_buf’ from ‘vhost_svq_poll’
|
+--> ‘vhost_svq_get_buf’: events 10-11
|
| 416 | static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,
| | ^~~~~~~~~~~~~~~~~
| | |
| | (10) entry to ‘vhost_svq_get_buf’
|......
| 423 | if (!vhost_svq_more_used(svq)) {
| | ~
| | |
| | (11) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_get_buf’
|
(...)
|
‘vhost_svq_get_buf’: event 14
|
| 423 | if (!vhost_svq_more_used(svq)) {
| | ^
| | |
| | (14) following ‘false’ branch...
|
‘vhost_svq_get_buf’: event 15
|
|cc1:
| (15): ...to here
|
<------+
|
‘vhost_svq_poll’: events 16-17
|
| 537 | vhost_svq_get_buf(svq, &len);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (16) returning to ‘vhost_svq_poll’ from ‘vhost_svq_get_buf’
| 538 | return len;
| | ~~~
| | |
| | (17) use of uninitialized value ‘len’ here
Note by Laurent Vivier <lvivier@redhat.com>:
The return value is only used to detect an error:
vhost_svq_poll
vhost_vdpa_net_cvq_add
vhost_vdpa_net_load_cmd
vhost_vdpa_net_load_mac
-> a negative return is only used to detect error
vhost_vdpa_net_load_mq
-> a negative return is only used to detect error
vhost_vdpa_net_handle_ctrl_avail
-> a negative return is only used to detect error
Fixes: d368c0b052 ("vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush")
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230213085747.19956-1-clopez@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit e4dd39c699)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Not stopping them leave the device in a bad state when virtio-net
fronted device is unplugged with device_del monitor command.
This is not triggable in regular poweroff or qemu forces shutdown
because cleanup is called right after vhost_vdpa_dev_start(false). But
devices hot unplug does not call vdpa device cleanups. This lead to all
the vhost_vdpa devices without stop the SVQ but the last.
Fix it and clean the code, making it symmetric with
vhost_vdpa_svqs_start.
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230209170004.899472-1-eperezma@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 2e1a9de96b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mjt: this required manual edit for stable-7.2
The expiration time provided for timer_mod() can overflow if a
ridiculously large value is set to the comparator register. The
resulting value can represent a past time after rounded, forcing the
timer to fire immediately. If the timer is configured as periodic, it
will rearm the timer again, and form an endless loop.
Check if the expiration value will overflow, and if it will, stop the
timer instead of rearming the timer with the overflowed time.
This bug was found by Alexander Bulekov when fuzzing igb, a new
network device emulation:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_2d7036941dcda1ad4380bb8a9174ed0c949bcefd
Fixes: 16b29ae180 ("Add HPET emulation to qemu (Beth Kon)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230131030037.18856-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 37d2bcbc2a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors") I
fixed the virtio-rng-pci migration compatibility, but it was discovered
that we also need to fix the other aliases of the device for the
transitional cases.
Fixes: 9ea02e8f1 ('virtio-rng-pci: Allow setting nvectors, so we can use MSI-X')
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2162569
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230207174944.138255-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 62bdb88715)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixup the migration compatibility for existing machine types
so that they do not enable msi-x.
Symptom:
(qemu) qemu: get_pci_config_device: Bad config data: i=0x34 read: 84 device: 98 cmask: ff wmask: 0 w1cmask:0
qemu: Failed to load PCIDevice:config
qemu: Failed to load virtio-rng:virtio
qemu: error while loading state for instance 0x0 of device '0000:00:03.0/virtio-rng'
qemu: load of migration failed: Invalid argument
Note: This fix will break migration from 7.2->7.2-fixed with this patch
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2155749
Fixes: 9ea02e8f1 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230109105809.163975-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Daney <david.daney@fungible.com>
Fixes: 9ea02e8f1 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")<br>
Signed-off-by: Dr. David Alan Gilbert <<a href="mailto:dgilbert@redhat.com" target="_blank">dgilbert@redhat.com</a>><br>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit bad9c5a516)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 821d28b88f ("vhost-user-rng: Add vhost-user-rng implementation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140516.78078-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit f0dac71596)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 7221d3b634 ("hw/virtio: add boilerplate for vhost-user-i2c device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140435.78049-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0126793bee)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_cleanup(), called from vu_gpio_disconnect(), clears vhost_dev
so vhost-user-gpio must set the members of vhost_dev each time
connecting.
do_vhost_user_cleanup() should also acquire the pointer to vqs directly
from VHostUserGPIO instead of referring to vhost_dev as it can be called
after vhost_dev_cleanup().
Fixes: 27ba7b027f ("hw/virtio: add boilerplate for vhost-user-gpio device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140320.77999-1-akihiko.odaki@daynix.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit daae36c13a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 67f7e426e5.
Additionally to the automatic revert, I went over the code
and dropped all mentions of legacy_no_rng_seed manually,
effectively reverting a combination of 2 additional commits:
commit ffe2d2382e
Author: Jason A. Donenfeld <Jason@zx2c4.com>
Date: Wed Sep 21 11:31:34 2022 +0200
x86: re-enable rng seeding via SetupData
commit 3824e25db1
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Aug 17 10:39:40 2022 +0200
x86: disable rng seeding via setup_data
Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 167f487358)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mjt: this required manual edit for stable-7.2
This reverts commit e935b73508.
Fixes: e935b73508 ("x86: return modified setup_data only if read as memory, not as file")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit ae80d81cfa)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit eebb38a563.
Fixes: eebb38a563 ("x86: use typedef for SetupData struct")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit ea96a78477)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 763a2828bf.
Fixes: 763a2828bf ("x86: reinitialize RNG seed on system reboot")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit fdc27ced04)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit cc63374a5a.
Fixes: cc63374a5a ("x86: re-initialize RNG seed when selecting kernel")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit b4bfa0a31d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 14b29fea74.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 14b29fea74 ("x86: do not re-randomize RNG seed on snapshot load")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit ef82d893de)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since table type 4 of SMBIOS version 2.6 is shorter than 3.0, the
strings which follow immediately after the struct fields have been
overwritten by unconditional filling of later fields such as core_count2.
Make these fields dependent on the SMBIOS version.
Fixes: 05e27d74c7 ("hw/smbios: add core_count2 to smbios table type 4")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2169904
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20230223125747.254914-1-jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 60d09b8dc7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Prior to reading the shadow doorbell cq head, we have to update the
eventidx. Otherwise, we risk that the driver will skip an mmio doorbell
write. This happens on riscv64, as reported by Guenter.
Adding the missing update to the cq eventidx fixes the issue.
Fixes: 3f7fe8de3d ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Cc: qemu-riscv@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit fa5db2aa16)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The eventidx and doorbell value are not handling endianness correctly.
Fix this.
Fixes: 3f7fe8de3d ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 2fda0726e5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Conflicts: hw/nvme/ctrl.c
The modern ACPI CPU hotplug interface was introduced in the following
series (aa1dd39ca307..679dd1a957df), released in v2.7.0:
1 abd49bc2ed docs: update ACPI CPU hotplug spec with new protocol
2 16bcab97eb pc: piix4/ich9: add 'cpu-hotplug-legacy' property
3 5e1b5d9388 acpi: cpuhp: add CPU devices AML with _STA method
4 ac35f13ba8 pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook
5 d2238cb678 acpi: cpuhp: implement hot-add parts of CPU hotplug
interface
6 8872c25a26 acpi: cpuhp: implement hot-remove parts of CPU hotplug
interface
7 76623d00ae acpi: cpuhp: add cpu._OST handling
8 679dd1a957 pc: use new CPU hotplug interface since 2.7 machine type
Before patch#1, "docs/specs/acpi_cpu_hotplug.txt" only specified 1-byte
accesses for the hotplug register block. Patch#1 preserved the same
restriction for the legacy register block, but:
- it specified DWORD accesses for some of the modern registers,
- in particular, the switch from the legacy block to the modern block
would require a DWORD write to the *legacy* block.
The latter functionality was then implemented in cpu_status_write()
[hw/acpi/cpu_hotplug.c], in patch#8.
Unfortunately, all DWORD accesses depended on a dormant bug: the one
introduced in earlier commit a014ed07bd ("memory: accept mismatching
sizes in memory_region_access_valid", 2013-05-29); first released in
v1.6.0. Due to commit a014ed07bd, the DWORD accesses to the *legacy*
CPU hotplug register block would work in spite of the above series *not*
relaxing "valid.max_access_size = 1" in "hw/acpi/cpu_hotplug.c":
> static const MemoryRegionOps AcpiCpuHotplug_ops = {
> .read = cpu_status_read,
> .write = cpu_status_write,
> .endianness = DEVICE_LITTLE_ENDIAN,
> .valid = {
> .min_access_size = 1,
> .max_access_size = 1,
> },
> };
Later, in commits e6d0c3ce68 ("acpi: cpuhp: introduce 'Command data 2'
field", 2020-01-22) and ae340aa3d2 ("acpi: cpuhp: spec: add typical
usecases", 2020-01-22), first released in v5.0.0, the modern CPU hotplug
interface (including the documentation) was extended with another DWORD
*read* access, namely to the "Command data 2" register, which would be
important for the guest to confirm whether it managed to switch the
register block from legacy to modern.
This functionality too silently depended on the bug from commit
a014ed07bd.
In commit 5d971f9e67 ('memory: Revert "memory: accept mismatching sizes
in memory_region_access_valid"', 2020-06-26), first released in v5.1.0,
the bug from commit a014ed07bd was fixed (the commit was reverted).
That swiftly exposed the bug in "AcpiCpuHotplug_ops", still present from
the v2.7.0 series quoted at the top -- namely the fact that
"valid.max_access_size = 1" didn't match what the guest was supposed to
do, according to the spec ("docs/specs/acpi_cpu_hotplug.txt").
The symptom is that the "modern interface negotiation protocol"
described in commit ae340aa3d2:
> + Use following steps to detect and enable modern CPU hotplug interface:
> + 1. Store 0x0 to the 'CPU selector' register,
> + attempting to switch to modern mode
> + 2. Store 0x0 to the 'CPU selector' register,
> + to ensure valid selector value
> + 3. Store 0x0 to the 'Command field' register,
> + 4. Read the 'Command data 2' register.
> + If read value is 0x0, the modern interface is enabled.
> + Otherwise legacy or no CPU hotplug interface available
falls apart for the guest: steps 1 and 2 are lost, because they are DWORD
writes; so no switching happens. Step 3 (a single-byte write) is not
lost, but it has no effect; see the condition in cpu_status_write() in
patch#8. And step 4 *misleads* the guest into thinking that the switch
worked: the DWORD read is lost again -- it returns zero to the guest
without ever reaching the device model, so the guest never learns the
switch didn't work.
This means that guest behavior centered on the "Command data 2" register
worked *only* in the v5.0.0 release; it got effectively regressed in
v5.1.0.
To make things *even more* complicated, the breakage was (and remains, as
of today) visible with TCG acceleration only. Commit 5d971f9e67 makes
no difference with KVM acceleration -- the DWORD accesses still work,
despite "valid.max_access_size = 1".
As commit 5d971f9e67 suggests, fix the problem by raising
"valid.max_access_size" to 4 -- the spec now clearly instructs the guest
to perform DWORD accesses to the legacy register block too, for enabling
(and verifying!) the modern block. In order to keep compatibility for the
device model implementation though, set "impl.max_access_size = 1", so
that wide accesses be split before they reach the legacy read/write
handlers, like they always have been on KVM, and like they were on TCG
before 5d971f9e67 (v5.1.0).
Tested with:
- OVMF IA32 + qemu-system-i386, CPU hotplug/hot-unplug with SMM,
intermixed with ACPI S3 suspend/resume, using KVM accel
(regression-test);
- OVMF IA32X64 + qemu-system-x86_64, CPU hotplug/hot-unplug with SMM,
intermixed with ACPI S3 suspend/resume, using KVM accel
(regression-test);
- OVMF IA32 + qemu-system-i386, SMM enabled, using TCG accel; verified the
register block switch and the present/possible CPU counting through the
modern hotplug interface, during OVMF boot (bugfix test);
- I do not have any testcase (guest payload) for regression-testing CPU
hotplug through the *legacy* CPU hotplug register block.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
Ref: "IO port write width clamping differs between TCG and KVM"
Link: http://mid.mail-archive.com/aaedee84-d3ed-a4f9-21e7-d221a28d1683@redhat.com
Link: https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg00199.html
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230105161804.82486-1-lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit dab30fbef3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It should be the variable rdl2 to revert the already-notified listeners.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221228090312.17276-1-chenyi.qiang@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
(cherry picked from commit 29f1b328e3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vmem->bitmap indexes the memory region of the virtio-mem backend at a
granularity of block_size. To calculate the index of target section offset,
the block_size should be divided instead of the bitmap_size.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221216062231.11181-1-chenyi.qiang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
(cherry picked from commit b11cf32e07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When vIOMMU is enabled, the vq->used_phys is actually the IOVA not
GPA. So we need to translate it to GPA before the syncing otherwise we
may hit the following crash since IOVA could be out of the scope of
the GPA log size. This could be noted when using virtio-IOMMU with
vhost using 1G memory.
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Tested-by: Lei Yang <leiyang@redhat.com>
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221216033552.77087-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 345cc1cbcb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 14dccc8ea6.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY4nPggAKCRBAov/yOSY+
36cRA/9JFWuDT0TDhu0g1x0ktvpV+1GBPzkEXR2CVhDf2bly1ka2cLEtPUpiSE8E
Osw9cEBR3qX+LyO3gA0GySUr9jsc/yRqD38OL8HGZTCmZ/qCnHJSXvy+6a0LWYQq
ZIrFat7UjiTTeErkSQ6C4bUIl6YoUUSP0X2XxO6YF5j4uhGyqA==
=sVrx
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu into staging
pull for 7.2-rc4
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY4nPggAKCRBAov/yOSY+
# 36cRA/9JFWuDT0TDhu0g1x0ktvpV+1GBPzkEXR2CVhDf2bly1ka2cLEtPUpiSE8E
# Osw9cEBR3qX+LyO3gA0GySUr9jsc/yRqD38OL8HGZTCmZ/qCnHJSXvy+6a0LWYQq
# ZIrFat7UjiTTeErkSQ6C4bUIl6YoUUSP0X2XxO6YF5j4uhGyqA==
# =sVrx
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Dec 2022 05:12:18 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221202' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: Add cfi01 pflash device
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* fixes for aio cancellation in commands that may issue several
aios
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmOI2uQACgkQTeGvMW1P
Dem6nQgAi8Dm0vhRLoEHqT6FG+VBy0Evpw2QThGE8PxsfzJ1nlwXt6s/NwEc10Uc
d5exp6AR9p37dGJfH82y8EYdEgMeJfsKQRDVMUR4n7eEOW+/Sp4WicO7iamEIWhr
CgRBw1aqU7Im0CHn+3nXu0LKXEtT+tOQrfnr255ELzCxKPZuP3Iw/+nzLQij1G4N
9D9FPPyec+blz+0HuRg12m1ri6TAb2k9CuODuZrqLDCW8Hnl1MVmmYGZrYBy9sPr
Q2zohAjad6R5/+4BCAlusbQ0deoXYKOJdb8J2A9EN73maSqjsHQAagfs+kKxAQK4
ttiy/M/l5EGJG496rZfUJZCnVlOllQ==
=Blzi
-----END PGP SIGNATURE-----
Merge tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme into staging
hw/nvme fixes
* fixes for aio cancellation in commands that may issue several
aios
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmOI2uQACgkQTeGvMW1P
# Dem6nQgAi8Dm0vhRLoEHqT6FG+VBy0Evpw2QThGE8PxsfzJ1nlwXt6s/NwEc10Uc
# d5exp6AR9p37dGJfH82y8EYdEgMeJfsKQRDVMUR4n7eEOW+/Sp4WicO7iamEIWhr
# CgRBw1aqU7Im0CHn+3nXu0LKXEtT+tOQrfnr255ELzCxKPZuP3Iw/+nzLQij1G4N
# 9D9FPPyec+blz+0HuRg12m1ri6TAb2k9CuODuZrqLDCW8Hnl1MVmmYGZrYBy9sPr
# Q2zohAjad6R5/+4BCAlusbQ0deoXYKOJdb8J2A9EN73maSqjsHQAagfs+kKxAQK4
# ttiy/M/l5EGJG496rZfUJZCnVlOllQ==
# =Blzi
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Dec 2022 11:48:36 EST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of git://git.infradead.org/qemu-nvme:
hw/nvme: remove copy bh scheduling
hw/nvme: fix aio cancel in dsm
hw/nvme: fix aio cancel in zone reset
hw/nvme: fix aio cancel in flush
hw/nvme: fix aio cancel in format
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
=ZkaX
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: regression fix
Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
# 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
# icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
# Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
# eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
# Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
# =ZkaX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Dec 2022 02:37:05 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
include/hw: VM state takes precedence in virtio_device_should_start
hw/virtio: generalise CHR_EVENT_CLOSED handling
hw/virtio: add started_vu status field to vhost-user-gpio
vhost: enable vrings in vhost_dev_start() for vhost-user devices
tests/qtests: override "force-legacy" for gpio virtio-mmio tests
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 796d20681d ("hw/nvme: reimplement the copy command to allow aio cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
When the DSM operation is cancelled asynchronously, we set iocb->ret to
-ECANCELED. However, the callback function only checks the return value
of the completed aio, which may have completed succesfully prior to the
cancellation and thus the callback ends up continuing the dsm operation
instead of bailing out. Fix this.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If the zone reset operation is cancelled but the block unmap operation
completes normally, the callback will continue resetting the next zone
since it neglects to check iocb->ret which will have been set to
-ECANCELED. Make sure that this is checked and bail out if an error is
present.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: 63d96e4ffd ("hw/nvme: reimplement zone reset to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure that iocb->aiocb is NULL'ed when cancelling.
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 38f4ac65ac ("hw/nvme: reimplement flush to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
There are several bugs in the async cancel code for the Format command.
Firstly, cancelling a format operation neglects to set iocb->ret as well
as clearing the iocb->aiocb after cancelling the underlying aiocb which
causes the aio callback to ignore the cancellation. Trivial fix.
Secondly, and worse, because the request is queued up for posting to the
CQ in a bottom half, if the cancellation is due to the submission queue
being deleted (which calls blk_aio_cancel), the req structure is
deallocated in nvme_del_sq prior to the bottom half being schedulued.
Fix this by simply removing the bottom half, there is no reason to defer
it anyway.
Fixes: 3bcf26d3d6 ("hw/nvme: reimplement format nvm to allow cancellation")
Reported-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-6-philmd@linaro.org>
Have qxl_get_check_slot_offset() return false if the requested
buffer size does not fit within the slot memory region.
Similarly qxl_phys2virt() now returns NULL in such case, and
qxl_dirty_one_surface() aborts.
This avoids buffer overrun in the host pointer returned by
memory_region_get_ram_ptr().
Fixes: CVE-2022-4144 (out-of-bounds read)
Reported-by: Wenxu Yin (@awxylitol)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1336
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-5-philmd@linaro.org>
Currently qxl_phys2virt() doesn't check for buffer overrun.
In order to do so in the next commit, pass the buffer size
as argument.
For QXLCursor in qxl_render_cursor() -> qxl_cursor() we
verify the size of the chunked data ahead, checking we can
access 'sizeof(QXLCursor) + chunk->data_size' bytes.
Since in the SPICE_CURSOR_TYPE_MONO case the cursor is
assumed to fit in one chunk, no change are required.
In SPICE_CURSOR_TYPE_ALPHA the ahead read is handled in
qxl_unpack_chunks().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-4-philmd@linaro.org>
Only 3 command types are logged: no need to call qxl_phys2virt()
for the other types. Using different cases will help to pass
different structure sizes to qxl_phys2virt() in a pair of commits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-2-philmd@linaro.org>
The only use of intel_hda_reset() is after its definition, so we
don't need to separately declare its prototype at the top of the
file; drop the unnecessary line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-3-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the intel-hda device has a reset method which manually
resets all the codecs by calling device_legacy_reset() on them. This
means they get reset twice, once because child devices on a qbus get
reset before the parent device's reset method is called, and then
again because we're manually resetting them.
Drop the manual reset call, and ensure that codecs are still reset
when the guest does a reset via ICH6_GCTL_RESET by using
device_cold_reset() (which resets all the devices on the qbus as well
as the device itself) instead of a direct call to the reset function.
This is a slight ordering change because the (only) codec reset now
happens before the controller registers etc are reset, rather than
once before and then once after, but the codec reset function
hda_audio_reset() doesn't care.
This lets us drop a use of device_legacy_reset(), which is
deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.
Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: effaf5a240
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105114851.306206-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
