Commit Graph

390 Commits

Author SHA1 Message Date
Emilio G. Cota
c5a49c63fa tcg: convert tb->cflags reads to tb_cflags(tb)
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.

Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.

Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:

FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
	 accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)

perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES

Then manually fixed the few errors that checkpatch reported.

Compile-tested for all targets.

Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:41 -07:00
Richard Henderson
55c3ceef61 qom: Introduce CPUClass.tcg_initialize
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.

Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 22:00:13 +02:00
David Hildenbrand
2bcf018340 s390x/tcg: low-address protection support
This is a neat way to implement low address protection, whereby
only the first 512 bytes of the first two pages (each 4096 bytes) of
every address space are protected.

Store a tec of 0 for the access exception, this is what is defined by
Enhanced Suppression on Protection in case of a low address protection
(Bit 61 set to 0, rest undefined).

We have to make sure to to pass the access address, not the masked page
address into mmu_translate*().

Drop the check from testblock. So we can properly test this via
kvm-unit-tests.

This will check every access going through one of the MMUs.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016202358.3633-3-david@redhat.com>
[CH: restored error message for access register mode]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
6bb6f19473 s390x: refactor error handling for MSCH handler
Simplify the error handling of the MSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
ae9f1be3bd s390x: refactor error handling for HSCH handler
Simplify the error handling of the HSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
773314426e s390x: refactor error handling for CSCH handler
Simplify the error handling of the CSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
963764081d s390x: refactor error handling for XSCH handler
Simplify the error handling of the XSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
66dc50f705 s390x: improve error handling for SSCH and RSCH
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end.  Let the code detecting the condition tell how it's
to be handled in a less ambiguous way.  It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.

For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception.  Same goes for
unexpected error codes and absence of required ORB flags.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Igor Mammedov
32dc6aa061 s390x: move s390x_new_cpu() into board code
s390-virtio-ccw.c is the sole user of s390x_new_cpu(),
so move this helper there.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508253203-119237-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Igor Mammedov
ac7e4cbbab s390x: fix cpu object referrence leak in s390x_new_cpu()
object_new() returns cpu with refcnt == 1 and after realize
refcnt == 2*. s390x_new_cpu() as an owner of the first refcnt
should have released it on exit in both cases (on error and
success) to avoid it leaking. Do so for both cases.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508247680-98800-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
741a4ec186 target/s390x: special handling when starting a CPU with WAIT PSW
When we try to start a CPU with a WAIT PSW, we have to take care that
TCG will actually try to continue executing instructions.

We must therefore really only unhalt the CPU if we don't have a WAIT
PSW. Also document the special order for restart interrupts, which
load a new PSW and change the state to operating.

To keep KVM working, simply don't have a look at the WAIT bit when
loading the PSW. Otherwise the behavior of a restart interrupt when
a CPU stopped would be changed.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-31-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
f74990a5d0 s390x/tcg: refactor stfl(e) to use s390_get_feat_block()
Refactor it to use s390_get_feat_block(). Directly write into the mapped
lowcore with stfl and make sure it is really only compiled if needed.

While at it, add an alignment check for STFLE and avoid
potential_page_fault() by properly restoring the CPU state.

Due to s390_get_feat_block(), we will now also indicate the
"Configuration-z-architectural-mode", which is with new SIGP code the
right thing to do.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-30-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
0fc60ca58a s390x/tcg: unlock NMI
Nothing hindering us anymore from unlocking the restart code (used for
NMI).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-29-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
ca26c5d32b s390x/cpumodel: allow to enable SENSE RUNNING STATUS for qemu
As we properly implement it, allow to enable it.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-28-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
11b0079cec s390x/tcg: switch to new SIGP handling code
This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
b376a5545a s390x/tcg: flush the tlb on SIGP SET PREFIX
Thanks to Aurelien Jarno for doing this in his prototype.

We can flush the whole TLB as this should happen really rarely.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-26-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
b1ab5f6068 s390x/tcg: implement STOP and RESET interrupts for TCG
Implement them like KVM implements/handles them. Both can only be
triggered via SIGP instructions. RESET has (almost) the lowest priority if
the CPU is running, and the highest if the CPU is STOPPED. This is handled
in SIGP code already. On delivery, we only have to care about the
"CPU running" scenario.

STOP is defined to be delivered after all other interrupts have been
delivered. Therefore it has the actual lowest priority.

As both can wake up a CPU if sleeping, indicate them correctly to
external code (e.g. cpu_has_work()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-25-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
a6880d213b s390x/tcg: implement SIGP CONDITIONAL EMERGENCY SIGNAL
Mostly analogous to the kernel/KVM version (so I assume the checks are
correct :) ). As a preparation for TCG.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-24-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
c50105d47c s390x/tcg: implement SIGP EMERGENCY SIGNAL
As preparation for TCG.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-23-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
070aa1a493 s390x/tcg: implement SIGP EXTERNAL CALL
As preparation for TCG.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-22-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
302230fc44 s390x/tcg: implement SIGP SENSE
Add it as preparation for TCG. Sensing could later be done completely
lockless.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-21-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
d1b468bc88 s390x/tcg: implement SIGP SENSE RUNNING STATUS
Preparation for TCG, for KVM is this is completely handled in the
kernel.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-20-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
3047f8b549 s390x/kvm: factor out actual handling of STOP interrupts
For KVM, the KVM module decides when a STOP can be performed (when the
STOP interrupt can be processed). Factor it out so we can use it
later for TCG.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-19-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
74b4c74d5e s390x/kvm: factor out SIGP code into sigp.c
We want to use the same code base for TCG, so let's cleanly factor it
out.

The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
a7a2b8e3d5 s390x/kvm: drop two debug prints
Preparation for moving it out of kvm.c.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
f875cb0c21 s390x/kvm: factor out storing of adtl CPU status
Called from SIGP code to be factored out, so let's move it. Add a
FIXME for TCG code in the future.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
cf729baaec s390x/kvm: factor out storing of CPU status
Factor it out into s390_store_status(), to be used also by TCG later on.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-14-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
eabcea18f8 s390x/kvm: generalize SIGP stop and restart interrupt injection
Preparation for factoring it out into !kvm code.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
27292ff18d s390x/kvm: pass ipb directly into handle_sigp()
No need to pass kvm_run. Pass parameters alphabetically ordered.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
c6892047dc target/s390x: interpret PSW_MASK_WAIT only for TCG
KVM handles the wait PSW itself and triggers a WAIT ICPT in case it
really wants to sleep (disabled wait).

This will later allow us to change the order of loading a restart
interrupt and setting a CPU to OPERATING on SIGP RESTART without
changing KVM behavior.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-11-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
f1cbfe6a73 s390x/tcg: handle WAIT PSWs during interrupt injection
If we encounter a WAIT PSW, we have to halt immediately. Using
cpu_loop_exit() at this point feels wrong. Simply leaving
cs->exception_index set doesn't result in an immediate stop.

This is also necessary to properly handle SIGP STOP interrupts later.

The CPU_INTERRUPT_HALT will be processed immediately and properly set
the CPU to halted (also resetting cs->exception_index to EXCP_HLT)

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-10-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
83f7f32901 target/s390x: factor out handling of WAIT PSW into s390_handle_wait()
This will now also detect crashes under TCG. We can directly use
cpu->env.psw.addr instead of kvm_run, as we do a cpu_synchronize_state().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
2b3394f13d s390x/tcg: a CPU cannot switch state due to an interrupt
Going to OPERATING here looks wrong. A CPU should even never be
!OPERATING at this point. Unhalting will already be done in
cpu_handle_halt() if there is work, so we can drop this statement
completely.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
4beab67146 s390x/tcg: STOPPED cpus can never wake up
Interrupts can't wake such CPUs up. SIGP from other CPUs has to be used
to toggle the state.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
9dec238826 s390x/tcg: take care of external interrupt subclasses
We can now let go of INTERRUPT_EXT. When cr0 changes, we have to
revalidate if we now have a pending external interrupt, just like
when the PSW (or SYSTEM MASK only) changes.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
8417f904ba s390x/tcg: rework checking for deliverable interrupts
Currently, enabling/disabling of interrupts is not really supported.

Let's improve interrupt handling code by explicitly checking for
deliverable interrupts only. This is the first step. Checking for
external interrupt subclasses will be done next.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
14ca122e75 s390x/tcg: injection of emergency signals and external calls
Preparation for new TCG SIGP code. Especially also prepare for
indicating that another external call is already pending.

Take care of interrupt priority.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
d516f74c99 s390x/tcg: cleanup service interrupt injection
There are still some leftovers from old virtio interrupts in there.
Most importantly, we don't have to queue service interrupts anymore.
Just like KVM, we can simply multiplex the SCLP service interrupts and
avoid the queue.

Also, now only valid parameters/cpu_addr will be stored on service
interrupts.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
David Hildenbrand
6482b0ffd1 s390x/tcg: turn INTERRUPT_EXT into a mask
External interrupts are currently all handled like floating external
interrupts, they are queued. Let's prepare for a split of floating
and local interrupts by turning INTERRUPT_EXT into a mask.

While we can have various floating external interrupts of one kind, there
is usually only one (or a fixed number) of the local external interrupts.

So turn INTERRUPT_EXT into a mask and properly indicate the kind of
external interrupt. Floating interrupts will have to moved out of
one CPU instance later once we have SMP support.

The only floating external interrupts used right now are SERVICE
interrupts, so let's use that name. Following patches will clean up
SERVICE interrupt injection.

This get's rid of the ugly special handling for cpu timer and clock
comparator interrupts. And we really only store the parameters as
defined by the PoP.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Marc-André Lureau
96f64aa878 S390: use g_new() family of functions
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: more changes in hw/s390x/css.c, added target/s390x/cpu_models.c]
Message-Id: <20171006235023.11952-27-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Emilio G. Cota
7f11636dbe tcg: remove addr argument from lookup_tb_ptr
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.

This change paves the way to having a common "tb_lookup" function.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-10 07:37:10 -07:00
Cornelia Huck
8986db4922 s390x/tcg: initialize machine check queue
Just as for external interrupts and I/O interrupts, we need to
initialize mchk_index during cpu reset.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
Collin L. Walling
7edd4a4967 s390/kvm: Support for get/set of extended TOD-Clock for guest
Provides an interface for getting and setting the guest's extended
TOD-Clock via a single ioctl to kvm. If the ioctl fails because it
is not support by kvm, then we fall back to the old style of
retrieving the clock via two ioctls.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change]
Message-Id: <20171004105751.24655-2-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[some cosmetic fixes]
2017-10-06 10:53:02 +02:00
David Hildenbrand
86b5ab3909 s390x/tcg: make STFL store into the lowcore
Using virtual memory access is wrong and will soon include low-address
protection checks, which is to be bypassed for STFL.

STFL is a privileged instruction and using LowCore requires
!CONFIG_USER_ONLY, so add the ifdef and move the declaration to the
right place.

This was originally part of a bigger STFL(E) refactoring.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170927170027.8539-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
f42dc44a14 s390x: introduce and use S390_MAX_CPUS
Will be handy in the future.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
1e70ba24a9 target/s390x: get rid of next_core_id
core_id is not needed by linux-user, as the core_id a.k.a. CPU address
is only accessible from kernel space.

Therefore, drop next_core_id and make cpu_index get autoassigned again
for linux-user.

While at it, shield core_id and cpuid completely from linux-user. cpuid
can also only be queried from kernel space.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
c547a757f4 s390x/cpumodel: fix max STFL(E) bit number
Not that it would matter in the near future, but it is actually 2048
bytes, therefore 16384 possible bits.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
c5b934303c s390x: raise CPU hotplug irq after really hotplugged
Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).

This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine

qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
8eb82de91b s390x/tcg: make idte/ipte use the new _real mmu
We don't wrap addresses in the mmu for the _real case, therefore the
behavior should be unchanged.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-7-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
e26131c904 s390x/tcg: make testblock use the new _real mmu
Low address protection checks will be moved into the mmu later.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
4ae433417e s390x/tcg: make stora(g) use the new _real mmu
As we properly handle the return address now, we can drop
potential_page_fault().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
34499dadc1 s390x/tcg: make lura(g) use the new _real mmu.
Looks like, lurag was not loading 64bit but only 32bit.

As we properly handle the return address now, we can drop
potential_page_fault().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
fb66944df9 s390x/tcg: add MMU for real addresses
This makes it easy to access real addresses (prefix) and in addition
checks for valid memory addresses, which is missing when using e.g.
stl_phys().

We can later reuse it to implement low address protection checks (then
we might even decide to introduce yet another MMU for absolute
addresses, just for handling storage keys and low address protection).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
0bd695a960 s390x/tcg: fix checking for invalid memory check
It should have been a >=, but let's directly perform a proper access
check to also be able to deal with hotplugged memory later.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
David Hildenbrand
947a38bd6f s390x/kvm: fix and cleanup storing CPU status
env->psa is a 64bit value, while we copy 4 bytes into the save area,
resulting always in 0 getting stored.

Let's try to reduce such errors by using a proper structure. While at
it, use correct cpu->be conversion (and get_psw_mask()), as we will be
reusing this code for TCG soon.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170922140338.6068-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
Igor Mammedov
b6805e127c s390x: use generic cpu_model parsing
Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
David Hildenbrand
7705c75048 s390x/tcg: add basic MSA features
The STFLE bits for the MSA (extension) facilities simply indicate that
the respective instructions can be executed. The QUERY subfunction can then
be used to identify which features exactly are available.

Availability of subfunctions can also vary on real hardware. For now, we
simply implement a CPU model without any available subfunctions except
QUERY (which is always around).

As all MSA functions behave quite similarly, we can use one translation
handler for now. Prepare the code for implementation of actual subfunctions.

At least MSA is helpful for now, as older Linux kernels require this
facility when compiled for a z9 model. Allow to enable the facilities
for the qemu cpu model.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
David Hildenbrand
7634d658e6 s390x/tcg: move wrap_address() to internal.h
We want to use it in another file.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
David Hildenbrand
6b257354c4 s390x/tcg: implement spm (SET PROGRAM MASK)
Missing and is used inside Linux in the context of CPACF.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
Peter Maydell
ab16152926 Migration pull 2017-09-27
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZy64HAAoJEAUWMx68W/3nTqwP/A5Gx4Qwkv5KKdpM0YLq//d+
 OODmzl7Ni3a5Up1ETqGdLb84estrgY+5DISp73Rkt4a5tbT7+XKrhb4qD+93NnTe
 zynY9in4C1jGxYm7YzeOhwSeIiuLZMTCLQlGdYw7/nunIFwkItUEvAFx3AG1WCJe
 2Mk0lvmg4LikruDDMdzqZaJu7h5RU5sQjA7SsyrTBdsN7tNWl3rKLYGXwgzv0uz5
 n2xkUgzvvnj1Bk/Adojkn05yxA86xKD/4rhFED9fjNVSjAGHMrHIWOJ70V26Cg5w
 3gJ+5mesWsH+erf0JFYv0S38SyFbmIOE39Nn13D/d0o1x89P8B8cgqbi3ADTKM77
 875wuIVnZzi2vIwVdxXQ9GHQ79cpXwr2fOfQ2rjT6Ll95K+u/MQG86fQiO0eJW+0
 KwQVCwwh+HmCUcCogMuxAc9+F8C8qolwCi/9QXwS2yLBElHKaWDIMyTce36cW9d7
 cZaKIOeSJUGNFoaWZnXN88MRuOYbdywTl+GddVAW3+VJCTYV2oi0o5fsTfxXy5AV
 y7uYo/pcSj2gSZJ5GairMlB6p5iXnE8yusi1e4ZKA1x1TaSHSb6zR59lRUFr+j/L
 JhUCfA85v5/elGqgkYp6UhSzFDJ2ID2oSEMQTIzfVrinOXtnf2KEh33YMbUH5qyo
 yHVEu12uPe9rE6A0vWlu
 =/+LV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging

Migration pull 2017-09-27

# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170927a:
  migration: Route more error paths
  migration: Route errors up through vmstate_save
  migration: wire vmstate_save_state errors up to vmstate_subsection_save
  migration: Check field save returns
  migration: check pre_save return in vmstate_save_state
  migration: pre_save return int
  migration: disable auto-converge during bulk block migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27 22:44:51 +01:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Christian Borntraeger
9dacc90846 s390x/cpumodel: remove ais from z14 default model-> also for 2.10.1
We disabled ais for 2.10, so let's also remove it from the z14
default model.

Fixes: 3f2d07b3b0 ("s390x/ais: for 2.10 stable: disable ais facility")
CC: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170927072030.35737-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-27 11:13:32 +02:00
Christian Borntraeger
3f2d07b3b0 s390x/ais: for 2.10 stable: disable ais facility
The migration interface for ais was introduced with kernel 4.13
but the capability itself had been active since 4.12. As migration
support is considered necessary lets disable ais in the 2.10
stable version. A proper fix and re-enablement will be done
for qemu 2.11.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170921140834.14233-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-22 09:25:21 +02:00
Cornelia Huck
8ad9087c4a s390x/ccw: create s390 phb for compat reasons as well
d32bd032d8 ("s390x/ccw: create s390 phb conditionally") made
registering the s390 pci host bridge conditional on presense
of the zpci facility bit. Sadly, that breaks migration from
machines that did not use the cpu model (2.7 and previous).

Create the s390 phb for pre-cpu model machines as well: We can
tweak s390_has_feat() to always indicate the zpci facility bit
when no cpu model is available (on 2.7 and previous compat machines).

Fixes: d32bd032d8 ("s390x/ccw: create s390 phb conditionally")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
a1422723f7 s390x: allow CPU hotplug in random core-id order
SCLP correctly indicates the core-id aka. CPU address for each available
CPU.

As the core-id corresponds to cpu_index, also a newly created kvm vcpu
gets assigned this core-id as vcpu id. So SIGP in the kernel works
correctly (it uses the vcpu id to lookup the correct CPU).

So there should be nothing hindering us from hotplugging CPUs in random
core-id order.

This now makes sure that the output from "query-hotpluggable-cpus"
is completely true. Until now, a specific order is implicit. Performance
vice, hotplugging CPUs in non-sequential order might not be the best thing
to do, as VCPU lookup inside KVM might be a little slower. But that
doesn't hinder us from supporting it.

next_core_id is now used by linux user only.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-23-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
524d18d8bd s390x: get rid of cpu_s390x_create()
Now that there is only one user of cpu_s390x_create() left, make cpu
creation look like on x86.
- Perform the model/properties split and checks in s390_init_cpus()
- Parse features only once without having to remember if already parsed
- Pass only the typename to s390x_new_cpu()
- Use the typename of an existing CPU for hotplug via cpu-add

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
0347ab8469 s390x: allow cpu hotplug via device_add
E.g. the following now works:
    device_add host-s390-cpu,id=cpu1,core-id=1

The system will perform the same checks as when using cpu_add:
- If the core_id is already in use
- If the next sequential core_id isn't used
- If core-id >= max_cpu is specified

In addition, mixed CPU models are checked. E.g. if starting with
-cpu host and trying to hotplug "qemu-s390-cpu":
    "Mixed CPU models are not supported on s390x."

Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
99aa6bf29b s390x: print CPU definitions in sorted order
Other architectures provide nicely sorted lists, let's do it similarly on
s390x.

While at it, clean up the code we have to touch either way.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
b599fef28e target/s390x: rename next_cpu_id to next_core_id
Adapt to the new term "core_id". While at it, fix the type and drop the
initialization to 0 (which is superfluous).

Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
ca5c1457d6 target/s390x: use "core-id" for cpu number/address/id handling
Some time ago we discussed that using "id" as property name is not the
right thing to do, as it is a reserved property for other devices and
will not work with device_add.

Switch to the term "core-id" instead, and use it as an equivalent to
"CPU address" mentioned in the PoP. There is no such thing as cpu number,
so rename env.cpu_num to env.core_id. We use "core-id" as this is the
common term to use for device_add later on (x86 and ppc).

We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync.
cpu_index was already implicitly used by e.g. cpu_exists(), so keeping
both in sync seems to be the right thing to do.

cpu_index will now no longer automatically get set via
cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed
in sync.

Our new cpu property "core-id" can be a static property. Range checks can
be avoided by using the correct type and the "setting after realized"
check is done implicitly.

device_add will later need the reserved "id" property. Hotplugging a CPU
on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2".

Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
88556edd74 target/s390x: set cpu->id for linux user when realizing
scc->next_cpu_id is updated when realizing. Setting it just before that
point looks cleaner.

Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
David Hildenbrand
e0b1a8a14e target/s390x: use program_interrupt() in per_check_exception()
Clean it up by reusing program_interrupt(). Add a concern regarding
ilen.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
525f4b65c7 target/s390x: use trigger_pgm_exception() in s390_cpu_handle_mmu_fault()
This looks cleaner. linux-user will not use the ilen field, so setting
it doesn't do any harm.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
53d8e91d64 s390x: move sclp_service_call() to sclp.h
Implemented in sclp.c, so let's move it to the right include file.
Also adjust some includes.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
ef2974cc27 target/s390x: move some s390x typedefs to cpu-qom.h
This allows us to drop inclusion of cpu_models.h in cpu-qom.h, and
prepares for using cpu-qom.h as a s390 specific version of typedefs.h

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-8-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
19c69829d6 s390x: move subsystem_reset() to s390-virtio-ccw.h
Implemented in s390-virtio-ccw.c, so move it to the right header.
We can also drop the extern. Fix up one include.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
2c98a6c1ca s390x: move s390_virtio_hypercall() to s390-virtio-hcall.h
Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the
right header file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
7f579e272f exec,dump,i386,ppc,s390x: don't include exec/cpu-all.h explicitly
All but a handful of files include exec/cpu-all.h via cpu.h only.
As these files already include cpu.h, let's just drop the additional
include.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:21:33 +02:00
Yi Min Zhao
01c36195d6 s390x/pci: fixup ind_offset of msix routing entry
The guest uses the mpcifc instruction to register the aibvo of a zpci
device, which is the starting offset of indicators in the indicator
area and thus remains constant. Each msix vector is an offset from the
aibvo. When we map a msix route to an adapter route, we should not
modify the starting offset, but instead add the vector to the starting
offset to get the absolute offset in the specific route.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-3-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:21:33 +02:00
Yi Min Zhao
ceb7054fd4 s390x/pci: remove idx from msix msg data
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:21:32 +02:00
Alistair Francis
55d527a94d Convert remaining error_report() to warn_report()
In a previous patch (3dc6f86936) we
converted uses of error_report("warning:"... to use warn_report()
instead. This was to help standardise on a single method of printing
warnings to the user.

There appears to have been some cases that slipped through in patch sets
applied around the same time, this patch catches the few remaining
cases.

All of the warnings were changed using this command:
  find ./* -type f -exec sed -i \
    's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

Two messages were manually fixed up as well.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <eec8cba0d5434bd828639e5e45f12182490ff47d.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
Lluís Vilanova
77fc6f5e28 target: [tcg] Use a generic enum for DISAS_ values
Used later. An enum makes expected values explicit and
bounds the value space of switches.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Igor Mammedov
6ad76dfd13 s390x: replace cpu_s390x_init() with cpu_generic_init()
cpu_s390x_init() is used only *-user targets indirectly
via cpu_init() macro and has a hack to assign ids to created
cpus (I'm not sure if 'id' really matters to *-user emulation).

So to on safe side, instead of having custom wrapper to do numbering
replace it with cpu_generic_init() and use S390CPUClass::next_cpu_id
which could serve the same purpose as static variable and move cpu->id
initialization to s390_cpu_initfn for CONFIG_USER_ONLY use-case.

PS:
ifdef is ugly but it allows us to hide s390x detail that isn't
set by *-user targets and reuse generic cpu creation utility
for btoh machine and user emulation.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1504185578-80843-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-01 11:54:24 -03:00
David Hildenbrand
c862bddbcb target/s390x: cleanup cpu.h
Let's reshuffle the function prototypes so we get a cleaner outline
of the files.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:26 +02:00
David Hildenbrand
f16bbb9bbd s390x/kvm: move KVM declarations and stubs to separate files
Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.

Change license to GPL2+ and keep copyright notice.

As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.

Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:26 +02:00
David Hildenbrand
5e7164c50c s390x: avoid calling kvm_ functions outside of target/s390x/
Let's just introduce an helper.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
b6089b059c target/s390x: move a couple of functions to cpu.c
Prepare to move more stuff (especially KVM related) from cpu.h to
internal.h.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
4e58b838dd target/s390x: introduce internal.h
cpu.h should only contain what really has to be accessed outside of
target/s390x/. Add internal.h which can only be used inside target/s390x/.

Move everything that isn't fast enough to run away and restructure it
right away. We'll move all kvm_* stuff later.

Minor style fixes to avoid checkpatch warning to:
- struct Lowcore: "{" goes into same line as typedef
- struct LowCore: add spaces around "-" in array length calculations
- time2tod() and tod2time(): move "{" to separate line
- get_per_atmid(): add space between ")" and "?". Move cases by one char.
- get_per_atmid(): drop extra paremthesis around (1 << 6)

Change license of new file to GPL2+ and keep copyright notice.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
d9b8daf996 target/s390x: move get_per_in_range() to misc_helper.c
Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
52c9154541 target/s390x: move s390_do_cpu_reset() to diag.c
Only used in that file. Also drop the comment, not really needed.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
c07a100966 target/s390x: move psw_key_valid() to mem_helper.c
Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
12e1e8f1aa target/s390x: move cpu_mmu_idx_to_asc() to excp_helper.c
Only used in that file.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
c534055031 target/s390x: move cc_name() to helper.c
While at it, move the translations into the function and properly pass
enum cc_op as parameter. We can't move it to cc_helper.c as this would
break --disable-tcg.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
1083a3f45c target/s390x: move gtod_*() declarations to s390-virtio.h
The functions are not used in target/s390x/ so a header in hw/s390x/
is a better place.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
e654ca84b6 s390x: drop inclusion of sysemu/kvm.h from some files
s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
7d00bf94df s390x/cpumodel: factor out determination of default model name
Now we can drop inclusion of "sysemu/kvm.h" from "s390-virtio.c".

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-7-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
708f99c366 s390x/kvm: drop KVMState parameter from kvm_s390_set_mem_limit()
Not needed at that point. Also drop it from kvm_s390_query_mem_limit()
we call in kvm_s390_set_mem_limit().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
David Hildenbrand
fba5f6feba s390x/kvm: drop KVMState parameter from s390_get_memslot_count()
Not needed at that point.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
42f865da96 s390x/pci: fence off instructions for non-pci
If a guest running on a machine without zpci issues a pci instruction,
throw them an exception.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
21eb052cf2 s390x/pci: do not advertise pci on non-pci builds
Only set the zpci feature bit on builds that actually support pci.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
1c5deaec77 s390x: chsc nt2 events are pci-only
The nt2 event class is pci-only - don't look for events if pci is
not in the active cpu model.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
eb569af835 s390x: wire up diag288 in tcg
Make the diag288 watchdog useable via tcg as well.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
a8aec856b8 s390x/tcg: specification exception for unknown diag
While the PoP is silent on the issue, z/VM documentation states
that unknown diagnose codes trigger a specification exception.
We already do that when running with kvm, so change tcg to do so
as well.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Richard Henderson
de4e05d1e5 target/s390x: Fix CSST for 16-byte store
Found by Coverity (CID 1378273).

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-08-03 10:58:50 -07:00
Vladimir Sementsov-Ogievskiy
8908eb1a4a trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
 #!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
    for line in fileinput.input(fname, inplace=True):
        arr = re.split(rgroup, line)
        for i in range(0, len(arr), 2):
            arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

        sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Philippe Mathieu-Daudé
87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
David Hildenbrand
98987d30b6 target/s390x: fix pgm irq ilen in translate_pages()
0 is certainly wrong. Let's use ILEN_AUTO.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170721125609.11117-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-28 10:06:25 +02:00
David Hildenbrand
031631c3cf target/s390x: fix pgm irq ilen for stsi
The instruction is 4 bytes long.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170721125609.11117-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-28 10:06:25 +02:00
Halil Pasic
7e01376dae s390x/css: fix ilen in IO instruction handlers
When initiating a program check interruption by calling program_interrupt
the instruction length (ilen) of the current instruction is supplied as
the third parameter.

On s390x all the IO instructions are of instruction format S and their
ilen is 4.  The calls to program_interrupt (introduced by commits
7b18aad543 ("s390: Add channel I/O instructions.", 2013-01-24) and
61bf0dcb2e ("s390x/ioinst: Add missing alignment checks for IO
instructions", 2013-06-21)) however use ilen == 2.

This is probably due to a confusion between ilen which specifies the
instruction length in bytes and ILC which does the same but in halfwords.
If kvm_enabled() this does not actually matter, because the ilen
parameter of program_interrupt is effectively unused.

Let's provide the correct ilen to program_interrupt.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes:  7b18aad543 ("s390: Add channel I/O instructions.")
Fixes: 61bf0dcb2e ("s390x/ioinst: Add missing alignment checks for IO instructions")
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170724143452.55534-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Thomas Huth
b114588c06 target/s390x: Add remaining switches to compile with --disable-tcg
Adding some CONFIG_TCG tests to be finally able to compile QEMU
on s390x also without TCG.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-6-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Thomas Huth
cded4014ae target/s390x: Move exception-related functions to a new excp_helper.c file
These functions can not be compiled with --disable-tcg. But since we
need the other functions from helper.c in the non-tcg build, we can also
not simply remove helper.c from the non-tcg builds. Thus the problematic
functions have to be moved into a separate new file instead that we
can later omit in the non-tcg builds.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-5-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Thomas Huth
e3cfd926f7 target/s390x: Rework program_interrupt() and related functions
misc_helper.c won't be compiled with --disable-tcg anymore, but we
still need the program_interrupt() function in that case. Move it
to interrupt.c instead, and refactor it to re-use the code from
trigger_pgm_exception() (for TCG) and enter_pgmcheck() (for KVM,
which now got renamed to kvm_s390_program_interrupt() for
clarity).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-4-git-send-email-thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Thomas Huth
3d6722051b target/s390x: Move diag helpers to a separate file
misc_helper.c won't be compiled with --disable-tcg anymore, but we
still need the diag helpers in KVM builds, too, so move the helper
functions to a separate file.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Thomas Huth
b5bd2e91a6 target/s390x: Move s390_cpu_dump_state() to helper.c
translate.c can not be compiled with --disable-tcg, but we need
the s390_cpu_dump_state() in KVM-only builds, too. So let's move
that function to helper.c instead, which will also be compiled
when --disable-tcg has been specified.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1500886370-14572-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
David Hildenbrand
30e82de704 target/s390x: improve baselining if certain base features are missing
There are certain features that we put into base models, but that are
not relevant for the actual search. The most famous example are
MSA subfunctions that might be disabled on certain real hardware out
there.

While the kvm host model detection will usually detect the correct model
on such machines (as it will in the common case not pass features to check
for into s390_find_cpu_def()), baselining will fall back to a quite old
model just because some MSA subfunctions are missing.

Let's improve that by ignoring lack of these features while performing
the search for a base model.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
David Hildenbrand
e23bc1b202 s390x/kvm: better comment regarding zPCI feature availability
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
David Hildenbrand
3d1cfc3c68 target/s390x: introduce (test|set)_be_bit
Using ordinary bitmap operations to set/test bits does not work properly
on architectures !s390x. Let's drop (test|set)_bit_inv and introduce
(test|set)_be_bit instead. These functions work on uint8_t array, not on
unsigned longs arrays and are for now only used in the context of
CPU features.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
David Hildenbrand
cc18f90762 target/s390x: indicate query subfunction in s390_fill_feat_block
We'll have to do the same for TCG, so let's just move it in there.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
David Hildenbrand
f026fcd192 target/s390x: drop BE_BIT()
Unused and broken, let's just get rid of it.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170720123721.12366-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Christian Borntraeger
c1b364ffd7 s390/cpumodel: remove KSS from the default model of z14
The SIE_KSS feature will allow a guest to use KSS for a nested guest.
To create a nested guest the SIE_F2 facility is still necessary.
Since SIE_F2 is not part of the default model it does not make
a lot of sense to provide the SIE_KSS feature in the default model.
Let's also create a dependency check.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1500550051-7821-2-git-send-email-borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-25 09:17:42 +02:00
Lluís Vilanova
9c489ea6be tcg: Pass generic CPUState to gen_intermediate_code()
Needed to implement a target-agnostic gen_intermediate_code()
in the future.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:16 -07:00
Peter Maydell
6887dc6700 s390: add z14 cpu model
- add a CPU model for the IBM z14 which was announced on July 17th 2017
 - update linux headers to 4.13-rc0 to get a fix for an ioctl definition
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZbc04AAoJEBF7vIC1phx8xxkP/Rf/Y7jCvFzDXvE2+tJwkETi
 9l6un+gyoW64l4vI7RDT7wTl/A7uBNxZxJMXprFKaE2Kcg3D8IWdFq/RudmuJCJ5
 SzY4X/L1kWHdKxVzeEF6RVqKfeNnA2Hk4KggzDMqpXxztjenvJiJYHqL0n3+edLS
 LHfi4z5PMzXHMF9plE7Usw0GMp+8HzVe3Bk/d+gqBMG9TDTPJXdGP/E9FEDij4dE
 GcNNmilzowkz9JZh5Gw92oq7iLXoCMbf9QUiu5IF1Gqd/kw9tFYzWtq26nR8GJyf
 sr7DeNbUiOi6xJA/CWTwwlwS3FZXXNjbQPumRfP1kRllyHKyRIAHxhKVJajTDgQg
 FVZ46GAWuUnK38COhkuNN67zoH8YzRgHwn/Ls6RxTtGlJe1xlg2GgNJSxavWh6FE
 Hwr1twe13A/QyFN7dVyy52F/WYIPxggwUqEE7Xh5YL3eDIaPuC/2bKS5pTZmGrJZ
 47S+FwBGPvkt2+DmpynCShN1APpLLH+Ap448twYkEbOqoYMD8zoqZj2LPtZA13Rp
 htb56v0bRgTFrLQcIpUn+QeIsIgAde/FQl6PvbQujVJlwUG8mYCiin/4brVXRRFr
 JCEKjSf7qEDEnK2SAefdIlrpeQT9kBuHpWW8/pLhEuJMQpTk2qwUwOlN4AKaJb0T
 acsUZwXSl4hGR3L7k/VL
 =jOvs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170718' into staging

s390: add z14 cpu model

- add a CPU model for the IBM z14 which was announced on July 17th 2017
- update linux headers to 4.13-rc0 to get a fix for an ioctl definition

# gpg: Signature made Tue 18 Jul 2017 09:56:24 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20170718:
  s390x/cpumodel: z14 cpu models
  linux header sync against v4.13-rc1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-18 21:13:48 +01:00
Jason J. Herne
cc28a5949b s390x/cpumodel: z14 cpu models
This patch introduces the CPU model for z14, along with all base and
optional features.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-18 10:55:16 +02:00
Richard Henderson
dbdaaff43a target/s390x: Fix risbg handling
The rotation is to the left, but extract shifts to the right.
The computation of the extract parameters needs adjusting.

For the entry condition, simplify

	64 - rot + len <= 64
	-rot + len <= 0
	len <= rot

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
David Hildenbrand
19d70587b5 target/s390x: Allow to enable "idtes" feature for TCG
STFL bit 4 and 5 are just indications to the guest, which TLB entries an
IDTE call will clear. These are performance indicators for the guest.

STFL bit 4:
    INVALIDATE DAT TABLE ENTRY (IDTE) performs
    the invalidation-and-clearing operation by
    selectively clearing TLB segment-table entries
    when a segment-table entry or entries are
    invalidated. IDTE also performs the clearing-by-
    ASCE operation. Unless bit 4 is one, IDTE simply
    purges all TLBs. Bit 3 is one if bit 4 is one.

We can simply set STFL bit 4 ("idtes") and still purge the complete TLB.
Purging more than advertised is never bad. E.g. Linux doesn't even care
about this bit. We can optimized this later.
This is helpful, as the z9 base model contains this facility.

STFL bit 5 (clearing TLB region-table-entries) was never implemented on
real HW, therefore we can simply ignore it for now.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170627161032.5014-1-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
Richard Henderson
e89ea6aa9d target/s390x: Mark ETF3 and ETF3_ENH facilities as available
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
Richard Henderson
b213c9f58e target/s390x: Implement TRTR
Drop TRT from the set of insns handled internally by EXECUTE.
It's more important to adjust the existing helper to handle
both TRT and TRTR.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
Richard Henderson
be7acb5839 target/s390x: Implement SRSTU
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
Richard Henderson
7591db780d target/s390x: Tidy SRST
Since we require all registers saved on input, read R0 from ENV instead
of passing it manually.  Recognize the specification exception when R0
contains incorrect data.  Keep high bits of result registers unmodified
when in 31 or 24-bit mode.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:17 -07:00
Richard Henderson
941ef3db03 target/s390x: Implement CONVERT UNICODE insns
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:16 -07:00
Richard Henderson
c67ba30307 target/s390x: Implement CSST
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-17 14:13:16 -07:00
Peter Maydell
fbc8ea1ed0 s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
 - migration of storage attributes like the CMMA used/unused state
 - PCI related enhancements - full support for aen, ais and zpci
 - migration support for css with vmstates (Halil Pasic)
 - cpu model enhancements for cpu features
 - guarded storage support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZaJ3gAAoJEBF7vIC1phx8VSAP/1zKh7ti4Y2dIVb94c1tvECE
 LRNdCdAPhEqL6zybty85aG04sjAmSu50NGfo5t8AGq1U9WBWrCy7/wWSFdK2GI63
 Umc1fR7aBF9FiFayKONhExaREh6gSWVHZF1RyaPIWnnjRIeX8nqgPEnpdZNiVVrG
 5cKHV2SUd5pMDJUiQdZGZgbgG1c+MWJx2BHoduM+K0UnmFjpyLCL4Rq58Q2Q87Nj
 /+yPSVApFFeMsDpem6DNttE6Msa+V+K+EmRhRKqZNOWrdRKH5vvj6Fl/LSxVtd9c
 CEG+aZGjFd693uP9ge0WmjeUJtVHIGt9xKdeU0d7FijZWehjsIqalLoqapzK8ddF
 h6HJuNsmk/SZF7O9JsbHT3Epyr+7Hk0dx78Ku1GNQuUxtFL93eyIJmRdgz7Zo3Lj
 ZTPJvCA13GjPWtgzG5dG3JH1hiAS+Yai18BgdzGbs+qfMCwPdbWkoqg7sARwAJNe
 50fo/ayJvcmHJnSNO6hErFoU38WctGgO8fWp+oVvD8Um1ny1aBFFuJgJIMf47nhu
 x1IdA6UGrNN0yNC4/UgyYBDV1hfvo/phMdoHqle9AcMmPYOD1DBr0genK/bYbICk
 Dio7og9nKgheLRBHz2u5TuYcCsfE/7rtwZX+iXMvoC7VE7Dqs+Q7Zjwwwtwj4x9F
 FwWuf/Bv1s6IkVLlP8Ow
 =2bOV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging

s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups

- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support

# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20170714: (40 commits)
  s390x/gdb: add gs registers
  s390x/arch_dump: also dump guarded storage control block
  s390x/kvm: enable guarded storage
  s390x/kvm: Enable KSS facility for nested virtualization
  s390x/cpumodel: add esop/esop2 to z12 model
  s390x/cpumodel: we are always in zarchitecture mode
  s390x/cpumodel: wire up new hardware features
  s390x/flic: migrate ais states
  s390x/cpumodel: add zpci, aen and ais facilities
  s390x: initialize cpu firstly
  pc-bios/s390: rebuild s390-ccw.img
  pc-bios/s390: add s390-netboot.img
  pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
  pc-bios/s390-ccw: Add virtio-net driver code
  pc-bios/s390-ccw: Add core files for the network bootloading program
  roms/SLOF: Update submodule to latest status
  pc-bios/s390-ccw: Add code for virtio feature negotiation
  pc-bios/s390-ccw: Remove unused structs from virtio.h
  pc-bios/s390-ccw: Move byteswap functions to a separate header
  pc-bios/s390-ccw: Add a write() function for stdio
  ...

Conflicts:
	target/s390x/kvm.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 14:19:35 +01:00
Christian Borntraeger
86158a2a2b s390x/gdb: add gs registers
Let's provide the guarded storage registers via gdb server.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Christian Borntraeger
21a106904b s390x/arch_dump: also dump guarded storage control block
Write the new note section of type 30b (guarded storage control block).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Fan Zhang
62deb62d99 s390x/kvm: enable guarded storage
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.

The feature is fenced for older machine type versions.

Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Farhan Ali
c0a9cd940e s390x/kvm: Enable KSS facility for nested virtualization
If the host supports keyless subset (KSS) then first level
guest (G2) should enable KSS facility as well.

Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Jason J. Herne
7223bccea3 s390x/cpumodel: add esop/esop2 to z12 model
Add esop and esop2 features to z12 model where esop2 was originally
introduced. Disable esop and esop2 when using compatibility machine
v2.9 or earlier.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Jason J. Herne
075e52b816 s390x/cpumodel: we are always in zarchitecture mode
In QEMU, a guest VCPU always started in and never was able to leave
z/Architecture mode. Now we have an architected way of showing this
condition.

The SIGP SET ARCHITECTURE instruction is simply rejected. Linux as guest
seems to not care about the return value, which is a good thing
The new handling is just like already being in z/Architecture mode.

We'll not try to fake absence of this facility, but still not indicate
the facility in case some strange CPU model turned z/Architecture off
completely (which doesn't work either way but let's us see how a
guest would react on a lack of this facility).

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Jason J. Herne
6da5c593bb s390x/cpumodel: wire up new hardware features
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
2017-07-14 12:29:49 +02:00
Yi Min Zhao
3b00f702c2 s390x/cpumodel: add zpci, aen and ais facilities
zPCI instructions and facilities are available since IBM zEnterprise
EC12. To support z/PCI in QEMU we enable zpci, aen and ais facilities
starting with zEC12 GA1. And we always set zpci and aen bits in max cpu
model. Later they might be switched off due to applied real cpu model.
For ais bit, we only provide it in the full cpu model beginning with
zEC12 and defer its enablement in the default cpu model to a later point
in time. At the same time, disable them for 2.9 and older machines.

Because of introducing AIS facility, we could check if it's enabled to
initialize flic->ais_supported with the real value.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-07-14 12:29:49 +02:00
Fei Li
2283f4d67a s390x/sic: realize SIC handling
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.

Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Jason J. Herne
c9ad8a7a53 s390x/cpumodel: provide compat handling for new cpu features
Provide a mechanism to disable features in compatibility machines.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Jason J. Herne
ec3aadb13e s390x/cpumodel: clean up spacing and comments
Clean up spacing and add comments to clarify difference between base, full and
default models.

Not having spacing around the model definitions in gen-features.c is
particularly frustrating as the reader tends to misinterpret which model they
are looking at or editing.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Janosch Frank
03f47ee49e s390x/kvm: Rework cmma management
Let's keep track of cmma enablement and move the mem_path check into
the actual enablement. This now also warns users that do not use
cpu-models about disabled cmma when using huge pages.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 09:11:12 +02:00
Alistair Francis
3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
QingFeng Hao
cda3c19ff5 virtio-scsi-ccw: use ioeventfd even when KVM is disabled
This patch is based on a similar patch from Stefan Hajnoczi -
commit c324fd0a39 ("virtio-pci: use ioeventfd even when KVM is disabled")

Do not check kvm_eventfds_enabled() when KVM is disabled since it
always returns 0.  Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.

This patch makes -device virtio-scsi-ccw,iothread=iothread0 work even
when KVM is disabled.
Currently we don't have an equivalent to "memory: emulate ioeventfd"
for ccw yet, but that this doesn't hurt and qemu-iotests 068 can pass with
skipping iothread arguments.

I have tested that virtio-scsi-ccw works under tcg both with and without
iothread.

This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170704132350.11874-2-haoqf@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-05 19:45:02 +02:00
Viktor Mihajlovski
38cba1f4d8 s390x: return unavailable features via query-cpu-definitions
The response for query-cpu-definitions didn't include the
unavailable-features field, which is used by libvirt to figure
out whether a certain cpu model is usable on the host.

The unavailable features are now computed by obtaining the host CPU
model and comparing it against the known CPU models. The comparison
takes into account the generation, the GA level and the feature
bitmaps. In the case of a CPU generation/GA level mismatch
a feature called "type" is reported to be missing.

As a result, the output of virsh domcapabilities would change
from something like
 ...
     <mode name='custom' supported='yes'>
      <model usable='unknown'>z10EC-base</model>
      <model usable='unknown'>z9EC-base</model>
      <model usable='unknown'>z196.2-base</model>
      <model usable='unknown'>z900-base</model>
      <model usable='unknown'>z990</model>
 ...
to
 ...
     <mode name='custom' supported='yes'>
      <model usable='yes'>z10EC-base</model>
      <model usable='yes'>z9EC-base</model>
      <model usable='no'>z196.2-base</model>
      <model usable='yes'>z900-base</model>
      <model usable='yes'>z990</model>
 ...

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1499082529-16970-1-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-05 19:44:24 +02:00
David Hildenbrand
be7f28de5d target/s390x: Implement idte instruction
Let's keep it very simple for now and flush the complete tlb,
we currently can't find the right entries in our tlb, we would have
to store the used tables for each element.

As we now fully implement the DAT-enhancement facility, we can allow to
enable it for the qemu CPU model.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-4-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-23 09:17:45 -07:00
David Hildenbrand
97b95aae3b target/s390x: Improve heuristic for ipte
If only the page index is set, most likely we don't have a valid
virtual address. Let's do a full tlb flush for that case.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-23 09:17:45 -07:00
David Hildenbrand
faf1c63d34 target/s390x: Indicate and check for local tlb clearing
Let's allow to enable it for the qemu cpu model and correctly emulate
it.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170622094151.28633-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-23 09:17:45 -07:00