In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
Back in 2016, we discussed[1] rules for headers, and these were
generally liked:
1. Have a carefully curated header that's included everywhere first. We
got that already thanks to Peter: osdep.h.
2. Headers should normally include everything they need beyond osdep.h.
If exceptions are needed for some reason, they must be documented in
the header. If all that's needed from a header is typedefs, put
those into qemu/typedefs.h instead of including the header.
3. Cyclic inclusion is forbidden.
This patch gets include/ closer to obeying 2.
It's actually extracted from my "[RFC] Baby steps towards saner
headers" series[2], which demonstrates a possible path towards
checking 2 automatically. It passes the RFC test there.
[1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org>
https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html
[2] Message-Id: <20190711122827.18970-1-armbru@redhat.com>
https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-2-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move the HMP handlers related to qapi/machine.json to
hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS
section "Machine core", just like qapi/machine.json.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the HMP command handlers related to QOM handlers from
monitor/hmp-cmds.c and qdev-monitor.c to new qom/qom-hmp-cmds.c, where
they are covered by MAINTAINERS section QOM.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Also move hmp_info_qom_tree(), tweak commit message accordingly]
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.
What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The ReadLineState in Monitor is only used for HMP monitors. Create
MonitorHMP and move it there.
Can't use container_of() in hmp_change(). Cast instead, and mark
FIXME. Will be cleaned up shortly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated, whitespace
tweaked in hmp_change(), commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find()
return mon_fdset->id which is int64_t. Downcasting from int64_t to int
leads to a bug with removing fd from fdset with id >= 2^32.
So, fix return types for these function.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523094433.30297-1-yury-kotov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
INIT_DISASSEMBLE_INFO() takes an fprintf()-like callback and a FILE *
to pass to it. monitor_disas() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Pass qemu_fprintf() and NULL instead.
monitor_fprintf() is now unused; delete it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-16-armbru@redhat.com>
[Commit message typo corrected]
Commit a95db58f21 added monitor_vfprintf() as an error_printf()
generalized from stderr to arbitrary streams, then used it wrapped in
helper out_printf() to print -device/device_add help to stdout. Use
qemu_printf() instead, and delete monitor_vfprintf() and out_printf().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-16-armbru@redhat.com>
printf() & friends return the number of characters written on success,
negative value on error.
monitor_printf(), monitor_vfprintf(), monitor_vprintf(),
error_printf(), error_printf_unless_qmp(), error_vprintf(), and
error_vprintf_unless_qmp() return void. Some of them carry a TODO
comment asking for int instead.
Improve them to return int like printf() does.
This makes our use of monitor_printf() as fprintf_function slightly
less dirty: the function cast no longer adds a return value that isn't
there. It still changes a parameter's pointer type. That will be
addressed in a future commit.
monitor_vfprintf() always returns zero. Improve it to return the
proper value.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-11-armbru@redhat.com>
Out-of-band command execution was introduced in commit cf869d5317.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit 951702f39c "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a1),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qdev_device_help() is used from command line "-device help", or from
HMP "device_add". If used from command line, print help to stdout
(it is only printed on explicit demand).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d5317 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
Add new parameter to optionally enable Out-Of-Band for a QMP server.
An example command line:
./qemu-system-x86_64 -chardev stdio,id=char0 \
-mon chardev=char0,mode=control,x-oob=on
By default, Out-Of-Band is off.
It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.
Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving
qemu. However, the monitor has still references to them, which may
lead to crashes when running atexit() and trying to send monitor
events:
#0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54
#1 0x00007fffdb1912fa in __GI_abort () at abort.c:89
#2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39
#3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66
#4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280
#5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311
#6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353
#7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401
#8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472
#9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497
#10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038
#11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248
#12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120
#13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324
#14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175
#15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194
#16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354
#17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323
#18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229
#19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589
#20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602
#21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387
#22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152
#23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754
#24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82
#25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104
#26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323
Add a monitor_cleanup() functions to remove all the monitors before
cleaning up the chardev. Note that we are "losing" some events that
used to be sent during atexit().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.
Some manual whitespace trimming around dropped includes squashed in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP monitor code has two helper methods object_add
and qmp_object_del that are called from several places
in the code (QMP, HMP and main emulator startup).
The HMP and main emulator startup code also share
further logic that extracts the qom-type & id
values from a qdict.
We soon need to use this logic from qemu-img, qemu-io
and qemu-nbd too, but don't want those to depend on
the monitor, nor do we want to duplicate the code.
To avoid this, move some code out of qmp.c and hmp.c
adding new methods to qom/object_interfaces.c
- user_creatable_add - takes a QDict holding a full
object definition & instantiates it
- user_creatable_add_type - takes an ID, type name,
and QDict holding object properties & instantiates
it
- user_creatable_add_opts - takes a QemuOpts holding
a full object definition & instantiates it
- user_creatable_add_opts_foreach - variant on
user_creatable_add_opts which can be directly used
in conjunction with qemu_opts_foreach.
- user_creatable_del - takes an ID and deletes the
corresponding object
The existing code is updated to use these new methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.
This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.
The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.
This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.
This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.
While we are here, this adds "cr" as a synonym of "ccr".
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Also polish an error message while I'm touching the line anyway,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.
This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The asynchronous monitor command interface goes back to commit 940cc30
(Jan 2010). Added a third case to command execution. The hope back
then according to the commit message was that all commands get
converted to the asynchronous interface, killing off the other two
cases. Didn't happen.
The initial asynchronous commands balloon and info balloon were
converted back to synchronous long ago (commit 96637bc and d72f32),
with commit messages calling the asynchronous interface "not fully
working" and "deprecated". The only other user went away in commit
3b5704b.
New code generally uses synchronous commands and asynchronous events.
What exactly is still "not fully working" with asynchronous commands?
Well, here's a bug that defeats actual asynchronous use pretty
reliably: the reply's ID is wrong (and has always been wrong) unless
you use the command synchronously! To reproduce, we need an
asynchronous command, so we have to go back before commit 3b5704b.
Run QEMU with spice:
$ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
Connect a spice client in another terminal:
$ remote-viewer spice://localhost:5900
Set up a migration destination dummy in a third terminal:
$ socat TCP-LISTEN:12345 STDIO
Now paste the following into the QMP monitor:
{ "execute": "qmp_capabilities", "id": "i0" }
{ "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } }
{ "execute": "query-kvm", "id": "i2" }
Produces two replies immediately, one to qmp_capabilities, and one to
query-kvm:
{"return": {}, "id": "i0"}
{"return": {"enabled": false, "present": true}, "id": "i2"}
Both are correct. Two lines of debug output from libspice-server not
shown.
Now EOF socat's standard input to make it close the connection. This
makes the asynchronous client_migrate_info complete. It replies:
{"return": {}}
Bug: "id": "i1" is missing. Two lines of debug output from
libspice-server not shown. Cherry on top: storage for the missing ID
is leaked.
Get rid of this stuff before somebody hurts himself with it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The functions ringbuf_read_completion() and monitor_get_rs()
are not used anywhere anymore, so let's remove them.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.
By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
