Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'
together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.
It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
Replace the int8 softfloat-specific typedef with int8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint8\b/int8_t/g'
together with manual removal of the typedef definition, and
manual undoing of various mis-hits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-6-git-send-email-peter.maydell@linaro.org
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
Replace the int32 softfloat-specific typedef with int32_t.
This change was made with
find hw include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint32\b/int32_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
The uses in hw/ipmi/ should not have been using this type at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-4-git-send-email-peter.maydell@linaro.org
Replace the uint64 softfloat-specific typedef with uint64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint64\b/uint64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Note that the target-mips/kvm.c and target-s390x/kvm.c changes are fixing
code that should not have been using the uint64 type in the first place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-3-git-send-email-peter.maydell@linaro.org
Replace the int64 softfloat-specific typedef with int64_t.
This change was made with
find include fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint64\b/int64_t/g'
together with manual removal of the typedef definition, and
manual undoing of some mis-hits where macro arguments were
being used for token pasting rather than as a type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1452603315-27030-2-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hDEn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2016-01-21
# gpg: Signature made Thu 21 Jan 2016 15:08:40 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Add PKU and and OSPKE support
target-i386: Add support to migrate vcpu's TSC rate
target-i386: Reorganize TSC rate setting code
target-i386: Fallback vcpu's TSC rate to value returned by KVM
target-i386: Add suffixes to MMReg struct fields
target-i386: Define MMREG_UNION macro
target-i386: Define MMXReg._d field
target-i386: Rename XMM_[BWLSDQ] helpers to ZMM_*
target-i386: Rename struct XMMReg to ZMMReg
target-i386: Use a _q array on MMXReg too
target-i386/ops_sse.h: Use MMX_Q macro
target-i386: Rename optimize_flags_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch enables migrating vcpu's TSC rate. If KVM on the
destination machine supports TSC scaling, guest programs will
observe a consistent TSC rate across the migration.
If TSC scaling is not supported on the destination machine, the
migration will not be aborted and QEMU on the destination will
not set vcpu's TSC rate to the migrated value.
If vcpu's TSC rate specified by CPU option 'tsc-freq' on the
destination machine is inconsistent with the migrated TSC rate,
the migration will be aborted.
For backwards compatibility, the migration of vcpu's TSC rate is
disabled on pc-*-2.5 and older machine types.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Rewrote comment at kvm_arch_put_registers()]
[ehabkost: Moved compat code to pc-2.5]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a secure memory region to the virt board, which is the
same as the nonsecure memory region except that it also has
a secure-only UART in it. This is only created if the
board is started with the '-machine secure=on' property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a MemoryRegion property, which if set is used to construct
the CPU's initial (default) AddressSpace.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM: code is moved from qom/cpu.c to exec.c to avoid having to
make qom/cpu.o be a non-common object file; code to use the
MemoryRegion and to default it to system_memory added.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This will either create a new AS or return a pointer to an
already existing equivalent one, if we have already created
an AS for the specified root memory region.
The motivation is to reuse address spaces as much as possible.
It's going to be quite common that bus masters out in device land
have pointers to the same memory region for their mastering yet
each will need to create its own address space. Let the memory
API implement sharing for them.
Aside from the perf optimisations, this should reduce the amount
of redundant output on info mtree as well.
Thee returned value will be malloced, but the malloc will be
automatically freed when the AS runs out of refs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM: dropped check for NULL root as unused; added doc-comment;
squashed Peter C's reference-counting patch into this one;
don't compare name string when deciding if we can share ASes;
read as->malloced before the unref of as->root to avoid possible
read-after-free if as->root was the owner of as]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a function to return the AddressSpace for a CPU based on
its numerical index. (Callers outside exec.c don't have access
to the CPUAddressSpace struct so can't just fish it out of the
CPUState struct directly.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Pass the MemTxAttrs for the memory access to iotlb_to_region(); this
allows it to determine the correct AddressSpace to use for the lookup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
When looking up the MemoryRegionSection for the new TLB entry in
tlb_set_page_with_attrs(), use cpu_asidx_from_attrs() to determine
the correct address space index for the lookup, and pass it into
address_space_translate_for_iotlb().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a new method to CPUClass which the memory system core can
use to obtain the correct address space index to use for a memory
access with a given set of transaction attributes, together
with the wrapper function cpu_asidx_from_attrs() which implements
the default behaviour ("always use asidx 0") for CPU classes
which don't provide the method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a new optional method get_phys_page_attrs_debug() to CPUClass.
This is like the existing get_phys_page_debug(), but also returns
the memory transaction attributes to use for the access.
This will be necessary for CPUs which have multiple address
spaces and use the attributes to select the correct address
space.
We provide a wrapper function cpu_get_phys_page_attrs_debug()
which falls back to the existing get_phys_page_debug(), so we
don't need to change every target CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add documentation comments for tlb_set_page_with_attrs()
and tlb_set_page().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Allow multiple calls to cpu_address_space_init(); each
call adds an entry to the cpu->ases array at the specified
index. It is up to the target-specific CPU code to actually use
these extra address spaces.
Since this multiple AddressSpace support won't work with
KVM, add an assertion to avoid confusing failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Rather than setting cpu->as unconditionally in cpu_exec_init
(and then having target-i386 override this later), don't set
it until the first call to cpu_address_space_init.
This requires us to initialise the address space for
both TCG and KVM (KVM doesn't need the AS listener but
it does require cpu->as to be set).
For target CPUs which don't set up any address spaces (currently
everything except i386), add the default address_space_memory
in qemu_init_vcpu().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Connect the Xilinx SPI devices to the ZynqMP model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[ PC changes
* Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free the g_strdup_printf() string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Separate out the XilinxSPIPS struct into a separate header
file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Me52
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 20 Jan 2016 15:37:57 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
iotests: Test that throttle values ranges
blockdev: Error out on negative throttling option values
vmdk: Create streamOptimized as version 3
qcow2: Make image inaccessible after failed qcow2_invalidate_cache()
qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache()
qcow2: Implement .bdrv_inactivate
block: Inactivate BDS when migration completes
block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVE
block: Fix error path in bdrv_invalidate_cache()
block: Assert no write requests under BDRV_O_INCOMING
qcow2: Write full header on image creation
qcow2: Write feature table only for v3 images
block: Clean up includes
qemu-iotests: Reduce racy output in 028
qemu-img: Speed up comparing empty/zero images
block/raw-posix: avoid bogus fixup for cylinders on DASD disks
block: Fix .bdrv_open flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eFG+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-next-2016-01-20-1' into staging
I/O channels fixes 2016/01/20 v1
# gpg: Signature made Wed 20 Jan 2016 11:31:47 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-next-2016-01-20-1:
io: use memset instead of { 0 } for initializing array
io: fix description of @errp parameter initialization
io: some fixes to handling of /dev/null when running commands
io: increment counter when killing off subcommand
io: fix sign of errno value passed to error report
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=CccP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-socket-20160120-1' into staging
Convert qemu-socket to use QAPI exclusively, update MAINTAINERS.
# gpg: Signature made Wed 20 Jan 2016 06:49:07 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-socket-20160120-1:
vnc: distiguish between ipv4/ipv6 omitted vs set to off
sockets: remove use of QemuOpts from socket_dgram
sockets: remove use of QemuOpts from socket_connect
sockets: remove use of QemuOpts from socket_listen
sockets: remove use of QemuOpts from header file
add MAINTAINERS entry for qemu socket code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
extract_common_blockdev_options() uses qemu_opt_get_number() to parse
the bps/iops numbers to uint64_t, then converts to double and stores in
ThrottleConfig. The actual parsing is done by strtoull() in
parse_option_number(). Negative numbers are wrapped to large positive
ones, and stored.
We used to reject negative numbers since 7d81c1413c, but this regressed
when the option parsing code was changed later. Now fix this again.
This time, define an arbitrary large upper limit (1e15), and check the
values so both negative and impractically big numbers are caught and
reported.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So far, live migration with shared storage meant that the image is in a
not-really-ready don't-touch-me state on the destination while the
source is still actively using it, but after completing the migration,
the image was fully opened on both sides. This is bad.
This patch adds a block driver callback to inactivate images on the
source before completing the migration. Inactivation means that it goes
to a state as if it was just live migrated to the qemu instance on the
source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue
either on the source or on the destination, which takes ownership of the
image.
A typical migration looks like this now with respect to disk images:
1. Destination qemu is started, the image is opened with
BDRV_O_INACTIVE. The image is fully opened on the source.
2. Migration is about to complete. The source flushes the image and
inactivates it. Now both sides have the image opened with
BDRV_O_INACTIVE and are expecting the other side to still modify it.
3. One side (the destination on success) continues and calls
bdrv_invalidate_all() in order to take ownership of the image again.
This removes BDRV_O_INACTIVE on the resuming side; the flag remains
set on the other side.
This ensures that the same image isn't written to by both instances
(unless both are resumed, but then you get what you deserve). This is
important because .bdrv_close for non-BDRV_O_INACTIVE images could write
to the image file, which is definitely forbidden while another host is
using the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Instead of covering only the state of images on the migration
destination before the migration is completed, the flag will also cover
the state of images on the migration source after completion. This
common state implies that the image is technically still open, but no
writes will happen and any cached contents will be reloaded from disk if
and when the image leaves this state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The socket_dgram method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_dgram_opts helper method. By converting the latter to
use QAPI SocketAddress directly, the QemuOpts conversion
step can be eliminated.
This removes the very last use of QemuOpts from the
sockets code, so the socket_optslist[] array is also
removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-5-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are no callers of the sockets methods which accept
QemuOpts any more. Make all the QemuOpts related functions
static to avoid new callers being added, in preparation
for removal of all QemuOpts usage, in favour of QAPI
SocketAddress.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452518225-11751-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When there are many instances of a given class, registering
properties against the instance is wasteful of resources. The
majority of objects have a statically defined list of possible
properties, so most of the properties are easily registerable
against the class. Only those properties which are conditionally
registered at runtime need be recorded against the klass.
Registering properties against classes also makes it possible
to provide static introspection of QOM - currently introspection
is only possible after creating an instance of a class, which
severely limits its usefulness.
This impl only supports simple scalar properties. It does not
attempt to allow child object / link object properties against
the class. There are ways to support those too, but it would
make this patch more complicated, so it is left as an exercise
for the future.
There is no equivalent to object_property_del() provided, since
classes must be immutable once they are defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Even without line editing, this makes -qmp vc more pleasant with the
GTK+ backend. The only issue is that set_echo is invoked very early,
long before a vc is actually associated with a VirtualConsole. To work
around this, create a temporary VirtualConsole until then.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450356422-31710-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJWmjhGAAoJEFvCxW+uDzIfqKQH/2EufdrY9s1mxc1cUwrViBex
ZmCPqQLRU6rwMYsLwG9IKZO1dMujSMJRRqxb2l7I1eL/qNBoNfxD7sm8GzjqW1Rk
T8V4ItMtSdxAQVLZUS02NgdioXWI2KCkK5iw6Bev4OX9IKOyncnaVd+0J3ICQaDx
oADkvRCBi7qU+CEbPz+qVfmkZHoPLlkBWLX8LthKrlOdPMhXR4Sm9TpQhLGfoOOD
ro4DS2EtfFy/cSUJ/vd3jzBdRZ1s7Wb81lF37hZVlJf0zXemit0eMYS3LnldysnX
8OUCgDl8ezqD58JNHnpbR1gNx+p/E41ereJhHpBlwfB6ujDI0ladzMDR4dk/iX4=
=NQ/Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Sat 16 Jan 2016 12:32:06 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
* remotes/mcayland/tags/qemu-sparc-signed:
target-sparc: Migrate CWP and PIL for SPARC64
target-sparc: Use VMState arrays for SPARC64 TLB/MMU state
target-sparc: Convert to VMStateDescription
target-sparc: Don't flush TLB in cpu_load function
target-sparc: Split cpu_put_psr into side-effect and no-side-effect parts
vmstate: define vmstate_info_uinttl
vmstate: Introduce VMSTATE_VARRAY_MULTPLY
vmstate: introduce CPU_DoubleU arrays
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to define arrays of this type, so we need the integer type.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: updated to apply on current QEMU; renamed to 'uinttl'
rather than 'uinttls' to match other vmstate naming]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows to send a partial array where the size is another
structure field multiplied by a constant.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: updated to current master]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add vmstate support for migrating arrays of CPU_DoubleU via
VMSTATE_CPUDOUBLE_ARRAY.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: rebased, since files have all moved since 2012;
added VMSTATE_CPUDOUBLE_ARRAY_V for consistency with FLOAT64]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The amount of memory allocated in nbd_co_receive_request is driven by the
NBD client (possibly a virtual machine). Parallel I/O can cause the
server to allocate a large amount of memory; check for failures and
return ENOMEM in that case.
Cc: qemu-block@nongnu.org
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the parameter "close" to "close_fn" to disambiguous with
close(2).
This unifies error handling paths of NBDClient allocation:
nbd_client_new will shutdown the socket and call the "close_fn" callback
if negotiation failed, so the caller don't need a different path than
the normal close.
The returned pointer is never used, make it void in preparation for the
next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-char.c contains two helper methods send_all
and recv_all. These are in fact declared in sockets.h
so ought to have been in util/qemu-sockets.c. For added
fun the impl of recv_all is completely missing on Win32.
Fortunately there is only a single caller of these
methods, the TPM passthrough code, which is only
ever compiled on Linux. With only a single caller
these helpers are not compelling enough to keep so
inline them in the TPM code, avoiding the need to
fix the missing recv_all on Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1450879144-17111-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pvscsi's x-disable-pcie and x-old-pci-configuration backward compat
properties were introduced in 952970b and d5da3ef:
vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property
vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property
and were placed into HW_COMPAT_2_4.
However since these commits were pulled post v2.5, move them to
HW_COMPAT_2_5.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1450900558-20113-1-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-8-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
crash assumes the physical base in the kdump subheader of
makedumpfile formatted dumps is correct. Zero is not correct
for all architectures, so allow it to be changed.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-5-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is necessary for targets that don't have TARGET_PAGE_SIZE ==
real-target-page-size. The target should set the page size to the
correct one, if known, or, if not known, to the maximum page size
it supports.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-4-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
- A 2GB region starting at 0
- A 32GB region starting at 32GB
- A 256GB region starting at 768GB
This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.
On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xen_ram_alloc() dies with hw_error() on error, even though its caller
ram_block_add() handles errors just fine. Add an Error **errp
parameter and use it.
Leave case RUN_STATE_INMIGRATE alone, because that looks like some
kind of warning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
xen_hvm_init() returns -1 without cleaning up on some errors (harmless
long as the caller exit()s on error), dies with hw_error() on others.
hw_error() isn't approprate here. Clean up to exit() on all errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
