We recently relaxed the limit of the number of opcodes that can
appear in a TranslationBlock. In certain cases this has resulted
in relocation overflow.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code sequence we were generating was only good for unsigned
comparisons. For signed comparisions, use the sequence from gcc.
Fixes booting of ppc64 firmware, with a patch changing the code
sequence for ppc comparisons.
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* SDHCI: cleanups and minor bug fixes
* target/arm: minor refactor preparatory to fp16 support
* omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
card on controller reset (fixes migration failures)
* target/arm: Handle page table walk load failures correctly
* hw/arm/virt: Add virt-2.12 machine type
* get_phys_addr_pmsav7: Support AP=0b111 for v7M
* hw/intc/armv7m: Support byte and halfword accesses to CFSR
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G4xE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180116' into staging
target-arm queue:
* SDHCI: cleanups and minor bug fixes
* target/arm: minor refactor preparatory to fp16 support
* omap_ssd, ssi-sd, pl181, milkymist-memcard: reset the SD
card on controller reset (fixes migration failures)
* target/arm: Handle page table walk load failures correctly
* hw/arm/virt: Add virt-2.12 machine type
* get_phys_addr_pmsav7: Support AP=0b111 for v7M
* hw/intc/armv7m: Support byte and halfword accesses to CFSR
# gpg: Signature made Tue 16 Jan 2018 13:33:31 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180116: (24 commits)
sdhci: add a 'dma' property to the sysbus devices
sdhci: fix the PCI device, using the PCI address space for DMA
sdhci: Implement write method of ACMD12ERRSTS register
sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only
sdhci: rename the SDHC_CAPAB register
sdhci: move MASK_TRNMOD with other SDHC_TRN* defines in "sd-internal.h"
sdhci: convert the DPRINT() calls into trace events
sdhci: use qemu_log_mask(UNIMP) instead of fprintf()
sdhci: refactor common sysbus/pci unrealize() into sdhci_common_unrealize()
sdhci: refactor common sysbus/pci realize() into sdhci_common_realize()
sdhci: refactor common sysbus/pci class_init() into sdhci_common_class_init()
sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci properties
sdhci: remove dead code
sdhci: clean up includes
target/arm: Add fp16 support to vfp_expand_imm
target/arm: Split out vfp_expand_imm
hw/sd/omap_mmc: Reset SD card on controller reset
hw/sd/ssi-sd: Reset SD card on controller reset
hw/sd/milkymist-memcard: Reset SD card on controller reset
hw/sd/pl181: Reset SD card on controller reset
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This script allows analysis of mutex acquisition and hold times based
on a trace file. Given a trace control file of:
qemu_mutex_lock
qemu_mutex_locked
qemu_mutex_unlock
And running with:
$QEMU $QEMU_ARGS -trace events=./lock-trace
You can analyse the results with:
./scripts/analyse-locks-simpletrace.py trace-events-all ./trace-21812
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flushing TB cache is required because TBs key in the cache may match
different code which existed in the previous state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-Id: <20180110134846.12940.99993.stgit@pasha-VirtualBox>
[Add comment suggested by Peter Maydell. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
in case of unaligned requests or on a target that does not support
block provisioning we leave iTask uninitialized and check iTask.task
for NULL later.
Fixes: e38bc23454
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1515425247-21730-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty bitmaps are built from 'long's and there is fast-path code
for synchronising the case where the RAMBlock is aligned to the start
of a long boundary. Align the allocation to this boundary
to cause the fast path to be used.
Offsets before change:
11398@1515169675.018566:find_ram_offset size: 0x1e0000 @ 0x8000000
11398@1515169675.020064:find_ram_offset size: 0x20000 @ 0x81e0000
11398@1515169675.020244:find_ram_offset size: 0x20000 @ 0x8200000
11398@1515169675.024343:find_ram_offset size: 0x1000000 @ 0x8220000
11398@1515169675.025154:find_ram_offset size: 0x10000 @ 0x9220000
11398@1515169675.027682:find_ram_offset size: 0x40000 @ 0x9230000
11398@1515169675.032921:find_ram_offset size: 0x200000 @ 0x9270000
11398@1515169675.033307:find_ram_offset size: 0x1000 @ 0x9470000
11398@1515169675.033601:find_ram_offset size: 0x1000 @ 0x9471000
after change:
10923@1515169108.818245:find_ram_offset size: 0x1e0000 @ 0x8000000
10923@1515169108.819410:find_ram_offset size: 0x20000 @ 0x8200000
10923@1515169108.819587:find_ram_offset size: 0x20000 @ 0x8240000
10923@1515169108.823708:find_ram_offset size: 0x1000000 @ 0x8280000
10923@1515169108.824503:find_ram_offset size: 0x10000 @ 0x9280000
10923@1515169108.827093:find_ram_offset size: 0x40000 @ 0x92c0000
10923@1515169108.833045:find_ram_offset size: 0x200000 @ 0x9300000
10923@1515169108.833504:find_ram_offset size: 0x1000 @ 0x9500000
10923@1515169108.833787:find_ram_offset size: 0x1000 @ 0x9540000
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180105170138.23357-3-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add some comments so I can understand the various nested loops.
Add some tracing so I can see what they're doing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180105170138.23357-2-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code has an optimised, word aligned version, and a boring
unaligned version. My commit f70d345 fixed one alignment issue, but
there's another.
The optimised version operates on 'longs' dealing with (typically) 64
pages at a time, replacing the whole long by a 0 and counting the bits.
If the Ramblock is less than 64bits in length that long can contain bits
representing two different RAMBlocks, but the code will update the
bmap belinging to the 1st RAMBlock only while having updated the total
dirty page count for both.
This probably didn't matter prior to 6b6712ef which split the dirty
bitmap by RAMBlock, but now they're separate RAMBlocks we end up
with a count that doesn't match the state in the bitmaps.
Symptom:
Migration showing a few dirty pages left to be sent constantly
Seen on aarch64 and x86 with x86+ovmf
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Wei Huang <wei@redhat.com>
Fixes: 6b6712efcc
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use of a loop construct for code that is not intended to repeat
does not make much idiomatic sense, except in one place: it is a
common usage in macros in order to wrap arbitrary code with
single-statement semantics. But when used in a macro, it is more
typical for the caller to supply the trailing ';' when calling
the macro.
Although qemu coding style frowns on bare:
if (cond)
statement1;
else
statement2;
where extra semicolons actually cause syntax errors, we still
want our macro styles to be easily copied to other projects.
Thus, declare it an error if we encounter any form of 'while (0)'
with a semicolon in the same line.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-8-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use of a do/while(0) loop as a way to allow break statements in
the middle of execute-once code is unusual. More typical is
the use of goto for early exits, with a label at the end of
the execute-once code, rather than nesting code in a scope;
however, the comment at the end of the existing code makes this
alternative a bit unpractical.
So, to avoid false positives from a future syntax check about
'while (false);', and to keep the loop form (in case someone
ever does add DONTWAIT support, where they can just as easily
manipulate the initial loop condition or add an if around the
final 'break'), I opted to use the form of a while(1) loop (the
break as an early exit is more idiomatic there), coupled with
a final break preserving the original comment.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-6-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch left in an extra scope layer for ease of
review; time to remove it. No semantic change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-5-eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use of a do/while(0) control flow in order to permit an early break
is an unusual paradigm, and triggers a false positive with a planned
future syntax check against 'while (0);'. Rewrite the code to use a
goto instead. This patch temporarily keeps an extra level of
indentation to highlight the change; the next patch cleans it up.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-4-eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is more typical to provide the ';' by the caller of a macro
than to embed it in the macro itself; this is because syntax
highlight engines can get confused if a macro is called without
a semicolon before the closing '}'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171201232433.25193-3-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For a couple of macros in pcnet.c, we have to provide a new scope
to avoid compiler warnings about declarations in the middle of a
switch statement that aren't in a sub-scope. But use of
'do { ... } while (0);' merely to provide that new scope is arcane
overkill, compared to just using '{ ... }'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20171201232433.25193-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
entry is moved from list but is not freed.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-Id: <20171225024704.19540-1-linzhecheng@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except for round-robin TCG, every other accelerator is using more or
less the same code around qemu_wait_io_event_common. The exception
is HAX, which also has to eat the dummy APC that is queued by
qemu_cpu_kick_thread.
We can add the SleepEx call to qemu_wait_io_event under "if
(!tcg_enabled())", since that is the condition that is used in
qemu_cpu_kick_thread, and unify the function for KVM, HAX, HVF and
multi-threaded TCG. Single-threaded TCG code can also be simplified
since it is only used in the round-robin, sleep-if-all-CPUs-idle case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds saving and restoring of the icount warp
timers in the vmstate.
It is needed because there timers affect the virtual clock value.
Therefore determinism of the execution in icount record/replay mode
depends on determinism of the timers.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This introduces the qemu-gdb command "qemu timers" which will dump the
state of the main timers in the system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_update_hflags reference env->efer which is updated in hax_get_msrs,
so it has to be called after hax_get_msrs. This fix the bug that sometimes
dump_state show 32 bits regs even in 64 bits mode.
Signed-off-by: Tao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-3-lepton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change to use x86_update_hflags instead of keeping another copy
at hax side. This also fix bug like HF_CPL_MASK should be SS.DPL,
not CS.DPL.
Signed-off-by: Tao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-2-lepton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will share the same code for hax/kvm.
Signed-off-by: Tao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-1-lepton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The raspi2 machine supports loading firmware images, so we can easily
load a small test sequence as raw binary blob here to test the UART.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-8-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that moxiesim supports the -bios parameter, we can check this machine
in the boot-serial tester, too, by supplying a mini bios that only writes
'T' characters to the UART.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-7-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds two simple TCG + UART tests for the microblaze boards,
one in big endian mode, and one in little endian mode.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_write_same_complete() can retry the write if the request was
unaligned. Make sure to release the AioContext when that code path is
taken!
This patch fixes a hang when QEMU terminates after an unaligned WRITE
SAME request has been processed with dataplane. The hang occurs because
iothread_stop_all() cannot acquire the AioContext lock that was leaked
by the IOThread in scsi_write_same_complete().
Fixes: b9e413dd37 ("block: explicitly acquire aiocontext in aio callbacks that need it").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180104142502.15175-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Spotted thanks to ASAN:
==25226==ERROR: AddressSanitizer: global-buffer-overflow on address 0x556715a1f120 at pc 0x556714b6f6b1 bp 0x7ffcdfac1360 sp 0x7ffcdfac1350
READ of size 1 at 0x556715a1f120 thread T0
#0 0x556714b6f6b0 in init_disasm /home/elmarco/src/qemu/disas/s390.c:219
#1 0x556714b6fa6a in print_insn_s390 /home/elmarco/src/qemu/disas/s390.c:294
#2 0x55671484d031 in monitor_disas /home/elmarco/src/qemu/disas.c:635
#3 0x556714862ec0 in memory_dump /home/elmarco/src/qemu/monitor.c:1324
#4 0x55671486342a in hmp_memory_dump /home/elmarco/src/qemu/monitor.c:1418
#5 0x5567148670be in handle_hmp_command /home/elmarco/src/qemu/monitor.c:3109
#6 0x5567148674ed in qmp_human_monitor_command /home/elmarco/src/qemu/monitor.c:613
#7 0x556714b00918 in qmp_marshal_human_monitor_command /home/elmarco/src/qemu/build/qmp-marshal.c:1704
#8 0x556715138a3e in do_qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:104
#9 0x556715138f83 in qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:131
#10 0x55671485cf88 in handle_qmp_command /home/elmarco/src/qemu/monitor.c:3839
#11 0x55671514e80b in json_message_process_token /home/elmarco/src/qemu/qobject/json-streamer.c:105
#12 0x5567151bf2dc in json_lexer_feed_char /home/elmarco/src/qemu/qobject/json-lexer.c:323
#13 0x5567151bf827 in json_lexer_feed /home/elmarco/src/qemu/qobject/json-lexer.c:373
#14 0x55671514ee62 in json_message_parser_feed /home/elmarco/src/qemu/qobject/json-streamer.c:124
#15 0x556714854b1f in monitor_qmp_read /home/elmarco/src/qemu/monitor.c:3881
#16 0x556715045440 in qemu_chr_be_write_impl /home/elmarco/src/qemu/chardev/char.c:172
#17 0x556715047184 in qemu_chr_be_write /home/elmarco/src/qemu/chardev/char.c:184
#18 0x55671505a8e6 in tcp_chr_read /home/elmarco/src/qemu/chardev/char-socket.c:440
#19 0x5567150943c3 in qio_channel_fd_source_dispatch /home/elmarco/src/qemu/io/channel-watch.c:84
#20 0x7fb90292b90b in g_main_dispatch ../glib/gmain.c:3182
#21 0x7fb90292c7ac in g_main_context_dispatch ../glib/gmain.c:3847
#22 0x556715162eca in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#23 0x556715163001 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#24 0x5567151631fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#25 0x556714ad6d3b in main_loop /home/elmarco/src/qemu/vl.c:1950
#26 0x556714ade329 in main /home/elmarco/src/qemu/vl.c:4865
#27 0x7fb8fe5c9009 in __libc_start_main (/lib64/libc.so.6+0x21009)
#28 0x5567147af4d9 in _start (/home/elmarco/src/qemu/build/s390x-softmmu/qemu-system-s390x+0xf674d9)
0x556715a1f120 is located 32 bytes to the left of global variable 'char_hci_type_info' defined in '/home/elmarco/src/qemu/hw/bt/hci-csr.c:493:23' (0x556715a1f140) of size 104
0x556715a1f120 is located 8 bytes to the right of global variable 's390_opcodes' defined in '/home/elmarco/src/qemu/disas/s390.c:860:33' (0x556715a15280) of size 40600
This fix is based on Andreas Arnez <arnez@linux.vnet.ibm.com> upstream
commit:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=9ace48f3d7d80ce09c5df60cccb433470410b11b
2014-08-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-dis.c (init_disasm): Simplify initialization of
opc_index[]. This also fixes an access after the last element
of s390_opcodes[].
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The coroutine is not finished by the time the test ends, resulting in
ASAN warning:
==7005==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 312 byte(s) in 1 object(s) allocated from:
#0 0x7fd35290fa38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7fd3506c5f75 in g_malloc0 ../glib/gmem.c:124
#2 0x55994af03e47 in qemu_coroutine_new /home/elmarco/src/qemu/util/coroutine-ucontext.c:144
#3 0x55994aefed99 in qemu_coroutine_create /home/elmarco/src/qemu/util/qemu-coroutine.c:76
#4 0x55994ac1eb50 in verify_entered_step_1 /home/elmarco/src/qemu/tests/test-coroutine.c:80
#5 0x55994af03c75 in coroutine_trampoline /home/elmarco/src/qemu/util/coroutine-ucontext.c:119
#6 0x7fd34ec02bef (/lib64/libc.so.6+0x50bef)
Do not yield() to let the coroutine terminate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180104160523.22995-17-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Direct leak of 913 byte(s) in 43 object(s) allocated from:
#0 0x55880a15df60 in __interceptor_malloc (/home/elmarco/src/qq/build/tests/qmp-test+0x110f60)
#1 0x7f3f20fd098f in _IO_vasprintf (/lib64/libc.so.6+0x8098f)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Direct leak of 160 byte(s) in 4 object(s) allocated from:
#0 0x55ed7678cda8 in calloc (/home/elmarco/src/qq/build/x86_64-softmmu/qemu-system-x86_64+0x797da8)
#1 0x7f3f5e725f75 in g_malloc0 /home/elmarco/src/gnome/glib/builddir/../glib/gmem.c:124
#2 0x55ed778aa3a7 in query_option_descs /home/elmarco/src/qq/util/qemu-config.c:60:16
#3 0x55ed778aa307 in get_drive_infolist /home/elmarco/src/qq/util/qemu-config.c:140:19
#4 0x55ed778a9f40 in qmp_query_command_line_options /home/elmarco/src/qq/util/qemu-config.c:254:36
#5 0x55ed76d4868c in qmp_marshal_query_command_line_options /home/elmarco/src/qq/build/qmp-marshal.c:3078:14
#6 0x55ed77855dd5 in do_qmp_dispatch /home/elmarco/src/qq/qapi/qmp-dispatch.c:104:5
#7 0x55ed778558cc in qmp_dispatch /home/elmarco/src/qq/qapi/qmp-dispatch.c:131:11
#8 0x55ed768b592f in handle_qmp_command /home/elmarco/src/qq/monitor.c:3840:11
#9 0x55ed7786ccfe in json_message_process_token /home/elmarco/src/qq/qobject/json-streamer.c:105:5
#10 0x55ed778fe37c in json_lexer_feed_char /home/elmarco/src/qq/qobject/json-lexer.c:323:13
#11 0x55ed778fdde6 in json_lexer_feed /home/elmarco/src/qq/qobject/json-lexer.c:373:15
#12 0x55ed7786cd83 in json_message_parser_feed /home/elmarco/src/qq/qobject/json-streamer.c:124:12
#13 0x55ed768b559e in monitor_qmp_read /home/elmarco/src/qq/monitor.c:3882:5
#14 0x55ed77714f29 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:167:9
#15 0x55ed77714fde in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:179:9
#16 0x55ed7772ffad in tcp_chr_read /home/elmarco/src/qq/chardev/char-socket.c:440:13
#17 0x55ed7777113b in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84:12
#18 0x7f3f5e71d90b in g_main_dispatch /home/elmarco/src/gnome/glib/builddir/../glib/gmain.c:3182
#19 0x7f3f5e71e7ac in g_main_context_dispatch /home/elmarco/src/gnome/glib/builddir/../glib/gmain.c:3847
#20 0x55ed77886ffc in glib_pollfds_poll /home/elmarco/src/qq/util/main-loop.c:214:9
#21 0x55ed778865fd in os_host_main_loop_wait /home/elmarco/src/qq/util/main-loop.c:261:5
#22 0x55ed77886222 in main_loop_wait /home/elmarco/src/qq/util/main-loop.c:515:11
#23 0x55ed76d2a4df in main_loop /home/elmarco/src/qq/vl.c:1995:9
#24 0x55ed76d1cb4a in main /home/elmarco/src/qq/vl.c:4914:5
#25 0x7f3f555f6039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Direct leak of 12 byte(s) in 2 object(s) allocated from:
#0 0x7f50d403c850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f50d1ddf98f in vasprintf (/lib64/libc.so.6+0x8098f)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes leaks such as:
Direct leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x7eff58beb850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7eff57942f0c in g_malloc ../glib/gmem.c:94
#2 0x7eff579431cf in g_malloc_n ../glib/gmem.c:331
#3 0x7eff5795f6eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55db720f1d46 in readline_hist_add /home/elmarco/src/qq/util/readline.c:258
#5 0x55db720f2d34 in readline_handle_byte /home/elmarco/src/qq/util/readline.c:387
#6 0x55db71539d00 in monitor_read /home/elmarco/src/qq/monitor.c:3896
#7 0x55db71f9be35 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:167
#8 0x55db71f9bed3 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:179
#9 0x55db71fa013c in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66
#10 0x55db71fe18a8 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84
#11 0x7eff5793a90b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7eff5793b7ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55db720af3bd in glib_pollfds_poll /home/elmarco/src/qq/util/main-loop.c:214
#14 0x55db720af505 in os_host_main_loop_wait /home/elmarco/src/qq/util/main-loop.c:261
#15 0x55db720af6d6 in main_loop_wait /home/elmarco/src/qq/util/main-loop.c:515
#16 0x55db7184e0de in main_loop /home/elmarco/src/qq/vl.c:1995
#17 0x55db7185e956 in main /home/elmarco/src/qq/vl.c:4914
#18 0x7eff4ea17039 in __libc_start_main (/lib64/libc.so.6+0x21039)
(while at it, use g_new0(ReadLineState), it's a bit easier to read)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that data_dir[] will now point to allocated strings.
Fixes:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7f1448181850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f1446ed8f0c in g_malloc ../glib/gmem.c:94
#2 0x7f1446ed91cf in g_malloc_n ../glib/gmem.c:331
#3 0x7f1446ef739a in g_strsplit ../glib/gstrfuncs.c:2364
#4 0x55cf276439d7 in main /home/elmarco/src/qq/vl.c:4311
#5 0x7f143dfad039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-10-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
/public/qobject_is_equal_conversion: OK
=================================================================
==14396==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 56 byte(s) in 1 object(s) allocated from:
#0 0x7f07682c5850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f0767d12f0c in g_malloc ../glib/gmem.c:94
#2 0x7f0767d131cf in g_malloc_n ../glib/gmem.c:331
#3 0x562bd767371f in do_test_equality /home/elmarco/src/qq/tests/check-qobject.c:49
#4 0x562bd7674a35 in qobject_is_equal_dict_test /home/elmarco/src/qq/tests/check-qobject.c:267
#5 0x7f0767d37b04 in test_case_run ../glib/gtestutils.c:2237
#6 0x7f0767d37ec4 in g_test_run_suite_internal ../glib/gtestutils.c:2321
#7 0x7f0767d37f6d in g_test_run_suite_internal ../glib/gtestutils.c:2333
#8 0x7f0767d38184 in g_test_run_suite ../glib/gtestutils.c:2408
#9 0x7f0767d36e0d in g_test_run ../glib/gtestutils.c:1674
#10 0x562bd7674e75 in main /home/elmarco/src/qq/tests/check-qobject.c:327
#11 0x7f0766009039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a 'dma' property allowing machine creation to provide the address-space
SDHCI DMA operates on.
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2016.1]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180115182436.2066-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While SysBus devices can use the get_system_memory() address space,
PCI devices should use the bus master address space for DMA.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180115182436.2066-14-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
zero-initialize ADMADescr 'dscr' in sdhci_do_adma() to avoid:
hw/sd/sdhci.c: In function ‘sdhci_do_adma’:
hw/sd/sdhci.c:714:29: error: ‘dscr.addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
trace_sdhci_adma("link", s->admasysaddr);
^
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
