This broke due to r7230.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7233 c046a42c-6fe2-441c-8c8c-71466251a162
Currently IRQ are reinjected as soon as they are acknowledged to
the RTC, but Windows sometimes do acknowledgement in a loop with
global interrupt disabled waiting for interrupt to be cleared and
it does not mask RTC vector in PIC/APIC while doing this. In such
situation interrupt injection always fails and RTC interrupt is never
cleared.
Instead of reinjecting coalesced IRQs on acknowledgement the patch below
reinjects them by accelerating RTC clock a bit. This way RTC interrupt
is not constantly raced after coalesced interrupt.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
If fault happened during event delivery exit_int_info should contain
valid info about the event on vm exit.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7230 c046a42c-6fe2-441c-8c8c-71466251a162
this patch adds a buffer_alignment field to BlockDriverState and
implements a qemu_blockalign function that uses that field to allocate a
memory aligned buffer to be used by the block driver.
buffer_alignment is initialized to 512 but each block driver can set
a different value (at the moment none of them do).
This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to
use qemu_blockalign instead of qemu_memalign.
There is only one place left that still uses qemu_memalign to allocate
buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw
because it is not possible to get the BlockDriverState from that
function. However I think it is not important because posix-aio-compat
already deals with driver specific code so it is supposed to know its
own needs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7229 c046a42c-6fe2-441c-8c8c-71466251a162
This adds domain building support for paravirtual domains to qemu.
This allows booting xen guests directly with qemu, without Xend
and the management stack.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu create backend and frontend device entries in
xenstore for devices configured on the command line. It will use
qdisk and qnic backend names, so the qemu internal backends will
be used.
Disks can be created using -drive if=xen,file=...
Nics can be created using -net nic,macaddr=...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a network interface backend driver to qemu. It is a pure
userspace implemention using the gntdev interface. It uses "qnet" as
backend name in xenstore so it doesn't interfere with the netback
backend (aka "vnif").
The network backend is hooked into the corrosponding qemu vlan, i.e.
vif 0 is hooked into vlan 0. To make the packages actually arrive
somewhere you additionally have to link the vlan to the outside world
using the usual qemu command line options such as "-net tap,...".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a block device backend driver to qemu. It is a pure
userspace implemention using the gntdev interface. It uses "qdisk" as
backend name in xenstore so it doesn't interfere with the other existing
backends (blkback aka "vbd" and tapdisk aka "tap").
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It
it based on current xen-unstable code. It has been changed to make
use of the common backend driver code. It also has been changed to
compile with xen headers older than release 3.3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a xenconsole backend driver. It it based on current
xen-unstable code. It has been changed to make use of the common
backend driver code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds infrastructure for xen backend drivers living in qemu,
so drivers don't need to implement common stuff on their own. It's
mostly xenbus management stuff: some functions to access xentore,
setting up xenstore watches, callbacks on device discovery and state
changes, handle event channel, ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
- configure script and build system changes.
- wind up new machine type.
- add -xen-* command line options.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
From: Kevin Wolf <kwolf@redhat.com>
All L1 and L2 entries must point at the start of a cluster. If there is some
offset into the cluster, the entry is corrupted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7217 c046a42c-6fe2-441c-8c8c-71466251a162
This is purely cosmetical changes to make the code easier to read. Move L2
table processing from a deeply nested block to its own function, add some
comments.
Patch v2: Fix misplaced bracket causing false positives
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7216 c046a42c-6fe2-441c-8c8c-71466251a162
From: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can provide check functions, expose them through
qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
From: Kevin Wolf <kwolf@redhat.com>
Introduce a new bdrv_check function pointer for block drivers. Modify qcow2 to
return an error status in check_refcounts(), so it can implement bdrv_check.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7214 c046a42c-6fe2-441c-8c8c-71466251a162
From: Kevin Wolf <kwolf@redhat.com>
This code is currently only compiled when DEBUG_ALLOC is defined, so you
usually don't see compiler warnings on it. This patch series wants to enable
the code, so fix the format string warnings first.
While we're at it, let's print error messages to stderr.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7213 c046a42c-6fe2-441c-8c8c-71466251a162
uses the QEMU firmware configuration interfacce to send the NUMA
topology to the BIOS, which has to setup the tables. Only one firmware
configuration channel is used.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
adds an "info numa" command to the monitor to output the current
topology. Since NUMA is advertised via static ACPI tables, no changes are
possible during runtime.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
adds a -numa command line parameter and sets a QEMU global array with
the memory sizes. The CPU-to-node assignemnt is written into the
CPUState. If no specific values for memory and CPUs are given,
all resources will be split equally across all nodes.
This code currently support only up to 64 virtual CPUs.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
The slirp stack is full of global variables which prevents instantiating
it more than once. Catch this during net_slirp_init to prevent more harm
later on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162
Allow to establish a TCP/UDP connection redirection also via a monitor
command 'host_net_redir'. Moreover, assume TCP as connection type if
that parameter is omitted.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
Queue packets that are send during an ongoing packet delivery. This
ensures that packets will always arrive in their logical order at each
client of a VLAN. Currently, slirp generates such immediate relies, and
e.g. packet-sniffing clients on the same VLAN may get confused.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
There is nothing x86-specific in host_net_add/remove, so allow them for
all targets.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the documentation of the host_net_add monitor command and allow the
user to pass no options at all. Moreover, inform the user on the
monitor terminal if a request failed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
This patch is derived from Tristan Gingold's patch. It adds a new VLAN
client type that writes all traffic on the VLAN it is attached to into a
pcap file. Such a file can then be analyzed offline with Wireshark or
tcpdump.
Besides rebasing and some minor cleanups, the major differences to the
original version are:
- support for enabling/disabling via the monitor (host_net_add/remove)
- no special ordering of VLAN client list, qemu_send_packet now takes
care of properly ordered packets
- 64k default capturing limit (I hate tcpdump's default)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
This adds proper handling of the ciaddr field as well as the "Requested
IP Address" option to slirp's DHCP server. If the client requests an
invalid or used IP, a NAK reply is sent, if it requests a specific but
valid IP, this is now respected.
NAK'ing invalid IPs is specifically useful when changing the slirp IP
range via '-net user,ip=...' while the client saved its previously used
address and tries to reacquire it. Now this will be NAK'ed and the
client will start a new discovery round.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
This aims at helping the user to find typos or other mistakes in
parameter lists passed for VLAN client initialization. The existing
parsing infrastructure does not allow a leaner approach, but this is
better than nothing IMHO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162
In case no symbolic name is provided when requesting VLAN connection via
listening TCP socket ('-net socket,listen=...'), qemu crashes. This
fixes the cause.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162
Make sure that we do not delete guest NICs via host_net_remove.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162
Also fixes a register corruption bug in do_sigreturn. When "returning"
from sigreturn we are actually restoring the virtual cpu state from the
signal frame. This is actually surprisingly hard to observe in practice.
Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives,
so the effect is a spurious syscall success and the introduction of a
subtle race condition.
On x86/arm a syscall modifies a single word sized register, so
do_sigreturn can just return that value. On MIPS a syscall clobbers
multiple registers, so we need additional smarts. My solution is to
invent a magic errno value that means "don't touch CPU state".
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
It makes usb keyboard available for sh4/r2d system emulation.
The changes for "hw/usb-ohci.c" are as follows.
- 'localmem_base' is introduced as OHCIState struct member.
SM501 has a local memory, and it is used to pass and receive data with
OHCI driver. OHCI driver accesses it with SH4 physical memory address,
and SM501 accesses it with SM501 local address. 'localmem_base' holds
where the SM501 local memory is mapped into SH4 physical address space.
- Memory access functions modified to adjust address with 'localmem_base'.
The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*().
- ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent
implementation.
For other source files, it does,
- introduces usb_ohci_init_sm501().
- adds irq argument for SM501 initialization, to emulate USB interrupts.
Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
In Linux kernel, fchmodat() and faccessat() take tree args.
4th value <int flags> is only processed by libc.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7187 c046a42c-6fe2-441c-8c8c-71466251a162
Version increase won't be helpful here. Spotted by Sergei Steshenko / Blau
Wirbel.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7186 c046a42c-6fe2-441c-8c8c-71466251a162
kqemu.o is compiled even if kqemu support is disabled. This is useless
(kqemu.o should provide nothing that is actually used in that case) and
slightly confusing. So introduce CONFIG_KQEMU for optionally compiling
kqemu.o.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7185 c046a42c-6fe2-441c-8c8c-71466251a162
Fix and cleanup IPCOP_sem* ipc calls handling and
implement sem* syscalls.
Riku:
1) Uglify whitespace so that diff gets smaller and easier
to review
2) use __get_user in target_to_host_sembuf
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7184 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a -P option to read and readv which allows to compare the read
data to a given pattern. This can be used to verify data written by write -P.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7182 c046a42c-6fe2-441c-8c8c-71466251a162
