Currently the documentation for Arm system emulator targets is in a
single target-arm.rst. This describes only some of the boards and
often in a fairly abbreviated fashion. Restructure it so that each
board has its own documentation file in the docs/system/arm/
subdirectory.
This will hopefully encourage us to write board documentation that
describes the board in detail, rather than a few brief paragraphs
in a single long page. The table of contents should also help users
to find the board they care about faster.
Once the structure is in place we'll be able to move microvm.rst
from the top-level docs/ directory.
All the text from the old page is retained, except for the final
paragraph ("A Linux 2.6 test image is available on the QEMU web site.
More information is available in the QEMU mailing-list archive."),
which is deleted. The git history shows this was originally added
in reference to the integratorcp board (at that time the only
Arm board that was supported), and has subsequently gradually been
further and further separated from the integratorcp documentation
by the insertion of other board documentation sections. It's
extremely out of date and no longer accurate, since AFAICT there
isn't an integratorcp kernel on the website any more; so better
deleted than retained.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-3-peter.maydell@linaro.org
These days device-hotplug.c only contains the hmp_drive_add
In the next patch, rest of hmp_drive* functions will be moved
there.
Also add block-hmp-cmds.h to contain prototypes of these
functions
License for block-hmp-cmds.h since it contains the code
moved from sysemu.h which lacks license and thus according
to LICENSE is under GPLv2+
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200308092440.23564-4-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The ppoll(2) and epoll(7) file descriptor monitoring implementations are
mixed with the core util/aio-posix.c code. Before adding another
implementation for Linux io_uring, extract out the existing
ones so there is a clear interface and the core code is simpler.
The new interface is AioContext->fdmon_ops, a pointer to a FDMonOps
struct. See the patch for details.
Semantic changes:
1. ppoll(2) now reflects events from pollfds[] back into AioHandlers
while we're still on the clock for adaptive polling. This was
already happening for epoll(7), so if it's really an issue then we'll
need to fix both in the future.
2. epoll(7)'s fallback to ppoll(2) while external events are disabled
was broken when the number of fds exceeded the epoll(7) upgrade
threshold. I guess this code path simply wasn't tested and no one
noticed the bug. I didn't go out of my way to fix it but the correct
code is simpler than preserving the bug.
I also took some liberties in removing the unnecessary
AioContext->epoll_available (just check AioContext->epollfd != -1
instead) and AioContext->epoll_enabled (it's implicit if our
AioContext->fdmon_ops callbacks are being invoked) fields.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-4-stefanha@redhat.com
Message-Id: <20200305170806.1313245-4-stefanha@redhat.com>
We can now delete the old .texi files, which we have been keeping in
the tree as a parallel set of documentation to the new rST sources.
The only remaining use of Texinfo is the autogenerated manuals
and HTML documents created from the QAPI JSON doc comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-33-peter.maydell@linaro.org
This doc was originally written by Daniel P. Berrangé
<berrange@redhat.com>, introduced via commit[1]: 2544e9e4aa (docs: add
guidance on configuring CPU models for x86, 2018-06-27).
In this patch:
- 1-1 conversion of Texinfo to rST, besides a couple of minor
tweaks that are too trivial to mention. (Thanks to Stephen
Finucane on IRC for the suggestion to use rST "definition lists"
instead of bullets in some places.)
Further modifications will be done via a separate patch.
- rST and related infra changes: manual page generation, Makefile
fixes, clean up references to qemu-cpu-models.texi, update year in
the copyright notice, etc.
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=2544e9e4aa
As part of the conversion, we use a more generic 'author' attribution
for the manpage than we previously had, as agreed with the original
author Dan Berrange.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-16-peter.maydell@linaro.org
Message-id: 20200226113034.6741-15-pbonzini@redhat.com
[Move macros to defs.rst.inc, split in x86 and MIPS parts,
make qemu-cpu-models.rst a standalone document. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: Move defs.rst.inc setup to its own commit;
fix minor issues with MAINTAINERS file updates;
drop copyright date change; keep capitalization of
"QEMU Project developers" consistent with other uses;
minor Makefile fixups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since qemu-doc.texi is mostly including files from docs/system,
move the existing include files there for consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-12-peter.maydell@linaro.org
Message-id: 20200226113034.6741-12-pbonzini@redhat.com
[PMM: update MAINTAINERS line for qemu-option-trace.texi]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MIPS CPU models end up in the middle of the PC documentation. Move
them to a separate file so that they can be placed in the right section.
The man page still includes both x86 and MIPS content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-5-peter.maydell@linaro.org
Message-id: 20200226113034.6741-5-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a kernel and initrd available on github which we can use
for testing this machine.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-3-philmd@redhat.com
Message-Id: <20200131170233.14584-1-thuth@redhat.com>
[PMD: Renamed test method, moved description from class to method]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Old kernels from the Meego project can be used to check that Linux
is at least starting on these machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-2-philmd@redhat.com
Message-Id: <20200129131920.22302-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test that verifies that each core properly displays the Tux
logo on the framebuffer device.
We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html
When OpenCV and NumPy are installed, this test can be run using:
$ avocado --show=app,framebuffer \
run -t cpu:i6400 \
tests/acceptance/machine_mips_malta.py
JOB ID : 54f3d8efd8674f289b8aa01a87f5d70c5814544c
JOB LOG : avocado/job-results/job-2020-02-01T20.52-54f3d8e/job.log
(1/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_1core:
framebuffer: found Tux at position (x, y) = (0, 0)
PASS (3.37 s)
(2/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_7cores:
framebuffer: found Tux at position (x, y) = (0, 0)
framebuffer: found Tux at position (x, y) = (88, 0)
framebuffer: found Tux at position (x, y) = (176, 0)
framebuffer: found Tux at position (x, y) = (264, 0)
framebuffer: found Tux at position (x, y) = (352, 0)
framebuffer: found Tux at position (x, y) = (440, 0)
framebuffer: found Tux at position (x, y) = (528, 0)
PASS (5.80 s)
(3/3) tests/acceptance/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_8cores:
framebuffer: found Tux at position (x, y) = (0, 0)
framebuffer: found Tux at position (x, y) = (88, 0)
framebuffer: found Tux at position (x, y) = (176, 0)
framebuffer: found Tux at position (x, y) = (264, 0)
framebuffer: found Tux at position (x, y) = (352, 0)
framebuffer: found Tux at position (x, y) = (440, 0)
framebuffer: found Tux at position (x, y) = (528, 0)
framebuffer: found Tux at position (x, y) = (616, 0)
PASS (6.67 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 16.79 s
If the AVOCADO_CV2_SCREENDUMP_PNG_PATH environment variable is set, the
test will save the screenshot with matched squares to it.
Test inspired by the following post:
https://www.mips.com/blog/how-to-run-smp-linux-in-qemu-on-a-mips64-release-6-cpu/
Kernel built with the following Docker file:
https://github.com/philmd/qemu-testing-blob/blob/malta_i6400/mips/malta/mips64el/Dockerfile
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200201204751.17810-1-f4bug@amsat.org>
Reactivate MIPS KVM maintainership with a modest goal of keeping
the support alive, checking common KVM code changes against MIPS
functionality, etc. (hence the status "Odd Fixes"), with hope that
this component will be fully maintained at some further, but not
distant point in future.
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1582545058-31609-2-git-send-email-aleksandar.markovic@rt-rk.com>
I haven't been active for 18 months, and don't have the hardware set up
to test KVM for MIPS, so mark it as orphaned and remove myself as
maintainer. Hopefully somebody from MIPS can pick this up.
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191221155306.49221-1-jhogan@kernel.org>
Add a new "virtio-iommu" section with the new files
related to this device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200214132745.23392-11-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Move to system/, as this is mostly about configuring vfio-ap.
Message-Id: <20200213162942.14177-3-cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While at it, also fix the numbering in 'What QEMU does'.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200213162942.14177-2-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
tests/fuzz/fuzz.c serves as the entry point for the virtual-device
fuzzer. Namely, libfuzzer invokes the LLVMFuzzerInitialize and
LLVMFuzzerTestOneInput functions, both of which are defined in this
file. This change adds a "FuzzTarget" struct, along with the
fuzz_add_target function, which should be used to define new fuzz
targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-13-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A program might rely on functions implemented in vl.c, but implement its
own main(). By placing main into a separate source file, there are no
complaints about duplicate main()s when linking against vl.o. For
example, the virtual-device fuzzer uses a main() provided by libfuzzer,
and needs to perform some initialization before running the softmmu
initialization. Now, main simply calls three vl.c functions which
handle the guest initialization, main loop and cleanup.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move vl.c to a separate directory, similar to linux-user/
Update the chechpatch and get_maintainer scripts, since they relied on
/vl.c for top_of_tree checks.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----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=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add myself as Goldfish RTC maintainer until someone else is
willing to maintain it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Document the virtiofsd(1) program and its command-line options. This
man page is a rST conversion of the original texi documentation that I
wrote.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently 9pfs is only taken care of by Greg. Since I am actively working
on 9pfs and already became quite used to the code base, it makes sense to
volunteer as reviewer for 9pfs related patches.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Cc: Greg Kurz <groug@kaod.org>
Message-Id: <E1j04TG-0001xn-JY@lizzy.crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Not all ARM machines sections Cc the qemu-arm@nongnu.org list,
fix this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200120185928.25115-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Modifications to default-configs/hppa-softmmu.mak should be
reviewed by the hppa-softmmu users (currently a single machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20200129190316.16901-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The virtfs-proxy-helper documentation is currently in
fsdev/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a virtfs-proxy-helper manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a virtfs-proxy-helper manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes. In particular I've split the -u and -g
options into each having their own description text.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20200124162606.8787-9-peter.maydell@linaro.org
The qemu-trace-stap documentation is currently in
scripts/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a qemu-trace-stap manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a qemu-trace-stap manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-img manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-img manpage
* part of the interop/ Sphinx manual
The qemu-img rST document uses the new hxtool extension
to handle pulling rST fragments out of qemu-img-cmds.hx.
The documentation of the various options and commands is rather
muddled, with some options being described inside the relevant
command description and some in a more general section near the start
of the manual. All the command synopses are replicated in the .hx
file and then again in the manual. A lot of text is also duplicated
in the qemu-img.c code for the help text. I have not attempted to
deal with any of this, but have simply transposed the existing
structure into rST.
As usual, there are some minor formatting changes but no
textual changes, except that as with one or two other conversions
I have dropped the 'see also' section since it's not very
informative and looks odd in the HTML.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Follow linux-aio.o and stub out the block/io_uring.o APIs that will be
missing when a binary is linked with obj-util-y but without
block-util-y (e.g. vhost-user-gpu).
For example, the stubs are necessary so that a binary using util/async.o
from obj-util-y for qemu_bh_new() links successfully. In this case
block/io_uring.o from block-util-y isn't needed and we can avoid
dragging in the block layer by linking the stubs instead. The stub
functions never get called.
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-6-stefanha@redhat.com
Message-Id: <20200120141858.587874-6-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Aborts when sqe fails to be set as sqes cannot be returned to the
ring. Adds slow path for short reads for older kernels
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-5-stefanha@redhat.com
Message-Id: <20200120141858.587874-5-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need some of the fields without having to poison everything else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
LASI is a built-in multi-I/O chip which supports serial, parallel,
network (Intel i82596 Apricot), sound and other functionalities.
LASI has been used in many HP PARISC machines.
This patch adds the necessary parts to allow Linux and HP-UX to detect
LASI and the network card.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-3-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tests of the dino chip with the Online-diagnostics CD
("ODE DINOTEST") now succeeds.
Additionally add some qemu trace events.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191220211512.3289-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
-----BEGIN PGP SIGNATURE-----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=UUVN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-nbd manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-nbd manpage
* part of the interop/ Sphinx manual
This follows the same pattern as commit 27a296fce9 did for the
qemu-ga manpage.
All the content of the old manpage is retained, except that I have
dropped the "This is free software; see the source for copying
conditions. There is NO warranty..." text that was in the old AUTHOR
section; Sphinx's manpage builder doesn't expect that much text in
the AUTHOR section, and since none of our other manpages have it it
seems easiest to delete it rather than try to figure out where else
in the manpage to put it.
The only other textual change is that I have had to give the
--nocache option its own description ("Equivalent to --cache=none")
because Sphinx doesn't have an equivalent of using item/itemx
to share a description between two options.
Some minor aspects of the formatting have changed, to suit what is
easiest for Sphinx to output. (The most notable is that Sphinx
option section option syntax doesn't support '--option foo=bar'
with bar underlined rather than bold, so we have to switch to
'--option foo=BAR' instead.)
The contents of qemu-option-trace.texi are now duplicated in
docs/interop/qemu-option-trace.rst.inc, until such time as we complete
the conversion of the other files which use it; since it has had only
3 changes in 3 years, this shouldn't be too awkward a burden.
(We use .rst.inc because if this file fragment has a .rst extension
then Sphinx complains about not seeing it in a toctree.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
Add two GitLab job to build the EDK2 firmware binaries.
The first job build a Docker image with the packages requisite
to build EDK2, and store this image in the GitLab registry.
The second job pull the image from the registry and build the
EDK2 firmware binaries.
The docker image is only rebuilt if the GitLab YAML or the
Dockerfile is updated.
The second job is only built when the roms/edk2/ submodule is
updated, when a git-ref starts with 'edk2' or when the last
commit contains 'EDK2'. The files generated are archived in
the artifacts.zip file.
With edk2-stable201905, it took 2 minutes 52 seconds to build
the docker image, and 36 minutes 28 seconds to generate the
artifacts.zip with the firmware binaries (filesize: 10MiB).
See: https://gitlab.com/philmd/qemu/pipelines/107553178
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Claudio's Huawei address has been defunct for quite a while. In
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg06872.html
he asked for his personal address to be removed as well.
I will take over officially.
Cc: Claudio Fontana <claudio.fontana@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-4-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Build index.html for docs
-----BEGIN PGP SIGNATURE-----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=CchM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging
* Move qtests into a separate directory
* Build index.html for docs
# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-12:
docs: build an index page for the HTML docs
tests/libqos: Move the libqos files under tests/qtest/
tests/Makefile: Move qtest-related settings to a separate Makefile.include
test: Move qtests to a separate directory
tests/Makefile: Separate unit test dependencies from qtest dependencies
tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
tests/ptimer: Remove unnecessary inclusion of libqtest.h
tests/Makefile: test-char does not need libqtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When instantiated, this object will connect to the given D-Bus bus
"addr". During migration, it will take/restore the data from
org.qemu.VMState1 instances. See documentation for details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an interface to get the instance id, instead of depending on
Device and qdev_get_dev_path().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
-----BEGIN PGP SIGNATURE-----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=laVP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
# gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (30 commits)
iotests: Test external snapshot with VM state
hmp: Allow using qdev ID for qemu-io command
block: Activate recursively even for already active nodes
iotests: 211: Remove duplication with VM.blockdev_create()
iotests: 207: Remove duplication with VM.blockdev_create()
iotests: 266: Convert to VM.blockdev_create()
iotests: 237: Convert to VM.blockdev_create()
iotests: 213: Convert to VM.blockdev_create()
iotests: 212: Convert to VM.blockdev_create()
iotests: 210: Convert to VM.blockdev_create()
iotests: 206: Convert to VM.blockdev_create()
iotests: 255: Drop blockdev_create()
iotests: Create VM.blockdev_create()
qcow2: Move error check of local_err near its assignment
iotests: Fix IMGOPTSSYNTAX for nbd
iotests/273: Filter format-specific information
iotests: Add more "_require_drivers" checks to the shell-based tests
MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header
qcow2: Use offset_into_cluster()
iotests: Support job-complete in run_job()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Somehow I wrote not full path to the file. Fix that.
Also, while being here, rearrange entries, so that includes go first,
then block, than migration, than util.
Fixes: 052db8e714
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The hw/sd/ssi-sd.c file is orphean, add it to the SD section.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191012065426.10772-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We can use a i440FX without the IGD passthrough host bridge.
Extract it into a new file, 'hw/pci-host/xen_igd_pt.c'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191209095002.32194-6-philmd@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
File tests/acceptance/linux_ssh_mips_malta.py is crucial for
entire MIPS platform, so add it to the MIPS section. The
maintainership will be shared with others.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575982519-29852-6-git-send-email-aleksandar.markovic@rt-rk.com>
Add three files that were recently introduced in a refactoring,
that Malta emulation relies on. They are added by this patch
to Malta section, but they are not added to the general MIPS
section, since they are really not MIPS-specific, and there
may be some non-MIPS hardware using them in future.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1575982519-29852-5-git-send-email-aleksandar.markovic@rt-rk.com>
Change the maintainership for Malta board to improve its quality.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1575982519-29852-4-git-send-email-aleksandar.markovic@rt-rk.com>
Change the maintainership for Fulong 2E board to improve its quality.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1575982519-29852-3-git-send-email-aleksandar.markovic@rt-rk.com>
There should be a person who will quickly evaluate new UI
translation, and find a way to update existing ones should
something changes in UI.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575982519-29852-2-git-send-email-aleksandar.markovic@rt-rk.com>
The r4k machine was introduced in 2005 (6af0bf9c7) and its last
logical change was in 2005 (9542611a6). After that, one can
count 164 maintenance commits (QEMU API changes) with the
exception of 1 fix in 2015 (memory leak, commit 3ad9fd5a).
This machine was introduced as a proof of concept to run a MIPS
CPU. Two years later, the Malta machine was added (commit
5856de80), modeling a real platform.
Note also this machine has no specification except 5 lines in
the header of this file:
* emulates a simple machine with ISA-like bus.
* ISA IO space mapped to the 0x14000000 (PHYS) and
* ISA memory at the 0x10000000 (PHYS, 16Mb in size).
* All peripherial devices are attached to this "bus" with
* the standard PC ISA addresses.
The Linux kernel support for this machine has been dropped more
than 10 years ago in commit 302922e5.
It is time to deprecate this obsolete machine. Users are
recommended to use the Malta board, and its hardware is well
documented.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20191125104103.28962-1-philmd@redhat.com>
This makes it a bit clearer what this is about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
I haven't been doing anything here for a long time, nor does my git repo
still play a role.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <759f8f44-9a01-a9f1-c7cf-65d40151a93a@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@gnu.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We moved all the PIIX3 southbridge code out of hw/pci-host/piix.c,
it now only contains i440FX northbridge code.
Rename it to match the chipset modelled.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move all the PIIX3 functions to a new file: hw/isa/piix3.c.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The hw/pci-host/piix.c contains a mix of PIIX3 and i440FX chipsets
functions. To be able to split it, we need to export some
declarations first.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove mc146818rtc instanciated in malta board, to not have it twice.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20171216090228.28505-13-hpoussin@reactos.org>
[PMD: rebased, set RTC base_year to 2000]
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The PIIX4 Southbridge is not used by the PC machine,
but by the Malta board (MIPS). Add a new section to
keep it covered.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
I'm leaving SiFive in a bit less than two weeks, which means I'll be
losing my @sifive email address. I don't have my new email address yet,
so I'm switching over to my personal address.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0cvU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-10-28
# gpg: Signature made Mon 28 Oct 2019 23:43:11 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
tests/boot_linux_console: Add initrd test for the Exynos4210
tests/boot_linux_console: Add a test for the Raspberry Pi 2
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
.travis.yml: Let the avocado job run the 40p tests
tests/acceptance: Test OpenBIOS on the PReP/40p
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
.travis.yml: Let the avocado job run the Leon3 test
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
tests/acceptance: Send <carriage return> on serial lines
tests/acceptance: Fix wait_for_console_pattern() hangs
Acceptance tests: refactor wait_for_console_pattern
Python libs: close console sockets before shutting down the VMs
Acceptance tests: work around socket dir
MAINTAINERS: update location of Python libraries
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support to handle failover device pairs of a virtio-net
device and a (vfio-)pci device, where the virtio-net acts as the standby
device and the (vfio-)pci device as the primary.
The general idea is that we have a pair of devices, a (vfio-)pci and a
emulated (virtio-net) device. Before migration the vfio device is
unplugged and data flows to the emulated device, on the target side
another (vfio-)pci device is plugged in to take over the data-path. In the
guest the net_failover module will pair net devices with the same MAC
address.
To achieve this we need:
1. Provide a callback function for the should_be_hidden DeviceListener.
It is called when the primary device is plugged in. Evaluate the QOpt
passed in to check if it is the matching primary device. It returns
if the device should be hidden or not.
When it should be hidden it stores the device options in the VirtioNet
struct and the device is added once the VIRTIO_NET_F_STANDBY feature is
negotiated during virtio feature negotiation.
If the virtio-net devices are not realized at the time the (vfio-)pci
devices are realized, we need to connect the devices later. This way
we make sure primary and standby devices can be specified in any
order.
2. Register a callback for migration status notifier. When called it
will unplug its primary device before the migration happens.
3. Register a callback for the migration code that checks if a device
needs to be unplugged from the guest.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-11-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJdt6UAAAoJEO8Ells5jWIRdaAH/3+dufJuFijZY44VYbob92ud
lZR1dYah1fBL1bq0F2siFUb+/wgF1IXHJl9tuUJe8Kp0+hnsXji2s4Iuq5lNQoJj
wwMGziL1TPkhxwgy4jObIC+/bqZVrzAO4Cd+PARrSGAAbAqjxLPizOaf72/t4kdn
C2n87ZlR5k0EOPmUY6Y2DtHtrJ20usSS6EThGhdW7iPSzfQSGiOdRzfZrSiEV2XT
cuKbSzQxk7pbPcz4jIgLzaoA7FIXwm99dBosUkjPszNNFbO4+OPDNdUBanYuqmn/
0ZPe/9YZpEMV64ps/Ab7lx7YB04wZ+A9Etln2JULhBWXg/oyri9gsqgOc6bfCXg=
=uE5S
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Fix incorrect `if` logic
virtio-net: prevent offloads reset on migration
virtio: new post_load hook
net: add tulip (dec21143) driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY
Not implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion
Successfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191022155413.4619-1-svens@stackframe.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As of this commit, NetBSD 4.0 is very old. However it is enough to
test the PRep/40p machine.
User case from:
http://mail-index.netbsd.org/port-prep/2017/04/11/msg000112.html
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-14-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: fixed file name and imports]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Commit 8f8fd9ed introduced the python directory structure, but forgot
to update the path pattern on the MAINTAINERS file.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
If you want to test the machine, it doesn't yet boot a MacROM, but you can
boot a linux kernel from the command line.
You can install your own disk using debian-installer with:
./qemu-system-m68k \
-M q800 \
-serial none -serial mon:stdio \
-m 1000M -drive file=m68k.qcow2,format=qcow2 \
-net nic,model=dp83932,addr=09:00:07:12:34:57 \
-append "console=ttyS0 vga=off" \
-kernel vmlinux-4.15.0-2-m68k \
-initrd initrd.gz \
-drive file=debian-9.0-m68k-NETINST-1.iso \
-drive file=m68k.qcow2,format=qcow2 \
-nographic
If you use a graphic adapter instead of "-nographic", you can use "-g"
to set the size of the display (I use "-g 1600x800x24").
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-11-laurent@vivier.eu>
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of
the 680x0 Macintosh.
This patch introduces only the basic support: it allows to switch from
IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux
driver happy.
It cannot read any floppy image.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
This patch adds basic support for the NuBus bus. This is used by 680x0
Macintosh.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-8-laurent@vivier.eu>
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.
This implementation is based on the MOS6522 object.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
Aleksandar Rikalo wishes to change his primary mail address for QEMU.
Some minor line order is corrected in .mailmap to be alphabetical,
too.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-4-git-send-email-aleksandar.markovic@rt-rk.com>
The TWL92230 is an "energy management device" companion with
a RTC. Since we mostly model the RTC, move it under the hw/rtc/
subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The M41T80 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The M48T59 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Use copyright statement from 80cabfad16 for "hw/rtc/mc146818rtc.h".
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PL031 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
